Cannot start J2EE after connecting LDAP
I have just tried to connect my LDAP to the portal (EP6 SR1) and cannot get the J2EE to start....it goes yellow in the MMC but never green.
jcontrol.exe says "some processes running".
Any one else had this problem.
Patrick
you might configured your LDAP with wrong information
check your MMC. open the "process taple"
you will find "Dispature, Server0 and SDM"
if "Server0" is stoped then
open configtool then "UME LDAP Data" and remove your LDAP configuration, then save changes
restart your server and it should work FINE.
Similar Messages
-
Error starting J2EE after EP installation
Hi,
I'm trying to install EP 6.0 SP9 in WAS 6.40 SP9 on Linux PowerPC. WAS is an standalone instance (only JAVA part).
The installation is aborted in the J2EE Start step (the step before the latest step). After that I cannot start J2EE Engine anymore, because the process jlaunch dies suddently, and on logs this error is shown:
ERROR => JHVM_LoadJavaVM: Cannot create Java VM (rc=-6) [jhvmxx_mt.c 480]
ERROR => Cannot load Java VM (<default>) (rc=-1) [jlnchxxi_mt 591]
SigISetIgnoreAction: SIG_IGN for signal 17
JLaunchCloseProgram: good bye (exitcode=-1)
What should I do?
Thanks in advance,
ArnauHi Arnau,
I would suggest to check the Java VM parameters. You can look for a section "Adapt Memory Configuration for the J2EE Server" in the installation guide or the SAP notes mentioned in the guide dealing with the Java VM parameters (like 723909 and 716927).
This thread might also be of help to solve your problem: https://forums.sdn.sap.com/thread.jspa?threadID=66611
Hope this helps,
Robert
PS: Please consider following the <a href="https://forums.sdn.sap.com/thread.jspa?threadID=117168&tstart=0">Rules of Engagement</a> as mention by Craig Cmehil. It's polite to come back to your <a href="https://forums.sdn.sap.com/thread.jspa?threadID=129275">own threads</a> and mark the thread as solved or assign points and give feedback to the answers so that other readers can learn how to solve the issue that you have experienced. Thanks a lot! -
I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
I am also providing you with a screenshot of what appears! I need photos on my iPad2
Message was edited by: anganaYou don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it. -
Kded crashes on amarok quit in gnome, cannot start jack after
I'm running amarok in gnome and it works fine except that I'm getting the KDE crash handler telling me that kded has cashed just after I quit amarok. And amarok seems to keep holding onto hw:0, so I cannot start jack after. Which prosess could I kill to make jack start?
ThanksZestyTang:
If you import the modified folder you'll just end up with duplicates as the ratings and other metadata will be lost. It's starting over from scratch.
alexkess:
Since it works OK in the other account it might be a preference file other than iPhoto's. Try the following:
Trouble Shooting Preferences in Leopard
1 - Create a folder titled "Preferences A" on the Desktop.
2 - Open the working Preferences folder, HD/Users/your_name/Library/Preferences, and move the contents to the Preferences A folder on the Desktop.
3 - Make a duplicate copy of the Preferences A folder on the Desktop as a precautionary backup.
4 - With the working Preferences folder empty run the application again and determine if the problems is fixed.
NOTE: you may have to drag the contents of the working folder to the trash and empty if moving the contents to the A folder only copies them instead of moving.
5 - If the problem is fixed:
A - open the working Preferences folder (HD/Users/your_name/Library/Preferences).
B - Open the Preferences A folder on the Desktop, select all of the contents and drag them into the working Preferences folder.
C - When the Copy window pops up check the "Apply to All" check box and then click on the Don't Replace button as seen here.
6 - If the problem is NOT fixed, empty the working Preferencess folder and move the contents of the Preferences folder on the desktop back into it.
OT -
Cannot start FIMSynchronizationService after applying ServicePack for SharePoint 2013 Server
Dear all,
Yesterday we have applied SP1 for SharePoint 2013 on our SharePoint Farm (1 one server + 1 db server). Unfortunately the FIMSynchronizationService (Forefront Identity Manager Synchronization Service) will not start anymore after applying the SP.
