Cannot start directory on a new evaluation install

I am trying to install Communications Suite 6 for evaluation, following instructions in the Sun Doc "Deployment Example: Sun Java Communications Suite 6 on a Single Host". This is on a Solaris 8 box (I was hoping I could get away with that). I have installed from DSEE.6.3.Solaris_Sparc_full, and created a Directory Server instance (dsadm create -p 389 -P 636 /var/ot/SUNWdsee/dsins1). When I try to start the instance using "dsmadm start /var/opt/SUNWdsee/dsins1 I get the following errors:
./dsadm start /var/opt/SUNWdsee/dsins1
[01/Apr/2009:15:52:39 -0700] - ERROR<4167> - Startup - conn=-1 op=-1 msgId=-1 - System error Load library /opt/SUNWdsee/ds6/lib/64
/pwdstorage-plugin.so: error ld.so.1: ns-slapd: fatal: libc.so.1: open failed: No such file or directory
[01/Apr/2009:15:52:39 -0700] - WARNING<4228> - Plugins - conn=-1 op=-1 msgId=-1 - Plugin configured as "/opt/SUNWdsee/ds6/lib/pwdst
orage-plugin.so" seems to belong to a different binary installation. Using specified path.
[01/Apr/2009:15:52:39 -0700] - ERROR<4167> - Startup - conn=-1 op=-1 msgId=-1 - System error Load library /opt/SUNWdsee/ds6/lib/64
/pwdstorage-plugin.so: error ld.so.1: ns-slapd: fatal: libc.so.1: open failed: No such file or directory
[01/Apr/2009:15:52:39 -0700] - ERROR<4140> - plugin_setup - conn=-1 op=-1 msgId=-1 - Configuration error Could not load symbol "ssh
a_pwd_storage_scheme_init" from library "/opt/SUNWdsee/ds6/lib/pwdstorage-plugin.so" for plugin SSHA
[01/Apr/2009:15:52:39 -0700] - ERROR<5255> - Bootstrap config - conn=-1 op=-1 msgId=-1 - Configuration error The plugin entry [cn=
SSHA,cn=Password Storage Schemes,cn=plugins,cn=config] in the configfile /var/opt/SUNWdsee/dsins1/config/dse.ldif was invalid
[01/Apr/2009:15:52:39 -0700] - ERROR<4122> - Bootstrap config - conn=-1 op=-1 msgId=-1 - Configuration error The configuration fil
es in directory /var/opt/SUNWdsee/dsins1/config could not be read or were not found. Please refer to the error log or output for mo
re information.
/opt/SUNWdsee/ds6/lib/64/ns-slapd -D /var/opt/SUNWdsee/dsins1 -i /var/opt/SUNWdsee/dsins1/logs/pid failed: err=1
Failed to start Directory Server instance '/var/opt/SUNWdsee/dsins1'
Is this because I am on Solaris ?

dpalix2 wrote:
I am trying to install Communications Suite 6 for evaluation, following instructions in the Sun Doc "Deployment Example: Sun Java Communications Suite 6 on a Single Host". This is on a Solaris 8 box (I was hoping I could get away with that). DSEE 6.3 is not supported on Solaris 8. I suggest you save yourself a lot of time and effort and upgrade to Solaris 10.
Regards,
Shane.

Similar Messages

  • Cannot get rEFInd to boot new Linux install

    I am trying to setup a fresh install of Arch on a new SSD on my 2007 MacBook 2.1. This particular MacBook has a 32 bit EFI system, but everything else is 64 bit. The wiki article has some information for installing on this particular MacBook, but the instructions aren't super thorough.
    This MacBook is already running Arch on an old HDD and is booting with grub. I remember that setting this up originally was a huge pain and I ended up installing arch onto the drive through another laptop (a Dell) with similar architecture and transferring the drive over once done. Unfortunately, I no longer have access to this other machine.
    In order to get started with installing to the new drive, I decided to use the arch-install-scripts from within my working installation to install Arch to the SSD connected through a SATA-USB adapter. The installation of Arch went fine and I can chroot to it no problem.
    Installing the bootloader has been the hard part. I have managed to get the computer to load rEFInd off the SSD if I set it up just right (installed as EFI/BOOT/bootia32.efi), and rEFInd can even detect and boot my old grub install from the HDD (as long as the HDD is internal and the SSD is attached over USB). Unfortunately, I cannot for the life of me get rEFInd to boot into the new Arch install on the SSD. I have tried placing the vmlinuz and init images in various locations to help with auto detection, and I have tried various combinations of manual configuration in refind.conf, but nothing seems to get me anywhere. The manual configurations just get me "Error: Not Found While Loading vmllinuz-linux" and the auto configuration only ever finds my old install.
    I'm happy to post any configuration files here that are useful, but I'm not sure what people would want to see.
    The SSD is setup as gpt with a fat32 ESP set to mount to /boot/efi, an ext4 partition set to mount to /, and a swap partition at the end.

