Cannot setting the BB to use the provider's 3G 2100 AIS thailand.

I setting the apn to Enable and apn = internet but can not use it.
Please reply mail to <removed>
MOD EDIT: Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

Hi and Welcome to the Community!
Please expand on your description...from "but can not use it", there's no way to understand what is happening. Please provide exact steps you attempt, along with the exact result of each step, and the exact and complete content of any error messages presented.
Thanks and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Firefox Sync: I cannot log into my account using the sync key that was given to me and nothing I do seems to fix it. Is there anyway I can "reset" my username? I'd like to reopen an account using my same username as opposed to starting from scratch.

I cannot log into my account using the sync key that was given to me and nothing I do seems to fix it. Is there anyway I can "reset" my username? I'd like to reopen an account using my same username as opposed to starting from scratch.

reading through that, it doesn't look like you were given up on Candice. you never replied to StarDeb's last set of questions in that thread. she was probably waiting to hear back from you.
why didn't you reply?

Setting camera target and using the pan tool moves everything except target

Hi,
I have a JavaScript which sets the camera target using the code below.
var setTarget = function(strNodeName) {
    for (var intCounter = 0; intCounter !== scene.nodes.count; intCounter++) {
        var node = scene.nodes.getByIndex(intCounter);
        if (node.name.indexOf(strNodeName) === 0) {
            var camera = scene.cameras.getByIndex(0);
            camera.target = node;
This works great for the rotate and spin tool. But hen I use the pan tool, everything moves except the node that was set as target.
Why is this happening and how can I prevent this?

James, thank you very much for the VI, now i understand what you meant by initialising the shift registers. You're right about my text-based programming background, and seeing how you've implemented the case selection really helped. The removal of the mathscript modules does reduce lag quite a lot, too, and now everytihng works exactly as it should. I set the initial servo positions and rawx/rawy values, extended the error line the way you suggested, and added a division by two after the array summation, in order to get an average, rather than a near-double result.
I agree with you and 22v10 that slicing the image up into quadrants might have been a better idea to begin with. The 'center band' that is set in the current vi works quite well and i'll stick with it for now, since i won't have much more time to work on this project.
I avoided adding tilt for now because i thought it would only complicate things. Now that panning works, i've duplicated the method and adjusted it for tilt.
I'm also considering removing the Vision Assistant nodes, since for calibration purposes i need to go into it and create new templates from scratch every time, and this will only get more tedious as i start experimenting with more complex 'targets'. A more viable solution is presented here, where everything is set once the application is launched.
Please find attached an updated copy of the VI. It's a bit laggy, i'll continue working on it and updating.
James, thank you again for providing a working solution. I'd love to give you credit when the project's finished.
Attachments:
image tracking camera centering-update 2, working.vi ‏916 KB

I can hear the caller, but they cannot hear me when I use the speaker function on my iPhone4. Are there any fixes?

I can hear the caller, but they cannot hear me when I use the speaker function on my iPhone4. Are there any fixes?

Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device. Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

I cannot send emails with pics using the stock email app on my new Droid Turbo, it holds them in the Outbox and won't send even if I move to Inbox and resend

I cannot send emails with pics using the stock email app on my new Droid Turbo, it holds them in the Outbox and won't send even if I move to Inbox and resend

First check to make sure you have data turned on and not just Wi-Fi. From reading your question you seem to be saying e mail is working just not attached photos. What size are the photos as some HD photos can't be sent. Your camera may be set at a very high picture size and you can go to settings and lower the size and that may solve your mailing problem.

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks

>SystemPreferences>Network>DNS

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?

My ipod touch 4g will not restore, there's no problems with my pc as i recently set up an ipad the following day using the same procedure

Hi, can someone please help? My sons new ipod touch 4g is not responding to any attempts at restore, and is not recognized in itunes or my computer. My laptop is working ok as it originally set up the ipod but when i connected it again it told me there was an update available, that's when it all went pear shaped. Just two days later we purchased an ipad which we had no problem with syncing on the same laptop using the same usb port. I can't even charge the ipod as the screen does not change from the 'connect to itunes' symbols. I've also tried charging it on a docking station, to no avail. I've done everything that's been suggested in the forums so if anyone knows anything, please let me know!

Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Above is from:
iTunes: Specific update-and-restore error messages and advanced troubleshooting

I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup

I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup in itunes or on my computer

Did you fail to import them to your computer before restoring?
Not good.
They are likely gone.
You can try restoring from backup.

