Cannot solve the problem of not being able copy and paste in firefox. I have tried removing appInit.dll, new profiles, etc. with no luck. What is the problem?

I have not been able to copy and paste in firefox for the last two months. My research on the topic has led me to try the disabling all plugins, creating a new profile in safe startup, I removed appInit_dlls from my registry, could not find pushowxx adware, installed lastest version and updates of firefox, etc. All to no avail.

Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please  heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave

Similar Messages

  • TS3299 I do believe that Apply should send a patch to fix the issue of not being able to burn a cd

    Why hasn't Apple created a patch to rectify this problem of not being able to burn cd's ?  I have tried to go through the lengthy solution - holding my breath, not wishing to make things worse I tried but................. it didn't cure the problem.  A patch please Apple.

    Hello Country Linda,
    Thank you for your question. It sounds like you are unable to burn an audio cd in iTunes. Here is a general list of troubleshooting steps to check if you are having issues with iTunes burning your music to a disc.
    iTunes 11 for Windows: If you have trouble burning a disc
    http://support.apple.com/kb/PH12349
    In order to assist you better, would you mind providing more details on why you are not able to burn a disc? Is there an error message of any kind? What happens when you try?
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • HT201210 In the attempt of updating the latest itune software, i am faced with the problem of not being able to be connected to itunes with my ipod touch that is blocked living the USB cable and the itune icons on my touch sceen. Can some one help me out

    In the attempt of updating my ipod touch, i am  faced with the problem of not being able to be connected to the itunes in my computer (windows xp ) because my ipod touch got blocked up, leaving the icon of USB cable and itunes on my touch screen. I am asked to restore my ipod first, but i have tried using all the examples stated and still can't help. Please please, can some one help me out ? Ones  in the process of trying, i see an error code: 1656 and most of the time nothing. Thanks

    See if placing the iPod in Recovery mode will allow a restore via iTunes
    Next try DFU mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can also try another computer to help determine if you have a computer or iPod problem.

  • I'm at the end of my tether with not being able to access itunes which I could do perfectly well before! Now my laptop won't even connect to the internet despite the connection at the hub being excellent! No problem with ipad and phone - only windows!

    I'm tired of this problem of not being able to access itunes on my laptop and now no internet access despite connection and strength being excellent. What are windows playing at? Worked perfectly well until recently. Very frustrating and time consuming!

    Just a few lines to assure you you are not alone regarding speed delivery. By no means.
    I'm on Infinity 2 with HH5 - was virtually guaranteed 63 d/l and told possibly even up to 78. My actual speeds are nearer 15 (yes 15!) to 28 d/l if I am lucky. I've played all the obligatory games of checking and posting and reviewing my HH stats - and of course wasting my time with India "help" customer services who are instructed to read from a script of inane generalities which are usually completely irrelevant and have no connection whatsoever with a user's Specific problem.
    It more often than not turns out that the automated monitoring system imposes a software called DLM = Digital Line Management = which (with the endless excuse of improving line stability) increases noise margins and drastically reduces speed. This can kick in pretty rapidly and can take at least 3 to 4 days to modify itself - if indeed at all!!! Usually an Openreach engineer visit is then needed - who will re-set the Profile to what it is you are supposed to be paying for ..... then of course it is totally possible that DLM will re-emerge and the same old cycle of troubles will have to be endured.
    We pay in good faith at the outset on the back of so many promises - only to be cynically let down and dismissed once signed up. It is quite wrong we have to continually argue our case to (try) to get anywhere and are always reminded that we are tied into contracts with expensive escape clauses - or that an engineer's visit is only free IF it is proved the fault is not inside your house - which it very rarely is! This is often more an Ordeal than a subscribed service. Superfast reliable Broadband in the UK ? Ha!

  • Updated my mac to mountain lion 10.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install? Can anyone help me?

    updated my mac to mountain lion 10.7.8.3 and now my app store, mail or facetime won't open. Also, I am not longer able to play videos through firefox. I tried downloading the combo for mountain lion and it refuses to install saying that I need to see developer. Whenever I try to open my appstore, mail or facetime it says that the programmes need to be installed and might not be compatible with this version of mac operating system. Can anyone help me?

    It's not a bad install of Mountain Lion. I've had the same thing happen to me, but it affected not only Mail, but a variety of other programs including iPhoto and MS Office, where I had to delete preferences, caches, and reinstall the OS as well as the program itself. I'm still having issues with Mail, so I've gone to another program.
    Everything was fine upon the initial install. I restarted my iMac about two weeks after the install, and that's when the issues began to happen. I've reinstalled Mountain Lion twice, but the same issues arise.
    As I mentioned above, you'll need to figure out which preferences are causing the issue, then reinstall the program, as a fresh reinstallation will do you no good unless you wipe the drive completely.
    Here's a thread that helped me with iPhoto:
    https://discussions.apple.com/thread/4794375?start=0&tstart=0

  • I am unable to tell when the battery is completely charged.  I have showing the battery symbol with the bolt-this is present even when the device is not being charged.  And it is always showing 2% charge.

    I am unable to tell when the battery is completely charged.  I have showing the battery symbol with the bolt-this is present even when the device is not being charged.  And it is always showing 2% charge.

