Cannot send/receive mail locally for cronie [solved]

I installed the heirloom-mailx package so cronie can send messages but I cannot send a test message to myself.
% echo "test" | mailx -s "test message" mags
/usr/sbin/sendmail: No such file or directory
"/home/mags/dead.letter" 9/210
. . . message not sent.
So I installed ssmtp after searching but that does not work either.
% echo "test" | mailx -s "test message" mags
% send-mail: Cannot open wallflower:25
My /etc/ssmtp/ssmtp.conf:
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
# The person who gets all mail for userids < 1000
# Make this empty to disable rewriting.
root=mags
# The place where the mail goes. The actual machine name is required
# no MX records are consulted. Commonly mailhosts are named mail.domain.com
# The example will fit if you are in domain.com and you mailhub is so named.
mailhub=wallflower
# Where will the mail seem to come from?
#rewriteDomain=y
# The full hostname
hostname=wallflower
Thank you for any help you can provide.
Last edited by maggie (2013-10-05 15:21:00)

http://unix.stackexchange.com/questions … y-for-cron
Edit: Tried https://aur.archlinux.org/packages/dma/ - works:
$ ls -l /usr/bin/sendmail
lrwxrwxrwx 1 root root 3 Oct 2 01:23 /usr/bin/sendmail -> dma
$ echo "foo" | mailx -n -s "test" karol
$ mail
Heirloom Mail version 12.5 7/5/10. Type ? for help.
"/var/spool/mail/karol": 1 message 1 new
>N 1 karol@black Wed Oct 2 01:25 17/447 "test"
Last edited by karol (2013-10-01 23:28:30)

Similar Messages

  • Cannot Connect to Port 26 - Cannot Send/Receive Mail

    I have Maverick on my MacBook Pro.
    All of a sudden, with NO CHANGES MADE to my system, my email no longer works. I cannot send or receive. I get the error:
    ===========
    The server “mail.mydomainnamel.com” cannot be contacted on the default ports.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
    Sending from: [email protected]
    =============
    I use port 26 to send. Receiveing is mail.mydomain.com
    OSX recently updated. Could that of screwed up my settings or broke something?
    My internet proider says the issue is not on their end.
    Any help would be appreciate.
    Patrice

    Ok, I rechecked my router page by page and have found one solution .. .the https management page of the router defaults to 443 - so have changed that to 4443, rebooted router and can now access my http://mydomain/owa - so that is good.  However, still
    cannot telnet to port 25 on the exchange server from external.  The port forwarding is definitely correct for port 25.
    I have rechecked the receive connector:  MAIL FLOW -  RECEIVE CONNECTORS - DEFAULT FRONTEND SERVER
    and under security - anoymous users is checked.   That SHOULD let me connect yes?  But it does not.
    Where else does this need to be changed - can you advise?
    regards
    steve

  • Cannot send/receive mail and stored notes disappeared

    Suddenly lost all stored notes-theicon is there and i can make new notes, but all of my stored ones disappeared along with my mail stopped coming and going.  I have powered on and off several times, deleted and reset email account, and I still cannot get or send mail!  I received mail this morning, then out of nowhere it stopped.  I was unable to send emails for the past few days as well.  I only did the ios6.1 update after noticing these problems this morning, hoping that would restore my emails and notes but it did not.  Help??

    if your syncing notes with icloud go to settings>icloud turn notes off and then back on.
    also log in to icloud.com from a computer and check to make sure your notes are there.

  • Outlook 2010 cannot send/receive mail AND states mailbox is being optimized due to upgrade AND outlook hotmail connector needs updating.

