Cannot start Hyper-V virtual machine

Hi,
I have a Windows 2008 Server. It has been now upgraded to Windows 2012. Everything was working fine. But, now I turned off the virtual machine and copied the VHD file to another drive for backup. After this, I am not able to start the old virtual machine.
(The VHDs are in place. I only copied them) However, two another virtual machines are running now without any problem. While trying to start, I am getting the error "the operation cannot be performed while the object is in its current state". These are
critical server. Any quick thoughts?
Thanks
Tom Jacob

Hi,
If possible please restart the Hyper-V host server, then check whether still has such issue.
If issue still there, launch Event Viewer, check Hyper-V related logs. Post the logs for further troubleshooting.
And I notice you mentioned turned off the virtual machine, do you mean the VM running well in the past? (I mean after you upgrade server to Windows server 2012)
Can you export the VM now? Export it then delete the VM from Hyper-V, import the VM again and check the result.
For more information please refer to following MS articles:
Hyper-V: Can’t delete Virtual Machine with ‘Opertion cannot be performed while the object in current state’
http://blogs.technet.com/b/chrad/archive/2010/06/24/hyper-v-can-t-delete-virtual-machine-with-opertion-cannot-be-performed-while-the-object-in-current-state.aspx
Operation is not valid due to the current state of the object
http://social.technet.microsoft.com/Forums/en-NZ/ilm2/thread/0646a166-67b1-4322-ba9a-77e3e3ced31d
Lawrence
TechNet Community Support

Similar Messages

Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

Windows 10 Technical Preview - There is NO "Hyper-v Virtual Machine Management" service???

hi all,
There's no such Windows Topic as "WTP Virtualization", so I post this thread here, a somewhat "VIRTULIZATION" related.
I installed WTP (not server) x64 enterprise 9879, and added "Hyper-v Management" feature (management only, without Hyper-v core) in Control Panel. Then I found that there was no "Hyper-v
Virtual Machine Management" in Services panel, and there was no such file "c:\windows\system32\vmms.exe". Therefore I cannot connect to Windows Server 2012 R2 Hyper-v through WTP Hyper-v Manager.
I confirm the reason is what I state above. Firewall rules are properly configured on both Hyper-v server and WTP. I also used hvxxxx.wsf to configre anondcom to be "allow". When
I connect WS 2012 R2 through WTP, Hyper-v manager on WTP says "Please confirm VMMS server is running".
Is it a bug, or lack of implementation, or restriction of preview edition?
Any suggestion is appreciated! Thanks!

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

Installation fails with "Cannot launch the Java Virtual Machine"

I'm trying to install OAS 10.1.3.1. on Windows XPbut after copying all the files the installer starts complaining that it cannot lauch the Java Virtual Machine. Eventually, the process gets to the configuration step where it succeeds with one configuration, then fails with the next, and then finally goes into an eternal loop.
When launching the installer it claims that my environment successfully passes all test for memory size, etc.
Is this a known problem? Is there any way I can get more info about the reason why the JVM could not get lauched? I searched for information in the logs without success. I also tried to play around with the PATH environment variable since I saw some installation note saying that includingthe jre/bin path here could help, but it did not help.
Could anyone, please, give me a hint of how to complete the installation successfully?

Thanks for the hint.
I had a look in the INI-file of my BPEL installation and this is what it said about memory:
JRE_MEMORY_OPTIONS=" -mx256m"
Still, if I start the BPEL server it finally comes up after issuing a lot of complaints but as soon as I request a page I get this:
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Fel vid kompilering:C:\product\10.1.3.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\application-deployments\orabpel\console_war\persistence\_pages\\_login.java
Could not create the Java virtual machine.
Error occurred during initialization of VM
Could not reserve enough space for object heapThis is strange since at the time there is >1.4 GB of virtual memory and 0.9 GB of physical memory available.
And according to the task manager:
Commit charge limit = 2728684
Physical memory total = 2096496
I am using Windows XP Professional, version 2002, service pack 2.

