Cannot setup time capsule - Help!

Hoping someone can help me.
We had time capsule setup and the backups were working great since February.   One day, we started to get constant errors that backup could not take place.  Not sure, but we think it occurred after we had a power failure and the same day we did a security update.
We did something and it worked again, but then it totally stopped working.  After going on the boards and reading other posts, we deleted the data on the time capsule and reconfigured it.  Suddenly, we could no longer get air port utility to find the time capsule.
No matter what we do, we cannot get airport utility to find it.  Any suggestions? 

You might find useful advice on this Web page: Time Machine Troubleshooting.

Similar Messages

  • Cannot setup Time Capsule

    I have a Comcast gateway cable/router. I am unable to setup Time Capsule, after dozens of resets, hours with both Comcast and Apple support, and two visits from Comcast field techs. I took the TC into the nearest Apple store for service. The device was still under warranty. The "genius" confirmed a defective TC, so I got a new one. Brought it home, tried to set it up following the directions, and still no luck.
    I am able to set up using an Airport Express but not TC. Is it possible that the replacement is also a lemon?
    Fortunately, I have established a wifi network using the Comcast gateway. But it uses only the 2.4GHz channel, which dramatically reduces download speeds as compared to 5GHz channel.
    I am certainly open to suggestions and advi

    The TC should be in bridge mode.. plugged into the comcast router. Do the setup before you plug it in... if it fails, use ethernet directly to the TC and give us a few screen shots of the summary page.
    I would also use 5.6 utility.. frankly I think you can get in a knot if you use 6.1 because it auto sets things it shouldn't.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0

  • I cannot setup time capsule for first time

    Hi!
    I have a brand new macbook pro and time capsule 2tb 4th gen. I have been trying to set up the TC for some days now but it just won't work. Maybe it is because I live in China and I bought them in Canada (does not make sence but ok) but I keep on getting the message "your apple wi-fi base station does not a valid ip address"
    I have an existing wifi connection so what I do is connect the modem to my TC (the cable that normally goes from modem to router -a chinese router provided by isp with an ip address on it and some admin things), then I open airport utility and follow the steps. I obviously do not get very far.. Does anyone know what I am doing wrong? I tried hard reset, power turn-off for 24h and all youtube videos out there and I have yet to see the (green) light!
    Your help is very much appreciated!!
    Chris

    Download and install the real utiity.. v6 is a drainer.
    http://support.apple.com/kb/DL1482
    Since the modem you already have is likely a router.. setup the TC in bridge.
    Go to 5.6 airport utility, manual setup, internet tab.
    Connection sharing.. off, bridge mode.
    update the TC and plug the modem into wan (but any port is fine in bridge). WAN port has the circle symbol and slightly spaced from the others.. nearest the usb and power end.
    Now setup wireless.. either turn it off and keep using wireless in existing router.. if available.
    Or setup wireless name and setup as per your requirement.. but note.. TC are regionalised.. those sold in North America do not offer China as a region. You need specific ones for that region. So be careful that you do not use wireless in the wrong channel or power settings as I doubt the Chinese authorities will take kindly to you.

  • Cannot see Time Capsule for backup but internet perfect A

    I've seen other posts about time capsule problems and most talk about wireless dropout and loss of internet connectivity. My situation is almost the reverse:
    Full airport strength in menu bar. Full access to internet sites on at least one computer. Cannot see Time Capsule via Airport Utility or in Finder on any computer. Time Machine backups fail (marked as Delayed in menu bar item).
    If I reboot (via unplugging) the Time Capsule, it shows up again in Airport Utility and backups are successful. This has happened three times now. I think the first time was prior to upgrading the firmware. The second two times were after the Time Capsule firmware upgrade. In the second two instances, it looks like the backups run for about 12-13 hours, every hour. No problems. Then, they drop out. Yesterday, it ran from 8:30 AM until 9 PM.
    I've got two Macs (a Powerbook G4 and a MacBook Pro), each running latest software updates (security, 10.5.2, etc.).
    Unplugging (rebooting) my Time Capsule each day is not an option. That's partly why I moved from an ancient LinkSys router that always needed to be rebooted since we lost local and internet access. Any help is much appreciated!
    Cheers,
    Drew

