Cannot send XML request message - TREX doesn't return FQDN

Hello all,
is there any way to configure TREX, so that it always returns it's FQDN?
I get the following error message from our SAP XECO (Shop) Java System.
Full Message Text
Object with category com.sap.isa.catalog.trex.TrexCatalogServerEngine could not be instantiated. Reason: cannot send XML request to http://saptx3:30305/TREX; reason: saptx3 (Errorcode 7262)
The problem is, that TREX doesn't return it's FQDN.
The TREX service as such is correctly configured in TREX Service "nameserver.address", "tcpip://hostname.domain:30301".
I added the line
SAPGLOBALHOST=saptx3.domain
to the sapprofile.ini file. This didn't do the trick, unfortunately.
Thanks a lot for your advice !
Best Rgs,
Thorsten

HI Thorsten,
Please ensure that your setting match that of note: 1479923 -  TREX: Queue server missing in KM TREX Monitor
and also please check the following:
Also do you have any proxy or firwall between TREX and the portal?
It can to be that the problem is related to the proxy configuration in
the Portal. Could you please check if you specified proxy in the
System Administration -> System Configuration ->Service Configuration->
Applications (Content Catalog) -> com.sap.portal.ivs.httpservice ->
Services -> Proxy
If a proxy server is entered there, you have to enter the TREX host in
the http - bypass Proxy Servers.
many thanks
Orla.

Similar Messages

  • Since upgrade to iOS 7 Email error on over 100KB emails "Cannot Send Mail  The message was rejected by the server because it is too large." Connecting to Exchange via Activesync

    Hi,
    Following the upgrade to iOS 7.0.3 on all our iPhone and iPad devices, it has been identified that when sending emails around 100KB in size and over an error message appears on the device stating “Cannot Send Mail  The message was rejected by the server because it is too large.” See error message below. The send/receive limit is over 10MB so this is not the issue.
    We are in an Exchange Environment using Microsoft Activesync. This issue is not evident in iOS 6. This has been tested on an iPhone 3GS running version iOS 6.1.3. We have been unable to repeat the issues seen on iOS 7 on the older OS. It is not possible to roll back to the older operating system as Apple are no longer signing the software.
    We use Microsoft Active Sync to connect to our Exchange servers through a TMG. The issue is very inconsistent, some identical emails go through, some fail. This is not an issue with the send/receive limit as this is over 10MB. The error message when it fails on the TMG is Status: 413 Request Entity Too Large, which we believe is from IIS on the CAS server.
    Does anyone have any suggest course of actions to take?
    Many Thanks

    This resolution have to attend at the server not with the ios device. My employer's mail administrator reject me to correct it from the server. As his concern is, if ither ios devices works why don't mine? So I am helpless than changing my iphone. It works fine for early versions of ios and with androids. And also one of my friends iphone4 with ios 7 (similar as mine) works too. So I guess it's something wrong with my iPhones settings. But basic question I cannot understand is it works in my phone before this ios7 upgrading. And currently working with my yahoo account too. Favourable reply expected.

  • I cannot send or receive messages on iMessages since password reset.

    I forgot the password to login to my Mac and had to reset it using my Apple-ID. Prompts then came up asking me to put in my icloud/facetime etc passwords. I had to figure out my old password in order to login to the Apple keychain or something to be able to automatically login to the Wifi and such. I did manage to recover my password and everything seems to work fine now except iMessages though, which I didn't realize until someone sent me an iMessage that I never got and I noticed that I also couldn't send any messages back even though I was connected to the internet. I tried logging out of iMessages and back in, but that only made things worse as I couldn't even log back in and had to change my Apple-ID password to log back in (because putting in my Apple-ID for the iMessages password in the prompt that came up after I put in my Apple-ID password didn't work). Now I am logged back in but still cannot send or receive messages.

    I have restarted and now I realize that I am still having the issue with not being able to access the keychain "login", so I get 3 options, to either continue, create a new keychain or update the keychain password. According to some Apple page I found the password for the login keychain should be the old password (which I forgot). Even though I recovered this password, this doesn't work. I also tried my original Mac password, and my Apple-ID password. I don't know what else it could be. Should I just make a new login keychain at this point?

  • Cannot send any text messages

    hi! can anyone help me? i cannot send any text messages on my 5700. even checking on my balance, i can't even sent it. I tried to do the factory settings but that doesn't work too. there's an error saying that:
    general: memory full. close some applications and try again.
    I erased all my messages in my inbox and in sent messages. I even deleted some applications to my phone. And my phone memory and memory card are not also full.
    please... i really need help...
    tnx!
    hiei0006

    11-Dec-2007 11:03 AM
    hiei0006 wrote:
    hi! can anyone help me? i cannot send any text messages on my 5700. even checking on my balance, i can't even sent it. I tried to do the factory settings but that doesn't work too. there's an error saying that:
    general: memory full. close some applications and try again.
    I erased all my messages in my inbox and in sent messages. I even deleted some applications to my phone. And my phone memory and memory card are not also full.
    please... i really need help...
    tnx!
    hiei0006
    yeah even i've been having the same problems.. General:memory full. close some applications and try again. tried resewting the phone nut to no avail..