The SharePoint Services: User Profile Synchronisation Service and User Profile Service are started in Central Admin (can started /stopped without problems). Only the Windows Services FIMSynchronizationService cannot be started anymore.
What can be the cause of this problem?
The following application event is visible in the Event Viewer:
ID 6324
The server encountered an unexpected error and stopped.
"BAIL: MMS(1856): sql.cpp(8490): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): sql.cpp(8533): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): server.cpp(260): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): server.cpp(3860): 0x80231334 (The sql connection string has unsupported values.)
BAIL: MMS(1856): service.cpp(1539): 0x80231334 (The sql connection string has unsupported values.)
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2145184972. This is retry number 0.
BAIL: MMS(1856): clrhost.cpp(283): 0x80131022
BAIL: MMS(1856): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(1856): server.cpp(251): 0x80131022
BAIL: MMS(1856): server.cpp(3860): 0x80131022
BAIL: MMS(1856): service.cpp(1539): 0x80131022
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 1.
BAIL: MMS(1856): clrhost.cpp(283): 0x80131022
BAIL: MMS(1856): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(1856): server.cpp(251): 0x80131022
BAIL: MMS(1856): server.cpp(3860): 0x80131022
BAIL: MMS(1856): service.cpp(1539): 0x80131022
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 2.
BAIL: MMS(1856): clrhost.cpp(283): 0x80131022
BAIL: MMS(1856): scriptmanagerimpl.cpp(7670): 0x80131022
BAIL: MMS(1856): server.cpp(251): 0x80131022
BAIL: MMS(1856): server.cpp(3860): 0x80131022
BAIL: MMS(1856): service.cpp(1539): 0x80131022
ERR: MMS(1856): service.cpp(988): Error creating com objects. Error code: -2146234334. This is retry number 3.
BAIL: MMS(1856): service.cpp(1002): 0x80131022
Forefront Identity Manager 4.0.24501. Try to reboot server and run PSCONFIG wizard.
2. Check if permission of sync account has not changes (SPECIALLY Replicate directory change )permission on AD or local computer
3. what account are you logged in with.
If possible provide ULS log details
If this helped you resolve your issue, please mark it Answered
Hello, thanks for your reply,
We have done the following:
1. rebooted server
2. run psconfig: Psconfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -c
installfeatures
3. result: complaining about webconfig.accsrv.xml (removed this and tried again, then complaining about other web.config file)
9/24/2014 19:05:14 9 ERR Task applicationcontent has failed with an unknown exception
09/24/2014 19:05:14 9 ERR Exception: System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML
heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ExceptionInfo for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ExceptionInfo is Er is een uitzondering van het type {0} opgetreden. Aanvullende informatie over de uitzondering:
{1}
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ExceptionInfo for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ExceptionInfo is Er is een uitzondering van het type {0} opgetreden. Aanvullende informatie over
de uitzondering: {1}
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 ERR Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie over de uitzondering: Het webconfiguratiebestand C:\Program
Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is
ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 INF Entering function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ExceptionInfo for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ExceptionInfo is Er is een uitzondering van het type {0} opgetreden. Aanvullende informatie over
de uitzondering: {1}
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionMessage
09/24/2014 19:05:14 9 INF Leaving function Common.BuildExceptionInformation
09/24/2014 19:05:14 9 INF Entering function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key global
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found command global in collection
09/24/2014 19:05:14 9 INF Leaving function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key initialize
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found command initialize in collection
09/24/2014 19:05:14 9 INF Leaving function get CommandCollection.this[string key]
09/24/2014 19:05:14 9 INF Entering function Command.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key SINGLESERVER
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found parameter SINGLESERVER in collection
09/24/2014 19:05:14 9 INF Leaving function Command.this[string key]
09/24/2014 19:05:14 9 INF Entering function Command.this[string key]
09/24/2014 19:05:14 9 INF Entering function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found value in collection for key upgradesessionid
09/24/2014 19:05:14 9 INF Leaving function CommandCollectionBase.Get
09/24/2014 19:05:14 9 INF Found parameter upgradesessionid in collection
09/24/2014 19:05:14 9 INF Leaving function Command.this[string key]
09/24/2014 19:05:14 9 INF Releasing the farm upgrade lock in common exception handler.