    Have you set up the TC with user accounts??
    Most people just use the TC password..
    I have done very little with user accounts on the TC.. it seems fundamentally wrong headed to me.. If you have a domain controller with everyone using accounts to login that is fine.. and the TC would then exist in connection to the domain controller.. but it is a home device and there is no function to all that.
    What will happen if you change over to standard security or even turn on the guest account I am too scared to suggest as you may not easily get connection back again.. The TC certainly displays a warning going to accounts.. I am not sure of warnings going away from accounts.
    If you didn't setup the TC, do you have admin access to it??
    Perhaps I am assuming too much before you tell me everything. But I may suggest things you don't want to try.. unfortunately I cannot say this will work.. the issue is widespread across the Mountain Lion TC combo and I have yet to see Apple suggest a solution or even fess up there is a problem. Daily reboots are just simply now a part of the scene for all windows and Mac users.
    Is the TC the main router for the network.. 1 hour is not default lease in the TC and very few people even know how to change it.. standard is 1day. I would consider 1hr adequately short for all arp tables to be kept up to date.. the computer should be seeking new lease at 30min.. ie half lease time.
    If the TC is bridged an not controlling the network.. that can contribute to the issue.
    Setting a static IP on the TC if it is bridged my help.

  • Cannot add time capsule to network wirlessly

    cannot add time capsule to wireless network

    You can do it easily by loading 5.6 utility into Mountain Lion.
    Here is a method. You can find others if you search or google around. Most use Pacificist which is paid software whereas this is free.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
    5.6 utility has more controls than later v6 utility.
    Apple moved these things to the automatic area.. but they do not always work.
    Go to the wireless setup..
    Hold down the option key when you select wireless mode.
    There is the option, join a wireless network.. you can use it.
    Please note the following.
    1. When you join a wireless network, the TC will become a dumb client. Ethernet will turn off.. wireless AP will turn off.. it is simply a disk connected by wireless.
    2. Backups will now be over the main retwork wireless and it will be extremely slow.. that is why it is a hidden option .. it never worked well. The TC is designed to be used by ethernet.

  • I cannot get time capsule back "on line" (green)

    I cannot get time capsule back "on line" (green); tried reset button; tried unplugging everything; comes back on flashing amber, won't get back to green; computer now can't find my network.
    what now?

    Ok.. we still need to know how are you connected to the TC.. YOU not the cable side.. the YOU side.
    Are you using wireless or ethernet to your computer? If not please plug in ethernet and turn off the airport in the computer.
    Now reopen the airport utility.. can it find it..
    If not press the reset on the TC for 10sec.. until the led on front flashes rapidly.
    The AU should now find the TC.
    Make sure you leave the TC in router mode.. unfortunately the later AU tends to bridge the TC without permission from you.. one of those extra helpful things Apple did.
    If you are still on Lion download and use 5.6 utility. It is far superior.
    http://support.apple.com/kb/DL1482
    You can also load it into ML but it is tricky.
    https://discussions.apple.com/thread/4172563?start=0&tstart=0
    Apple have removed useful functions and ease of use.. although I guess they would disagree with the later.

  • Windows Vista cannot see Time Capsule

    I had a network setup via Time Capsule with iMac, Macbook Pro and PC running Vista Business. I have lost internet connectivity on the PC and Airport utility cannot see Time Capsule. The PC is connected to Time Capsule via etherenet. How can I fix this?
    Message was edited by: doulos
    Message was edited by: doulos

    ONE PROBLEM THOUGH. I believe ONLY PROFESSIONAL versions of windows have the local policies acceptable. This means all of us using HOME editions are screwed.
    Home Edition users would have to perform a Registry edit as follows:
    1. Open registry editor (ref: Start > Search > Enter: regedit)
    2. Browse to HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    3. Create a new DWORD value with the following properties: NAME = LmCompatibilityLevel & VALUE = 1
    4. Restart your PC and try the connection again...

  • Time Machine Data Transfer - From FireWire Drive to Time Capsule - HELP!

