Cannot start AMD Vision Engine Control Center

HP Pavilion p7-1534 Desktop PC, Windows 8, 64-bit, When i try to open AMD VISION Engine Control Center, I keep get this message,( AMD VISION Engine Control Center cannot be started. there are currently no settings that can be configured using AMD VISION Engine Control Center). This happen after i download and install some tech demos, that was two months ago. Today, i was going to do a restore but my restore points don't go back two months ago. What should i do. When i first bought this PC two months ago, i could open it fine.
This question was solved.
View Solution.

Hi arasthth. What is the exact model number of your DV6? What version of Windows is installed?
<How Do I Find My Desktop Model Number>: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07555
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

How do I uninstall an "AMD VISION engine control center" "program"? DV7 1264nr

How do I remove AMD VISION Engine Control Center that appears in my programs section? It does not appear in control center programs for uninstalling. It has never worked--when I try to open it, it is stopped. I installed it thinking it was an update to my preinstalled AMD audio program. I have Vista 64 bit on a HP pavilion dv7 1264nr. The error that comes up is "host application has stopped working" and the details are:
Problem signature:
Problem Event Name:    BEX64
Application Name:    CCC.exe
Application Version:    3.5.0.0
Application Timestamp:    4ca242ed
Fault Module Name:    StackHash_1a5d
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Offset:    0000000000000000
Exception Code:    c0000005
Exception Data:    0000000000000008
OS Version:    6.0.6002.2.2.0.768.3
Locale ID:    1033
Additional Information 1:    1a5d
Additional Information 2:    2763c682d3cf8924ea66429d911698ba
Additional Information 3:    3711
Additional Information 4:    a8feb839290a8e26ed1381ba97bf7bec

Thanks, ideato! That worked great, and I didn't really even have to restart Firefox to see that it did. I just changed it as you suggested, then opened a new tab, and ''voila'', it was blank!
For anyone else with this issue, if you use ideato's link to about:config, it takes you to a help page which says to type "about:config" into the browser's url field, which takes you to the page where this change can be made....

SAP PLM Engineering Control Center in India...?

Started discussing with customers on the new SAP PLM solution - Engineering Control Center.
I guess, downloads need to be made available for the partners...?

Sure, from sap.com/education contact details below:
Victoria Layo,
30, Vaswani Victoria ,Victoria Road,
Bangalore, 560 025
India
Tel: (91) 80 4136 5555
Fax: (91) 80 4136 5550
E-mail: [email protected]
Have fun,
Mike

CAN WE START AND STOP THE CONTROL CENTER SERVICES USING OMB?

Hi All,
I'm new into the world of OMB and currently i have been working with OMB scripts and i just need to know whether i am able to start the control center services using OMB...?
Any help will be highly appreciated.
Regards,
Shenoy

Thanks ALL, I GOT IT, but I used other solution.
Since I installed and uninstalled the Oracle several times, it keeps also many different Services for the listener. I don't know why, it didn't create a Service for my actual instalation with its path. In other words, all the services remained in the services.msc panel, had the path that was already removed from the Windows folder.
Then what I did, was that I picked one service, took its name (OracleOraDb10g_home1TNSListener), went to regedit to [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\OracleOraDb10g_home1TNSListener] and simply changed the image path that was setted for the one that was removed (C:\oracle\product\10.1.0\Db_2\BIN\TNSLSNR ) for mine that is installed right now
(C:\oracle\product\10.1.0\Db_1\BIN\TNSLSNR). Nothing more and finally works.
I have tried something in the services.msc panel before, as you can see in this forum at the thread "I can't start listener in the Control Painel/Admin Tools/ Services", but I never got
success.
Appreciate your time!!

Satellite L850 PSKACA: Win 8 AMD Catalyst Manager & Control Center instal

Satellite L850 PSKACA-03S011
Hi There
After installing Windows8 pro upgrade I have the following issue and not sure how to fix this
Was said I had to reinstall in windows 8
AMD CATALYST INSTALL MANAGER & ATI CATALYST CONTROL CENTRE
I need the info how to install these drivers AND LINK TO THE CORRECT DRIVERS TO DOWNLOAD
Please if someone can help
Tks Gill

Hmm it seems that just few Win 8 drivers are released for this unit.
Ive got another idea.
Win 8 supports and provides an own repair and fix options.
Here an useful and interesting information:
+Windows 8 Recovery & Repair+
http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
There are different ways to recover or repair a PC which are:
1. Refresh
2. Reset
3. Recovering using a recovery media
4. System Image Recovery
5. System Restore
6. Automatic Repair
7. Command Line
I would recommend trying the first option called *Refresh:*
The "Refresh" option is primarily a repair method. It is a great method of returning your PC to a known good state while preserving your files and a great deal of your configuration. With the "Refresh your PC" option, user accounts, data files, and some settings are preserved on your PC without the need to create a backup, or make choices about what to keep or remove

