Cannot set default web template

Hi
I'm trying to set default web template through SPRO -> IMG -> Sap NetWeaver -> B.I -> Settings for reporting and analysis -> Bex Web -> Set standard web template -> Ad hoc analysis.
It works fine in Dev, but in Production the system seems to ignore the setting!
Even when I write a dummy template that doesn't exist I get no error message !
Please advice
Regards
Shlomi

D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us.

Similar Messages

How to set default Web Template for BEx Query iViews in Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE

Hi,
I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
Cheers,
Dion

How to set default Web Template for BEx Query iViews in BI Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE
(I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)

D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us.

Setting up Default web template for BeX 7.0 queries.

Hi Experts,
I am running a web-report based on a query created using Query Designer 7.0. I have a default web-template that I have been using for BeX 3.x queries [which has been created using WAD 3.X] and I tried to set the same template as default for the BeX 7.0 in SPRO>SAP Netweaver>Business Intelligence>Settings for Reporting and Analysis>BeX Web>Set Standard Web Templates>Ad Hoc Analysis.
But I can't see the changes being reflected in the web report after I made the change.I still see that the default template 0ANALYSIS_PATTERN is being used. Can we set a web template created using WAD 3.x as the default template for 7.0 Queries?If yes, do I need to do something else apart from the changes I did in SPRO?
Thanks
Arvind
Edited by: Arvind Pattabiraman on Apr 29, 2009 8:51 PM

Arvind,
Have you migrated your template to 7.0 ? you cannot use a 3.x template as the default for a 7.0 template... unless you are using the EP6.0 iView / ABAP stack for running your queries on the web...
Edited by: Arun Varadarajan on Apr 30, 2009 12:29 AM

Error on page from BW 3.5's default web template

Hi Guru's,
We have a problem in our new BWD BW 3.5 environment where we are getting the "error on page" error from SAP-generated code and we arent sure why.
On our old BWT BW 3.0b platform, we have been using a modified version of the 0query_template called Z_QUERY_TEMPLATE. We did a system copy of BWT to BWD, our new BW 3.5 platform. At that point in time we would see our old BW 3.5 default template for queries that we ran. We wanted to see what the new default web template looked like in BW 3.5. We found where we could remove the Z_QUERY_TEMPLATE from the Web Adhoc Analysis web template setting so we could see the new features of the BW 3.5 default BEx query designer template instead of our old BW 3.0b default template.
Now when we run a query through the BW 3.5 query designer on BWD, we are using BW3.5s default template. The prompt web page is fine. No errors on page messages.
However, the initial presentation of the query results displays okay, but shows "error on page" in the message bar at the bottom of the displayed page. As soon as we do any navigation on those query results that error on page goes away. If we navigate back to the initial presentation, all is still okay. If we use the context menu to go back to start, we again get the error on page.
This error on page does not happen in BQ2 (our new BW 3.5 QA environment copied from our old BW 3.0b QA environment where we had not yet changed the default BEx Query Designer template to be Z_QUERY_TEMPLATE). We have tried several queries and in each case, we get errors on page in BWD, but not in BQ2. We used ultraedit to compare the view source output from the equivalent web pages from BWD and BQ2 and the only difference is the validity date of the data. There are no other differences in the javascript code generated by BW in the two platforms.
The statement that Internet Explorer is saying is the problem is the same in each of the cases we have checked and that is:
SAPBWSetFocus(anchor);
Error: Object expected
Code: 0
Its in the set_tab() function.
<script type="text/javascript">

</script>
Because the error goes away as soon as we navigate Im thinking some object isnt being created or initialized, but since the view source code of these pages are identical Im wondering if there is some code that should be executing before this page that is not happening in BWD for some reason.
Any help will be much appreciated.
Thanks,
Jeri

Heike,
Thanks for your help in this. BWD and BQ2 are both on the same SP. SAP_BW release 350 level 10 (SAPKW35010) with BI_CONT at release 352 level 5 (SAPKIBIEP5).
I invalidated the server cache following your instructions and tried again, but am still having the same problem in BWD. The initial display gets the "Done, but with errors on page" message until any navigation is done.
I am using IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158 when I execute queries on both BWD and BQ2.
Please, do you have any other suggestions?
Thanks,
Jeri

Fix table header line of Query in default web template WAD 7.0

Dear all,
I would appreciate if somebody could help me to set parameters to fix the header line of a Web-Item DataProvider (Query) in the default web template 0ANALYSIS_PATTERN for the BEx Web Analyser. I mean I want to see the header line with the characteristics and key figures description even if I scroll down in the query.
My idea was to create a second frame in the template and to fill it with the same DataProvider just with the header of the Query. The problem is that the performance of the query would be badder if we load two Dataprovider/Query instead of one.
Many thanks in advance for your answer and help!!!
Best regards
Abdel

