Cannot send SMTP through Outlook

I cannot send mail through Outlook when I am connected to my WRVS4400N router.  If I drop the router it sends fine so it's not my ISP.  I can also telnet to the SMTP server.  Any ideas???  I have gone back to factory defaults and still nothing.  I am trying to use a godaddy relay on port 25.  Someone please help.

mfarris wrote:I'm confused...I have to config port forwarding to send SMTP traffic out? I don't think I'm blocking any outbound ports.
mfarris wrote:I'm confused...I have to config port forwarding to send SMTP traffic out? I don't think I'm blocking any outbound ports.
Don't know if you resolved your issues yet , but I was having the same problem. Heres what I posted. I've been reading these forums for some help regarding not being able to send email from Outlook. I tried everything that was posted here and nothing resolved my issue. Router was configured correctly, latest firm-ware, tried disabling all of my firewalls, bypassing the router and connecting directly through my modem, changing router settings as suggested... nothing. I then deducted that because I still couldn't send emails just going through my modem, it wasn't at all a router or fire wall issue. I did some research on ISP's and port 25...the port for send/receive emails. Heres what I found out and the changes the cleared up all of my issues. Many ISP's are blocking port 25 due to being overloaded and not telling their customers...like ME! Port 25 is the ISP's front line for blocking spam. If port 25 is blocked, you cant receive or sometimes even send email. To find out if your port 25 is indeed blocked, go to this web page and let it run. It might take a few minuets but it's a free diagnostic port scan and will tell you which ports are blocked. http://digconsys.com/testdir/portscan.html If port 25 is blocked, there are a few others that you can use and they are easy to change. The other ports for email are port 587 and port 1025. Port 587 is the most common ISP's recognize and this one worked for me. To change your port in Outlook, and I ASSUME in Outlook Express, do the following. Open Outlook Go to "TOOLS", choose "ACCOUNT SETTINGS" and double click on your account(s)to open. Choose the "MORE SETTINGS" tab and then click the "ADVANCED" tab. Here, you will see the "OUTGOING SERVER(SMTP)" it will be set to port 25. Delete 25 and replace it with 587. Hit "OK" ad then click the "TEST ACCOUNT SETTINGS". You should have successfully sent a test email to your self. If 587 didn't work, do it again and replace it with 1025. Port 587 works like a charm for me. I hope this helps some if not all of you out that are having the same issue as I was. I was ready to punt my laptop into the next state! Please reply and let me know if this fixed your send/receive issues. Chris

Similar Messages

  • Can't Send Email through Outlook using blackberry as a modem

    I am using my blaclberry 8900 as a modem and cannot send emails through outlook. I have called t-mobile and they say that it cannot be done. However I could do it with my Nokia. Any suggestions?

    Outlook folder permissions are Outlook issues, try the Microsoft Outlook Forums.

  • Cannot send email from outlook 2011 (Mac) on public networks but can send via  Mac Mail

    I cannot send mail with Outlook from anywhere other than my work or home network, will not work even when accessing 4g with my phone hotspot; very frustrating. I am using Yosemite & Macbook Pro (2012). if i use the Apple Mail everything works fine so I can only assume it is a setting on Outlook?

    Update - I now have it working.
    am not really sure what exactly fixed it.
    I changed a lot of things but my setup now has the following which I think fixed.
    outgoing server  - p06-smtp.mail.me.com
    override default port checked - port now 587
    on more options button changed it to "use incoming server info".

  • Cannot send mail through Windows Live Mail with 3rd party email address

    I know this problem has been thoroughly discussed, and I basically understand it. I  must change my outgoing port to 587 on my two non-Verizon email accounts that I pull into Microsoft Mail along with my Verizon mail. One of the accounts is my web site email with Network Solutions, and one is an email address through Onebox.com.
    When I used port 587, neither worked to send email through Outlook Express or Windows Mail. I called Onebox. and was told to use (for them) port 465, which did not work to send, either.
    I have not called Network Solutions yet. I did call Verizon Support, however, and the support person tried to find the solution. Finally, he told me I need to call Onebox again (and Network Solutions).
    I am just checking to see if there is something I missed that anyone knows of. I would really like to consolidate my mail on my computer...it will be complicated if I cannot.
    Thank you,
    Laurie Bishop