    Time Machine Data Transfer - From FireWire Drive to Time Capsule - HELP!
    I've been searching for weeks for a solution to my problem. Here's the story I've come across since I installed Leopard on Oct. 26, 2007.
    I first installed Leopard on my Early 2006 MacBook and set up Time Machine with a 200GB external FireWire drive. Since then, things have been fine, until Time Machine started deleting the oldest backups. I'm a pack-rat and hated this feeling of losing data. So, I now have a few months worth of backups on my 200GB FireWire drive.
    The Time Capsule is released, I finally talk myself into getting one and transferring my old data from the 200GB drive to my 1TB TC.
    I did some researching through forums about how to move data from one Time Machine drive to another, so I took the concept and wanted to apply it to my Time Capsule. I made a DMG image of my 200GB drive, in order to move the data. I figured if I can make an image, copy it, and open it on the Time Capsule - all will go smoothly - just as some had mentioned they've done with external drives.
    Now, I have a 164GB DMG image of my Time Machine, with no hope in sight of gaining it back. I've tried taking the image, using Disk Utility, and restoring my original 200GB external with the imaged Time Machine data, but whenever I do, I come across error messages.
    In Disk Utility, I've done the following steps:
    * Disk Image is found on Time Capsule
    * I select the 200GB drive and select 'Restore'
    * I drag and drop the Disk Image to the 'Image' field
    * I drag and drop the 200GB drive into the the 'Restore' field
    * Select 'Erase Destination'
    * Select 'Restore'
    * I get the warning message that I'll erase the drive - I proceed
    * I enter my password
    Error message pops up:
    "Restore Failure: Could not find any scan information. The source image needs to be imagescanned/scanned for restore."
    I select the image in Disk Utility, then proceed with the following steps:
    * Click on "Image" then down to "Scan Image for Restore"
    * I enter my password
    After hours of waiting, I get another error message:
    "Unable to scan. (Broken pipe)."
    I'm going to see, after transferring the DMG to the Time Capsule, if I can drag-and-drop the files from the Time Capsule drive onto the 200GB hard drive.
    IF anyone has any more suggestions, please let me know!

    32 updates on this Mac since December 2007 - Hardware, software, OS...
    They keep coming at about 6 or 7 a month. Some of them I don't care about, but several are essential. 10.5.3 has been seeded to the testers a couple of times and will probably show up in the next few weeks. Jaguar wasn't worth a d*mn until 10.2.6, Panther about 10.3.4, Tiger about 10.4.4 - I'd say we are ahead or on schedule Too bad I can't get Apple to fix Spaces. I wish they'd focus on what I want but I guess some take more time than others.
    2007-12-18 00:32:39 -0800: Installed "GarageBand Update" (4.1.1)
    2007-12-18 00:32:43 -0800: Installed "QuickTime Broadcaster" (1.5.2)
    2007-12-18 00:33:07 -0800: Installed "Security Update 2007-009" (1.0)
    2007-12-18 00:33:29 -0800: Installed "QuickTime" (7.3.1)
    2007-12-19 09:32:03 -0800: Installed "MacBook MacBook Pro Software Update" (1.1)
    2007-12-23 23:57:32 -0800: Installed "Security Update 2007-009" (1.1)
    2008-01-16 09:18:07 -0800: Installed "iMovie Update" (7.1.1)
    2008-01-16 09:18:14 -0800: Installed "Front Row Update" (2.1.2)
    2008-01-16 09:18:45 -0800: Installed "iTunes" (7.6)
    2008-01-16 09:19:31 -0800: Installed "QuickTime" (7.4)
    2008-01-29 21:33:14 -0800: Installed "Keynote Update" (4.0.2)
    2008-01-29 21:33:23 -0800: Installed "Pages Update" (3.0.2)
    2008-01-29 21:33:31 -0800: Installed "Numbers Update" (1.0.2)
    2008-02-02 01:18:43 -0800: Installed "iWeb Update" (2.0.3)
    2008-02-05 20:12:17 -0800: Installed "iPhoto Update" (7.1.2)
    2008-02-15 09:03:49 -0800: Installed "iLife Support" (8.2)
    2008-02-15 09:04:17 -0800: Installed "QuickTime" (7.4.1)
    2008-02-15 09:04:51 -0800: Installed "Leopard Graphics Update" (1.0)
    2008-02-19 23:44:37 -0800: Installed "Keyboard Firmware Update" (1.0)
    2008-02-25 19:24:33 -0800: Installed "iTunes" (7.6.1)
    2008-03-03 17:14:18 -0800: Installed "GarageBand Update" (4.1.2)
    2008-03-03 17:14:31 -0800: Installed "iPhoto Update" (7.1.3)
    2008-03-12 18:11:36 -0700: Installed "AirPort Utility" (5.3.1)
    2008-03-18 10:03:57 -0700: Installed "Safari" (3.1)
    2008-03-20 13:00:58 -0700: Installed "Security Update 2008-002" (1.0)
    2008-03-20 13:01:04 -0700: Installed "Time Machine and AirPort Updates" (1.0)
    2008-03-21 22:49:16 -0700: Installed "Digital Camera RAW Compatibility Update" (2.0)
    2008-04-03 00:50:22 -0700: Installed "Front Row Update" (2.1.3)
    2008-04-03 00:50:50 -0700: Installed "QuickTime" (7.4.5)
    2008-04-03 00:51:58 -0700: Installed "iTunes" (7.6.2)
    2008-04-08 17:16:02 -0700: Installed "Keynote Update" (4.0.3)
    2008-04-08 17:16:08 -0700: Installed "MacBook Pro EFI Firmware Update" (1.5)

