Cannot spell check the document with numbers?

The latest update has changed Numbers. I can no longer see the spelling errors for the entire document via the squiggly red line. I use Excel speadsheets imported into Numbers for my work. Spell check only works for individual cells but not the entire document. I am looking 50,000+ items. I need the whole document, not individual cells. Any advice?

Hi Bacchus,
Numbers 3.1
Two methods.
1. Menu > Edit > Spelling and Grammar > Show Spelling and Grammar
When it shows 'This word was not found in the spelling dictionary', choose a suggestion and Change then Find Next.
2. Numbers > Preferences > General > Editing > Show suggestions when editing table cells.
Regards,
Ian

Similar Messages

Cannot open the document with 'Composition failed to load'.

After confronting an error message during the publishing, I cannot re open the document with 'composition failed to load' message.
I desperately need to save this document! is there any chance to save it?
the screenshot is here.

Thank you for your help and advice.
It is great to be fixed in near future. good news!
Kim Kyoung Hong
Sent with Airmail
켜짐 2014년 10월 14일 에서 오후 3:58:58, Bharadwaj ([email protected]) 작성됨:
Cannot open the document with 'Composition failed to load'.
created by Bharadwaj in Edge Animate CC - View the full discussion
This is the error you are getting when you are opening the published content on web. This is a bug, but you can use the below fix.
Open the publish/web/index_edge.js and remove the "use strict"; statement at the beginning.
This will fix the problem. We will address this issue in the next release.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6822974#6822974
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Edge Animate CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

The document "abc.numbers" could not be opened [Numbers 09]

I’m getting the document “abc.numbers” could not be opened message. I’ve seen this posted about Numbers ’08 but I’m getting this dreaded message with Numbers ’09.
I’ve unzipped the file and cannot find anything that looks out of the ordinary to me. The buildVersionHistory.plist looks fine, as does the index.xml and QuickLook folder. When I compare these to a new, empty numbers file I can’t see differences besides those expected.
Any help would be very much appreciated!

May you attach the beast to a mail and send them to my mailbox ?
Click my blue name to get my address.
I wiil try to discover what is wrong.
I guess that something is wrong in the index.xml file.
I received several documents with this kind of problem.
In some of them, the xml file was truncated, in others, it appeared as a 'correctly built' file but Numbers was unable to decipher it. One erroneous character is sufficient to render such a file unusable.
This is why I wrote many times : backup, backup, backup…
This means : keep consecutive copies as my backup script is able to build.
Yvan KOENIG (VALLAURIS, France) samedi 23 janvier 2010 16:05:04

T-Bird does not spell check the subject line of an email. (v24.4.0).

Hello,
When composing an email I have chosen to have Thunderbird 24.4.0. check for misspelled words with both underline and spell check prior to sending.
While testing I noticed that it underlined and spell checked everything except the "Subject" line.
Thunderbird will underline misspelled words in the "Subject" line but won't look for a correct word prior to sending as it does with the body of the email.
Are you aware of this and is a fix on the way?
Thanks so much
-v-

Absolutely NO themes or add-ons whatsoever on my system. I run the program "as is" when downloaded (v.24.4.0). I restarted in safe mode as a you suggested. I got the same results - no spell checking in the subject line. Spell check drops directly to the body of the email. Spell checked the body fine. Running WIndows 7. I have also uninstalled and reinstalled to see if that would correct the problem. It did not.

Need to create the document with originals and checkin that document

HI Guys,
My requirement is to write a method to create the document with originals and checkin that document of DMS.
Plz suggest the approach to get this requirement solved.
Regards,
RSK

Hi Bala,
Thanks for the reply.
Iam writing the code under method like below.
Importing:
ls_doc type bapi_doc_draw2.
APPEND is_files TO it_files.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
    EXPORTING
      documentdata               = ls_doc
   IMPORTING
     documenttype               = iv_doctype
     documentnumber             = iv_docnumber
     documentpart               = iv_docpart
     documentversion            = iv_docvers
     return                     = iv_return
   TABLES
    documentfiles              = it_files.
Iam checking with document number , document type, document part, document version... it is throwing error message as
error while checking in and storing: version number(25).
Please advice whether it is correct approach?
Regards,
RSK
Edited by: shravan kumar ravula on Dec 22, 2011 11:24 AM
Edited by: shravan kumar ravula on Dec 22, 2011 1:26 PM
Edited by: shravan kumar ravula on Dec 22, 2011 1:26 PM

I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top, it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library option and check the Selected Artist - on

I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top,
it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library
option and check the Selected Artist … one.
I have changed the Sync option to Manually sync, but that does not help.
How can I change this to the second option?
Thanks.

There is a checkbox above those two options for how to sync. It says Sync Music; it enables automatic syncing. That box needs to be checked before you can select from the two options for how automatic syncing is performed.
NOTE: If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting). Please post back with more details about your situation.

Why is it that, "The document "Untitled.numbers" could not be saved." ?