    So, refind basically works/is started by the mb's firmware?
    Please post your refind.conf (without all the comments, no manual stanzas!)
    Also, to simplify things, I'm now assuming the ssd is the only internal drive installed, your old install/hdd is disconneted.
    Use the arch-install cd , refind should detect it and allow you to boot, once the installer-system is up and running, please provide ouptut from lsblk.
    Also, mount both partitons , and show what files are where  ls -l YOURROOTPART/boot  and ls -l YOURESPPART/ just to get a better overview.

  • Cannot start Forms Server on new install

    Hi:
    I am running Oracle 10g database release 10.1.0.5.0 (database running fine)
    I have installed from CD the Oralce Application Server - Forms and Reports Server Version 10.1.2.0.2
    The processes appear to be running fine.
    When I logon to AS Enterprise Manager, it shows "Forms" as being unavailable and the Home page shows a status of Down.
    From my browers I can run ...llocalhost:7777/forms/frmservlet?config=jiptest&from=jiptest
    How can I start the Forms Server? Where can I find the error log?
    Please help.
    Thanks.
    Bruce

    Thanks. That helps.
    Let me just ask you one other thing. I have a form app that runs fine on a different host. Now, I have a new host and a new database (same DB user and objects). When I try to launch the forms app, the scrren is blank but the status line show that that applet started.
    Must a recompile the app against the new database on the host or is there a way that I can debug why it is not opening correctly?
    Thanks.
    Bruce

  • Cannot Start BW Publisher Service after IK install

    I installed Integration Kit for 3.0 on a XI 3.0 deployment. After the installation, I was unable to start the BW Publisher Service. I also do not see the SAP Authentication drop down in CMC.
    I followed all the pre-reqs.....any idea what could be wrong? How can i troubleshoot this?
    Thanks,
    Kashif

    These are the steps I took:
    Pre IK Installation steps
    1. Extracted the contents the SAP Java Connector 2.1.8 into a folder on the server.
    2. Since the SAP GUI is already installed, the file u201Clibrfc32.dllu201D should already be present
    in the u201CC:\windows\system32u201D folder. Rename this to u201Clibrfc32.dll.oldu201D and copy the
    new one from the folder in step 1.
    3. Copied the u201Csapjcorc.dllu201D file from the folder in step 1 to the u201CC:\Windows\system32u201D
    folder.
    4. Copied the u201Csapjco.jaru201D file from the folder in step 1 to the u201CC:\Program Files\Business
    Objects\TOMCAT55\common\libu201D folder.
    And added to the Java ClassPath in Tomcat. Then I installed the IK.
    I assume the SAP Kit is installed ?
    Yes.
    Did you deploy the SAP Java Connector files ? (32bit)
    If deploying means what i mentioned above, then Yes.
    can you see a folder "SAP" in the webapps folder from TOMCAT ?
    No.
    Thanks for your help!
    Kashif

  • TS1398 I cannot start to use my new ipad mini as it is stuck at the very first step after restoring my old backup. It says to choose a wifi, I do and then it says 'Unable to connect' There is no options for a password and I cannot access any other screen!

    I have tried going past the first set up stage, still with no wifi. I have then tried restoring the ipad mini, still no wifi available. Both my ipone and Apple Mac have wifi full bars. Please help. I only picked up my new ipad today. I am thinking it may be faulty.
    Lele

    It may be faulty but you should try to activate it first in order to be sure.
    Why don't you activate it using iTunes on the Mac and then troubleshoot the WiFi connection. Connect the Mini to the Mac with the cable and iTunes should startup and take you through activation. If you do not autosync and iTunes des not start up on it's own, then launch it yourself.

  • Suddenly iTunes doesn´t work. Trying to reinstall I get error messages: "R6034 attempt to load C runtime library incorrectly", "Cannot start Apple Mobile device", "Not installed correctly Error7 (Windows error 1114)". What to do?