  • I am trying to email pictures from my ipad to my email address on my computer and I have been going along nice but now I get a message that says "cannot send mail the message was rejected by the server"  can't see to figure out why it stopped sending now.

    I have been emailing pictures from my ipad to my computer and have been going along nicely and now when I went to send 5 pictures to my computer from my ipad I am getting a message that says " cannot send mail The message was rejected by the server"  cannot understand why this is happening and have not been able to fix.  Now when I try to send pictues even to another email address I am getting the same message.
    Help.

    Email may not be the best way to move pictures.
    There are lots of ways of moving files.
    A simple and popular way to copy files and share files among your devices.
    https://www.dropbox.com/
    "Box lets you store all of your content online, so you can access, manage and share it from anywhere. Integrate Box with Google Apps and Salesforce and access Box on mobile devices" Rated the most secure cloud storage by SkyHigh Networks.
    https://www.box.com/
    Using iTunes to transfer files:
    http://support.apple.com/kb/HT4094?viewlocale=en_US&locale=en_US
    Files Connect -- "Cloud Storage services like Dropbox, MobileMe iDisk, Google Docs/Picasa, Facebook photos, FTP, SFTP, WebDAV ... AFS (Apple File Shares) SMB (Windows shares)  protocols"
    https://itunes.apple.com/us/app/files-connect/id404324302?mt=8
    Windows File server
    http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
    "The kiteworks mobile file sharing solution provides secure creation, viewing, and sharing of enterprise content on smartphones and tablets while providing IT and security teams the administrative controls to manage user privileges and access rights necessary to ensure enterprise security and compliance."  " Includes choice of private cloud on-premise."
    http://www.accellion.com/solutions/mobile-enablement/mobile-file-sharing
    "Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
    http://www.tidal.it/?page_id=309&lang=en
    http://www.msec.it/blog/?page_id=11

  • I dropped my Iphone 5 which resulted in it shattering and the screen was still on but it was black with only a white line through it so I couldnt access the phone however I switched over to my Droid and now I cannot send or receive messages?

    I dropped my Iphone 5 which resulted in it shattering and the screen was still on but it was black with only a white line through it so I couldnt access the phone however I switched over to my Droid and now I cannot send or receive messages and I cant turn off imessage because I cant see anything on the screen.  Help?

    Then the bottom of the support document states that if you do not have access to the device (which unfortunately because of the screen issue you do not) to contact Apple Care. That is what you need to do.

  • Games centre: Cannot Send Friend Requests

    When I try to add a friend on my iphone 4 I get this:
    "Games centre: Cannot Send Friend Requests
    You are not allowed to send friend requests on this device"
    Why not? How can I play a game against a friend?! How can I invite my friend?
    Help please!!!!

    I've done that. Now if I go to General>Settings>Game Centre I can only see:
    Apple ID
    Allow Invites
    Nearby Players
    Game Centre Profile
    Contacts
    Facebook
    I swear before I reset I had an option to add friends but I can't find it now. If I go the the app (in this case "Fourinarow" and select the multiplayer online option and then try to invite a friend, firstly I can' see a list of anyone - but that's fine I presume as I've never used it before, but then if I search for my friends username ... nothing happens!

  • RegTask: Failed to send registration request message. Error: 0x80040231

    Hi,
    i am getting the below error ClientIDManager.log
    RegTask: Failed to send registration request message. Error: 0x80040231
    RegTask: Failed to send registration request. Error: 0x80040231
    Error initializing client registration (0x80040222).
    Please let me know how can i solve the error.
    Regards,
    Boopathi

    Checked this ?
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/235b795b-442d-4d72-aff0-642d3714ee48/sccm-2007-sp2-mixed-mode-failed-to-send-reqistration-request-message-080040231
    Arnav Sharma | Facebook |
    Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
    reading the thread.

  • Updated to ios 6.0- now I cannot send photos via messaging - how to solve this?

    I updated to ios 6.0 - now I cannot send photos via messaging, although text will send - how to solve this? 

    Make sure MMS is enabled.
    Contact your carrier to make sure MMS is provisioned on your account.