09/24/2014 19:05:14 9 INF Entering function TaskBase.OnTaskStop
09/24/2014 19:05:14 9 INF Creating the OnTaskStop event for task applicationcontent
09/24/2014 19:05:14 9 ERR Task applicationcontent has failed
09/24/2014 19:05:14 9 INF friendlyMessage for task applicationcontent is Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie
over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
09/24/2014 19:05:14 9 INF debugMessage for task applicationcontent is Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie
over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is
ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 9 INF Entering function TaskBase.FireTaskStateChanged
09/24/2014 19:05:14 9 INF Firing the OnTaskStateChanged event for task applicationcontent
09/24/2014 19:05:14 9 INF Entering function TaskDriver.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ApplicationContentTaskDisplayName for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ApplicationContentTaskDisplayName is bestanden met inhoud voor toepassingen installeren
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Received an TaskStateEventHandler event. task:applicationcontent TaskBase.State:stopped
09/24/2014 19:05:14 9 INF Entering function TasksQueue.IncrementTaskFailed
09/24/2014 19:05:14 9 INF Incremented the number of tasks failed to 1
09/24/2014 19:05:14 9 INF Leaving function TasksQueue.IncrementTaskFailed
09/24/2014 19:05:14 9 INF Task applicationcontent has stopped and failed. Total failed is now 1
09/24/2014 19:05:14 9 INF Leaving function TaskDriver.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Entering function CommandLine.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Received an TaskStateEventHandler event. task:applicationcontent TaskBase.State:stopped
09/24/2014 19:05:14 9 INF Task applicationcontent has stopped and failed. Total failed is now 1
09/24/2014 19:05:14 9 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Resource id to be retrieved is ApplicationContentTaskFailConfigDisplayLabel for language Dutch (Netherlands)
09/24/2014 19:05:14 9 INF Resource retrieved id ApplicationContentTaskFailConfigDisplayLabel is Kan de bestanden met inhoud voor toepassingen
niet installeren.
09/24/2014 19:05:14 9 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 9 INF Last message from task applicationcontent is Er is een uitzondering van het type System.IO.InvalidDataException opgetreden.
Aanvullende informatie over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of
dit element is ongeldig.
09/24/2014 19:05:14 9 INF Leaving function CommandLine.TaskStateEventHandler
09/24/2014 19:05:14 9 INF Leaving function TaskBase.FireTaskStateChanged
09/24/2014 19:05:14 9 INF Leaving function TaskBase.OnTaskStop
09/24/2014 19:05:14 9 INF Leaving function TaskThread.ExecuteTask
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is ApplicationContentTaskDisplayName for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id ApplicationContentTaskDisplayName is bestanden met inhoud voor toepassingen installeren
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 ERR Task bestanden met inhoud voor toepassingen installeren failed, so stopping execution of the engine
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is ApplicationContentTaskFailConfigDisplayLabel for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id ApplicationContentTaskFailConfigDisplayLabel is Kan de bestanden met inhoud voor toepassingen niet installeren.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 ERR Kan de bestanden met inhoud voor toepassingen niet installeren.
Er is een uitzondering van het type System.IO.InvalidDataException opgetreden. Aanvullende informatie over de uitzondering: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft
geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is ongeldig.
System.IO.InvalidDataException: Het webconfiguratiebestand C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\WEBCONFIG.ACCSRV.XML heeft geen element configuration/configSections/sectionGroup[@name='SharePoint'] of dit element is
ongeldig.