    Suddenly iTunes didn´t function. Trying to reinstall Ifirst tried to delete the program and all iTunes files, but ITunes Helper could not be deleted. After installation (with anti virus disconnected) the following error messages come up: "MS Visual C++ Runtime Library R6034 - attempt to load C routine library incorrectly", "Cannot start Apple Mobile Device", "Not correctly installed. Error 7 (windows error 1114" What to do?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. help!

    was just loading indesign and cannot start it. seem to have no rights for some presets. i deinstalled and installed new, same problem. who can help?

    Not easy if vital information is missing. Sometimes it seems like people are using the internet the first time...
    What version of Indesign?
    What OS? "Rights" sounds like Windows
    What is happening when starting it?
    If Windows, where was it installed?
    If Windows, do you have admin permissions?

  • HT1766 When I started my new iPad 2 I could not start from a previous backup because the os on the new iPad is not the latest 7.x used to backup the previous ipad2  to install the new os I had to start the iPad as new. But now I cannot backup from the pre

    When I started my new iPad 2 I could not start from a previous backup because the os on the new iPad is not the latest 7.x used to backup the previous ipad2  to install the new os I had to start the iPad as new. But now I cannot backup from the previously backup ipad

    Hi there,
    You may find the troubleshooting steps in the articles below helpful.
    iCloud: Troubleshooting restoring an iCloud backup
    http://support.apple.com/kb/ts4036
    iOS: If you can't back up or restore from a backup in iTunes
    http://support.apple.com/kb/ts2529
    -Griff W. 

  • Microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program

    Dear All    Good day
    i have Lync server 2010 and runing Good
    yasterday some users cann't open Lync Client and give us this error Massege
    microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows
    registry . please uninstall and then reinstall lync.
    but another users runing Good
    i'm try to unistall lync Client and install again but same problem
    and Try to Install New server lync 2010 but same problem
    please help me for resolve this problem
    Khaled Eldosuky
    Senior System Engineer
    [email protected]

    Hi All,
     I was not able to uninstall the trial lync client, and re-install a new client? Any help will be appreciated?
    All i see is the below message....
    microsoft
    lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows registry . please uninstall and then reinstall lync.
    Regards,
    Venkat

  • Satellite Pro A10: New Atheros/Askey WLan card but 'This device cannot start' code 10

    Hi there,
    I have a Satellite Pro A10 and have purchased an internal mini pci wireless adapter. The following information is displayed on my card:
    Askey WLL3070-D4(MOW)
    Atheros AR5BRB-43
    I installed the card, hooked up the ariel's and turned the laptop on...the switch at the front now lights up and windows xp finds the new ethernet adaptor. My problem is this...
    No matter what driver i install (and ive tried every Askey/Atheros etc driver from the first 20+ pages of yahoo/google) the card installs fine but then in device manager has a yellow ! next to it and says This device cannot start (code 10)
    I'm really stumped. I have some more ram coming in a few days at which point i shall be installng Vista which im hoping sorts my problems out but does anyone have any ideas?
    I've yet to find a driver which specifically refers to the AR5BRB or the model number WLL3070-D4.
    Does anyone have a location for a driver etc?
    thank you

    Hi
    I use always this page for WLan driver update:
    http://aps.toshiba-tro.de/wlan/
    This is a Toshiba WLan driver portal and there you can find all necessary WLan drivers
    Ciao

  • Cannot back up with Time Machine/Capsule after new drive installed in MacBook Pro

    MacBook Pro 2.53 GHz Intel Core 2 Duo running 10.8.5.
    I just had a larger hard drive installed by Tekserve. This is to be my first back up since installing the new drive. I have 2 back ups: one to my Time Capsule via WiFi, the other to an external Le Cie via USB.
    Time Machine just gives me preparing to backup but goes no further, just stuck in that mode. I suspect that it can't find my old drive, which it backed up till now. But I cannot find a way to correct this possible snafu. I do not see an option in Preferences.
    Any thoughts?
    Thanks

    Just so we are clear.. were your files all recovered from backup after the install of the disk?? Did you supply one of the backups to the company who did the installation so they could do the recovery?
    You do want to be careful not to damage the old backup.. it might really be better to start over a clean new backup.
    TM should be reset. It sounds like they did recover your settings.. Please check Pondini here.
    A4 http://pondini.org/TM/Troubleshooting.html
    Also use A1 to check what the log is saying about TM.. the old backup will need to be fully indexed and checked if you intend to keep using it.. and that will take several hours to the TC if you use wireless.. The problem people expect fast starts but that is not possible unless you are doing a new backup.
    You can also check some of the other help files there eg D1 long preparing for why that happens.