Hi Dion,
Thank you very much for your answer! I have tried to find a paramter in the web application designer to do that, but without success. Now I have included a new container with the same Analysis Web Item, but it does not function! May you have a better idea??
Thank you very much in advance for your help. I'll also post my question in a BI-Forum as you suggested.
Best Regards
Abdel

*May 15 13:18:10.046: %TDP-4-IDENT: cannot set default TDP ident

I am stimulating MPLS In IPV6, Here I am getting some error like this... Please help me on this.
*May 15 13:18:10.046: %TDP-4-IDENT: cannot set default TDP ident
====================================================
R1#show mpls ldp neighbor detail
TDP running; needs TDP Identifier
; no tag-enabled interfaces or directed hellos
please help me to fix...

Hello Sharon,
currently no hope it is not supported up to now. In any case, future developments will be on standard based LDP rather then TDP I recommend you to use LDP if possible in your tests
there are some drafts like
https://tools.ietf.org/html/draft-ietf-mpls-ldp-ipv6-07
but it didn't become an RFC
Hope to help
Giuseppe

Question regarding the default web template for queries

Hello,
I am trying to learn the default web template that is using for queries:
0QUERY_TEMPLATE_BROADCASTING70
I see that it's <bi:QUERY value="" /> is empty which is logic since the query will be inserted on runtime. My question is, where in the web template does it say that? I can't see any parameter it expects to get with the query's technical name not at the webtemplate code nor at the URL...
Roy

Roy,
I think you are mixing things. The template you are mentioning is used for queries that are executed from the query designer. It's not a web template as any other one you create for your users. So, this web template has some parts in it's code that works with the query execution. When you run a query, the system takes the query definition (made in QD) and executes it with the web template indicated for the query. This determination is made by the program that is used to run queries. You can try using RSRT transaction to debug and check how this it's done. If you want to change the default web template used by query designer to run the queries, you should do it copying any standard template, like the one you mentioned. If you don't do it, you won't get the information correct.
Hope this helps.
Regards,
Diego

Cannot set default grid artwork

Hi all,
I right click on an artist and set the default grid to a particular artwork but as soon as I take my mouse away from the artist, the artwork reverts back to the original. So, basically the default is never set.
Some one on this?
Thank you!
EDIT: Cannot set default grid artwork(Thread title changed)
Message was edited by: kt.kthapar

Nope. It is the first image from the first track of the first album that has artwork. As you move your pointer over the icon you will get any other images assoicated with that composer.
tt2

Design Suggestions for Default Web Template

I am starting to develop some web applications for 7.x and do not want to use the default BEx Web Template only because it offers so much functionality that either is too complicated for users, not needed by users, or we don't want them using.
I am wondering how to approach this effort in developing a good default web template. Does it make sense to use a default template since each query can be so different?
Does anyone have any suggestions about what to include, exclude and why? Any details about the template you designed would be greatly appreciated!
Thanks

Hi,
Please refer the following URL:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b26a3b74a4fc31e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/281a3c9c004866e10000000a11402f/frameset.htm
Thanks,
Venkat

Cannot start default web site

I was being a nice husband and moving my wife to a new machine while she is in India on business. I went to join the machine using the connector and the connector install failed. During the troubleshooting of this issue I installed patches and rebooted.
I do not often patch so there were a few. Upon reboot I am unable to start the default website. I get the error This website cannot be started. Another website may be using the same port. I also did a netstat –o to see if anything was running on port 80. Can
anyone assist me?
C:\Users\Administrator>netstat -o
Active Connections
Proto Local Address Foreign Address State PID
TCP 10.0.0.114:389 whs:61103 ESTABLISHED 516
TCP 10.0.0.114:445 10.0.0.88:55375 ESTABLISHED 4
TCP 10.0.0.114:445 10.0.0.118:49169 ESTABLISHED 4
TCP 10.0.0.114:3389 10.0.0.118:54357 ESTABLISHED 3260
TCP 10.0.0.114:6602 10.0.0.88:51644 ESTABLISHED 1696
TCP 10.0.0.114:6602 10.0.0.88:51656 ESTABLISHED 1696
TCP 10.0.0.114:6602 10.0.0.118:49159 ESTABLISHED 1696
TCP 10.0.0.114:6602 10.0.0.118:49163 ESTABLISHED 1696
TCP 10.0.0.114:61103 whs:ldap ESTABLISHED 3268
TCP 127.0.0.1:49175 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49177 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49178 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49179 whs:65532 ESTABLISHED 3060
TCP 127.0.0.1:49191 whs:65532 ESTABLISHED 3204
TCP 127.0.0.1:49193 whs:65532 ESTABLISHED 3204