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.CheckMergedActionsConfiguration(XmlDocument xd, String sourceFileName, Boolean createMergedActionsConfiguration)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
09/24/2014 19:05:14 1 INF Entering function TaskDriver.NotifyTaskSummary
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is TotalTasksRan for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id TotalTasksRan is Totaal aantal uitgevoerde configuratie-instellingen: {0}
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalran, TaskDriverEventArgs.EventType.notify,
message: Totaal aantal uitgevoerde configuratie-instellingen: 4
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Totaal aantal uitgevoerde configuratie-instellingen: 4
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is TotalTasksSucceeded for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id TotalTasksSucceeded is Totaal aantal geslaagde configuratie-instellingen: {0}
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalsuccess, TaskDriverEventArgs.EventType.notify,
message: Totaal aantal geslaagde configuratie-instellingen: 3
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Totaal aantal geslaagde configuratie-instellingen: 3
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is TotalTasksFailed for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id TotalTasksFailed is Totaal aantal mislukte configuratie-instellingen: {0}
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Sending a task driver notify event: TaskDriverEventArgs.EventCriticalityType: info, TaskDriverEventArgs.EventMessageType: totalfail, TaskDriverEventArgs.EventType.notify,
message: Totaal aantal mislukte configuratie-instellingen: 2
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType notify,
message Totaal aantal mislukte configuratie-instellingen: 2
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverNotify
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.NotifyTaskSummary
09/24/2014 19:05:14 1 ERR One or more configuration tasks has failed or some tasks were not run
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is PostSetupConfigurationStoppingSucceeded for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id PostSetupConfigurationStoppingSucceeded is De configuratie van SharePoint-producten is gestopt.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverStopping
09/24/2014 19:05:14 1 INF Sending a task driver stopping event: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType.stopping, De configuratie van SharePoint-producten
is gestopt.
09/24/2014 19:05:14 1 INF Entering function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Acquiring the writer lock to change the state
09/24/2014 19:05:14 1 INF Current state of the task driver is neverrun. You want to change it to stoppingrun
09/24/2014 19:05:14 1 INF Changed state of the task driver to neverrun
09/24/2014 19:05:14 1 INF Released the writer lock to change the state
09/24/2014 19:05:14 1 INF Leaving function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType info, TaskDriverEventArgs.EventType stopping, message
De configuratie van SharePoint-producten is gestopt.
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverStopping
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.ExecuteTasks
09/24/2014 19:05:14 1 ERR One or more configuration tasks has failed to execute
09/24/2014 19:05:14 1 INF Entering function TaskDriver.Stop
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id PostSetupConfigurationFailedEventLog is De configuratie van SharePoint-producten is mislukt. Voor een goede werking moet u de configuratie
opnieuw uitvoeren. Als u een juiste diagnose wilt stellen van dit probleem, kunt u de gedetailleerde foutinformatie op {0} raadplegen, het probleem oplossen en de configuratiewizard opnieuw uitvoeren.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 ERR De configuratie van SharePoint-producten is mislukt. Voor een goede werking moet u de configuratie opnieuw uitvoeren. Als u een juiste diagnose wilt stellen van dit
probleem, kunt u de gedetailleerde foutinformatie op C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\PSCDiagnostics_9_24_2014_19_4_25_376_763845942.log raadplegen, het probleem oplossen en de configuratiewizard opnieuw uitvoeren.
09/24/2014 19:05:14 1 INF Entering function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Resource id to be retrieved is PostSetupConfigurationFailedUserMessage for language Dutch (Netherlands)
09/24/2014 19:05:14 1 INF Resource retrieved id PostSetupConfigurationFailedUserMessage is De configuratie van SharePoint-producten is mislukt. U moet de configuratie opnieuw uitvoeren
voordat u de SharePoint-producten kunt gebruiken. Zie het diagnostisch logboek op {0} en het gebeurtenislogboek van de toepassing voor meer informatie.
