Cannot share my screen but can share others

I am trying to screen share with my sister. She can share her screen with me, but I can't with her - the option for me to share is light grey. I also can ask to share hers, but she can't ask to share mine.

IN the toolbar menu under video at the bottom of the menu make sure you have the item labeled "Screen Sharing Enabled" checked. This will solve your problem.

Similar Messages

  • I cannot see my wifi network but can see others

    i cannot see my wifi network but can see other networks
    anybody knows the soln

    Your wifi network is not working. Restart it. Delete your wifi settings for this network via System Preferences, Network, WiFi, Advanced. Reconfigure and try again.

  • When using firefox I cannot signin to sites, but can get to sites with tabs on toolbar but cannot signout when I siginin, I have uninstalled the program and reinstalled it but still have the same problem?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/891666]]</blockquote>
    When using Firefox I cannot signin to sites, but can get to sites with tabs on toolbar but cannot signout whe signin, I have uninstalled the program and reinstalled it but still have the same problem.

    That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    You can keep an eye on this thread:
    *[[/forums/contributors/707748]]

  • I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen.  Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after  making room for the new A

    I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen.  Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after  making room for the new APp.  It can be opened, but I want the APP to be on her iPhone screen as well as on mine.  Help, please.

    Is the app downloaded on her phone also?

  • Start up Disk full and MacBook Pro won't reboot.  Only white screen but can sleep, restart, shut down.

    Start up Disk full and MacBook Pro won't reboot.  Only white screen but can sleep, restart, shut down.

    Reboot into Safe Mode (hold the shift key down at the sound of the chime, release when the progress bar appears) Safe Mode will take longer to boot than normal.

  • Cannot import audio CD, but can play! error: required disk cannot be found

    cannot import audio CD, but can play! When I try to import it appears an error: required disk cannot be found!
    Does someone knows a solution?

    There is no such thing as a "parser plug-in".
    That's not entirely accurate. In CS4 we use "EPS Parser.8BY" to assist in parsing of illustrator files. This plugin is normally located at:
    "C:\Program Files (x86)\Adobe\Adobe After Effects CS4\Support Files\Plug-ins\Format\EPS Parser.8BY"
    Is this missing for some reason?
    --chris

  • Cannot get on mozilla but can on the regular interent. is it down or having trouble?

    cannot get on mozilla but can on the regular interent. is mozilla down?

    Hi,
    Please see [http://status.mozilla.com/ this]. The HTTPS site seems to be having small performance issues.

  • Skype for Business - Cannot see shared screens, but I can share my screen

    I just started a new job and am required to use Skype for Business.  I downloaded Skype for Business 32 bit.  My PC is 64 bit but because I already have other Office 32 bit programs, I cannot install the 64 bit version. Everything in Skype for Business appears to work properly, except for the fact that I cannot see someone else's screen when they've shared it with me.  When someone shares their screen with me, all that I can see is the empty white box where their desktop should be.  When I share my screen with others, they can see my desktop correctly. What other information is needed to help diagnose this issue?  I really need this functionality in order to do my job properly. Thanks in advance for your help.

    I was using Lync as part of the offerings found on Office 365 and I was prompted to "upgrade" to Skype for Business and so I did per the suggestion.  Lync had screen sharing, Skype for Business currently does not have screen sharing!  This is a major dissapointment.  Who is the product manager and why the premature roll-out?  This is incredebly frustrating as most all my clients leverage Lync (their own install on their servers... have not upgraded yet.. lucky for them) and screen sharing is an important part of my interaction.  It took many of my clients a long time to master Lync and therefore, it is incredebly challenging to teach them how to use an alternative tool over the phone.  I feel incridebly duped.  My clients can share with me however, I cannot share with them.  What is the current timeframe for enabling (re-enabling) this functionality?  How can I get back Lync?   Is there a beta release of the next version?  Finally, how can this be called "Skype for Business" when a core aspect of the tool to conduct "business" had been stripped away without warning? 

  • Some users cannot "see" broadcast Public Access SSID but can all others...

