Cannot start add-on

Hi everyone,
I would like to install my add-on on a separate client pc. There was an error upon connecting my SAP Business One application to a server, with my add-on installed and connected. The error was "cannot start add-on" and the status of the add-on in the client is failed. How can we fix this error?
Thanks,
Omann

Check this links
Addon don't start
Cannot start an add-on
Error:AddOn [AddOn Name] can not start addon

Similar Messages

Cannot start an add-on

SBOers,
My registration used to work fine earlier. However, after a few install/uninstall of the add-on, now I cannot get my installer to start anymore.
Here are more details:
I have two VB.NET programs:
MyAddOn.exe
Installer.exe
1. Uninstalled the existing addon and deleted all the files under SAP Manage\...\AddOns directory.
2. Generated a new registration file.
3. Ran SBO client and registered the program. Selected "Force Install" from the addon administration UI. Registration goes fine.
4. Quick SBO client and ran it once again.
I get an error message "Cannot start the addon."
I have been playing around with various settings but no success yet. SBO client never runs my Installer.exe.
I have also tried to start the addon from the addon manager. No success there either.
I would appreciate it if someone can enlighten me on what could be going wrong.
Thank you in advance for your help.
Pradeep

Another reason could be that the SAP client is not registered properly. I do not know why this happens, but we had it happen with four clients.
Addons in 2004 would install on other clients allright, but not on these four.
Here is how I got them to work (there is a SAP note out on this issue):
stop sap client
Open a Dos-Box
Change to folder Program Files/SAP Manage/SAP Business One
Execute: sapbouicom /regserver
restart sap client again
HTH Lutz Morrien

I cannot not add iTunes to my iPad, I receive the following error message: This iPad cannot be used because the Apple Mobile Device service is not started.

I cannot not add iTunes to my iPad, I receive the following error message: "This iPad cannot be used because the Apple Mobile Device service is not started".

http://lmgtfy.com/?q=%22Apple+Mobile+Device+service+is+not+started%22

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?

The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

Cannot start Outlook 2013: "name cannot be resolved" / "connection to Microsoft Exchange is unavailable" / "___.ost is not an Outlook data file (.ost)"

My work e-mail has a double-login system, where my credentials for work access are one username and my e-mail is an alias of that first username, so they differ from one another. I suspect that's why I've been having the hardest time with Outlook 2013. I
was able to add my account just fine once but changed my mind about using Outlook and removed the account. Now I can't get back into Outlook for the life of me. The error messages that show up are:
1. It asks me to verify server and Mailbox. I've tried it with both usernames (the official work username and the e-mail alias) as my Mailbox info, followed by the email domain (even tried it without the domain) and it still won't verify when I click "Check
Name".
2. This message comes up: The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
3. Then once I click "OK" another pop-up says: Cannot start Microsoft Outlook. The file C:\Users\FirstLastname\AppData\Local\Microsoft\Outlook\FirstLastname.ost is not an Outlook data file (.ost).
Help?

Hi,
As per this KB article, the issue might occurs when some required registry key does not exist on your computer.
Please try the steps mentioned in it and see if it is helpful to you:
http://support.microsoft.com/kb/2264398/en-us
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

"User names cannot start with a number" error while adding a user

Is it possible to use WL Portal 7.0 admin framework to manage users with all numeric
user id ?
I got an error "User names cannot start with a number" while trying to add users
with all numeric user ids. I am using "portalAppTools" web app provided with WL
7.0 out of the box.
What "out the box" functionality do I need to change to make this happen ? Thanks
Shah