09/24/2014 19:05:14 1 INF Leaving function StringResourceManager.GetResourceString
09/24/2014 19:05:14 1 INF Entering function TaskDriver.OnTaskDriverStop
09/24/2014 19:05:14 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop, De configuratie van SharePoint-producten
is mislukt. U moet de configuratie opnieuw uitvoeren voordat u de SharePoint-producten kunt gebruiken. Zie het diagnostisch logboek op C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\PSCDiagnostics_9_24_2014_19_4_25_376_763845942.log
en het gebeurtenislogboek van de toepassing voor meer informatie.
09/24/2014 19:05:14 1 INF Entering function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Acquiring the writer lock to change the state
09/24/2014 19:05:14 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
09/24/2014 19:05:14 1 INF Changed state of the task driver to neverrun
09/24/2014 19:05:14 1 INF Released the writer lock to change the state
09/24/2014 19:05:14 1 INF Leaving function TaskDriverStateChange.Enter
09/24/2014 19:05:14 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Entering function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message De
configuratie van SharePoint-producten is mislukt. U moet de configuratie opnieuw uitvoeren voordat u de SharePoint-producten kunt gebruiken. Zie het diagnostisch logboek op C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS\PSCDiagnostics_9_24_2014_19_4_25_376_763845942.log
en het gebeurtenislogboek van de toepassing voor meer informatie.
09/24/2014 19:05:14 1 INF Leaving function CommandLine.TaskDriverEventHandler
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.OnTaskDriverStop
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.Stop
09/24/2014 19:05:14 1 INF UnLocking the task driver for exclusive use while we ran tasks
09/24/2014 19:05:14 1 INF Leaving function TaskDriver.Run
09/24/2014 19:05:14 1 ERR Post setup configuration was not run successfully when using the command line task driver module
09/24/2014 19:05:14 1 INF Leaving function PsconfigCommandLineMain.Main
No idea what to do? -
After connecting the imac to a new router the system hung completely up. After each input, e.g. opening preview or a browser, the coloured turning disc appeared and nothing happened anymore. Several restarts, also in safe mode, were unsuccessful. I could not switch to another user. Restart is only possible at all from installation disc but thereafter problem remains the same.
What can I do?And, what happens if you disconnect the computer from the new router? Are you able to do this, and what happens when you try it?
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
Cannot Start SI4 After New License
I have a test drive version of NW 4 running on Suse 9.2 Linux and db2. It ran fine for 3 months. Yesterday I installed a new license because the old one expired. I installed it as root while the db was running.
This morning, I cannot start sap, because the database won't start.
The following is the output of R3trans. Can anyone give me any suggestions on things to try to resolve it?
4 ETW000 R3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.10.2005 - 07:08:07
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d -w xx.log
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Oct 30 07:08:07 2005 148 0.000148
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000175
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 59 0.000234
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' ...
4 ETW000 57 0.000291
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/SI4/SYS/exe/run/dbdb6slib.so), hdl 0
4 ETW000 21464 0.021755
4 ETW000 [dev trc ,00000] Library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' loaded
4 ETW000 59 0.021814
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 59 0.021873
4 ETW000 [dev trc ,00000] Version of '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' is "640.00", patchlevel (0.7)
4 ETW000 137 0.022010
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 40 0.022050
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 40 0.022090
4 ETW000 [dev trc ,00000] New connection 0 created 35 0.022125
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 45 0.022170
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.022201
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 37 0.022238
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.022277
4 ETW000 [dev trc ,00000] RLIMIT_STACK: current=-1, max=-1 296 0.022573