The new version of TextEdit (Version 1.7 (289.3)) can save files to our server shared folder (mini server, raid 1 array, 10.7.3) and save changes, Numbers can only save them the first time. After that
The document “Untitled.numbers” could not be saved.
Console errors like
4/5/12 12:31:53.096 AM [0x0-0x46e46e].com.apple.iWork.Numbers: [ERROR] genstore_client_managed.c:GSClientManagedStorageCreate:299 Path "/Users/Me/Library/Autosave Information/85144DE8-E041-4514-BADE-FA63ED0FA3AF.genstore.noindex" passed to GSLibraryCreateClientManaged does not exist or is not a directory.
4/5/12 12:31:53.096 AM Numbers: NSDocument could not create temporary version storage at file://localhost/Users/Me/Library/Autosave%20Information/85144DE8-E041-4514-BAD E-FA63ED0FA3AF.genstore.noindex. Here's the error:
Error Domain=GSLibraryErrorDomain Code=2 "The operation couldn’t be completed. (GSLibraryErrorDomain error 2 - The supplied path does not exist.)" UserInfo=0x3397cb0 {NSDescription=The supplied path does not exist.}
4/5/12 12:31:53.096 AM Numbers: NSFileVersion couldn't find the library for a file. URL: file://localhost/Volumes/Creek/Banking/Taxes/Taxes%202011/Untitled.numbers
Tried
Finder > (menu) Go > Go to Folder..., enter /Users/Me/Library/Autosave%20Information, got access denied
Finder > (menu) Go > Go to Folder..., enter /Users/Me/Library and select the Autosave Information folder (denied flagged folder) and add myself to the permissions list with Get Info, click lock, password, +, Me from Users and Groups, Select, and...
Now save works, but wait for much disk grinding
This computer went from 10.6.8 and jumped to 10.7.3 and I had to split the RAID 1 array it started on to get the installation to restart and complete. Hints from the installer that some features would not be available (autorecover drive) didn't hit it would leave a folder crucial to operation of Apple's own software inaccessible.
The path does exist, Panda.
Why was that folder not accessible except to system? and hidden in the normally hidden /Users/X/Library for fun? with a nearly useless error?

As far as I know, the AutoSave feature as it is treated by iWork apps is unable to work on networks.
You must work on the local machine then copy the document to the network.
I guess that this annoying feature will strike until the delivery of the lond waited major upgrade.
Yvan KOENIG (VALLAURIS, France) jeudi 5 avril 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

Park the document with special GL posting

Dear Friends,
I want to park the document with special GL posting in Xn code F-43. But I
am getting the error message that:-
Special G/L transactions not defined for bills/exch.and down pmnts
Message no. FP030
Diagnosis
You have selected a posting key with a special G/L indicator of type 'Bill
of exchange', or 'Down payment'. Document parking is not defined for special
G/L transactions of the type 'Bill of exchange' or 'Down payment'.
System Response
Document parking cannot be carried out.
Procedure
Select a different posting key or special G/L indicator. If the posting is a
'One-time posting' to a rent contract, select a different transaction type
or post the document directly.
In FBKP, for this special GL in Properties, I have selected the option Down
Payment/Down Payment Request.
Any clue, how can we park the document with special GL without changing this
property of special GL as mentioned above.

Dear Abhishek,
I see your situation now clearly. See we also have this type of requirement. You have made a down payment of say 100 and vendor is adjusting 10% of this down payment in its one invoice. You can have this sets of entries:
1) Vendor Down Payment - TCode F-48 or (F-47 and F110)
     Vendor Account Dr Posting Key 29 Spl GL A - US$ 100
      Bank Cr Posting Key 50 - US$ 100
2) Post Vendor Invoice FB60 or FV60
    Expense Acct Dr Posting Key 40 - US$ 1000
    Vendor Acct Cr Posting Key 31 - US$ 1000
3) Clear Vendor Down Payment - TCode - F-54
    Vendor Account Dr Posting Key 39 Spl GL A - US$ 10
    Vendor Account Cr Posting Key 26 - US$ 10
So finally in your vendor account you will have 990 US$ to pay against invoice and 90 US$ as balance down payment to adjust.
Hope this meets your requirement.
Regards,
Sanjay

I downloaded version 4 and now I cannot connect to the internet with firefox. The lower version worked fine. It keeps saying I'm offline. Any suggestions?

I have used the older version of firefox and it worked fine. I downloaded version 4 and now cannot get on the internet with firefox. It keeps saying I'm offline and to check a particular box to correct the problem. I have no idea what they're talking about and would appreciate any help.

Ah I figured it out.....Mcafey was blocking it. Why on earth did AVG being uninstalled update mcafey settings, to block firefox?

How do i fix my ipod if the computer says itunes cannot connecet to the ipod with out entering your password?but i turn on my ipod and it says disabled connect to itunes?

how do i fix my ipod if the computer says itunes cannot connecet to the ipod with out entering your password?but i turn on my ipod and it says disabled connect to itunes?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...