    I've had 4 users in the last 3 days who've reported not being able to see our broadcast "public access" wifi SSID. Numerous users (even in same area, attached to same AP) can see it - however some cannot. The do see all of the other broadcast SSIDs, just not the public. The public is open and broadcast with security enabled. Does anyone know if this is a client issue - possible with a recent AV or MS security update? ("protecting" clients from unsecured networks by not displaying them?)

    If you notice that at a given time some users can and other can't see the ssid, it almost points to the client side. Compare drivers from the two clients and see if the driver versions are the same or old.

  • VPN Client can't reach router or hosts, but can reach other connected sites.

    We have a VPN client configuration on a 2901 router. The client passes authentication and connects fine. When connected, cannot reach the 2901 or any devices directly behind it, BUT can reach routers and hosts that are connected to the same 2901 through site to site connections.
    Few notes:
    I have added some lines excluding NAT in a few different ways, but does not resolve.
    I have switched the RAP rool from 10.96.20.x to 172.21.20.x and can then connect to the local host. Appears to be a routing issue to the 10.x network, but I can't seem to find the solution.
    Any help would be greatly appreciated. Here is the config:
    boot-start-marker
    boot system flash
    boot system flash:c2900-universalk9-mz.SPA.153-2.T.bin
    no ip domain lookup
    ip inspect log drop-pkt
    ip inspect name FIREWALL tcp
    ip inspect name FIREWALL udp
    ip inspect name FIREWALL ftp
    ip inspect name FIREWALL fragment maximum 256 timeout 1
    ip inspect name FIREWALL ntp
    ip inspect name FIREWALL pptp
    ip inspect name FIREWALL dns
    ip inspect name FIREWALL l2tp
    ip inspect name FIREWALL pop3
    ip inspect name FIREWALL icmp router-traffic
    no ipv6 cef
    crypto isakmp policy 1
    encr aes
    authentication pre-share
    group 2
    crypto isakmp policy 5
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp policy 10
    encr 3des
    hash md5
    authentication pre-share
    group 2
    crypto isakmp policy 95
    authentication pre-share
    group 2
    crypto isakmp policy 99
    hash md5
    authentication pre-share
    group 2
    crypto isakmp policy 110
    hash md5
    authentication pre-share
    crypto isakmp client configuration group VPN-RAS
    key *********
    dns 10.96.17.2 10.1.200.50
    wins 10.96.17.2 10.1.200.50
    domain mine.com
    pool RAPOOL
    acl SPLIT
    save-password
    split-dns mind.com
    netmask 255.255.255.0
    crypto isakmp profile USERS
       match identity group VPN-RAS
       client authentication list DOMAIN
       isakmp authorization list VPN-RAS
       client configuration address respond
       keepalive 300 retry 5
    crypto ipsec transform-set AES128 esp-aes esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set DES esp-des esp-md5-hmac
    mode tunnel
    crypto ipsec transform-set 3DES-MD5 esp-3des esp-md5-hmac
    mode tunnel
    crypto ipsec transform-set DES-SHA esp-des esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set myset esp-3des esp-sha-hmac
    mode tunnel
    crypto dynamic-map dynmap 1
    set transform-set AES128
    set isakmp-profile USERS
    crypto map COMPANY_VPN 10 ipsec-isakmp
    set peer *******
    set transform-set 3DES-MD5
    match address PA-VPN
    qos pre-classify
    crypto map COMPANY_VPN 50 ipsec-isakmp
    set peer ******
    set transform-set AES128
    match address VPN
    qos pre-classify
    crypto map COMPANY_VPN 999 ipsec-isakmp dynamic dynmap
    interface Embedded-Service-Engine0/0
    no ip address
    shutdown
    interface GigabitEthernet0/0
    ip address 37.222.111.224 255.255.255.248
    ip access-group INBOUND in
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip verify unicast reverse-path
