Cannot set margins to 0 on Canon Pro9000

i cannot set the print margins in lightroom 2.3 to 0. I'm not sure why this is the case. the problem just started. i could do it earlier today. as near as i can tell this occurs at all print sizes - 4x6, 5x7.... i reinstalled the driver for my canon printer (Canon Pixma Pro9000), but the problem persists. i can print borderless in photoshop cs3 and the printer seems to be working fine in other applications like Word and IE.
for example, if i select a 4x6 paper size (4" x 6" 10x15 cm), then the print margins appear to be stuck at the following settings
left: 0.14
right: 0.12
top: 0.11
bottom: 0.21
the max cell size allowed is the following:
height: 5.68
width: 3.50
i cannot set the margins any lower than the above values without triggering an error message that says i am out of range below 0.14, etc. i cannot change the cell size to 6 x 4 without triggering a dialogue box that says i can't do that.
i have no idea why this is occurring and don't seem to be able to fix the problem. i need to be able to print borderless pictures. it doesn't matter whether i select borderless from within the Page Setup. no matter what i try to do, i cannot print borderless any more.
please help!

I doubt there is a sync issue between LR and the printer driver. Pretty sure the LR team is aware of this printer model and working to assure its usefulness.
After selecting the Borderless Printing checkbox in the printer driver, there were some settings revealed to control the "over spray." Have you tried working with these settings to coordinate with LR? I haven't done any borderless printing, I'm just good at getting these things to work together and usually it is a configuration issue over a compatibility or sync issue.
A feature of the Print Templates in LR is that they hold driver settings as well as LR settings. I've worked with folks who thought that you set up your driver and then select a template... this doesn't work because the template will set the driver to its settings - probably the ones that are incorrect. This is why my last direction was to update or create a new template after changing the driver.

Similar Messages

Problems printing with PSE12 and Canon Pro9000 MII

There seems to be a problem with PSE 12 and the print function. Using my Canon Pro9000-Mark II the size is off. Set to 8 x 10 photo paper in either landscape or portrait, PSE will print it to what looks like a 16 by 20 print, even though all setting are for an 8 x 10. Another problem is that even though the 9000 is set as my default printer, PSE always returns to my Epson 1400.
To further complicate this matter, if I use the Automation tool and select Canon Print Studio Pro, the 9000 prints perfectly with PSE12.
Can anyone offer any suggestions?.

Usually posted problems with the Pro9000 are poor colour matching ones, I don't recall a sizing problem before.
Have you checked all the places where size may be set, both in the PSE Print Dialogs (check paper size and print size, and under more options 'custom print size) and in the standard printer driver ?
Out of interest why would you NOT want to use Canon Print Studio Pro plug-in ? I thought this was Canon's recommended printing work flow.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Photoshop CS - Canon Pro9000 ICC issue

I'm using Photoshop CS with Apple OS 10.6.2 on a 24' iMac. I am trying to print to a Canon pro9000 Mark II.
I have the latest Canon driver, 10.30.3.0, and the latest ICC profile set for Canon from the Apple driver site. As I begin the print dialogue everything seems fine. Photoshop is controlling color management, and I select the Canon paper/quality ICC profile. After I click print, it sends the print job and I get the following error: "Could not print "test.jpg" because the ICC profile is no longer installed."
The Photoshop issue has been consistent. I used the standard drivers and profiles that came on the Canon disk; then I ran Software Update for the driver; then I downloaded the complete 10.30.3.0 ICC set from Apple. Each time I get this same error message. It occurs immediately AFTER Photoshop says the file is sent to the printer.
It doesn't appear to be the printer alone, since I can successfully print from Photoshop Elements, Apple Preview, and using the Canon "Easy Print Pro" plugins within Photoshop. I can even print through Photoshop Print Preview, but I can't control color there.
Any ideas around what happens to the ICC files in the standard Photoshop CS print dialogue?
Thanks.