The problem is that when we have user groups starting with a number, then the search
feature doesn't work for user groups (case # 466837 with BEA).
So, which brings me to the following question:
a. Should the search feature work?
b. What is the limitation? I mean, it is designed not to allow user groups starting
with a number. So, there must be a reason for this. So, if we change "disallowFirstCharDigit",
will it have any impacts on Portal?
As an aside, it seems somewhat strange that the Portals can start with a number!
Thanks in advance
Venkatesh
"Ture Hoefner" <replyto@newsgroup> wrote:
Hello Shah,
Search your tools web app for the UsermgmtTools.properties file. In
my
installation, it is at:
D:\bea70sp1\weblogic700\samples\portal\sampleportalDomain\beaApps\sampleport
al\tools\WEB-INF\classes\com\bea\jsptools\p13n\usermgmt\servlets\jsp
It starts with this:
# Messages and other properties used by usermgmt jsp tools
# Name properties - UserBean and GroupBean
disallowedCharacters: ~`!$%^&-*() {}[]|\\/?<>,:;+="'
disallowFirstCharDigit: true
Ture Hoefner
BEA Systems, Inc.
www.bea.com
"Shah Sidi" <[email protected]> wrote in message
news:3db0a001$[email protected]..
Is it possible to use WL Portal 7.0 admin framework to manage userswith
all numeric
user id ?
I got an error "User names cannot start with a number" while tryingto add
users
with all numeric user ids. I am using "portalAppTools" web app providedwith WL
7.0 out of the box.
What "out the box" functionality do I need to change to make this happen?
Thanks
Shah

Itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?

itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Sound card problem - This device cannot start. (Code

hi all,
here's my situation...
i had a dell dimension 4400 that came with a sound blaster li've! value(wdm) sound card. i recently got a new motherboard/case etc. i transferred the sound card to my new system and i get a "This device cannot start. (Code 0)" error when i check device manager. for some reason, the game port on the sound card is working fine, but the audio processor part has the error. windows recognizes the card, but it won't use it. the card is a little over 3 years old.
now, i've read the forums, tried a clean install, registry tweaks, changed bios settings, even did a hd format. i also tried different pci slots. i have sp2 and all my other drivers are updated.
the new motherboard i have is a gigabyte 8ipe000g. i already contacted gigabyte, did not get much help. it has onboard ac97 audio. i disabled the onboard audio, but it did not seem to change anything. i have also tried windows drivers, the dell drivers from the cd, and the drivers from the creative website. none of them changed anything. i am now having trouble removing the drivers from add/remove programs. i keep removing them, but they still remain, even after using the wdm driver remover from the cd (a file named ctapxx.exe, or something similar). it's almost like windows is not actually installing the drivers when i install them. i'm wondering if the code 0 error is specifically driver related.
the first time i disabled the onboard audio and updated the drivers a weird thing happened. every time i started the computer up it would crash when it got to the desktop. it no longer does this for some reason, everything now starts up, but i have no audio. the sound card is the only device giving me problems on my system.
is there anything else i need plugged into the sound card? all i have is the sound card plugged into the pci slot, and an audio cord going from the card to my dvd dri've. is there anything that is supposed to go from the card directly to the motherboard? as far as i can tell, i have everything hooked up correctly. i don't understand why the game port works, but not the audio processor.
so, i have basically tried everything. seems like quite a few people get code 0 errors with some sort of hardware they have, but it usually seems like there is no definite solution.
does anyone have a similar problem, or a solution? hopefully i don't have to get a new sound card. i would just stick with my onboard audio, but i hear it can cause problems with games.

Since you have a new board it maybe a bios setting.
Is there IRQ conflict from the soundcard.
Maybe remove the card and unistall the software, use a tool "driver cleaner pro" to remove all creative files.
Check your mainboard manual on what pci slot that dont share, i hear slot 3 is the one to use, i use slot 5.
Fit the card and reinstall.
Best of luck.

Error 244: The DataFinder cannot start due to an internal error.

I have LabVIEW 2010 and, during Windows start-up, this error message pops up:
"The DataFinder cannot start due to an internal error.
(244): Please wait till the National Instruments PSP Service is running and try starting the DataFinder again or reboot your computer."
I have had this error message pop up for the past year so it is a recurring thing. It started showing up a few months after I had installed the LabVIEW program onto my computer, so I am not sure on what caused this message to consistently pop up. I find that it also causes a delay in the starting up of my computer--my other start-up applications will begin to show only when I close the error window. Please help! Thank you.
Solved!
Go to Solution.

