Cannot  start BSP application from browser

hi all
Cannot start standard BSP application TUTORIAL_1 through web browser. When i test TUTORIAL_1 , a seprate browser window opens which asks for login credientals but no contents are displayed.
i checked SICF service and they are active ,also i set parameter icm\server_port_0 and icm\host_name_full
Still i m getting a ABAP DUMP "CX_BSP_HOST_NOT_QUALIFIED" and no contents displayed in browser
Can you anyone please help me urgently?
Regards
Ujval

> What do you say ?
That a little bit of work is still required here. As you write that you don't want to restart application server, and this is only a test server, let me make a suggestion.
Do <u><b>NOT</b></u> change anything on the WebAS server.
<u>Step 1:</u> Find you hosts file (on my machine it is c:\winnt\system32\drivers\etc\hosts) and add the following line into this file.
1.2.3.4     myWebAS.domain.ext myWebAS
The name is not important, but must be a string you will remember. The 1.2.3.4 is the IP address of your WebAS. Please write in the correct value instead of my example value!
<u>Step 2:</u> Start you BSP application as usual. When the popup comes for your password, press cancel. You will now see in the top of the browser some URL of the form: http://myWebAS:port/sap/... The :port is only there if you are not using the default port 80. Now manually change the URL by adding the domain you configured previously. It should now be: http://myWebAS.domain.ext:port/sap/... Press ENTER to load this URL.
This way you are using a FQDN, and the browser is able to resolve this pseudo name onto the correct IP address. The WebAS/BSP will be happy with this.
Not the most satisfactory solution, but it should get you at least on the road.
++bcm

Similar Messages

  • Error: Page cannot be displayed when testing BSP application from SE80

    Hi:
    I am new to SAP 4.7. I need help in running BSP application from SE80. When I run, I am geting error the page cannot be displayed. Can some suggests/advice what are the neccessary steps ahould follow to run BSP application.
    Thanks,
    Venkat.

    Welcome to the forums and welcome to BSP. There are a few things we kindly ask
    Take a look at this weblog: <a href="/people/brian.mckellar/blog/2004/06/11/bsp-trouble-shooting-getting-help">BSP Trouble Shooting: Getting Help</a>
    That will help you jump several of the hurdles you'll come across as you get started.
    As for your problem if you are receiving the message "Service is not active" then you need to go into the transaction SICF in your system and follow the tree (take a look at the path in your browser /sap/bc/...) and select each until you get down to the one you are trying to look at and active it.
    If you are getting errors about other ones not activated then do the same for those.
    If you are not getting those errors and your browser is simply telling you "Can't find it or something" then in "Internet Options" in your browser advanced tab uncheck the "Show Friendly HTTP Errors".
    You can also check transaction ST22 to see if there is a short dump in which case that will help analyze the problem.
    Otherwise you'll need to give us more info including your SP level (recommend you jump up to at least 43 on ABA and BASIS)
    Message was edited by: Craig Cmehil
    OK so Brian was faster...

  • Calling BSP application from Portal causes error

    Hi,
    called a bsp application from our portal. The application prompts the following error message:
    BSP Exception: The object sap-tray-type=PLAIN_sap-tray-padding=X_sap_ep_version=7.00.200611091758_sap_ep_baseurl=http://v900stwmk1902.v900dtk1.v900.intern:50000/irj/portal in der URL /sap bD1kZSZjPTIwMCZwPTMwOTUxJnY9NyUyZTAwJmk9MSZzPVNJRCUzYUFOT04lM2Fhc2FwdDAzZW4xX1QwMl8wMCUzYXBFMVdnMmlqS21LYnNSZ01mMzIyLXpRdkwxMjdoYWF2NHFBeU9fTGEtQVRU)/bc/bsp/sap/zsi02/sap-tray-type=PLAIN&sap-tray-padding=X&sap_ep_version=7%2e00%2e200611091758&sap_ep_ is not valid.
    We used an BSP iView (EP 7.0 and BI 7.0) Any ideas?
    Thanks.
    Frank

    Hi,
    I am not sure how did you get that bsp-url but here are the steps:
    1) Create a system and assign an alias to it.
    2) Make sure you give proper values in Connector, User Management and ITS Property Category
    3) Check the connection by creating a sample SAP Transaction iview using WebGUI
    4) If this is working fine, then create a BSP iview. Make sure you select proper system alias, BSP Defination Type (BSP), give the correct Application Namespace, BSP Application, Customer Namespace and start page.
    Let me know what are the values you have entered here and we can try to fix this problem.
    Cheers,
    Sunil
    PS: Reward points for helpful answers.