I gave that Canon rep the exact same rebuttal - also quoted from information that you had talked about last weekend and in lock step he simply embraced the Canon company line over and over. I asked if they had printed with Photoshop, to see where their code is generating an error and the illogic notion that a missing profile would be the responsibility of Adobe. He wouldn't even entertain the concept; walked me through a plug and play feature of my Pixma printer to show that it is printing just fine - never mind that my picture came out looking like a washed out, colorless of image that had none of the characteristics of the picture in my monitor generated in Elements 9.
I asked him 'didn't printer drivers come from the manufacturers themselves?' "Nope, they all come from Adobe."
So just complete and total BS. Nowhere to turn now. Without those ICC printer profiles, color management is just an esoteric concept that exists in the minds of Canon CSA reps.
Canons' 1 million pixel capability might as well be 1 trillion for all the good it does.
Judging from the threads out there, I'd bet that Canon has boatloads of other complaints re this profile issue.

Washed out colors with Canon Pro9000 using ICC profiles

I recently bought a brand new Canon Pro9000 printer and have a problem getting acceptable results when using the supplied ICC profiles.
I believe I am doing everything by the book. First I select the correct ICC profile for the printer and the paper I am using in the Aperture print dialog, then I go into Print Setting and set the paper type in the Quality and Media section, as well as matching the print quality to the ICC profile.
The Canon driver I use (10.1.0.0) does not provide the option of explicitly turning off color management in the printer. If a choose a profile from the Aperture printing dialog and then go into "Printer Setting > Color Options" the Color Mode drop down menu is grayed out. After searching trough various discussion forums I can see that some people claim that color management is automatically turned off when selecting a profile, but I have not been able to get a confirmation on this.
The resulting print is quite disappointing, it is very bright and with washed out colors. I have tried quite a few different papers, including semi gloss and photo rag - all original Canon papers (of course using the matching profiles).
Using the default "System Managed" option on the Color Sync drop down menu produces great looking prints that very closely matches what I see on my display. My only take on them is that they are very slightly over saturated.
When I enable on screen proofing with the matching profile, I can see that the picture gets slightly brighter, but way less that what I get on the prints.
I have calibrated my display according to the suggestions from Bagelturf (http://www.bagelturf.com/files/694c5a88c7241f8f04c7cff33cde8e3e-560.php), which is in line with Apple´s recommendations in the Aperture documentation.
I have read trough discussion on similar problems, both here ("more color nasties" and "Printing problem since upgrading to Aperture 2") and at dpreview, but I have not been able to figure out this problem yet.
System configuration:
- MacBook Pro 2.4GHz
- Leopard 10.5.2
- Aperture 2.1
- Panasonic DMC-L1 camera (shooting RAW)
- Canon Pro9000
- Canon driver 10.1.0.0 (CUPS)
Any suggestions?
Regards,
Thomas
Sorry for posting this under the "Book" forum - mistake from my side
Message was edited by: tembla

Hi Thomas,
With my iP8500 I leave it on, so it appears to be specifically the behavior of the Pro9000. I did a little more testing last night as I recently re-calibrated my system, and have another method you can try. Instead of turning off "Black Point Compensation" which can leave photos with lots of shadow detail a bit too dark, open up the "Printer Settings" window and go to the color management options. The only thing you can change here is the brightness setting. Change it from Normal to Dark, leaving BPC turned on. I think you'll be pleased with the results. Good luck!

Lightroom Printer Template for Canon Pro9000

I have been trying to set up a printer template for my Canon Pro9000 that has as one of the printer settings that color management is turned off. I create a new template and/or I try to update settings on an existing template. No matter what I do, it seems like if the setting reverts to ICM. Also, it seems like it ignores the setting that I check for whether or not I want a print preview.
Are these just settings that can't be saved in a template, or am I doing something wrong?