Hi xcontradictorx,
It sounds like the National Instruments PSP Server Locator might not be started. Could you go to Control Panel >> Administrator Tools >> Services and locate the National Instruments PSP Server Locator? Double-click on it and make sure that the service is started. If it is, stop it and start it again (just by hitting the stop and start buttons). If it is not, start it, then go to the Recovery Tab and choose Restart the Service as the action for First, Second, and Subsequent failures.
If after change the settings for the PSP service the issue continues I would think that for some reason the PSP service is just being started late for some reason. Could you do a test real quick: disable the DataFinder in msconfig, reboot, then run the DataFinder.exe from C:\Program Files\National Instruments\Shared\DataFinderDesktop\bin. This should place the MyDataFinder app in your system tray (it looks like a yellow gear).
If this is successful, then we will need to change the order of startup services such that the DataFinder just starts after the PSP service.
Try the following:
1) Locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
2) Delete the DataFinder entry
3) Add a shortcut of DataFinder.exe to C:\Documents and Settings\All Users\Start Menu\Programs\Startup
4) Reboot
This should do all the standard Windows Startup (like starting services, etc.) and then launch the DataFinder.
One question: do you use the DataFinder at all? Either with DIAdem or the Data Finder toolkit? If not, you could try removing it from the Startup items. Just go to Start >> Run... and type "msconfig". Choose the Startup tab, locate DataFinder, and deselect it. Click apply. This will probably get rid of the error message.
Patrick H | National Instruments | Software Engineer

A reinstall of itunes is saying apple mobile device cannot start

I tried to update itunes on my PC and it stopped installing, giving me a message of "mobile device" cannot start, check to see if you have sufficient privaledges"

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Cannot find add-in '...\templates\Oracle Policy Modeling Excel 2010.xlam'

Quick little pointer to anyone who comes across this issue like I did. I went from using the 10.4.2 version of OPM to the Cloud edition and during the process moved the installation directory. After this time I started receiving the following message every time Excel opened:
Cannot find add-in 'path to OPA\templates\Oracle Policy Modeling Excel 2010.xlam'
To fix this you have delete the existing Add-In from Excel and add the new one:
Open Excel and go File > Options > Add-Ins
In the Active Application Add-ins list I could see the Oracle Policy Modeling one at the top with the incorrect path
At the Manage dropdown at the bottom, choose Excel Add-ins and then click Go...
In the dialog, click Oracle Policy Modeling Excel 2010 and then Browse...
Locate the new installation of OPA and go to the templates directory
Select the Oracle Policy Modeling Excel 2010.xlam file and click OK. Click OK again on the Add-Ins dialog.

Thanks Ross - I have logged this for internal investigation.

Cannot start the OracleXETNSListener

Hi,
I installed the Oracle XE Beta 3 on XP SP2 (let's call this PC PC1).
I cannot start it.
the listener service doesn't start.
==> C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start
OracleXETNSListener
The OracleXETNSListener service is starting.
The OracleXETNSListener service could not be started.
The service did not report an error.
As found in the forum, I tried
to add "TRACE_LEVEL_LISTENER = USER " in listener.or
to set SQLNET.AUTHENTICATION_SERVICES = (NONE) in sqlnet.ora
I checked the ports used by my PC (netstat /ab) ==> 1521 is not used.
I successfully installed it on another PC (PC2).
- on PC2, using JDBC (ojdbc14.jar) from a java client, I can access to the oracle base on PC2
but from my PC1, the same code doesn't work
==> java.sql.SQLException: Exception d'E/S: The Network Adapter could not establish the connection
- but from PC1, I can access to another oracle DB (9.2.0 on hpux)
Thanks a lot for your help.
Guillaume

LSNRCTL> status
Message 1053 not found; No message file for product=NETWORK, facility=TNSTNS-12557: Message 12557 not found; No message file for product=NETWORK, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
TNS-00527: Message 527 not found; No message file for product=NETWORK, facility=TNS
Guillaume