    What error did you get when you tried port 465?
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Cannot send mail through Hotmail on iPad

    Cannot send mail through Hotmail on iPad, it's ok through bigpond though. I have tried deleting account and shutdowns x 2 but still nothing.
    The message which appears is telling me the user name or password "SMTP:           @[email protected]" is incorrect.
    Thanks, Ron

    Yahoo's been having persistently random issues for months. You can try just waiting it out, or delete and readd your yahoo account. When my accounts were affected I just used webmail to access my yahoo accounts until it cleared up.
    Chances are it's all on their end and really all you can do is wait it out.

  • TS3276 i cannot send mail in outlook or the mail app; my account is roadrunner.

    I cannot send mail in outlook or on the apple mail app; my account is through roadrunner.  I receive mail no problem.

    Read the threads over in the "More Like This" column over here.----------->
    Have you contacted Roadrunner and Outlook tech support?  If not, why not?

  • About send mail through Outlook Express

    I send mail through outlook . but system shows "your server has been terminate suddently. The possible reasons include servers error , NetWork error or long time among inactive status ." I promise the setting of POP3 and SMTP is right. Who can help me ? thank you.

    I would start first with, do you know that the smtp setting for your server actually points to a Sun Java Enterprise Messaging Server?
    what do you get on a command line when you do:
    telnet <what you have for smtp> 25
    ?

  • Cannot send emails via outlook 2011

    I have an iMac and I cannot send emails via outlook 2011. I get an error code 3210. Can anyone help?

    Does not help.. my problem is a little different
    I have an iMac and I cannot send emails via outlook 2011. I have 3 emails stuck in the sent box... They are not in my sent or inbox. Every time I send an email it first tries to send these 3 mails. for 2 I get an error code 3210 and for one "5.1.2 or other punctuation after the recipient's email address. g5sm23942864eem.4". I have an euronet account and not a hotmail account.

  • TS3899 I can recieve emails but cannot send emails through my iPad for my Comcast email account. I believe I have all setting aligned properly. Anyone else have this problem?

    I can recieve emails but cannot send emails through my iPad for my Comcast email account. I believe I have all setting aligned properly. Anyone else have this problem?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • Outlook 2010 address book prompt out hen trusted program try to send email through Outlook 2010

    Dear all,
      My program will send email through Outlook 2010(in cache mode). Sometime it may prompt the address book out and pend here, and we need to manually click "OK" to let the program run again. Although we re-write the program in
    Java and send by JavaMail now, but we are interested why the address book will prompt out.
      There are no pattern that we can guess the reason. Different recipient, different subject/content/have attachment or not can casue the address book prompt. But same email with same content/everythings may not cause prompt before and/or after.
      We try to change to offline address book and need manual sync, problem still occur.
      Just for interest~
    Cyrus
    [Sorry that MSDN not allow me to upload the cap screen :( ]

    Firstly, there is no such thing as a "trusted program" to Outlook. It only trusts COM addins, all other applications will cause a security prompt unless you have an up-to-date anti-virus app installed (if you can control the client environment).
    See http://www.outlookcode.com/article.aspx?id=52 for the list of your options. Essentially it is either installing an antivirus product or using a library such as
    Redemption (accessible from Java) or a utility such as
    ExpressClickYes.
    Dmitry Streblechenko (MVP)
    http://www.dimastr.com/redemption
    Redemption - what the Outlook
    Object Model should have been
    Version 5.5 is now available!

  • Sending email through outlook

    Hi,
    i got a email functionality requirement , i need to send the report output to recipient inbox as an attachment, through outlook.
    i know how to send email from sap, but through outlook i am not aware,
    how to send email through outlook.
    can any one please help me.
    Thanks In Advance
    raagati

    Hi,
       check below link.
    How to send email from outlook to SAP inbox

  • Cannot send email through yahoo on iPad 4, apple.smtp.mail.yahoo not available as of December 1, 2012

    I am unable to send emails through yahoo on my ipad 4 wifi, just starting over the weekend. My 3 other non-yahoo email accounts are working fine on my ipad. When I try to send an email from the yahoo account, I receive the message that the connection to the outgoing mail server "apple.smtp.mail.yahoo" failed. I can send email through yahoo just fine on the web and on my computer through Thunderbird.