    Are you using the AC wall charger?
    To check status, I use System Activity Monitor app http://itunes.apple.com/us/app/system-activity-monitor/id306192663?mt=8 and System Status Lite app http://itunes.apple.com/us/app/system-status-lite-device/id407752428?mt=8
     Cheers, Tom

  • The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?

    I have recently switched from a PC to a MacBook Pro.
    I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
    Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
    This is the problem:
    The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
    Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
    I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
    Thanks!
    Roderick Guerry
    [email protected]

    Roderick Guerry wrote:
    The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
    No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
    Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
    (In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
    Roderick Guerry wrote:
    Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
    Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
    iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
    Roderick Guerry wrote:
    I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
    There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to.

  • Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

    What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

    You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

  • Safari will not let me copy and paste

    Safari will not let me copy and paste. I can still do it if I use Firefax as my browser.

    Please enable guest logins and log in as Guest. Launch Safari and test. Same problem?
    After testing, log out of the guest account and disable it if you wish.
    Mac OS X 10.6 Help: Creating a guest user account

  • I cannot copy and paste from Word 2007 into Firefox (gmail), and I cannot copy and paste from Firefox (URLs) into a word document.

    Starting two days ago, I can no longer copy and paste between Firefox and Word 2007. I can copy within each program.

    I had similar issues starting about the same time or within the past week. However, I can copy and paste, it just takes considerably longer than it used to before. Copying something from a web page into Word could take up to 30 seconds now on my computer but it shows a busy mouse pointer while it is loading, then clicks/pops when it loads into the Word document, but then actually takes about another 5 to 10 seconds to appear in the Word document. I have no idea why it is delaying now when it did not do it before, but since it is still going into the document I am living with it for now. Are you waiting long enough to see if it appears?

  • I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

    I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

    You know that you lost the layers when you saved it as a jpeg, right? But you're saying you can't add layers to the jpeg now when it's open in the editor? Go to Image>mode and be sure it's RGB, for starters. Are all the commands in the Layer menu grayed out?

  • Copy and paste titles wasn't supposed to automatically create a new title since the last update ?

    I thought that one of the updates during this year for premiere includes the smart idea of using titles the same way that FCP does, copy and paste creates a new title so when you change the content it will not affect the original title.
    but I just did copy and paste and it still using the same title asset so when I change one it affect it other one.
    please let me know if I'm doing anything wrong.

    Thanks ! that did the trick !

  • I am getting pop ups on safari and firefox lately and am worried i may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

    I am getting pop ups on safari and firefox lately and am worried I may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

    Please review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071
    http://www.thesafemac.com/tech-support-scam-pop-ups/

  • HT5922 I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

    Bonjour,
    I have some devices that i no longer use with AirPlay. What's the best way to remove those devices from the AirPlay List?

    In article <e35sc3$ru1$[email protected]>,
    "-->dan mode" <[email protected]> wrote:
    > > All
    > > I have a website I would like to remove from the
    internet, However I am
    > > planning on keeping the IP for a development
    location and would like to
    > > put
    > > a page up that says this site is no longer
    available. Is this how you do
    > > it
    > > or are there other pages to display when a site is
    removed.
    > > Thanks
    > > Dave
    Depending on how long the site has been active, it may be
    already
    spidered by search engines and cached. However, for the most
    part, I
    usually use my FTP program OR even Dreamweaver itself (now
    that I can)
    to delete files on the server just as I do locally. Hit the
    delete and
    confirm

  • TS1587 MacBook Pro 13" 2010, only beebs every four seconds when I try to start up. Have tried firewire connect to my iMac, open with utilities CD, pressed all the correct combination of keys during startup. Battery is fully charged. Will not startup!

    I am a long time user of Macs. 20+ years.
    This is my granddaughters 13" MacBook Pro we purchased for her in 2010 for college.
    I have tried everything I know including firewire connection to my iMac while holding the T key, two different utilities CDs (will not open them) and held various key combinations as recommended while start up. Computer just beebs ever four seconds.
    Battery is built-in but fully charged.
    Any ideas?

    Hello,
    Can you count the beeps or flashes?
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
    Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
    http://support.apple.com/kb/HT1547

Maybe you are looking for

  • Creative Cloud on multiple computers

    Can I install CC on both my laptop and desktop computer with one subscription?

  • Replace_all has no effect

    Dear experts:     I have came accross an issue in production system. An formula replace_all, REPLACE_ALL( '#', '', reference ), it cant replace '#' to ''. But I test it in develop system, it's OK.     So, how could I fix this issue? I have debuged it

  • Despite numerous uninstalls and fresh downloads, Itunes refuses to open in Wndows7 64bit mode?

    despite several uninstalls and fresh downloads,  ITunes will not open in Winows7 64 bit mode. Any suggestions please

  • Balance in cash flow

    hi,      i want   to create query just like cash flow report. but i dont  get    balance  in my query.   i have requred  balance       check out my query. SELECT          T1.refdate as 'Reference Date',         T2.duedate as 'DueDate',         T1.MEM

  • Steps to create Virtual Directory?

    I am very new to Weblogic and trying to create 2 virtual directories with the following permissions. name=cognos path=c:\program files\cognos\cer1\webcontent\default.htm permission=read name=cognos/cgi-bin path=c:\program files\cognos\cer1\cgi-bin pe