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) database interface 640.00 [opt] 31 0.022604
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 27 0.022631
4 ETW000 [dev trc ,00000] (0.6) DB6: Schema setting for remote monitoring (note 711477)
4 ETW000 36 0.022667
4 ETW000 [dev trc ,00000] (0.7) DB6: support DB6_DB_TYPE=DB2/400 (note 663756)
4 ETW000 35 0.022702
4 ETW000 [dev trc ,00000] (0.7) DB6: CTE on UNICODE (note 717357) 23 0.022725
4 ETW000 [dev trc ,00000] Supported features: 22 0.022747
4 ETW000 [dev trc ,00000] - smart optlevel handling (non-UR, FAE) 32 0.022779
4 ETW000 [dev trc ,00000] - SQLExtendedBind for LOBs and Unicode (V8 or higher)
4 ETW000 38 0.022817
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 87 0.022904
4 ETW000 [dev trc ,00000] ..done 136 0.023040
4 ETW000 [dev trc ,00000] Sun Oct 30 07:08:08 2005 97739 0.120779
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (BEGIN) 67 0.120846
4 ETW000 [dev trc ,00000] &+*** DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1032N No start database manager command was issued. SQLSTATE=
4 ETW000 46 0.120892
4 ETW000 [dev trc ,00000] &+*** 57019
4 ETW000 37 0.120929
4 ETW000 [dev trc ,00000] &+***
4 ETW000 36 0.120965
4 ETW000 [dev trc ,00000] &+***
4 ETW000 37 0.121002
4 ETW000 [dev trc ,00000] &+*** ABAP location info '', 0
4 ETW000 49 0.121051
4 ETW000 [dev trc ,00000] &+***
4 ETW000 35 0.121086
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (END) 23 0.121109
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'SI4' as 'sapsi4' failed
4 ETW000 138 0.121247
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'SI4'"
si4host:si4adm 77>
si4host:si4adm 77> db2admin start
db2admin: Command not found.
si4host:si4adm 78> db2admin
db2admin: Command not found.
si4host:si4adm 79> db2start
10/30/2005 07:36:36 0 0 SQL8000N DB2START processing failed; a valid product license was not found.
SQL1032N No start database manager command was issued. SQLSTATE=57019Yes, startsap is the base script, which calls other scripts, R3trans and db2start.
I didn't have any luck. I did find an indication on an IBM website that the error message related to the fact that the db2 license had expired. There is a command called "db2licm" which you can run to update the db2 license, but I couldn't find a license file.
I wonder if IBM imposes it's own license expiration separate from SAP's, and that IBM require a re-install. So, I gave up and just re-installed it. Oh well, re-installing is good practice.
Sorry I couldn't help you. -
i use win xp pro, j2sdk 1.4.0, beta 2, now installed j2sdkee 1.3.1 under C:\Program Files\,
but cannot start all commands like j2ee, i got such error message:
"'C:\Program' is not recognized as an internal or external command,
operable program or batch file.
'-Dorg.xml.sax.parser' is not recognized as an internal or external command,
operable program or batch file."
please help, many thanks!thanks.
but when i re-installed j2ee under D:\j2sdkee, i still the same error message, however less, [j2se still stay in C:\Program File\]
"'C:\Program' is not recognized as an internal or external command,
operable program or batch file." -
Cannot start AdminServer after adding weblogic user to OID
Hi.
We have two OIDs: one is used in the production env, the other in dev.
I succeeded in configuring SOA-dev and OID-dev so that worklist users get authenticated against OID-dev.
Moreover I added the weblogic user to OID-dev following this guide (http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/bp_worklist.htm#insertedID2), so that weblogic can login and administer the worklist.
I repeated the steps in PROD env (for SOA-prod and OID-prod) but after adding weblogic to OID-prod I cannot start AdminServer-prod:
<Mar 10, 2011 5:31:01 PM CET> <Critical> <Security> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
<Mar 10, 2011 5:31:01 PM CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1009)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Anyway, configuring SOA-prod to use OID-dev (simply switching OID ip address) makes things work.
If I enable SSL between SOA-prod and OID-prod I can start the servers but I cannot login into the worklist. The same in DEV: enabling SSL between OID-dev and SOA-dev does not influence server boot but I cannot login into the worklist.
I think the problem is related to SSL configurtaion in OID-prod but since it's 10g there is no orclsslinteropmode to disable (required to worklistapp).
SOA is 11.1.1.2 and OID 10g.
Any suggestions?