    As of 2014-March, the same thing happening on my system. This seems to have occurred, after the latest batch of 28 patches (including SP2 - KB2687455) from Microsoft Updates applied on 13-Mar-2014 and 19-Mar-2014.  I have been running Outlook 2010
    since it was first available.
    An unhelpful error is thrown, after trying to manually perform a Send/Receive:
    Not Implemented
    While in Outlook 2010, clicking FILE > INFO reveals the following warnings in red:
    "Upgrade in Progress. Your mailbox is currently being optimized as part of upgrade to Outlook 2010. This one time process may take over 15 minutes and performance may be affected while the optimization is in progress."
    There's an "Upgrade Now" button but it fails to produce any visible result. Next to the button, another warning in red:
    "You must upgrade to the latest version of Outlook Hotmail Connector to continue using this e-mail account."
    Again, I do not have the Outlook Hotmail Connector installed. Nor have I recently upgraded to Outlook 2010.
    I am unable to access ANY account settings, as well as poll my various mailboxes.
    While reviewing the list of installed updates (Control Panel > Programs and Features > View Installed Updates), there are 28 approximate patches -
    specifically, Service Pack 2 (KB2687455) - that were recently applied to Microsoft Office Professional Plus 2010.
    Microsoft, what the #$%# is going on?
    I've read some related posts that suggest the core issue is other than what Outlook is reporting.  The posts recommend the following.  However, in my case, the below steps did not correct the
    issue.  In fact, the new profile would not allow me to view/manage the associated accounts or data files.
    (1) Remove your current Outlook Profile. No worries - this doesn't affect your mail data (.PST files):
    http://office.microsoft.com/en-au/outlook-help/remove-a-profile-HP010356455.aspx
    (2) Create a new Outlook Profile:
    http://office.microsoft.com/en-au/outlook-help/introduction-to-profiles-HA010355553.aspx
    Note: Outlook complained "An unknown error occurred, error code: 0x80040154."  However, exiting the Mail config window and relaunching shows that the new profile is intact.
    (3) If you previously had the Outlook Hotmail Connector installed, reinstall it.  If not, then just ignore and the warning should go away after creating a new Profile.
    32-bit connector: http://www.microsoft.com/download/en/details.aspx?id=24677

    I was able to resolve this issue as follows.  However, why it occurred is unknown at this time and
    unrelated to a corrupted Outlook Profile, as mentioned on my prior post.  It seems highly probable that it was caused by the recent batch of Microsoft Updates for this product which included Service Pack (SP) 2.
    1) Performed a "repair" of Outlook 2010, via the Control Panel > Programs and Features.
    2) Rebooted.
    3) Prior to launching Outlook, returned to Control Panel > Mail and configured the location of my PST file (not in default directory).
    4) Had to reestablish as off my mail accounts, settings/preferences/etc. This step was the most tedious and frustrating.

  • Cannot send/receive mails anymore with BB9300

    Hi, since the last 2 weeks, mails do not arrive to nor leave anymore from BB 9300.
    When I try to change my mail address, I cannot access the server
    Error message is "your terminal encounters a problem when trying to connect to the application server"
    What should I do to fix the problem ?
    Thank you

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Delete and Resend Service Books (pre-BB10 devices only)
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    If you have no CMIME entry, then skip the deletion
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Cannot send/receive mail on POP or httpmailm

    A couple weeks ago I had no problem with sending/receiving hotmail using the httpmail 1.5 plug in. I have NEVER been able to configure a POP account.
    Having two MacBooks side by side with the same OS 1.5.3 the other mac book was able to configure. I used the utility and checked permissions, this is when the httpmail stopped.
    Now what??

    The plugin no longer works and will not be updated.
    http://sourceforge.net/forum/forum.php?forum_id=818174

  • Icloud won't let me buy more storage and I am full, cannot send/receive mail!

    I lost my icloud free storage today and cannot get mail.  Each time I try to buy an upgrade, I get an error that my credit card is incorrect, or that credit card processing isnt available.... I'm stuck!

    What happens when you try to delete old backups?

  • Cannot send/receive mail on POP account

    Sorry I read previous threads about hotmail.
    I have been trying to configure a pop account and an exchange account and have been unable to do such. Using a different macbook with OS 10.5.3 I was able to successfully. Any ideas what the issue might be or how to resolve?

    Hi! If you have done it successfully on another Mac then use it to confirm the settings on each mail setup page including the advanced options to make sure every field is correct. Tom

  • TS2755 since updating to ios7 I can receive e-mails, but cannot send e-mails from my phone

    since updating to ios7 I can receive e-mails but cannot send e-mails from my phone

    Hi there ritawilk,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    -Griff W. 