  • I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

    I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

    Those links weren't particularly helpful to me. They convinced me to install the drivers for my USB 2.0 card, but that didn't make a difference. Still no OS X without a PRAM reset if I've dared to venture into OS 9.
    It's always been my understanding that an unblessed System Folder will not be selectable in OS 9's Startup Disk control panel. My folders are blessed and healthy. Of course I'm running 9.2.2, as stated in my first message. I also frequently verify and repair my disks and permissions.
    I did a verbose startup of OS X, and noticed something funny about "ATY...too old." Perhaps this problem is related? I ventured into my system.log file and there it was, repeated over and over, everytime I've booted this computer:
    Aug 8 18:30:24 localhost kernel: From path: "/pci/@d/pci-ata@1/ata-4@0/disk@0:10,\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/pci/@d/pci-ata@1/ata-4@0/@0:10</string></dict>
    Aug 8 18:30:35 localhost kernel: ROM ndrv for ATY,Rage128y is too old (0xb3383430)
    Aug 8 18:30:41 localhost init: kernel security level changed from 0 to 1
    Anyone know how to interpret that? Is it related to my problem? I googled it, and all I found was a web board of people arguing over whether the Apple installed stock ATI Rage video card that came in the G3's is appropriate for Panther. The Ye's have it as far as I'm concerned...as long as I leave OS 9 alone, my video is fine on this computer!
    14" iBook G3 800, B&W PowerMac G3 350, Mac Classic II 16 :-P   Mac OS X (10.3.9)   System 7 Rocked!

  • Cannot Start SI4 After New License

    I have a test drive version of NW 4 running on Suse 9.2 Linux and db2.  It ran fine for 3 months.  Yesterday I installed a new license because the old one expired.  I installed it as root while the db was running.
    This morning, I cannot start sap, because the database won't start.
    The following is the output of R3trans.  Can anyone give me any suggestions on things to try to resolve it?
    4 ETW000 R3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 30.10.2005 - 07:08:07
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d -w xx.log
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Sun Oct 30 07:08:07 2005                             148  0.000148
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    27  0.000175
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                             59  0.000234
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' ...
    4 ETW000                                                                              57  0.000291
    4 ETW000  [dev trc     ,00000]  load shared library (/usr/sap/SI4/SYS/exe/run/dbdb6slib.so), hdl 0
    4 ETW000                                                                           21464  0.021755
    4 ETW000  [dev trc     ,00000]  Library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' loaded
    4 ETW000                                                                              59  0.021814
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              59  0.021873
    4 ETW000  [dev trc     ,00000]  Version of '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' is "640.00", patchlevel (0.7)
    4 ETW000                                                                             137  0.022010
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              40  0.022050
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              40  0.022090
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              35  0.022125
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              45  0.022170
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         31  0.022201
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              37  0.022238
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              39  0.022277
    4 ETW000  [dev trc     ,00000]  RLIMIT_STACK: current=-1, max=-1                     296  0.022573
    4 ETW000  [dev trc     ,00000]  DB6 (DB2 UDB) database interface 640.00 [opt]         31  0.022604
    4 ETW000  [dev trc     ,00000]  DB6 shared library (dbdb6slib) patchlevels            27  0.022631
    4 ETW000  [dev trc     ,00000]    (0.6) DB6: Schema setting for remote monitoring (note 711477)
    4 ETW000                                                                              36  0.022667
    4 ETW000  [dev trc     ,00000]    (0.7) DB6: support DB6_DB_TYPE=DB2/400 (note 663756)
    4 ETW000                                                                              35  0.022702
    4 ETW000  [dev trc     ,00000]    (0.7) DB6: CTE on UNICODE (note 717357)             23  0.022725
    4 ETW000  [dev trc     ,00000]  Supported features:                                   22  0.022747
    4 ETW000  [dev trc     ,00000]    - smart optlevel handling (non-UR, FAE)             32  0.022779
    4 ETW000  [dev trc     ,00000]    - SQLExtendedBind for LOBs and Unicode (V8 or higher)
    4 ETW000                                                                              38  0.022817
    4 ETW000  [dev trc     ,00000]  ..retrieving configuration parameters                 87  0.022904
    4 ETW000  [dev trc     ,00000]  ..done                                               136  0.023040
    4 ETW000  [dev trc     ,00000]  Sun Oct 30 07:08:08 2005                           97739  0.120779
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1497] (BEGIN)        67  0.120846
    4 ETW000  [dev trc     ,00000]  &+***      DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1032N  No start database manager command was issued.  SQLSTATE=
    4 ETW000                                                                              46  0.120892
    4 ETW000  [dev trc     ,00000]  &+***      57019                                                                           
    4 ETW000                                                                              37  0.120929
    4 ETW000  [dev trc     ,00000]  &+***                                                                               
    4 ETW000                                                                              36  0.120965
    4 ETW000  [dev trc     ,00000]  &+***                                                                               
    4 ETW000                                                                              37  0.121002
    4 ETW000  [dev trc     ,00000]  &+***      ABAP location info '', 0                                                        
    4 ETW000                                                                              49  0.121051
    4 ETW000  [dev trc     ,00000]  &+***                                                                               
    4 ETW000                                                                              35  0.121086
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1497] (END)          23  0.121109
    4 ETW000  [dbdb6.c     ,00000]  *** ERROR => DbSlConnect to 'SI4' as 'sapsi4' failed
    4 ETW000                                                                             138  0.121247
    2EETW169 no connect possible: "DBMS = DB6                              --- DB2DBDFT = 'SI4'"
    si4host:si4adm 77>
    si4host:si4adm 77> db2admin start
    db2admin: Command not found.
    si4host:si4adm 78> db2admin
    db2admin: Command not found.
    si4host:si4adm 79> db2start
    10/30/2005 07:36:36     0   0   SQL8000N  DB2START processing failed; a valid product license was not found.
    SQL1032N  No start database manager command was issued.  SQLSTATE=57019