Cannot start the j2ee engine

hello.
we are facing a problem with the J2EE engine of WAS.
we stopped the server for some reasons and when trying to restart it, the server shows an error after loading the service manager ,in the server and the server is not getting connected.i am pasting the errors below:
"Loading: ServiceManager ...
ID000539: Classload error; Can't load service telnet because referenced service shell not found"
and
"ID000544: Error starting service security. JCO.classInitialize(): Could not load
middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
default_cpc_mode"
Also in the management console of the j2ee engine we are unable to find the database instance in the tree. we checked the view and nothing is hidden.
We will be thankful if anyone can throw some light. Thankyou

Hi,
AFAIK this error occurs when server/services/shell directory is missing. I think you have moved it somewhere or renamed it.
Also check the following link.
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/search%21default.jspa%3FforumID%3D45%26threadID%3D55413
Regards
Vijith

Cannot start weblogic after changing control flag

I read the article at http://edocs.weblogicfans.net/wls/docs81/secmanage/providers.html#1187595
I create 2 SQLAuthenticators, MySQLAuthenticator and testSQLAuthenticator (Someone told me that it is not necessary to do that. But I just do a test). In my weblogic 10.3.5, it has 2 default authenticators, DefaultAuthenticator and DefaultIdentityAsserter.
1, MySQLAuthenticator=testSQLAuthenticator=DefaultAuthenticator=OPTIONAL, weblogic can be startup
2, MySQLAuthenticator=REQUISITE, testSQLAuthenticator=DefaultAuthenticator=OPTIONAL, weblogic cannot be startup
3, MySQLAuthenticator=SUFFICIENT, testSQLAuthenticator=DefaultAuthenticator=OPTIONAL, weblogic can be startup
4, MySQLAuthenticator=testSQLAuthenticator=SUFFICIENT, DefaultAuthenticator=OPTIONAL, weblogic can be startup
5, MySQLAuthenticator=testSQLAuthenticator=DefaultAuthenticator=SUFFICIENT, weblogic can be startup
6, MySQLAuthenticator=REQUIRED, testSQLAuthenticator=DefaultAuthenticator=SUFFICIENT, weblogic cannot be startup
7, MySQLAuthenticator=REQUIRED, testSQLAuthenticator=DefaultAuthenticator=OPTIONAL, weblogic cannot be startup
In the article: REQUISITE—If the user passes the authentication test of this Authentication provider, other providers are executed but can fail (except for Authentication providers with the JAAS Control Flag set to REQUIRED)
Why I cannot set REQUIRED and REQUISITE to authenticators. Where is wrong?

The control flags you are using mean the following:
- REQUIRED – the LoginModule is required to succeed.
If it succeeds or fails, authentication still continues to proceed down the LoginModule list.
- REQUISITE – the LoginModule is required to succeed.
If it succeeds, authentication continues down the LoginModule list.
If it fails, control immediately returns to the application (authentication does not proceed down the LoginModule list).
- SUFFICIENT – the LoginModule is not required to succeed.
If it does succeed, control immediately returns to the application (authentication does not proceed down the LoginModule list).
If it fails, authentication continues down the LoginModule list.
- OPTIONAL – the LoginModule is not required to succeed.
If it succeeds or fails, authentication still continues to proceed down the LoginModule list.
Note that the MySQLAuthenticator and the DefaultAuthenticator are LoginModule in JAAS terms.
When you take the second option from your post - MySQLAuthenticator=REQUISITE and DefaultAuthenticator=OPTIONAL.
In this case when you login into WebLogic by using the admin password, the login procedure goes through the MySQLAuthenticator
and checks if the admin username and password are present if not as is noted above the whole login fails as the loginmodule
is flagged as REQUISITE and you cannnot login.
The same applies when you set a control flag to REQUIRED it has to succeed otherwise the whole logiin does not succeed

Start Button from Control Center Manager OWB 10.2.0.3.33

Hi Folks,
the start Button from the Control Center Manager is grey and I cannot run drop, replace, etc. jobs. I've tried with the owb owner with the same result. The Service is running. I also restart the data base but again the same result. Any ideas...?
Thanks
Pavel

Please forgive the simple first question:
Have you deployed these objects yet?