I have a p9000 too. I am not aware that LR can set up a template with all the printer driver settings you want including turning off color management in the printer.
I always thought that every time you load light room, you have to reset all your printer driver settings in the printer driver (as well as specifying no your paper profiles and rendering intent in LR.
This ain't exactly great. I usually print in qimage which defaults to your previous settings for any given type of paper profile you choose.
But LR isn't there yet.

Canon pro9000 to Airport Extreme BS - confusing?

we are running a network on the older (802.11g) extreme base station. there is a canon pro9000 connected via usb to the base station. we have a 20" imac that can print to it just fine wirelessly as well as a macbook pro (core due, not core 2 duo) that can. however, for the life of me... we have a second macbook pro intel core duo that cannot print to it. in fact, it seems like trying makes the printer have some strange behavior. having said that, i can't find anything different about the setup on the goofy mbp from the other machines. i've reset the printer system. any thoughts?

i actually was able to solve this one myself.
what i did was go into user>library>preferences and delete everything that had the word "print" in it. i also went into HD>library>preferences and did the same thing. then i reset printing system in the printer setup utility, restarted the goofy computer, repaired disk permissions, and then added the canon pro9000 to using the system prefs. that worked just fine.
not sure why i had to do all of that. it seems like just resetting the printer system should have handled all of that for me. regardless, i got it fixed, and we're happy!

I cannot set up page set prior to printing. From file to Page set then it comes up full depth..running off the bottom. I cannot print from the web

Question
I cannot set up page set prior to printing.
I go from File to Page set which comes up very narrow and tabs Format& Options and Margins Headers/Footers.
These are full depth..running off the bottom. I cannot set footers. I cannot print from the web
When I go to Print Preview I get a totally gray screen

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the Paragraph Designer.

In FrameMaker 9.0.3 and 9.0.4, I cannot set tab stops for a style in the paragraph designer. Here are the steps to dysfunction:
1. In Paragraph Designer, for Tab Stops, click Edit. Edit Tab Stop dialog box opens, and the Paragraph Designer dialog box closes.
2. Type value in New Position box.
3. Click Continue. The Edit Tab Stop box closes.
4. Open Paragraph Designer. No tabs are recorded.
Discussion of a similar problem occured on this forum in June 2010. At that time, the resolution seemed to be to upgrade to 9.0.3. Has anyone else encountered this problem with these versions?
Thanks.

Hi, Arnis,
Brilliant! Thanks so much. I only looked at the later discussions of that thread, which seemed to indicate the problem would be solved by an upgrade to 9.0.3.
-Trish

When I click the iCloud button I get a browser with check boxes, not slider buttons and it does not have a "backup and storage" button. So I cannot set up backup.

When I open my iCloud browser it looks different than "normal." It shows the list with check boxes, not slider on-off buttons. It dos not show a "storage and backup" button so I cannot set up my backup. What is wrong?

If see something like the image below it's because you are looking at the iCloud settings on your Mac, not on an iOS device (which has sliders). Storage & Backup isn't in the Mac settings because you cannot back up your Mac to iCloud. Only iOS devices can back up to iCloud. On a Mac, you can get information about your iCloud account storage by looking at the green usage bar at the bottom and by clicking the "Manage..." button on the bottom right.

When I try to create a calendar announcement in my iCloud calendar thru my PC / Outlook, it says 'the set of folders could not be opened. The information store could not be opened'. Can anyone help? This means I cannot set any calendar events thru my PC.

When I try to create an iCloud calendar announcement / event on my PC thru Outlook, I get the message 'the set of folders could not be opened. The information store could not be opened'.
I cannot set any calendar events for my shared calendar. Can ayone help?

If you upgraded to Windows 8 you may need to update the iCloud control panel for Windows to version 2.1 (see http://support.apple.com/kb/TS4463).

How do I set margins in Numbers, where did page set up go?