    Yes, startsap is the base script, which calls other scripts, R3trans and db2start.
    I didn't have any luck.  I did find an indication on an IBM website that the error message related to the fact that the db2 license had expired.  There is a command called "db2licm" which you can run to update the db2 license, but I couldn't find a license file.
    I wonder if IBM imposes it's own license expiration separate from SAP's, and that IBM require a re-install.  So, I gave up and just re-installed it.  Oh well, re-installing is good practice.
    Sorry I couldn't help you.

  • I just bought a new Mac Book Pro and did a migration of the content of the old laptop (also a Mac Book Pro) to the new one. Now I cannot start Photoshop CS6. When I am starting it I have a window "Adobe photoshop CS6 extended" opening requesting a connexi

    I just bought a new Mac Book Pro and did a migration of the content of the old laptop (also a Mac Book Pro) to the new one. Now I cannot start Photoshop CS6. When I am starting it I have a window "Adobe photoshop CS6 extended" opening requesting a connexion. When I am entering my password for the connexion the software crashes. How can I fix the problem?

    Migrating, transferring or copying is DEMANDING trouble, not just asking for it.
    Always install from scratch, from the original media,

  • Cannot start a new paragraph by hitting 'enter'

    There is a strange misbehaviour with my freshly installed InDesign.
    I cannot start a new paragraph as I type. I have tried all the keyboard combinations (fn\ctrl\shift+enter) but it doesn't work.
    I have vista.
    Any ideas what's wrong? Please help!

    finiftevaya wrote:
    thanks but this is not quite this.
    the mouse works ok. problem is in the keybord
    by the way, none of the shortcuts are working at all.
    how can i assign basic shortcuts automatically?
    and this insensitivity to 'enter' drives me mad)
    If you're on a laptop and are using the Enter/Return key on the number pad, this might be the problem. Search Google for terms like "InDesign enter key not working" without quotes for good references, even if you're not on a laptop.
    [EDIT] Also Search Google for terms like "InDesign editing shortcuts" without quotes, for references on customizing shortcuts.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices
    Message was edited by: peter at knowhowpro

Maybe you are looking for

  • Transferring Album Art from a Mac to a PC

    I have iTunes on both my Mac and Windows PC- with the same library on both. I used Curator which found all my missing album art - it only works on the Mac. After spending a day doing this I tried copying the Album Art folder from my Mac to my Windows

  • Error while running leave request Workitem from UWL

    HI, While running the workitem from UWL in MSS we are getting the following error URL http://sapdev.rediffsap.net:8000/webdynpro/dispatcher/sap.com/ess~lea/LeaveRequestApprover call was terminated because the corresponding service is not available i.

  • Blackberry Accessibility, features and functions

    Recommendations: The Blackberry Screen Reader setting "silent on call" should either be expanded to include when the blackberry Assistant is operational or a separate switch should be provided to avoid conflicts. There should be a way to mute the scr

  • Website and app launch

    just launched awebsite and iphone web app the adress is  www.gcminteracive.com on the site you can also dowload the iphone app.

  • How to backup iphone version 4.1.2

    how to backup iphone version 4.1.2 using itunes