  • I cannot send out text messages

    I cannot send out text messages - I can receive them - cannot send them to a contact.
    This contact has a multiple contacts ranging from gmail to facebook.  I deleted all the contacts and now the contact can receive my text messages.
    I noticed a small x in a circle to the right of the contact's name. A red x in a circle would appear and say my text messages not sent. I would resend - nothing changed. 
    Does anyone know why this happens and how I can fix the contact so I can text without getting these messages.
    The contact is not blocking me by the way - it is my spouse LOL
    Thank you

    Thanks to draya06 for your response.
    Please try deleting all text messages from this person and resend. Do you have a signature on your outgoing text messages? If so please remove the signature and retry. If these don't work please PM me and we will further troubleshoot this issue.
    Thank you

  • I cannot send or receive messages

    On iPhone 4, I cannot send or receive messages. In the settings, send and receive, it will not let me select my phone number.  Also keep getting error messages when trying to connect to iMessage. If I turn it off, I still cannot send or receive messages

    The phone number is always gray and so is mine. Is there a ticked mark next to the phone number?
    If you switch off iMessage and you cannot text then it's certainly your carrier's problem because SMS & MMS are carrier features. Not everyone has an iPhone with iMessage configured so SMS & MMS should alway worked as long as your text & data plan are properly provisioned.
    Delete the Messages app from multitask-list and do a reset :
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    Troubleshooting iMessage:
    http://support.apple.com/kb/TS4268

  • Cannot send or receive messages from specific buddy

    I cannot send or receive messages from one specific buddy. When I go to double click on the name on my Buddy List, nothing happens. When she sends me messages I am alerted of the message but cannot see it. In the "Window" tab her name appears as if we are chatting but I cannot view the window.
    Help!

    Sounds like they have not got the ports open to allowing Incoming stuff to their computer.
    Any router firewall or basic settings they have may allow the outgoing call but not accept any incoming stuff.
    10:22 PM Saturday; December 6, 2008

  • I cannot send a text message now without attaching a picture, I could before but ever since I attached one pic it will not let me just send text

    I cannot send a text message now without attaching a picture, I could before but ever since I attached one pic it will not let me just send text

    Settings>Messages>Show Subject Field>Off.

  • I cannot send a text message to anyone with an android phone. Any suggestions?

    I just got an iphone. I cannot send a text message to anyone with an android phone. I have tried turning imessage off and also wifi off. Any other suggestions? Most of my family including my husband currently have android phones and I need to be able to talk to them. I can send messages to iphones and ipads but not their phones. What can I do??

    I don't see the "Start new conversation from:" I spent 1 hour and 40 minutes last night on the phone with Verizon. We completely reset the phone after backing it up to icloud. His conclusion was I need a new SIM card and I will not be able to go take care of that until tonight. I don't know if that will fix it or not but that is what he said...

  • Since I have arrived in south Africa I cannot send or recieve messages ,I was in the uk and Europe and had no problem ,I have tried to reset to no avail any ideas

    Since I have arrived in south Africa I cannot send or recieve messages ,I was in the uk and Europe and had no problem ,I have tried to reset to no avail any ideas

    What model iPod
    Identifying iPod models
    http://support.apple.com/kb/HT1353What iOS version  (Settings>General>About>Version)
    What computer OS and version? I suspect a Mac with OSX 10,5,8
    Whart version of iTunes?
    A Mac with OSX 10,5.8 should synce but not restore with iTunes version 10.6.3
    iTunes 10.6.3
    To restore you need iTunes 10.7 or later and that requores OSX 10,6,8 or later

Maybe you are looking for

  • Photos uploaded to my Web Gallery show up where in iPhoto??

    I created a Web Gallery and asked my family to add to it - which they have done. I see the photos in iPhoto under the 'MOBILEME GALLERY' in the sidebar - but they are not in any of the Events. When I try to manually add the photo, it says it's alread

  • Re-calculation of depreciation for closed FY

    I have changed the depreciation key to calculate depreciation to the day. The program AFAR allows one to re-calculate depreciation only for the currently open FY and not prior yrs.  I am happy for the re-calculated values to be posted to the currentl

  • Inbound Delivery: Output Missing

    Hi Gurus, I am encountering problems with the initial display of Inbound delivery (VL33). The output does not appear in the header portion. Here's the scenario: 1. Inbound delivery created using the PO with output details (VL31). 2. But when I initia

  • New to MAC, trying to install CANON MP520

    Hello, I'm new to MAC, I bought an iMAC 8,1 several days ago with operating system 10,5 (I guess?!...) I'm still struggling to get rid of old window-habits, but first days working with this machine was fun!... until i tried to install my new flashy p

  • Linux Install - ulimit, dbconsole

    Hello- brand new install of 11g Standard Edition on Ubuntu Linux... I read a helpful startup script and entered most all of the configs by hand before install.. reading the logs I can see that oracle starts up and has been configured.. though the con