Since I have upgraded to Mavrick, everything has changed in Pages and Numbers, the main reason I left Microsoft was because of the constantly changing software with each update. The Inspector is gone and in Numbers the left hand column listing all my tables has disappeared/changed to a row which I have to continuously scroll through. Arrrrgh! Is there any way to get that back? Also . . . Can anyone tell me where I can find the Page set up or set margins in Numbers?

Hi 'cat,
It appears te main push behind the latest 'upgrade'to the iWork applications was to provide compatibility/similarity between the iOS versions and the Mac versions. A lot of features were lost in the change, some of which have made theri way back into Numbers 3, etc., others that are scheduled to be brought back, and still others for which there's been no indication.
Inspector functions are now handled via the formatting button (paint brush), as well as the button bar that appears when a cell is selected.
With the greater focus on iOS, features pertaining to printing to paper have been largely forgotten. There's no way I'm aware of to set document margins in Numbers 3.
The features you mention are still available in Numbers 2.3, which will, if you had it installed earlier, still be on your Mac. You'll find it in a folder named iWork '09, located in the Applications folder.
Any document you've opened in and saved from Numbers 3 will need to be re-opened in N3 and Exported as a Numbers '09 document before it can be opened in Numbers '09, and may be missing some features not supported in Numbers 3.
While its probably not a long-term solution, returnng to Numbers '09 may provide an interim fix while waiting for N3 to get the updates you need.
Meantime, add your voice to the rest requesting the reinstatement of any features you consider essential. Use the Provide Numbers Feedback item in the Numbers menu to make your request.
Regards,
Barry

Cannot set Windows 7 default printer in Boot Camp

I discovered today that I cannot set a default printer in Windows 7. I right click, and try to make one of the printers default but there is no check mark. One of the programs that I use says I do not have a printer installed.
I can print to my printers using Word by selecting the printer that I want but cannot select a default in control panel.
If I access Windows programs using a VM Fusion, the program that says there is no printer installed in boot camp, does not give be this message and I can select a printer. BTW, I have never been able to select a "default printer" using VM Fusion.
The only thing unusual is I had to reactivate Windows for no apparent reason last week and I cannot select all of the Themes available in the personalize menu.
It is difficult to pinpoint when the printer issue started because I mainly access my Windows programs through VM Fusion. I am guessing the changes happened when I had to reactivate Windows
I am away from my iMac currently and was wondering if anyone has experienced this and/or have a suggestion.?
Thanks,
Roy

Update.
Apparently this is a Windows Registry issue. Looks as if there is a VM Fusion driver set as default (thinprint??) I cannot delete or modify this registry key. A new profile solves this issue and I will have to copy everything over to the new profile, if I cannot get this registry key issue solved. I will post on a Microsoft board to see if there is a solution.
Roy

Cannot set status of Urgent Change after manual transport

Hi all,
We are usng CHARM in Solution Manager 7.1 for import to the SAP ECC (EHP6) systems.
I cannot set the status of the Urgent Change document (ZMHF) to status "To be Tested" after the transports were manually released and manually imported to the ECC QA system.
When I use action "Pass Urgent Change to Test", the system stopped with error "Not all task are yet released" and will not change the status .
Based, on the Task List log, the system started the release process although no transports were released.
Is there any way that I can update the status of the Urgent Change document to "To be Tested"?
I tried program CRM_SOCM_SERVICE_REPORT but still did not change the status.
Any suggestion?
Thanks,
Tess

Hi Venu,
have a look under System Administration - System Configuration -- Knowledge Management -- Configuration --Content Management -- User Interface -- Commands -- UI Command Groups -- StatemanagementGroup.
See Java class: com.sapportals.wcm.rendering.uicommand.cm.UIStatemanagementGroupCommand. Take the class and decompile this and everything needed around to understand how this class works.
Then you can choose to extend this CommandGroup to also have a command "Resubmit for Approval" or you can implement your own UI Command only for resubmitting (you will also have to activate your command (group) by settings within the configuration).
On the other hand, if all this is completely new to you, I'm a bit sceptical if the task isn't a bit too big as a first task on KM implementation topics...?
Hope it helps
Detlev