Cant create replica and Hyper V virtual machine management service slow shutting down

Hi,
I cant create replica and Hyper V, I go through the process and all looks good it even starts to create the hard disk but it stops at 4096K and the wizard just keeps going.
The management console is also slow or wont load virtual machines - stuck on loading virtual machines
The Hyper V virtual machine management service slow shutting down over 30 minutes on re boot of Hyper V core 2012 R2
Any ideas ?

Hi Sir,
I assume that you have a standalone hyper-v server 2012R2 and you are using hyper-v manager to manage the hyper-v host .
Which system you are using to manage hyper-v host , win8 or win8.1 or other ?
Have you created VMs on the HOST ?
I would suggest you to create vhd or someother operation on hyper-v host directly to check the result .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hyper-V virtual machines disappearing

Running W10 Enterprise TP with no security software, nothing fancy.
Twice now my Virtual Machine running locally in Hyper-V Manger have disappeared after a reboot. They are still running in the background by their VHDs being in use, but I can't see them to do anything.
Last time this happened, I had to remove Hyper-V, reboot, re-add Hyper-V, and the VM appeared. However, there was something wrong with the VM so I deleted it and started over.
Any ideas?
My idea of a party is a virtualization server and a room of TechNet DVDs

@ThrashZone, Thank you but this is an issue that occurs after it has already been up and running.
@h_vHE I'm running Windows 10. Interesting: Everything has disappeared from C:\Users\Public\Documents\Hyper-V\. However, the virtual machine "IMAGEBASE" appears in C:\ProgramData\Microsoft\Windows\Hyper-V\. Here's a dir /b /s:
C:\ProgramData\Microsoft\Windows\Hyper-V\data.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE
C:\ProgramData\Microsoft\Windows\Hyper-V\Persistent Tasks
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Snapshots
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Snapshots Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Virtual Machines
C:\ProgramData\Microsoft\Windows\Hyper-V\Planned Virtual Machines Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshots
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshots Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\UndoLog Configuration
C:\ProgramData\Microsoft\Windows\Hyper-V\UndoLog Configuration Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines Cache
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Groups Cache\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Hard Disks
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Hard Disks\IMAGEBASE.vhdx
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\IMAGEBASE\Virtual Machines\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54.VMRS
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\06FF76FA-2D58-4BAF-9F8D-455773824F37.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\118C3BE5-0D31-4804-85F0-5C6074ABEA8F.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\146C56A0-3546-469B-9737-FCBCF82428F4.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\19839BFF-6F04-4B24-B4B5-1AFCCBE729DE.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\353B3BE8-310C-4CF4-839E-4E1B14616136.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\4764334E-E001-4176-82EE-5594EC9B530E.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\4EA4F71F-16E6-4250-99A8-A2315332CC64.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\6A45335D-4C3A-44B7-B61F-C9808BBDF8ED.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\70BB60D2-A9D3-46AA-B654-3DE53004B4F8.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\72027ECE-E44A-446E-AF2B-8D8C4B8A2279.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\78AA0C27-B2BD-45BA-83D1-5F2A8C4C6656.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\7951A5ED-8DC5-42D7-AA8C-9F14C54CEB84.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\B637F347-6A0E-4DEC-AF52-BD70CB80A21D.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\BDE5D4D6-E450-46D2-B925-976CA3E989B4.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\D45268DA-37C5-44DA-B827-B0C55CCB3BDC.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\D92D268E-9AA8-49DD-8C7D-821CEFB5F597.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\DACDCF3F-6F67-4EB8-A4D0-5D93B48A2468.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\ED28BF6C-B698-4513-B8F4-7BDD01E006A2.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Resource Types\F6293891-F32F-4930-B2DB-1A8961D9CB75.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Snapshot Groups Cache\groupregistry.vmcx
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines Cache\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54
C:\ProgramData\Microsoft\Windows\Hyper-V\Virtual Machines Cache\DC334ED4-B8DF-4EFB-A6F0-10C508E7BA54.vmcx
My idea of a party is a virtualization server and a room of TechNet DVDs