    ip flow ingress
    ip flow egress
    ip nat outside
    ip inspect FIREWALL out
    ip virtual-reassembly in
    duplex auto
    speed auto
    no cdp enable
    no mop enabled
    crypto map COMPANY_VPN
    interface GigabitEthernet0/1
    no ip address
    ip flow ingress
    duplex auto
    speed auto
    interface GigabitEthernet0/1.17
    description LAN
    encapsulation dot1Q 17
    ip address 10.96.17.253 255.255.255.0
    ip access-group OUTBOUND in
    ip flow ingress
    ip flow egress
    ip nat inside
    ip virtual-reassembly in
    standby 0 ip 10.96.17.254
    standby 0 priority 110
    standby 0 preempt
    standby 0 track 1 decrement 20
    interface GigabitEthernet0/1.27
    description VOICE
    encapsulation dot1Q 27
    ip address 192.168.17.254 255.255.255.0
    ip access-group OUTBOUND in
    ip helper-address 10.96.17.2
    ip flow ingress
    ip nat inside
    ip virtual-reassembly in
    h323-gateway voip bind srcaddr 192.168.17.254
    ip local pool RAPOOL 10.96.20.50 10.96.20.150
    ip forward-protocol nd
    ip nat inside source route-map NAT-POOL interface GigabitEthernet0/0 overload
    ip route 0.0.0.0 0.0.0.0 37.222.111.223
    ip route 10.96.16.0 255.255.255.0 10.96.17.250
    ip route 172.22.1.0 255.255.255.0 10.96.17.250
    ip route 172.22.2.0 255.255.255.0 10.96.17.250
    ip route 172.22.3.0 255.255.255.0 10.96.17.250
    ip route 192.168.16.0 255.255.255.0 10.96.17.250
    ip access-list extended DMZ
    deny   ip any 10.0.0.0 0.255.255.255
    deny   ip any 192.168.0.0 0.0.255.255
    permit ip any any
    ip access-list extended GUEST
    deny   ip any 10.0.0.0 0.255.255.255
    deny   ip any 192.168.0.0 0.0.255.255
    permit ip any any
    ip access-list extended INBOUND
    deny   ip 80.25.124.0 0.0.0.255 any
    deny   ip 10.0.0.0 0.255.255.255 any
    deny   ip 172.16.0.0 0.15.255.255 any
    permit udp host 173.239.147.114 any eq isakmp
    permit esp host 173.239.147.114 any
    deny   ip 192.168.0.0 0.0.255.255 any
    permit udp any host 37.222.111.224 eq isakmp
    permit udp any host 37.222.111.224 eq non500-isakmp
    permit esp any host 37.222.111.224
    ip access-list extended NAT
    deny   ip 10.96.20.0 0.0.0.255 any
    deny   ip any 10.96.20.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 any
    permit ip 10.0.0.0 0.255.255.255 any
    ip access-list extended NONAT
    permit ip any 192.168.0.0 0.0.255.255
    permit ip any 10.0.0.0 0.255.255.255
    ip access-list extended OUTBOUND
    deny   udp any host 22.55.77.106 eq isakmp
    deny   udp any host 22.55.77.106 eq non500-isakmp
    deny   esp any host 22.55.77.106
    permit ip any any
    ip access-list extended PA-VPN
    permit ip 10.0.0.0 0.255.255.255 10.96.18.0 0.0.0.255
    permit ip 10.0.0.0 0.255.255.255 192.168.18.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 10.96.18.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 192.168.18.0 0.0.0.255
    ip access-list extended SPLIT
    permit ip 10.0.0.0 0.255.255.255 any
    permit ip 192.168.0.0 0.0.255.255 any
    ip access-list extended VPN
    permit ip 10.96.16.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.17.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.18.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.0.0 0.0.255.255 192.168.0.0 0.0.255.255
    permit ip 10.96.0.0 0.0.255.255 10.0.0.0 0.255.255.255
    permit ip 192.168.16.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.17.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.18.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.17.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 192.168.18.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 172.22.0.0 0.0.255.255 10.0.0.0 0.255.255.255
    permit ip 172.22.0.0 0.0.255.255 192.168.0.0 0.0.255.255
    route-map NAT-POOL deny 5
    match ip address NONAT
    route-map NAT-POOL permit 10
    match ip address NAT