"Cannot Start Video Chat" error when trying to do video conferences

Ahoy!
I've recently upgraded to a new still camera that unfortunately doesn't work with iChatUSBCam, so I invested in a nearly-new iSight to use with my PowerMac G4 instead. Although one-way video chat conferences work fine, I keep getting the error "Cannot Start Video Chat" whenever I try to do a video conference.
The full error message reads:
"*Cannot Start Video Chat*
Your computer is not capable of initiating a multiperson video chat.
Click Text Chat to invite the selected people to chat."
There are no error codes or any other text in this message. The available buttons are the purple ?, 'Text Chat' or 'Cancel'.
I have tried this on both my 1.25ghz PowerMac G4 and my 1.33ghz PowerBook G4, and my friends I am trying to chat with have tried to initiate the conference on their 2.16ghz Intel Core Duo MacBook and MacBook Pro, only to receive the same messages too.
When doing a one-way videochat, the + button to add more people to the conference is greyed out for all of us as well. We all display the video conference button (camera with the extra pages behind it) next to our names on our buddy lists though, so our computers all believe we're capable of it!
When clicking the ? button on the "Cannot Start Video Chat" dialogue, it brings me to the help page that tells me:
+"To join a multiperson video conference, you need any G5 computer, or a 1 GHz single processor G4, or a dual processor 800 MHz G4, and a broadband connection to the Internet.+
+To host a multiperson video conference, you need any G5 computer, or a 1 GHz dual processor G4. In addition, you need an Internet connection that supports a minimum download bandwidth of 384 Kbps, and a minimum upload bandwidth of 384 Kbps."+
Both of my machines are above 1ghz G4s, so according to this help file, it shouldn't prohibit me from at least joining a conference when I'm not the host, but both of my Intel-based friends get the same message when trying to host as well. We are all on respectable Broadband or Cable internet connections, so that shouldn't limit it!
Anyone got any ideas what the problem is and how to fix it? I see no reason why this shouldn't work!
Thanks!

Hi
First have you all set the Quicktime streaming setting, goto sys prefs/quicktime/streaming/streaming speed, set to 1.5mbps(dont use automatic)
In ichats prefs click on video and change bandwidth limit to NONE.
Restart iChat.
Do a speed test on all sides and tell us the UP AND DOWNload speeds http://www.speedtest.net/
Tony

TS1347 I cannot manually add an appt to my iPhone 4S calendar

After I updated my iPhone 4S with new operating sys I cannot manually add events to my calendar.

It means that you have too many tasks running on your phone (in the background) and need to close them down. You do this by deleting the tasks from the multi-bar at the bottom of the phone screen.
To delete tasks off the multitask bar, click the button on the bottom/front of the phone twice quickly. This will dislay just the multitask bar at the bottom of the screen (generally you see Music, Phone, Mail, and Safari here). Then click one of those tasks and you'll see all the items in your multi-task bar start to wiggle. You can scroll across from right to left to see all the apps you still have running, even if you aren't using them. click the X on each of these to close the apss -- this will not delete them from your OS. I did this and am now able to create Calendar events again!

Win2k cannot start oracle services

Hi,
Usually, our oracle servers can start up autometically
when the machine start up.
Just now, oracle services cannot start. I try use
start->control panel->administrator tool-> services to
start oracle service, it gets errors as following:
could not start the OracleOraHome90TNSListener service on
local computer.
Error 5: Access is denied.
Then I try to use "lsnrctl start listener"
I got following errors:
Failed to start service, error 5.
TNS-12536: TNS:operation would block
TNS-12560: TNS:protocol adapter error
TNS-00506: Operation would block
32-bit Windows Error: 997: Unknown error
I check listener log file, no new message is add to it.
My OS is window 2000 professional.
Oracle server version: 9.0.1.1.1
Thank you for some advice.
Julie

Hi,
I try to fix it by change log on setting by
setting the oracle service as 'this account' and
fill in account and password with system administrator
account information. Then all oracle services can work
properly. But with this setting the web application which
connect oracle database cannot login to database.
It may be the registry database of the machine get
corrupted.
How can I delete all oracle services and recreate the
them again, then will re-register the service information?
By the way, all other services in system are log on as
localsystem account, only oracle services does not allow
me set up as localsystem account, if I did that way, oracle service will not start and complain "error 5:
access is denied"
Thank you for give me some guide lines.
Julie

Cannot start add-on

Similar Messages

Maybe you are looking for