Create Hyper-V Virtual Machines with Windows PowerShell searching on hostname

Dear,
I’m a starter with PowerShell scripting an I’m looking for a script to create Hyper-V Virtual Machines with Windows PowerShell. The idea behind the script is that when I run the script its first searching for the hostname. I’m migrating 24 locations and each
location have a different hostname like xxx-SRV001. The script needs to use the first 3 signs from the hostname in this case “xxx” and create 2 VM's with below info:
Virtual Machine 1 2048MB
Virtual Machine 2 4096MB
Location D:\VM\
I can create VM's with Powershell into Hyper-V so only a script to first searching for the first 3 characters of the hostname is enough.
Example:
It's the intention that when the script runs it's looking for the hostname. As example we have hostname 000-SRV001
If the script see the first 3 characters of the hostname, in this case 000 he need to create 2 VMs with name xxx-SRV002 and xxx-SRV004
I think it must be something with
$hostname = "Get-WmiObject -computername $Machine Win32_Computersystem"
But then when i'm asking for $hostname he must give me back the hostname and if the hostname is 1 of the 24 locations then he need to create 2 vm's in Hyper-V with above info.
Can you help me or do you have a script for this?

Juste use :
$vram = 1GB*$vRam
You not need the "
Do you have any error with the creation of the VM?
# Variables
$VMName = Import-Csv "C:\HyperV\input.csv"
$VHD = 40GB
$VMLOC = "C:\HyperV"
$vSwitch = "External"
$ISO = "C:\ISO\WinServer2012R2.iso"
$LocationCode = $env:COMPUTERNAME.Split("-")[0]
# Create VM Folder
MD $VMLOC -ErrorAction SilentlyContinue
Foreach ($VM in $VMNames)
$Name = $VM.name
[int64]$vRam = $vm.vram
$vram = 1GB*$vRam
$VMName = $LocationCode+$Name
# Create Virtual Machine
New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VMLOC\$VMName\Virtual Harddisks\$VMName.vhdx" -NewVHDSizeBytes $VHD -SwitchName $vSwitch
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
Error message
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand

Hyper V virtual machine randomly loses network connectivity

I have an extremely odd issue happening on one of my Hyper-V virtual machines. For no apparent reason and completely sporadically my virtual machine will lose all network connectivity. It is a linux Vyatta firewall image. Digging through
the logs shows nothing at all when the machine actually goes offline, but when the machine starts back up I just get a Warning stating the network driver on my virtual machine loaded but has a different version from the server. Server Version 3.2 Client
version 0.2
I've ran the integrated services setup disk and nothing has fixed this. When the VM loses connectivity it is for no apparent reason, sometimes at 1am sometimes at noon, just happens. The only solution is to reboot the VM to bring it back online.
Has anyone else seen this or know of a fix for it? Its starting to slowly drive me insane!
Hyper V Server - Windows Server 2008 R2 - Hyper V Manager Version 6.1.7601.17514
VM - Linux Vyatta Core 6.3

I tried downloading new integrated services disk setup for linux, but Vyatta wouldn't work with it so I was kind of stuck there. And not sure where you are talking about changing NIC to legacy at. I did disable some TCP chimpney settings as
per an article I found, but not sure if it will fix it or not. Sometimes the machine will stay on for a month before losing network connection and sometimes it comes in spurts and happens like 3-4 times over a couple days. Its really odd

Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>16000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
    <EventRecordID>58</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <ErrorMessage>%%2147944126</ErrorMessage>
      <ErrorCode>0x800706BE</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16010
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
    <EventID>16010</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
    <EventRecordID>59</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
    <ErrorCode>15005</ErrorCode>
    <DataItemName>Parameter0</DataItemName>
    <EventPayload>
    </EventPayload>
</ProcessingErrorData>
</Event>

Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to find out whether a program is running in Hyper-V virtual machine or not?