  • Call BSP Application From ABAP

    Hi,
    I want to call BSP Application from ABAP. I've searched the forum and they all are displaying BSP Page in Container of the Screen. My requirement is to show it in a web browser. For that matter I am generating URL to call BSP Application. Following is the code which is throwing short dump.
    DATA: url TYPE string,
    l_appl TYPE string,
    l_page TYPE string,
    l_params TYPE LINE OF tihttpnvp,
    params TYPE tihttpnvp.
    l_appl = 'ZPWLS_SCH_RPT'.
    l_page = 'SELECTION_SCREEN.htm'.
      call method cl_http_ext_webapp=>create_url_for_bsp_application
        exporting
          bsp_application      = l_appl
          bsp_start_page       = l_page
          bsp_start_parameters = params
        importing
          abs_url              = url.
          CALL FUNCTION 'CALL_BROWSER'
           EXPORTING
             url                          = url
            WINDOW_NAME                  = ' '
            new_window                   = 'X'
            BROWSER_TYPE                 =
            CONTEXTSTRING                =
          EXCEPTIONS
            FRONTEND_NOT_SUPPORTED       = 1
            FRONTEND_ERROR               = 2
            PROG_NOT_FOUND               = 3
            NO_BATCH                     = 4
            UNSPECIFIED_ERROR            = 5
            OTHERS                       = 6
          IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    Thanks,
    Usman Malik

    What is the dump? also you should uncomment the following lines to receive the exception thrown by the FM
    * EXCEPTIONS
    * FRONTEND_NOT_SUPPORTED = 1
    * FRONTEND_ERROR = 2
    * PROG_NOT_FOUND = 3
    * NO_BATCH = 4
    * UNSPECIFIED_ERROR = 5
    * OTHERS = 6

  • Calling BSP Application from Business Object?

    Hi,
    Can any one tried to call BSP Application from Business Object for showing in the Portal.
    I have the following Scenario:
    1. BSP Page: User will input the Date and Submit to store in the Database. and in this page the Workflow will be truggered and a Work item will be sent to the Next Level User.
    2. When he executes the Work Item it has to trigger the BSP Application and has to show in the Enterprise Portal.
    All this has to happen in the Enterprise Portal.
    If any one knows how to triggere from business object, please let me know.
    Thanks & Regards
    Sumanth

    Hi Vijay,
    Thanks for the information. Its long back i was working on this, but not successful,
    Now the similar requirement i need to develope in R/3.
    I checked the mentioned class in R/3 4.7, This class is not available. I hope this is only in CRM because of PC-UI.
    Any Suggesions how can i achieve this execution of BSP.
    In one of the document i saw the Business Object BUS1006 as an example but i could not locate the way to reutilize the similar way.
    Thanks & Regards
    Sumanth

  • Execute bsp application from abap program

    How can I do to execute a bsp application from abp program ?
    I have two parameter in enter : text and language.
    And i have one paramenter in exit : translated text.
    Thanks for you help.