    We have a VPN client configuration on a 2901 router. The client passes authentication and connects fine. When connected, cannot reach the 2901 or any devices directly behind it, BUT can reach routers and hosts that are connected to the same 2901 through site to site connections.
    Few notes:
    I have added some lines excluding NAT in a few different ways, but does not resolve.
    I have switched the RAP rool from 10.96.20.x to 172.21.20.x and can then connect to the local host. Appears to be a routing issue to the 10.x network, but I can't seem to find the solution.
    Any help would be greatly appreciated. Here is the config:
    boot-start-marker
    boot system flash
    boot system flash:c2900-universalk9-mz.SPA.153-2.T.bin
    no ip domain lookup
    ip inspect log drop-pkt
    ip inspect name FIREWALL tcp
    ip inspect name FIREWALL udp
    ip inspect name FIREWALL ftp
    ip inspect name FIREWALL fragment maximum 256 timeout 1
    ip inspect name FIREWALL ntp
    ip inspect name FIREWALL pptp
    ip inspect name FIREWALL dns
    ip inspect name FIREWALL l2tp
    ip inspect name FIREWALL pop3
    ip inspect name FIREWALL icmp router-traffic
    no ipv6 cef
    crypto isakmp policy 1
    encr aes
    authentication pre-share
    group 2
    crypto isakmp policy 5
    encr 3des
    authentication pre-share
    group 2
    crypto isakmp policy 10
    encr 3des
    hash md5
    authentication pre-share
    group 2
    crypto isakmp policy 95
    authentication pre-share
    group 2
    crypto isakmp policy 99
    hash md5
    authentication pre-share
    group 2
    crypto isakmp policy 110
    hash md5
    authentication pre-share
    crypto isakmp client configuration group VPN-RAS
    key *********
    dns 10.96.17.2 10.1.200.50
    wins 10.96.17.2 10.1.200.50
    domain mine.com
    pool RAPOOL
    acl SPLIT
    save-password
    split-dns mind.com
    netmask 255.255.255.0
    crypto isakmp profile USERS
       match identity group VPN-RAS
       client authentication list DOMAIN
       isakmp authorization list VPN-RAS
       client configuration address respond
       keepalive 300 retry 5
    crypto ipsec transform-set AES128 esp-aes esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set 3DES esp-3des esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set DES esp-des esp-md5-hmac
    mode tunnel
    crypto ipsec transform-set 3DES-MD5 esp-3des esp-md5-hmac
    mode tunnel
    crypto ipsec transform-set DES-SHA esp-des esp-sha-hmac
    mode tunnel
    crypto ipsec transform-set myset esp-3des esp-sha-hmac
    mode tunnel
    crypto dynamic-map dynmap 1
    set transform-set AES128
    set isakmp-profile USERS
    crypto map COMPANY_VPN 10 ipsec-isakmp
    set peer *******
    set transform-set 3DES-MD5
    match address PA-VPN
    qos pre-classify
    crypto map COMPANY_VPN 50 ipsec-isakmp
    set peer ******
    set transform-set AES128
    match address VPN
    qos pre-classify
    crypto map COMPANY_VPN 999 ipsec-isakmp dynamic dynmap
    interface Embedded-Service-Engine0/0
    no ip address
    shutdown
    interface GigabitEthernet0/0
    ip address 37.222.111.224 255.255.255.248
    ip access-group INBOUND in
    no ip redirects
    no ip unreachables
    no ip proxy-arp
    ip verify unicast reverse-path
    ip flow ingress
    ip flow egress
    ip nat outside
    ip inspect FIREWALL out
    ip virtual-reassembly in
    duplex auto
    speed auto
    no cdp enable
    no mop enabled
    crypto map COMPANY_VPN
    interface GigabitEthernet0/1
    no ip address
    ip flow ingress
    duplex auto
    speed auto