If I want to make a program which only running in Hyper-V virtual machine, how can I find out whether
the program is running in Hyper-V virtual machine or not?

https://gallery.technet.microsoft.com/scriptcenter/Determine-if-a-computer-is-cdd20473
http://social.technet.microsoft.com/wiki/contents/articles/942.hyper-v-how-to-detect-if-a-computer-is-a-vm-using-script.aspx
http://www.grouppolicy.biz/2014/01/how-to-target-group-policy-to-virtual-computers/
Mike Crowley | MVP
My Blog --
Baseline Technologies

JAVA Importer: ORA-105100 can't start the java virtual machine

Hi,
i am having trouble to make a work interaction between forms and java.
My PL/SQL code is calling a java code situated in an imported class.
the error i get says : can't start the java virtual machine
I modified the CLASSPATH to add some jar files.
What else should i do ?
should i modify LIBPATH ?
any idea ?
Thanks
Dan

i just found this documentation Oracle Forms Developer and Forms Server 6i (Patch 4) at this adress
http://download.oracle.com/otn_hosted_doc/forms/forms/p4_relnotef.pdf
which says that i need jdk 1.2.2 to make it work but the documentation was published in 2001...
Is there an earlier doc ? or an earlier doc of the java importer ?
http://www.oracle.com/technology/products/forms/pdf/javaimporter.pdf
any help would be appreciated

Hyper v virtual Machines should have installed integrated services or not ?

Hi
In my prodcution found hyper v virtual machines have no integrated services was installed should we installed on production servers is any impact if we didnt installed them.
if it should installed then what is the best approch to installed.
Thanks

You posted in the Group Policy forum...
That's a good question for the Hyper-V forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Hyper-v virtual machine management in status stopping

Hello,
I had a problem with one vm showing status backing up.
I read on TechNet that restarting the hyper-v virtual machine management service would solve the problem.
I have tried to shutdown the service but it now says status stopping...
How long time does it take to shutdown the service? Is there anything I can do to hurry it up?
ps. I have production vm running on the host that I can't take down...
Regards
Roger

Hi Roger,
I also tested in my lab to disable that service forcibly ,then I found that it will leads the VMs to unexpected shutdown .
Based on this ,it seems that restarting the host is necessary .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to connect USB external Harddisk to Hyper-v virtual machine

Hi,
We are running hyper-v server 2008 R2, we have external USB harddisk connected in hyper-v Manager, we are not able connect this USB to virtual machine.. is this option is available in hyper-v? if no is there any document from microsoft stating the same?
Regards
Asha

Hi,
Unfortunately, USB is not supported on a Hyper-V virtual machine. You can perform the following suggestions:
1. Offline the USB hard disk on the Hyper-V host machine and connect it to the virtual machine as a pass-through disk(if the USB hard disk is support)
For more information, you can refer to:
Configuring Pass-through Disks in Hyper-V
http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-in-hyper-v.aspx
2. You can also use some USB over Ethernet application.
Best Regards,
Vincent Hu

Hyper-V Virtual machine disappeared

Hello,
I am running Windows Server 2008 R2 SP1. I have the Hyper-V role installed with to virtual machines. I rebooted yesterday after windows updates loaded and now one of my virtual machine have disappeared. I have run through hours of technet
forums trying to find the answer and have come up empty.
I checked ProgramData\Microsoft\Windows|Hyper-V\Virtual Machines and the symbolic link is gone. I tried to recreat it using the mklink command, but every time I recreate the symbolic link to the .xml it comes back as a link to a file folder.
I checked the acl on the virtual machine .xml on my D: drive and the GUID SID is missing. I also tried to add it back via the iacls command but it doesn't seem to exist.
After all that, I decided to recreate the entire virtual machine, but now I can't create virtual machines. I get teh following error:
"Failed to create external configuration store at 'folder path': A required privilege is not held by the client. (Virtual machine ID 0x80070522)"
After that error I opend azman.msc and verified that the initalstore.xml has the administrators group in it.
I do not know what else I can do from here. Any help would be appreciated.

Hi Jumar2,
This will help others who are fighting with similar issues.
Thanks for your sharing .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot start Hyper-V virtual machine

Similar Messages

Maybe you are looking for