    but how to retrieve the result of the bsp ?
    Here is my source code :
    data: url type string,
             l_appl type string,
            l_page type string,
            l_params type line of TIHTTPNVP,
            params type TIHTTPNVP.
      l_appl = 'ZAPI_TRADUCTION'.
      l_page = 'appel.htm'.
      l_params-NAME = 'text'.
      l_params-value = 'pour le moment test'.
      append l_params to params.
      call method cl_http_ext_webapp=>create_url_for_bsp_application
        exporting
          bsp_application      = l_appl
          bsp_start_page       = l_page
          bsp_start_parameters = params
        importing
          abs_url              = url.
    DATA: http_client TYPE REF TO if_http_client .
    DATA: w_string TYPE string ,
          w_result TYPE string ,
          r_str    TYPE string .
    DATA: result_tab TYPE TABLE OF string.
      CLEAR w_string .
      w_string = url.
      CALL METHOD cl_http_client=>create_by_url
        EXPORTING
          url                = w_string
        IMPORTING
          client             = http_client
        EXCEPTIONS
          argument_not_found = 1
          plugin_not_active  = 2
          internal_error     = 3
          OTHERS             = 4.
          CALL METHOD http_client->send
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2.
          CALL METHOD http_client->receive
        EXCEPTIONS
          http_communication_failure = 1
          http_invalid_state         = 2
          http_processing_failed     = 3.
      CLEAR w_result .
      w_result = http_client->response->get_cdata( ).
      REFRESH result_tab .
    In the variable it brings me back the html source code of the BSP rather than run and bring me the result of the BPS.
    Thank you for your help.

  • I cannot download any applications from apps store. when i enter the required information to get the apps, it says that my postcode is not accuarate. i am international but i purchased my ipod from the US

    I cannot download any applications from apps store. When i enter the required information to get the app, it says that my post code is inaccurate. i am from the caribbean but i have purchased my ipod in the US. I have entered a US postcode where i stayed as well and it failed also.

    You can ONLY use the itunes store of your country of residence.
    You cannot use another countrys itunes store.

  • Cannot install any application from new Winows market.

    Cannot install any application from new Winows market. I click "Install" and... that's all... nothing more...
    P.S. I am on domain network.

    Hi and welcome to Apple Discussions.
    Don't worry, no special etiquette, we're all friends here
    What was the software that you installed that claims to "enhance the speed of your system"? The logical thing to do would be to uninstall the application and hope that it hasn't caused wider ranging problems. The SW, if only halfway reputable, should have come with uninstall instructions. Follow the instructions, reboot and see if your download problem is fixed.
    WRT to the slowing down that prompted your (misguided) installation of this SW there are many things that may be the culprit but the most common and easiest to fix is the remaining space on your HD. What size is your HD and how much free space is there? This info can be obtained by selecting your HD and keying Command (Apple) + I (the letter 'eye').
    Post back with the SW concerned and the remaining space and we can take it from there.
    Good luck,
    Adrian

  • Cannot access Siebel application through browser

    Hi,
    We have installed Siebel demo quickstart SIA 8.1.1 in one laptop.The Siebel application works fine. The only problem is that we cannot access the Siebel application through a browser. We have to launch the Siebel application from Windows program menu.We need to set up the Siebel application so that we can access it through IE browser. There are some settings that need to be set up in the .cfg files to make the application available trough Internet Explorer.
    We have already tried using the url http://servername:8081/callcenter_enu/start.swe? But it returns "page cannot be displayed". We are accessing the application from the host computer.
    Regards
    CP

    Are you able to connect with dedicate client?
    if yes, then you just to need to verify setting/configuration for web server. Which can be found in installation guide.
    Also could you please share logs. Error you are getting is quite generic and have multiple symptoms.
    Have you tried to search on Oracle Support. There is complete article available for this error.
    Regards,
    Rajesh Kumar

  • Cannot start X applications after a few days in the desktop

    I've seen an issue the last month or so, that after a period of time (unsure how long really, my computer is rarly rebooted), a few days or more, I'm suddenly not allowed to start X applications anymore.
    This includes both from the KDE start menu and from terminals. I only get this message:
    When trying to start kwrite for instance:
    Invalid MIT-MAGIC-COOKIE-1 key kwrite: cannot connect to X server :0
    Or with sudo I've seen:
    No protocol specified
    kwrite: cannot connect to X server :0
    This happens to all applications until I restart the X server and it's starting to get annoying to restart it every few days due to this. I checked my .Xauthority file and it is intact (I took a backup to see if it was mangled by something).
    There's nothing in the kernel logs or X.org log, only messages from boot time.
    I'm running testing on with the open source radeon drivers if it matters, x86_64.
    Has anyone else seen something like this?