[Solved?] VLC won't play audio -- cannot set buffer duration

I can't play sound in VLC. I have tried the default and the ALSA outputs. I know ALSA works, because mpg123, speaker-test, and rdesktop's sound all work. (Saying that, I can't tell if mpg123 uses alsa or not - rdesktop does though)
Attempting to play something in VLC gives me some rather cryptic errors. What follows is the output of "vlc -v" and an attempt to play a video with sound. I have split the "code"-tag just before the actual error output for clarity and ease of scanning.
VLC media player 2.0.7 Twoflower (revision 2.0.6-54-g7dd7e4d)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/audio_output/libportaudio_plugin.so' (libportaudio.so.2: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/audio_output/libjack_plugin.so' (libjack.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/services_discovery/libmtp_plugin.so' (libmtp.so.9: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/notify/libxosd_plugin.so' (libxosd.so.2: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/visualization/libgoom_plugin.so' (libgoom2.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/visualization/libprojectm_plugin.so' (libprojectM.so.2: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/codec/libtwolame_plugin.so' (libtwolame.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libvcdx_plugin.so' (libvcdinfo.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libaccess_jack_plugin.so' (libjack.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libaccess_dv_plugin.so' (libavc1394.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/access/libaccess_mtp_plugin.so' (libmtp.so.9: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/video_output/libaa_plugin.so' (libaa.so.1: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/video_output/libcaca_plugin.so' (libcaca.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc warning: cannot load module `/usr/lib/vlc/plugins/control/liblirc_plugin.so' (liblirc_client.so.0: cannot open shared object file: No such file or directory)
[0x8eb108] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
[0x7f1e6cc01bf8] mkv demux warning: MKV/Ebml Parser: m_el[mi_level] == NULL
[0x7f1e6cc01bf8] mkv demux warning: MKV/Ebml Parser: Up cannot escape itself
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7f1e68c068a8] alsa audio output error: cannot set buffer duration: Invalid argument
[0x7f1e68c068a8] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x7f1e68c068a8] oss audio output error: cannot open audio device (/dev/dsp)
[0x7f1e68c068a8] main audio output error: no suitable audio output module
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7f1e6cc02b68] main decoder error: failed to create audio output
I have reproduced this with the same result using 'sudo vlc-wrapper' and I am added to the 'audio' group.
I have no idea where to start with this issue, I've tried googling but it seems that only one person has ever had this issue before (if Google is to be considered a reputable source), and he was running his own VLC build. I am running the build "pacman -S vlc" gave me. If anyone could point me in the right direction on this issue I'd be grateful.
Edit: This is my /etc/asound.conf. I have no idea what any of this means, at this point it's fill-in-the-blanks wiki copypasta (Edit2: The purpose of this file is to try to stop alsa from sending all my sound through a disconnected HDMI instead of the speakers)
# Use PulseAudio by default
#pcm.!default {
# type pulse
# fallback "sysdefault"
# hint {
# show on
# description "Default ALSA Output (currently PulseAudio Sound Server)"
#ctl.!default {
# type pulse
# fallback "sysdefault"
pcm.!default {
type plug
slave.pcm {
@func getenv
vars [ ALSAPCM ]
default "hw:Generic_1"
# vim:set ft=alsaconf:
Last edited by Score_Under (2013-08-02 23:23:27)

Situation update:
1. I didn't need my asound.conf like that -- I should have used pulseaudio in the first place, I was unaware that ALSA does not allow more than one program to use the sound device at the same time, whereas pulseaudio is used to mix sounds.
2. VLC works fine on PulseAudio. No idea why it failed on ALSA!
Last edited by Score_Under (2013-08-02 23:22:45)