Could not retrieve the document with the passed obsolete token.

Hi,
Issue is with the specific report not able to execute when the query is cancelled and getting an error when you are cancelling an already executing query.
Receiving an error message during running one of our report in the
following way:
- Run the Webi report
- Select the value for 8 prompts
- Click on cancel
- try to re-run by clicking on re-fresh and receive an error message.
The error message is the following:
"Could not retrieve the document with the passed obsolete token (Error: RWI 00323) (Error: INF)"
Till now we have made the following changes:
This might be caused by a storage token that identifies a document state, which is no longer available in the storage tokens stack.
In the webi.properties file, increased the value of storage tokens stack size.
1. Edit the webi.properties file found in the following location:
u2022 <Installed dir>\program files\businessobjects\BOenterprise115\Web services\en\dsws_webservice_boe\data\asemble\dsewsBobjJava\src\WEB-INF\classes\webi.properties.
2. Add or change the following variables:
u2022 WID_FAILOVER_SIZE (This sets the maximum number of tokens to keep in memory. It is 10 by default.)
u2022 WID_STORAGE_TOKEN_STACK_SIZE (this sets the maximum number of tokens stored on disk. It is 10 by default.)
u2022 Deleted cookies.
u2022 Add the Java Runtime Parameter value from following path:
Start - > Control Panel-> Java -> Java Applet Runtime Settings
Click on View.
Add the Java runtime Parameter value: Xmx200.
It is not a machine specific issue however it is intermittent.
Please advice.
Regards,
Pradnya Kokil

Hi Pradnya,
Following solutions might help you to resolve the issue.
Solution1:
To achieve optimum performance, the developer should limit the number of new windows that can be opened using the OpenDocument function, particularly if using it within the drill function.
If you must open a new window each time, you can increase the number of document instances available on the system by modifying parameters in the webi.properties file:
1. On the Business Objects server, navigate to the following directory:
C:\Program Files\Business Objects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\WEB-INF\classes
2. Open the webi.properties file using a text editor.
3. Uncomment the FAILOVER_SIZE=10 line by removing the # from the beginning of the line.
4. After FAILOVER_SIZE, add the following:
STORAGE_TOKEN_STACK_SIZE=40
5. Save the file.
6. Restart the application server
Solution2:
Do not use Control Key + N or File New from Browser for invoking new instance of Browser
Avoid opening Infoview by Hyperlinks.
Alternatively, by setting logontoken.enabled property in web.xml for desktop.war, will stop users allowing using old token
Locate web.xml file in desktop.war file deployed on your application server
Locate the following string in web.xml:<param-name>logontoken.enabled</param-name>
Change the <param-value> for logontoken.enabled from true to false (forexample, <param-value>false</param-value>)
Save and close the file
Restart the web application server to apply the changes
Regards,
Sarbhjeet Kaur

The document "navidad.numbers" could not be opened.

I created a document during december, and now I can't open it. It's really important, I need help here.
I doesn't gives me any explanation only the pop up saying: The document “navidad.numbers” could not be opened.
Message was edited by: jaimemtz

jaimemtz:
This might not help you at this point, but maybe if someone else comes along later, it will help them solve their problem.
I just had this exact same problem and from the looks of your document title, my fix might work for yours as well. I fixed the file by editing the index.xml file in the corrupted numbers file. Numbers '09 doesn't save documents as folders by default anymore, but you should be able to unzip them to folders using something like Unarchiver, 7zip, or a similar program (I used my default archive extraction program, which is called "The Unarchiver"). My problem was that I had put an obscure unicode character in the name of one of my tables. Look at the console output in Console.app and see if something similar doesn't show up. I just went into the text file, changed the offending characters to something from ASCII, and renamed the (unzipped) folder to have the .numbers extension, and the file openned without any issues.
Anyway, like I said, probably won't help at this point, but maybe it will help someone else later.
David

Is printing possible with script after the document with a password to prevent printing??

I saved a pdf with a password to prevent printing. When I open the pdf with Adobe Reader, I want print the document with automatic.
is this possible?? I used a many kinds method, all the scripts were refused because security level.
please give me a any hint...

Why did you prevent printing when you want print the file? That make no sense.

I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

I have got two photos by mail from iPhoto. My friend has put descriptions in the description field. The I got the mail I saw the description below each photo. If I check the photos with Preview they have Exif and JFIF fields but no IPTC field.

Does you friend use any accented letters in the descriptions? That might cause it but I don't know for sure.
Has he run any repair operations on his library, i.e. repairing the database file? Another possible fixe that's easy to apply is the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
The demo version of GraphicConverter can be used to view/check/edit the ITPC fields in an image file after exporting.

Spell checking dont working with "Automatic by language" option

Russian spell checking dont working with "Automatic by language" option in Sys. prefs.

Let Apple know at
http://www.apple.com/feedback

Cannot spell check the document with numbers?

Similar Messages

Maybe you are looking for