  • How is easy is to setup Time Capsule as a wifi router

    How easy is it to setup Time Capsule as a wifi router?

    The following would be the basic setup steps for the Time Capsule (TC):
    Modem/Router Power ReCycling
    o Power-off the Cable modem, TC, & computer(s); Wait at least 30 minutes.
    o Power-on the Cable modem; Wait at least 15 minutes.
    o Power-on the TC; Wait at least 5 minutes.
    o Power-on the computer(s)
    Either connect to the TC's wireless network or, temporarily, connect your computer directly (using an Ethernet cable) to one of the LAN ports of the TC, and then, using the AirPort Utility in Manual Mode, check these settings:
    AirPort - Base Station
    o Base Station Name: <whatever you wish or use the default>
    o Base Station Password: (optional)
    o Contact: (optional)
    o Location: (optional)
    o Set time automatically (optional)
    o Time Zone: <select your time zone>
    o Status Light: Always On (Default)
    o Allow configuration over Ethernet WAN port (unchecked)
    o Advertise configuration globally using Bonjour (unchecked)
    AirPort - Wireless
    o Wireless Mode: Create a wireless network
    o Network Name: <whatever you wish or use the default>
    o Allow this network to be extended (unchecked)
    o Radio Mode: 802.11n (802.11b/g compatible)
    o Channel: Automatic
    o Wireless Security: None
    AirPort - Wireless - Wireless Options
    o Region: <select your region>
    o Multicast Rate: 2 Mbps
    o Transmit Power: 100%
    o Create a closed network (unchecked)
    o Use interference robustness (unchecked)
    Internet - Internet Connection
    o Connect Using: Ethernet
    o Configure IPv4: Using DHCP
    o IP Address: <provided by your ISP>
    o Subnet Mask: <provided by your ISP>
    o Router Address: <provided by your ISP>
    o DNS Server(s): <provided by your ISP>
    o Domain Name: <provided by your ISP>
    o DHCP Client ID: (optional)
    o Ethernet WAN Port: Automatic (Default)
    o Connection Sharing: Share a public IP address
    Internet - DHCP
    o DHCP Range: 10.0 1.x
    o DHCP Beginning Address: 10.0.1.2
    o DHCP Ending Address: 10.0.1.200
    o DHCP Lease: 4 hours
    o DHCP Message: (optional)
    o LDAP Server: (optional)
    o DHCP Reservations: (optional)
    Internet - NAT
    o Enable default host at: (leave blank)
    o Enable NAT Port Mapping Protocol (checked)
    Once you have verified Internet access, I strongly suggest that you use wireless encryption (WPA or WPA2) to secure your network.

  • What does unable to print, cannot find time capsule mean?

    What does unable to print, cannot find time capsule mean?

    It is a communications error, read the posts to the right "More like this" maybe you will find some info there.