    Similar issues have been solved by taking care of hostname, which may be tricker that expected https://bbs.archlinux.org/viewtopic.php … 3#p1271493
    MIT-MAGIC-COOKIE-1 issue: https://bbs.archlinux.org/viewtopic.php?id=163644 - no solution.
    If you're trying to run graphical apps as root or with sudo, read https://wiki.archlinux.org/index.php/Ru … ps_as_root

  • Calling a BSP application from a report

    Hi to everybody,
    I have one BSP(Business Server pages)application.I want to call that application from report.How to call BSp from report.

    The SAPGui HTML control is great way to show a BSP page.  You can create the HTML control (CL_GUI_HTML_VIEWER) in a full screen or subscreen (anywhere you can insert a container controll).  Best yet you can activate SSO for the HTML control so that the user doesn't get prompted for credentials.   The following is some code samples:
    CREATE OBJECT custom_container
        EXPORTING
          container_name              = 'CUSTOM_CONTAINER'.
      CREATE OBJECT html
          EXPORTING
            parent             = custom_container.
      CALL METHOD html->enable_sapsso
        EXPORTING
          enabled = 'x'.
      DATA: url TYPE string.
      DATA: url1 TYPE url.
      DATA: l_appl TYPE string,
            l_page TYPE string.
      l_appl = bsp_appl.
      l_page = page.
      CALL METHOD cl_http_ext_webapp=>create_url_for_bsp_application
        EXPORTING
          bsp_application      = l_appl
          bsp_start_page       = l_page
          bsp_start_parameters = params
        IMPORTING
          abs_url              = url.
      url1 = url.
      CALL METHOD html->show_url
        EXPORTING
          url = url1.

  • Calling a BSP application from another

    Hello,
        I have not a lot experince in bsp's programming.
        I am trying to call a bsp applicattion from another one. Do you know how can I do it?.
        Thanks in advance.  Javier.

    hi Javier,
    For questions on BSP programming,you should post your questions on the bSP forum.
    For your question,it depends on how you want to call your BSP application.
    Do you want to navigate from one BSP page to other or you want some link which leads to the other BSP application.?
    You can find sufficient help on the help.sap.com
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm</a>
    For more details, you can search SDN itself.
    IF you have more queries,your'e welcome.
    Regards,
    Siddhartha

  • Terminate air application from browser . Help !

    I have managed to call AIR application from flex application using
    airSWF.launchApplication(appID, pubID, arguments);
    How can i stop the AIR application from the flex application running in browser. Any help would be helpful.

    Did you try ...
    location.href = url

  • Launch air application from browser like adobe connect pro

    I will like to install and launch my adobe air application from the browser, just like adobe connect pro does. Any help on this?

    Did you try ...
    location.href = url

  • Start JavaFX application from Java

    Hello,
    I have the following scenario:
    I have a small JavaFX application and a big Java application. Now the Java App should call the JavaFX App to start up.
    Further the JavaFX App has to call some methods from the Java App. Is this possible?
    What is the best approach for my scenario?
    Maybe somebody has made some experiences ..
    thanks!
    Edited by: 799878 on 03.11.2010 07:54

    "Now the Java App should call the JavaFX App to start up."
    I'm assuming that the JavaFX code and the Java code are in the same application, correct? If so, then there are hacks available, but no standard way to start up JavaFX from Java will exist until the APIs have been ported from JavaFX script to Java.
    "Further the JavaFX App has to call some methods from the Java App. Is this possible?"
    Yes. Java can be called from JavaFX just fine. Just be careful if you use multi-threading or time consuming operations, since JavaFX script is apparently single threaded. Also be aware that netbeans normally compiles JavaFX applications with JSE version 1.5, so library features that did not exist until later versions will not be available by default.

Maybe you are looking for