  • I cannot send e mails on my iphone 4, receiving  is o.k., error message "sdoeserver does not recognize recipient"

    I cannot send e mails on my iphone 4, receiving is o.k. I get error message "server does not recognize recipient"

    Have you check to make sure the email address is correct?

  • I can receive but cannot send e-mails!

    I have a gmail account; I can read the incoming mails but cannot send outgoing mails. I get the following error message:
    The SMTP server “smtp.gmail.com” rejected the password for user “XYZ"
    XYZ = my name.
    The password is correct because I can access my gmail account by using the relevant website.

    In your server setytings do you have XYZ or [email protected] as the User Name? What Authentication: do you have?

  • I receive emails but cannot send e mails

    I have no trouble receiving e mails but I cannot send e mails
    This problem has just recently occured

    Hi,  I'm getting the same problem. I just replaced my old Ipad to new one, and the configurations are exactly the same,
    But when I send an e-mail, there is a message telling that this message was not sent . It was generated one copy into out box, and doesn't send. Still there.
    Smtp is the same, the pop3 also. I receive all e-mails but can't send any.
    Regards,

  • TS3274 how come all of a sudden, I cannot send/receive messages, but I can receive e-mails in my Ipad?

    HOW COME I CANNOT /SEND RECEIVE MESSAGES, BUT I CAN RECEIVE EMAIL?

    Sending and receiving messages has absolutely no relation at all to sending and receiving email.
    Your iPad is not a cellular telephone.  It cannot send or receive SMS text messages.  It can only send or receive iMessages, which are messages to/from other Apple devices (only) on a WiFi or a cellular network that supports iMessage.

  • Since upgrading to IOS 8.1.2, I cannot send/receive emails from either of my Apple or Verizon email accounts.  Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts.  I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Hi Milrclan,
    Thanks for contributing to the Apple Support Communities. 
    If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Best Regards,
    Jeremy 

  • Send/receive mail

    Our application needs to send/receive mails from a mail server in NT
    environment. Does forte provide SMTP and POP3 protocol support(libraries)
    so that we can use external connection class to connect to the server and send/
    receive mails or do we have to use third party controls. Any help would be
    appreciated.

    I think with the .mac account that is a known bug, and just click ok, at least that is what I do. I would assume the same with your cable ISP. Let's hope that is solved with 10.5.2
    As for your accounts being offline I also get the same behavior, either when I reboot my internet connection but Mail is still opened or randomly for certain accounts. I have only found that either waiting for a while or quitting Mail and opening again will work. Again, let's hope whatever strange behavior here is fixed with 10.5.2
    I know I am not offering any solution here, just confirming that others are experiencing the same behavior.
    hope this helps

Maybe you are looking for

  • PIX FLIX doesn't work

    I have gotten 2 messages: You've got a FLIX message!  To see it, visit vzwpix.com from an internet accessible computer & follow the directions.  You have not been billed a PIX-FLIX charge for this message I did and got some goofy message about Verizo

  • Distributed Forms Cannot be Opened (error) - Acrobat X / Reader XI

    Our document control department uses Acrobat X while all other users in the organization use Adobe Reader (XI for the most part).  It has been an absolute headache trying to simply distribute a form to Reader users and enable them to return it via th

  • Itunes : Ipad does not appear as device

    I have this annoying problem since udating to ios6 When i connect my ipad to my Mac itunes cannot find it. There is no devices tab. Yet, for some reason itunes did detect an app installed on the ipad and synced it over..

  • Multi Media Audio Control

    I have just recieved my new X-FI Exteme Gamer and installed it into my system. Currently I am running Vista Home Premium 64 bit and have down loaded all the current updated files from the Creative website. However I cannot get the device working as a

  • Arrow and Hand tool question/problem

    The pointer tool is selected in the tool bar but when I go into the Timeline it defaults to the Hand tool. So when I try and resize the clip length, for example, I can because the Hand tool moves the whole screen. Its only starting doing this is ther