    interface GigabitEthernet0/1.17
    description LAN
    encapsulation dot1Q 17
    ip address 10.96.17.253 255.255.255.0
    ip access-group OUTBOUND in
    ip flow ingress
    ip flow egress
    ip nat inside
    ip virtual-reassembly in
    standby 0 ip 10.96.17.254
    standby 0 priority 110
    standby 0 preempt
    standby 0 track 1 decrement 20
    interface GigabitEthernet0/1.27
    description VOICE
    encapsulation dot1Q 27
    ip address 192.168.17.254 255.255.255.0
    ip access-group OUTBOUND in
    ip helper-address 10.96.17.2
    ip flow ingress
    ip nat inside
    ip virtual-reassembly in
    h323-gateway voip bind srcaddr 192.168.17.254
    ip local pool RAPOOL 10.96.20.50 10.96.20.150
    ip forward-protocol nd
    ip nat inside source route-map NAT-POOL interface GigabitEthernet0/0 overload
    ip route 0.0.0.0 0.0.0.0 37.222.111.223
    ip route 10.96.16.0 255.255.255.0 10.96.17.250
    ip route 172.22.1.0 255.255.255.0 10.96.17.250
    ip route 172.22.2.0 255.255.255.0 10.96.17.250
    ip route 172.22.3.0 255.255.255.0 10.96.17.250
    ip route 192.168.16.0 255.255.255.0 10.96.17.250
    ip access-list extended DMZ
    deny   ip any 10.0.0.0 0.255.255.255
    deny   ip any 192.168.0.0 0.0.255.255
    permit ip any any
    ip access-list extended GUEST
    deny   ip any 10.0.0.0 0.255.255.255
    deny   ip any 192.168.0.0 0.0.255.255
    permit ip any any
    ip access-list extended INBOUND
    deny   ip 80.25.124.0 0.0.0.255 any
    deny   ip 10.0.0.0 0.255.255.255 any
    deny   ip 172.16.0.0 0.15.255.255 any
    permit udp host 173.239.147.114 any eq isakmp
    permit esp host 173.239.147.114 any
    deny   ip 192.168.0.0 0.0.255.255 any
    permit udp any host 37.222.111.224 eq isakmp
    permit udp any host 37.222.111.224 eq non500-isakmp
    permit esp any host 37.222.111.224
    ip access-list extended NAT
    deny   ip 10.96.20.0 0.0.0.255 any
    deny   ip any 10.96.20.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 any
    permit ip 10.0.0.0 0.255.255.255 any
    ip access-list extended NONAT
    permit ip any 192.168.0.0 0.0.255.255
    permit ip any 10.0.0.0 0.255.255.255
    ip access-list extended OUTBOUND
    deny   udp any host 22.55.77.106 eq isakmp
    deny   udp any host 22.55.77.106 eq non500-isakmp
    deny   esp any host 22.55.77.106
    permit ip any any
    ip access-list extended PA-VPN
    permit ip 10.0.0.0 0.255.255.255 10.96.18.0 0.0.0.255
    permit ip 10.0.0.0 0.255.255.255 192.168.18.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 10.96.18.0 0.0.0.255
    permit ip 192.168.0.0 0.0.255.255 192.168.18.0 0.0.0.255
    ip access-list extended SPLIT
    permit ip 10.0.0.0 0.255.255.255 any
    permit ip 192.168.0.0 0.0.255.255 any
    ip access-list extended VPN
    permit ip 10.96.16.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.17.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.18.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 10.96.0.0 0.0.255.255 192.168.0.0 0.0.255.255
    permit ip 10.96.0.0 0.0.255.255 10.0.0.0 0.255.255.255
    permit ip 192.168.16.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.17.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.18.0 0.0.0.255 192.168.0.0 0.0.255.255
    permit ip 192.168.17.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 192.168.18.0 0.0.0.255 10.0.0.0 0.255.255.255
    permit ip 172.22.0.0 0.0.255.255 10.0.0.0 0.255.255.255
    permit ip 172.22.0.0 0.0.255.255 192.168.0.0 0.0.255.255
    route-map NAT-POOL deny 5
    match ip address NONAT
    route-map NAT-POOL permit 10
    match ip address NAT