How to adjust HDMI overscan without catalyst control center? 2011

I have an unsolvable problem due to the lack of standard between Apple and AMD.
The problem is that i have a black frame arround my TV screen when i connect my MacBook Pro 2011 (15" 2.2Ghz) to my TV.
This is called overscan.
Now here is why i can't solve this (and why it is so frustrating):
-AMD cards send underscanned signal through an HDMI output by default.
-Having no native control for overscanning on Windows 7, the only way to adjust this is through AMD/ATI Catalyst Control Center software.
-The AMD Catalyst Control Center software is incompatible with the MacBook Pro 2011 and won't install.
Now is there a workarround for this?
If not, who is responsible (who should i turn to)?
Is it Apple for using a non-standard driver for the AMD graphic card?
Or is it AMD for not providing me with a compatible version of Catalyst Control Center?
PS: Of course Microsoft is responsible for not providing native overscan control in Windows 7

Hi C,
See if the TV has overscan settings or zoom.
http://hd.engadget.com/2010/05/27/hd-101-overscan-and-why-all-tvs-do-it/
In a perfect world broadcasters would mind their signal and ensure every pixel was worth watching, then TV manufacturers wouldn't feel the need for overscan -- or at least we hope. In the meantime we're just happy that most TVs have a way to turn it off. When an image is displayed properly, it's sometimes referred as 1:1 pixel mapping. This simply means that every pixel in the signal is displayed by a single pixel on the display. Of course each manufacture has its own name for this mode; like Samsung who sometimes calls it Screen Fit, and Pioneer called it Dot by Dot. No matter what it's called, it's rarely on by default -- even when watching 1080p24 from Blu-ray which never has garbage on the edges! -- so you'll have to find the button on the remote called something like format or P.size, depending on the brand. Your best bet is to read the manual -- shocker.

Name of the OWB control center service?

Is the control center a service that you can manually start/stop in Windows? If so, what is it's name?

Hi,
in the windows start menu, you find two scripts for starting and stopping the control center service.
Regards,
Carsten.

IPhone 5 rear camera and Flashlight app in control center did not launch.

Did any one experanice black out in the rear camera and can not function in the camera apps also cannot use the flashligh in control center (gray button) recently after the lastest update to ios 7.0.6 (11B651), I tried many restart and reset all setting?
Any one have any others idea or same situation??

Hi i had same issue .the "genius" will tell you ita hardware issue. Download a free app called Awsome Camera. Go into the app and then close it now switch to your iphone 5 camera and it should have reactivated somehow. dont ask me how it works as i havnt a clue just found solution on web. Apple told me i had a hardware issue andneeded to spend £200.00

T500 ATI Catalyst Control Center cannot be started

I have some troubles in opening the ATI Catalyst Control Center.There was a window poped out saying that ATI Catalyst Control Center cannot be started because the currently active GPU is not supported. I have already reinstall this drive and the graphic drive. But the problem is not solved. I am wondering what could I do now?

Right click on the battery in the task bar and make sure your Switchable graphics are set to Performance, if it is in energy savings the ATI control panel will not function, you need to use the Intel graphics setup instead.
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

T400, cannot start Catalyst Control Center - error "active GPU not supported"

on a t400 machine running vista business 64 bit.
last week all was hunky dory. this week, when i try to open my ati catalyst control center (CCC), i receive the following error:
"ATI catalyst control center cannot be started because the currently active gpu is not supported"
i've read some posts about this problem stemming from not using the ATI graphics card and rather being on the integrated graphics card. the posts indicated i could reenable CCC simply by clicking on the battery icon in the system tray and selecting "high performance mode" to force the machine to use the discrete graphics card. after i do this, and then try to start CCC, i receive the same error as above. also, at this point after the switch to high peformance mode, my device manager lists "mobile intel(r) 4 series express chipset family" as my display adapter still. if i left or right click on the battery icon in the tray, i do not see any options for switching cards explicitly.
the video driver for the mobile intel 4 adapter is listed as being from ATI at version 8.520.4.4000.
i am not sure of my driver version for the ATI card. nor do i know where to look for it.
to my knowledge, nothing aside from a number of "critical" windows updates have changed on my system between the time CCC was working last week and now.
any suggestions as to how to fix this? and what caused it to stop working?
thanks in advance for any help.
Solved!
Go to Solution.

i finally figured it out. and no new drivers or reinstalls were necessary. in the end, all i needed to do was turn on the lenovo version of the power manager (which appears in my taskbar as a horizontal green battery with the number of minutes of use remaining). from there i can left click and get to the menu that has the switchable graphics option where i can chose energy saving or high performance. if from there i select high performance, i can then open CCC.
the important thing to note from this is in order to get to this menu you have to be using LENOVO's thinkVantage power management program (which sticks the green battery icon on your task bar), NOT windows built in power manager, which appears as a vertical grey/blue/? battery in the system tray (at least on mine). once you have that on, you can explicitly switch the graphics cards.
the odd thing is, i'd been accessing CCC without explicitly switching cards with no problem up to last week. so somehow the default setting must of gone from high performance to energy saving, thus putting me on the integrated graphics card unless i switched it manually. weird.
slip, thanks for you help. i appreciate it. and that is an interesting note about freeing up more memory by disabling the switchable graphics. i will probably give this a shot and see how i like. more available memory never hurts!
thanks again to everybody that helped out.