    Yahoo's been having persistently random issues for months. You can try just waiting it out, or delete and readd your yahoo account. When my accounts were affected I just used webmail to access my yahoo accounts until it cleared up.
    Chances are it's all on their end and really all you can do is wait it out.

  • Cannot send emails when outlook through another IS...

    When I am abroad I try to use Outlook to access my emails via whatever ISP is provided by my hotel. I can receive mails fine but I cannot send. I have tried changing default settings for outgoing mail with no success.

    You may have to use webmail instead, as the BT mail server will probably reject SMPT requests from outside of the BT network, to prevent spam.
    This may help
    http://bt.custhelp.com/app/answers/detail/a_id/10903/~/how-to-verify-email-addresses-%28to-avoid-get...
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Sending Mail through Outlook using PL/SQL

    I have installed Oracle 9i (9.2.0.1) on Windows Xp with SP 2 platform. My MS Outlook has been configured.
    How could i send mail through Microsoft outlook by using PL/SQL Program.

    How could i send mail through Microsoft outlook by using PL/SQL Program.Nonsensical question. MS Outlook is a mail client. A PL/SQL program is also a mail client.
    Both these need to talk to a mail server. It does not make sense for one mail client to "+talk+" to another client for passing it e-mails that need to be send.
    The mail client talks to a mail server using the SMTP ( Simple Mail Transfer Protocol ). There are also other protocols such as IMAP (open standard) and MAPI (Microsoft proprietary).
    Oracle's PL/SQL environment by default supports SMTP via the UTL_SMTP, and UTL_MAIL packages - these provide the PL/SQL developer with an interface to use to send e-mails.
    MS Outlook (client) does not feature anywhere in this regard, whereas MS Exchange as a mail server will (assuming it is being used on your network).

  • Cannot Send Email Through Hotmail iOS 5 iPhone 4

    Hello,
    I just got a new iPhone 4 with iOS 5.  I've previously had a 3G and I own an iPad.  Both of which I've activated and sync'd my hotmail account to.  The issue I"m having is that I can receive emails on my phone from my Hotmail account however, when I go to send an email or reply/forward and email from my hotmail account on my phone I get an error that says " Cannot Send Mail  No password provided for SMTP:[email protected]@smtp.live.com.  Please go to Mail Account Settings and enter a password."
    I do have my password saved hence I can receive new emails, however there is no section that allows you to input a password for the outgoing mail server smtp.live.com.  It only allows you to select the type of authentication to use.  Password is default.
    Any help would be appreceiated.
    Thank you,

    Delete the account and set it up again using the provided Hotmail template.

Maybe you are looking for

  • Now the vidieos won't play on any of my iPhoto shows or library.

    Can you help me. I downloaded picturs and videos into my iPhoto program and made a slide show up. It has mostly stills and some short videos and music. It was running great and I downloaded it to some thumb drives for people on the trip. Other shows

  • Major crash happening with icloud

    three visits to the genius bar and 3 phone calles to senior advisor and no answer to my problems Whats wrong with this picture. having a meltdown on iphone and imac at same time-I cloud people supposedly are getting backto me but 2days gone by and no

  • Multiple programs crash using a Save As dialog box, suspected cause is interaction of machine with Robohelp

    Hi all, Apologies if this is in the wrong area, it could also be related to RoboSource Control. I have a problem with my entire system. I am getting regularly kicked out of programs when I try to add an attachment or save something. It occurs when a

  • Can't delete line due to hyperlink error

    I am trying to delete a line in my document however the program does not let me and instead says "The object you have chosen is already in use by another hyperlink". But the line doesn't have a hyperlink on it! I need this line deleted but for the li

  • User created from SUS email...

    Hello all, when the system sents email notification via email to the vendor, what is the follow action in the system? Vendor can create users for him? Which data I need to put in the User, password and other values in the form? I tried with same data