  • HT5361 Cannot send e-mails but can receive them. Internet provider not at fault

    Help please ! I cannot send emails from my imac, but can from i-pad and i-phone. I can also receive emails. Any solutions?

    Information.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • 8330 crashed yesterday black screen but can hear emails, text coming in??? 3 friends same thing

    my bb 8330 crashed yesterday with screen going black and key board not working. sometimes the screen will light up but for only a few seconds and the key board wont work??? what's going on with the Rim software issue I hear about? I have 2other people  i know of that this happened to with their bb 8330? can anyone help... I am a business person and need my contacts and bb? thanks for your time.
    email me please [email protected]
    EDIT: Personal Information Removed - Information such as e-mail, phone number, IMEIs, and PINs are prohibited for security purposes.

    Model: 8330m
    Platform Version: 3.4.0.30
    App version: 4.5.0.138
    Mine started doing this on the 4th of July.  I could receive calls but not answer them, I could get text messages, but not view them.  The screen goes black when it goes into sleep mode and can not be woke up.  When calls come in it wakes the screen up, but still can't answer the call. 
    If I take the battery out I can move the track ball around but can not select anything and once I stop moving the trackball the screen goes black.  None of the keys on the keyboard work.
    It's done this twice and was broke for about a couple of days.  When it started working again the screen popped up and it was entering "252525252525252525" on the screen on it's own and then I got control of it again both times.
    I was out of town and on vacation when it happened and I couldn't take it to my provider, I called them from my wife's phone and they said it was a software problem.  So far it has not happened again, but I am still going to take it by my provider and see what they say.
    Ntelos
    Model: 8330m
    Platform Version: 3.4.0.30
    App version: 4.5.0.138

  • I am unable to print emails but can print other documents including email attachments

    I have a HP laptop dv4-1543sb and HP b210 series wireless all in one printer.  Am unable to print emails although I can print other documents including email attachments.  Have clicked on the  printer icon within the email.  Emails print with my other desktop computer.  ran diagnostic for printer and checked for updates but all is as it should be.  Any ideas?  Thanks

    This is the setup page from talk talk, it is for OS X 10.5 but should have enough information to check if your settings are correct.
    http://help2.talktalk.co.uk/email/set-talktalk-email-apple-mail

  • Why can I not open yahoo or facebook in my browser but can open other

    I can't open facebook or yahoo in my browser though, I can open other apps in my browser.  why is this?  HELP!

    Try quitting the browser and restart it.
    If that doesn't work, restart your computer. If it STILL doesn't work, download a different browser like mozilla or Chrome... or if you are using mozilla or chrome, try Safari

  • Unable to open or watch some projects but can watch others

    I am in the middle of making a movie but for some reason, iMovie will not play or allow me to edit the project. it will open another project but not these other two. also the playback will not work, on any of the three movies. PLEASE HELP D:

    Gink
    Thanks for the reply. Sorry that the news was not better.
    Have we determined if the program was installed to the default location Local Disk C?
    Have we ruled out any antivirus and firewall(s) as well as other security program issues in this matter, and
    you are not working in a school or company network? If we get down to last resort, we might consider uninstalling
    the antivirus instead of disabling Real Time Protection.
    More ways to go on this.
    1. You might consider the solutions suggested for 12 which would not open.
    ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
    2. You say that you have done the uninstall/reinstall with no solution to the problem.
    When you did this, did you go through
    a. uninstall the usual control panel route
    b. free ccleaner run through to get rid of leftovers from uninstalls/reinstalls
    c. reinstall with antivirus and firewall(s) disabled.
    3. Create a new user account with administrative privileges and install and try to open Premiere Elements 11 on that.
    4. Download and install tryout files for 11 from the following web site, insert your purchased serial number in them during
    installation.
    http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    To avoid an Access Denied message be sure to follow the web site's "Note: Very Important Instructions".
    Please let us know if any of the above gave us the break through in this that we seek.
    Thank you for the follow ups. Appreciated.
    ATR

Maybe you are looking for