Cannot start control center service

After installed OWB and created repository successfully, found that the control
center is not started.
=======================================================
SQL> @start_service.sql
Not available
Diagnostics:
service startup failure using command "/opt/app/oracle/product/10.2.0/OWB/owb/b
in/unix/run_service.sh -automatic 1 /opt/app/oracle/product/10.2.0/OWB OWB_OWNE
R LOCALHOST 1521 ORCL" reason ORA-29532: Java call terminated by uncaught Java
exception: java.io.IOException: service startup timeout: err= : out=2007/10/29-
09:49:10-EST [872380] Thin driver connection time - 1197 millisecond(s)
PL/SQL procedure successfully completed.
===========================================================
I then found that there are 3 procedures that are listed as 'INVALID' under owb_owner. Recompilation failed on all of them.
WB_OLAP_LOAD_CUBE
WB_OLAP_LOAD_DIMENSION
WB_OLAP_LOAD_DIMENSION_GENUK
The log file in ../owb/log directory shows that every couple of minutes a new log file generated on the following error.
2007/10/29-09:57:45-EST [872380] Error creating the temp directory /opt/app/oracle/product/10.2.0/OWB/owb/temp
even if I delete the temp directory the service is still not able to start.
service_doctor.sql simply shows:
======================================================
SQL> @service_doctor.sql
There are errors in one or more PL/SQL packages and functionsPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not availableService script is accessible to the database server
Connection information stored within the repository is correct
PL/SQL procedure successfully completed.
=======================================================
The OWB 10.2.0.1 is installed on Solaris 10 SPARC 64.
The DB 10.2.0.1 is on the same box.
It's very frustrating. Could someone lend some help please....
Wu

thanks User591458.
But I created the repository out of the same OWB installation, server and client.
I checked the owb/bin/Compatibility.properties.
==========================================================
ClientVersion = 10.2.0.1.31
MinReposVersion = 10.2.0.1.0
Features = 4335987675
MinRuntimeVersion = 10.2.0.1.0
MinRuntimePlatformVersion = 10.2.0.1.0
ADElabel = OWB_10.2.0_GENERIC_060509.2230.1.31.0
==========================================================
and ran rtrepos.report.sql
SQL> @rtrepos_report.sql
Host name is ac5-oraweb-01 Notes (1)
PL/SQL procedure successfully completed.
VERSION CONNECTION
SERVERSIDEHOME
INSTALLHOME NOTES
10.2.0.1.31 LOCALHOST:1521:ORCL
/opt/app/oracle/product/10.2.0/OWB
/opt/app/oracle/product/10.2.0/OWB (2)
=========================================================
I don't find a version incompatibility.

Cannot start gnome-control-center

Hi There:
I upgraded gnome-control-center because I had no Hardware/Printer option in Gnome-Control-Center, While upgrading it replace gtk-themes with another package. I dont get gnome-control-center anymore. I get this error
Gtk-Message: Failed to load module "gnomesegvhandler"
gnome-control-center: symbol lookup error: /usr/lib/libgtk-3.so.0: undefined symbol: g_application_get_type
Please help me get gnome-control-center and help me setup my HP LaserJet Printer.
Thanks,
Regards,
AJ

i finally figured it out. and no new drivers or reinstalls were necessary. in the end, all i needed to do was turn on the lenovo version of the power manager (which appears in my taskbar as a horizontal green battery with the number of minutes of use remaining). from there i can left click and get to the menu that has the switchable graphics option where i can chose energy saving or high performance. if from there i select high performance, i can then open CCC.
the important thing to note from this is in order to get to this menu you have to be using LENOVO's thinkVantage power management program (which sticks the green battery icon on your task bar), NOT windows built in power manager, which appears as a vertical grey/blue/? battery in the system tray (at least on mine). once you have that on, you can explicitly switch the graphics cards.
the odd thing is, i'd been accessing CCC without explicitly switching cards with no problem up to last week. so somehow the default setting must of gone from high performance to energy saving, thus putting me on the integrated graphics card unless i switched it manually. weird.
slip, thanks for you help. i appreciate it. and that is an interesting note about freeing up more memory by disabling the switchable graphics. i will probably give this a shot and see how i like. more available memory never hurts!
thanks again to everybody that helped out.

Cannot start AMD Vision Engine Control Center

Similar Messages

Maybe you are looking for