I had set my phone to use the pattern screen lock but now it is asking for a PIN.

I had set my phone to use the pattern screen lock but now it is asking for a PIN.
I turned my phone on this morning and instead of the pattern lock that I've been using with this phone since I purchased it, it is now asking for a PIN that I do not know.
I contacted Samsung but they told me that my carrier would be able to reset the PIN for me remotely. I've been trying to find a way to chat with Verizon support but it keeps sending me to self help troubleshooting. It was so easy to get a live person on Samsung support, how do I get a real person on Verizon?
Thanks

Thanks deb2too, I'll keep the number for future reference. I was able to unlock the phone via https://www.google.com/android/devicemanager

I just purchased an extreme. I have an express. The sales guy recommended setting up a hot spot with the express and use the extreme as a base station. What does he mean and how do I do this? What are the advantages?

I just purchased an extreme. I have an express. The sales guy recommended setting up a hot spot with the express and use the extreme as a base station. What does he mean and how do I do this? What are the advantages? How do I set this up?????

I think he means to set up the main extreme as the main router or "main base station", and then use the express to "extend" the network.
You can look up the manual for your express here for more details:
http://support.apple.com/manuals/
Extend the range of your network by adding AirPort Express to your existing AirPortExtreme or AirPort Express wireless network (this is called a Wireless DistributionSystem, or WDS). "
Extending the Range of an Existing AirPort Extreme or
AirPort Express Network
You can extend the range of an existing AirPort Extreme or AirPort Express wirelessnetwork by setting it up in a WDS. Wireless computers can connect to the network andshare the Internet connection, share files, and play network games. If you connect yourAirPort Express to your home stereo, computers on your wireless network can useAirTunes to play music on the stereo from iTunes. If you connect a USB printer to yourAirPort Express, all of the computers on the network can print to it.
n Open the AirPort Setup Assistant on a Macintosh, or the AirPort Express Assistant on acomputer using Windows XP. Follow the onscreen instructions to extend the range ofyour AirPort Extreme or AirPort Express network.
Note: Extending the range of a network using WDS may reduce overall networkperformance.

When I load certain websites the the writing is all squashed up. I correct this by changing the character encoding setting. I am using the latest Apple Mac machine. Thanks in advance

When I load certain websites the the writing is all squashed up. I correct this by changing the character encoding setting. I am using the latest Apple Mac machine. Thanks in advance

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Cannot Test this Web Service using the Test Page

Hello,
I'm using
- JDeveloper 11.1.1.3.0
- SOA Suite 11.1.1.3.0
- Weblogic Server 10.3.3
- Windows XP SP3 (german version)
Now I'm having a BPEL-Process (SOA) Project created in JDeveloper and deployment to the server works fine, i.e. the service can be seen in enterprise manager.
But if I want to test the service using the webservice tester it get the following error if I copy the URL for getting the WSDL file to another browser tab:
Cannot Test this Web Service using the Test Page
Endpoint Name : FabricProvider (Service Description)
You can test the Web Service using a Java client.
Failed to Load a composite for composite identified by default/ReisebuchungService!1.0*soa_6aebb5fb-7830-497b-b853-839518d112f0
Please verify that the composite has been deployed.
Can you help me with this issue? I have no idea where to start debugging or resolving the problem.
Thanks in advance

Heya
others and I face the same issue, reported here:
TP4: Cannot Test this Web Service ...
Oracle is not too responsive on the issue though.... :(
Cheers Christian.

I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

?? I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

Thanks, David. i thought i had it set correctly in Preferences in L&R. Being i was wearing my suspenders and belt at the same time i went back to L&R, cleared what was there and re-entered same to include unchecking and rechecking Time Format fgor 24-hour time. It works now. Thanks again.

Ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, but the slide feature and touch feature is non existent

ok my iphone 3g touch screen is not responding, i can recieve calls and it can charge and connect to itunes, but i cannot go any further than using the home button or the power button, it is only the slide feature and touch feature that has become non existent. Also, i have a f'ew cracks in my screen for a while now and it was running smoothly up until saturday when i sat on it applying large amounts of pressure to the phone screen. Is there a way i can fix this myself without having to recover my phone to factory settings or wasting 50 bucks to get it fixed??

Hi Dire Dawa,
If the screen on your iPhone isn't responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

Cannot setting the BB to use the provider's 3G 2100 AIS ​​thailand.

Similar Messages

Maybe you are looking for

Cannot setting the BB to use the provider's 3G 2100 AIS thailand.