  • Help - G4 cannot see Time Capsule on Powerup

    Hi,
    I have one computer - an old G4, an iPhone and a PS3 connected to my Time Capsule (bought in May).
    -G4 is connected by Ethernet
    -PS3 and iPhone wirelessly
    I usually put my G4 to sleep, and wake it, and everything's fine.
    Twice now, the power has gone out, and when it comes back, the Time Capsule is green, and the PS3 and iPhone can see it. I boot the G4, and it cannot see it. The G4 also shows a date in 1969 (does that indicate other issues?).
    I have tried the following both times -
    Resetting the Time Capsule with the pin - does not work
    Unplugging and resetting the time capsule with pin - does not work
    Rebooting the computer and clearing out the PRAM - does not work
    Changing the date to after 2001 on the clock, - no help
    Of course, now that I've reset the time capsule, I can't configure it again and have lost the wireless connection.
    Last time I eventually got it to work - but it seemed random as to how. I'm frustrated, and I would like any advice possible. I hope it's the computer and not the Time Capsule. Any thoughts? Thank you in advance.

    Now I'm getting really annoyed.
    Went to see the mac genius today at the Apple store. Saw it wirelessly no problem.
    Saw it via Ethernet no problem. When I got him to check that there was a file on the hard drive he did it wirelessly though.
    Told me Time Capsule was fine (and I believe him). Told me to take it home, create a second ethernet connection, and trash preferences for "System Configuration" if necessary. Did all that, booted, found the Time Capsule no problem.
    Thought my problem was solved, but was it?
    Turned off the computer, turned it on a few hours later - will not see Time Capsule, Airport will not recognize it AGAIN. Tried trashing preferences and rebooting - it doesn't work.
    I'm able to connect the ethernet cable directly to the DSL modem and use PPPOE, it's fine.
    I don't get it. What else can I do?

  • Cannot join time capsule airport network from iPad 2 or iPhone 4

    I have recently setup a new time capsule airport base station network with my new iMac (27-inch, late 2012) running OSX 10.8.2. Wi-Fe network works fine for internet access and printing from the iMac but I cannot join the wi-fi network from our iPad 2 or iphones. The network is seen in the wi-fi setup when wi-fi is turned on with the ipad and phone but does not establish a connection. An IP address and subnet mask show under the DHCP settings but the connection is not established. (Continuous revolving wheel).
    Any help would be appreciated.

    The airport utility in Mountain Lion is a toyland version.. see bottom of post for installing v5.6 which improves the ability to actually make the TC do what you want.
    For whatever reason the iphone/ipad seem sensitive to wireless channels.. which Apple auto rotate.. I think it is bluetooth connection stuff.
    Anyhow jump in and set the following.
    Wireless should have strictly SMB names.. short no spaces, pure alphanumeric.
    Use WPA2 Personal security.
    Lock the wireless channel for 2.4ghz.. try in the following order.. 11, 6, 1 (those are the only non-overlapping channels) you can try in turn for which is best but if 11 works well stick to it.. Outside USA you can also use 13.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • Cannot access Time Capsule for backup, but wi-fi is fine

    Hi all,
    from time to time, suddenly any Mac in my house is not able to connect to TimeCapsule, while wi-fi is working fine. I can access Airport utility and see and configure the hardware.
    The only working solution is to switch off Time Capsule by unplugging power cable, then plug again.
    Time Capsule wil allow again to reconnect and back up via time machine.
    The log seems to show this message:
    1) Nov 18 08:28:55 MacBookPro-wzm.local com.apple.backupd[11737]: Attempting to mount network destination URL: afp://Name%20Surname;AUTH=[email protected]/Data
    2) Nov 18 08:29:53 MacBookPro-wzm.local com.apple.backupd[11737]: NAConnectToServerSync failed with error: 64 for url: afp://Name%20Surname;AUTH=[email protected]/Data
    3) Nov 18 08:29:53 MacBookPro-wzm kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 0 error 89 reqID 1 flags 0x9 afpCmd 0xF so 0xffffff8049064390
    4) Nov 18 08:30:03 MacBookPro-wzm.local com.apple.backupd[11737]: Backup failed with error: 18
    I don't know if line 3 is related to the question.
    All the machines are running Mountain Lion at latest version.