Need help on ORA-02074: cannot SET NLS in a distributed transaction

Hi All,
I am Writing a plsql Code like this
DECLARE
op_job_id NUMBER;
op_object_version_number NUMBER;
x_job_definition_id NUMBER;
op_name VARCHAR2(1000);
L_VERIFY_FLAG VARCHAR2(1);
l_error_message VARCHAR2(2000);
BG_ID NUMBER;
lv_job_group_id APPS.per_job_groups.job_group_id@SYSTEM_LINK_VISMA%TYPE;
CURSOR C1 IS SELECT * FROM EBS_PER_JOBS_STG;
BEGIN
FOR H1 IN C1
LOOP
BEGIN
IF H1.BUSINESS_GROUP_NAME IS NOT NULL THEN
SELECT BUSINESS_GROUP_ID,job_group_id INTO BG_ID,lv_job_group_id
FROM APPS.PER_JOB_GROUPS@SYSTEM_LINK_VISMA
WHERE DISPLAYED_NAME=H1.JOB_GROUP_NAME;
END IF;
EXCEPTION
WHEN OTHERS THEN
L_VERIFY_FLAG := 'E';
l_error_message := 'Entered Job Group Name is Wrong';
END;
-->> JOB GROUP ID <<--
APPS.hr_job_api.CREATE_JOB@SYSTEM_LINK_VISMA
(p_business_group_id => BG_ID
,p_date_from => H1.DATE_FROM
,p_approval_authority => H1.APPROVAL_AUTHORITY
,p_emp_rights_flag => H1.EMP_RIGHTS_FLAG
,p_benchmark_job_flag => H1.BENCHMARK_JOB_FLAG
,p_job_group_id => lv_job_group_id
,p_job_information1 => H1.JOB_INFORMATION1
,p_job_information2 => H1.JOB_INFORMATION2
,p_job_information3 => H1.JOB_INFORMATION3
,p_job_information4 => H1.JOB_INFORMATION4
,p_job_information5 => H1.JOB_INFORMATION5
,p_job_information6 => H1.JOB_INFORMATION6
,p_job_information7 => H1.JOB_INFORMATION7
,p_segment3 => H1.JOB_CODE --JOB_CODE
,p_segment6 => H1.JOB_NAME --JOB_NAME
,p_job_id => op_job_id
,p_object_version_number => op_object_version_number
,p_job_definition_id => x_job_definition_id
,p_name => op_name);
dbms_output.PUT_LINE('OUTPUT JOB NAME CREATED : '||op_name);
END LOOP;
EXCEPTION
WHEN OTHERS THEN
dbms_output.PUT_LINE('Error Message Is: '||SQLERRM);
END;
i am running it in Another database Using database link connecting to Apps.
when i am running it am getting the following Error:
Error Message Is: ORA-02074: cannot SET NLS in a distributed transaction
ORA-06512: at "APPS.HR_KFLEX_UTILITY", line 2423
ORA-06512: at "APPS.HR_KFLEX_UTILITY", line 2380
ORA-06512: at "APPS.PER_JBT_UPD", line 468
ORA-02074: cannot SET NLS in a distributed transaction
ORA-06512: at "APPS.HR_JOB_API", line 878
Please help me on this, this is quite urgent to me.
thanks
sri

Please see these docs.
ORA-02074: Cannot SET NLS in a Distributed Transaction [ID 556391.1]
Portal Used To Call PO_CHANGE_API1_S: ORA-20001: ORA-02074: Cannot SET NLS In A Distributed Transaction [ID 561246.1]Why are Concurrent Programs Calling FND_GLOBAL.APPS_INITIALIZE Using DBLinks Failing? [ID 466800.1]
ORA-02074 when Executing set_nls over a DB Link [ID 132679.1]
Thanks,
Hussein

Cannot set margins to 0 on Canon Pro9000

Similar Messages

Maybe you are looking for