Hi,
What's your mean of "cannot start default web site"？
If you mean that the client can't access the website, please follow the troubleshooting steps below:
Please try to ping an external IP address. If timeout occurs, this is a connectivity issue. You need to check the IP address, netmask, gateway, DNS.
Please try to run nslookup www.microsoft.com. If this website can't be resolved, this is a DNS issue. Please check the DNS settings and the firewall settings.
If all these tests passed, please try to reset your Internet Explorer.
If you mean that the server can't start the website in IIS, please check if there is any warning or error in the event viewer of the server. Besides, please try to start the IIS manually. If any error pops up, please post it here. It may give some hints.
Best regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Set standard web template

Hello,
We are trying to change the standard web template to a web template we developed in the WAD.
In transaction RSCUSTV27 we put the WAD technical name in the field Ad hoc analysis (=TMPLID_BCAST) but when I run ad-hoc report I'm still getting the standard template (0analysis_pattern)
Please Advice,
Amir

Once you set the default template you need to restart the J2EE Engineen to get the effect.
thanks.
Wond

Error when changing default web-template

Hello experts,
I´m facing the following problem and I don´t know what to do:
I´ve created a new web template in WAD 7.0 and set it as deafult web template for ad-hoc analysis in transaction SPRO.
When I want to execute a query in web e.g. from the Query Designer 7.0 I get an error loading web template (brain 276 / "template not found in master system").
I´ve already checked note 1014795, but it doesn´t help, because I don´t want to start the template with RSRT or iView in Portal. I want to use my template as default template for BEx 7.0.
Any idea??
Thanks a lot in advance.

issue solves: just entered the wrong technical name in spro... :/

Re Organize Free Characters setting in Web Template

Hi All,
I need to re organize free characters order in Web Template.
Can any one please advise where could be the option in Web Application Designer to re organize the order of free chars.
Regards
karuna

As per my knowledge, there is no option to do this..
The free characteristic come in alphabetical order in ascending order.
If you want you will have to add a suffix like 1, 2 to bring it in desired order...

Can you have multiple dataproviders in a default web template?

I was working on some changes in our BW web applications to 'shut down' certain reports if we determined there was a particular data issue (e.g. maybe aggregates not available for a large cube, as an example). I have already accomplished this in our 'cockpits' by adding a hidden dropdown box that is fed from a query against a master data InfoObject -- basically a way of flagging whether a particular area should be 'down' or not. This has worked well for us.
My next goal was to extend this a little further and actually set up a way to designate that a particular cube should not be available. Then when someone kicks off a web report (could be off a menu or even a bookmarked report..), I would again make template changes to check to see if the cube used in the report is flagged. If so, then redirect the user to a message page instead of executing the query. This would help us during critical times to keep users out of a problem area.
Again, I can make this work well in many custom template situations we have. The problem I am now encountering is with the standard template itself (Note: I am referring to our copy of 0QUERY_TEMPLATE that is designated as the default).
I have added a second dataprovider to this std template that points to my query against the InfoObject data. This dataprovider is linked to the dropdown box that is hidden. The standard template already has dataprovider DP that is not qualified with a query name. If you execute a query from BEx and launch it to the web, it builds a URL and passes in QUERY=xxxxxxx and INFOCUBE=yyyyyy. Now because there are 2 dataproviders, this is essentially overlaying not only the DP info, but also my new 2nd dataprovider. So the added dropdown pointing to a particular characteristic in the query is no longer valid (it thinks it should be using the QUERY value now).
In cases where I can first control the URL that a user executes, I would do SET_DATA_PROVIDER_1, 2, etc... and pass in INFOCUBE_1, 2.., QUERY_1, 2,... -- this is not a problem. But how can I make the standard query-to-web functionality still work once a 2nd dataprovider has been added to a default template? I would appreciate any thoughts on this.
Thanks, Jody

Thanks Heike... I was hoping that there might be some way I couldn't think of & still only use 1 template here. But as you suggested, I can put the CHANGE_TEMPLATE command in our existing 0QUERY_TEMPLATE copy and then make a new copy for it to branch to -- making sure that my new dataprovider gets filled in with its appropriate query/cube. This at least minimizes impact by not having to change everything we have that references our 0QUERY_TEMPLATE copy through menus, JavaScript, favorites, etc.
I am familiar with the 'flicker' effect when we have used the CHANGE_TEMPLATE in the past (bringing up 'Info' for a query in a new window while maintaining the state of the report in the existing window). In this case, since the report is being created in a new window, it really isn't noticeable at all unless you watch the browser status or the URL command. Thanks for the information...
Jody

Cannot set default web template

Similar Messages

Maybe you are looking for