    Have you set up the TC with user accounts??
    Most people just use the TC password..
    I have done very little with user accounts on the TC.. it seems fundamentally wrong headed to me.. If you have a domain controller with everyone using accounts to login that is fine.. and the TC would then exist in connection to the domain controller.. but it is a home device and there is no function to all that.
    What will happen if you change over to standard security or even turn on the guest account I am too scared to suggest as you may not easily get connection back again.. The TC certainly displays a warning going to accounts.. I am not sure of warnings going away from accounts.
    If you didn't setup the TC, do you have admin access to it??
    Perhaps I am assuming too much before you tell me everything. But I may suggest things you don't want to try.. unfortunately I cannot say this will work.. the issue is widespread across the Mountain Lion TC combo and I have yet to see Apple suggest a solution or even fess up there is a problem. Daily reboots are just simply now a part of the scene for all windows and Mac users.
    Is the TC the main router for the network.. 1 hour is not default lease in the TC and very few people even know how to change it.. standard is 1day. I would consider 1hr adequately short for all arp tables to be kept up to date.. the computer should be seeking new lease at 30min.. ie half lease time.
    If the TC is bridged an not controlling the network.. that can contribute to the issue.
    Setting a static IP on the TC if it is bridged my help.

  • Cannot access Time Capsule spasebundle from migration

    Our time capsule is used to backup 3 Macs, yesterday our iBook power supply gave up the ghost after 3 years great service. Whilst we wait for the new one I was going to recover the account on to one of the other machines.
    When I use migration assistant to try and recover the account I only see the good two machines and not the one I need to restore from. If I use finder to view the time capsule disk I can see the sparsebundle and it has the same permissions as the others.
    Anybody have any ideas?
    Cheers

    Need a bit more info.
    Now this is what happens when I plug it in:
    Plug it into power?? The main router?? Sorry I am unclear what you are plugging it into.
    It sounds like you have not done the setup.
    The TC should be in bridge and plugged into the current modem router you have.. and powered on full time.
    If you cannot access it via the utility, I strongly suggest you buy the apple usb to ethernet dongle.. which helps air people no end.. or use any other computer that has a real ethernet port.
    Otherwise set to factory and start over. (this will not do anything to what you already have on the disk).
    Hold in reset and power on the TC.. wait about 10sec until the front led rapidly flashes. .then you can connect the computer.. and do the setup.. choose bridge in the Network section of the utility and update the TC.
    Then you can plug it into the main router and access it and internet at the same time.. either by TC wireless or the main modem wireless.
    Please note. .Gen1 TC is only going to last very little time.. it is already well past the average lifespan.. many died at 2years.. most gone by 4years.. plan on storing nothing important on it.

  • Cannot Access Time Capsule or Computer with MobileMe enabled

    I have back to my mac set up on my imac but when I connect to a different wifi or tether my phone I cannot access the Time Capsule or Back to my Mac I'm 100% it is set up right this is getting really annoying for an Apple product. I have comcast if thats of any help.
    Share disk over wan checked and allow setup over wan but still no dice. I tryed the dyndns way and it configured the dns for my domain I let it use but then it still wouldn't work so I just cancelled that and came back to square one.

    Need a bit more info.
    Now this is what happens when I plug it in:
    Plug it into power?? The main router?? Sorry I am unclear what you are plugging it into.
    It sounds like you have not done the setup.
    The TC should be in bridge and plugged into the current modem router you have.. and powered on full time.
    If you cannot access it via the utility, I strongly suggest you buy the apple usb to ethernet dongle.. which helps air people no end.. or use any other computer that has a real ethernet port.
    Otherwise set to factory and start over. (this will not do anything to what you already have on the disk).
    Hold in reset and power on the TC.. wait about 10sec until the front led rapidly flashes. .then you can connect the computer.. and do the setup.. choose bridge in the Network section of the utility and update the TC.
    Then you can plug it into the main router and access it and internet at the same time.. either by TC wireless or the main modem wireless.
    Please note. .Gen1 TC is only going to last very little time.. it is already well past the average lifespan.. many died at 2years.. most gone by 4years.. plan on storing nothing important on it.

Maybe you are looking for