Thanks for your precious help,
MichaelHi Anuj.
Thank you very much for you help.
My situation is a bit different: we do not want to use two OIDs at the same time.
In PROD the order of auth providers is
1. OIDAuth-prod
2. DefaultAuthenticator
whereas in DEV it is:
1. OIDAuth-dev
2. DefaultAuthenticator
Id DEV server boot and worklist login are ok.
OIDs are v10.1.2.3 but OID-prod is updated with the latest security patches (of Oct 2010). I will raise a SR.
Thanks again,
Michael -
[SOLVED] Cannot start mysqld after switching to MariaDB
Hey guys,
I just switched to MariaDB as recommended.
After installing MariaDB and running
systemctl start mysqld
, I get this error message:
Job for mysqld.service failed.
journal:
systemd[1]: Starting MariaDB database server...
mysqld[9358]: 130326 0:27:17 InnoDB: The InnoDB memory heap is disabled
mysqld[9358]: 130326 0:27:17 InnoDB: Mutexes and rw_locks use GCC atomic builtins
mysqld[9358]: 130326 0:27:17 InnoDB: Compressed tables use zlib 1.2.7
mysqld[9358]: 130326 0:27:17 InnoDB: Initializing buffer pool, size = 128.0M
mysqld[9358]: 130326 0:27:17 InnoDB: Completed initialization of buffer pool
mysqld[9358]: 130326 0:27:17 InnoDB: highest supported file format is Barracuda.
mysqld[9358]: 130326 0:27:17 InnoDB: Waiting for the background threads to start
mysqld[9358]: 130326 0:27:18 Percona XtraDB (http://www.percona.com) 5.5.30-MariaDB-30.1 started; log sequence number 46580545
mysqld[9358]: 130326 0:27:18 [ERROR] mysqld: Got error 'Size of control file is smaller than expected' when trying to use aria control file '/var/lib/mysql/aria_log_control'
mysqld[9358]: 130326 0:27:18 [ERROR] Plugin 'Aria' init function returned error.
mysqld[9358]: 130326 0:27:18 [ERROR] Plugin 'Aria' registration as a STORAGE ENGINE failed.
mysqld[9358]: 130326 0:27:18 [ERROR] Aria engine is not enabled or did not start. The Aria engine must be enabled to continue as mysqld was configured with --with-aria-tmp-tables
mysqld[9358]: 130326 0:27:18 [ERROR] Aborting
mysqld[9358]: 130326 0:27:18 InnoDB: Starting shutdown...
mysqld[9358]: 130326 0:27:19 InnoDB: Shutdown completed; log sequence number 46580545
mysqld[9358]: 130326 0:27:19 [Note] /usr/bin/mysqld: Shutdown complete
systemd[1]: mysqld.service: main process exited, code=exited, status=1/FAILURE
Last edited by lonaowna (2013-03-26 01:23:20)Hi ! I come here because I have a trouble since the last update of Mysqld :
I cannot start the daemon with
sudo systemctl start mysqld
I have these problems when i look in journalctl -xn :
mars 26 00:22:14 server mysqld[11593]: InnoDB: Error: log file ./ib_logfile0 is of different size 0 3174400 bytes
mars 26 00:22:14 server mysqld[11593]: InnoDB: than specified in the .cnf file 0 5242880 bytes!
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Plugin 'InnoDB' init function returned error.
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Unknown/unsupported storage engine: InnoDB
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [ERROR] Aborting
mars 26 00:22:14 server mysqld[11593]: 130326 0:22:14 [Note] /usr/bin/mysqld: Shutdown complete
mars 26 00:22:14 server systemd[1]: mysqld.service: main process exited, code=exited, status=1/FAILURE
When I try with mysqld, I have
130326 0:23:21 [Warning] Can't create test file /var/lib/mysql/server.lower-test
130326 0:23:21 [Warning] Can't create test file /var/lib/mysql/server.lower-test
mysqld: Can't change dir to '/var/lib/mysql/' (Errcode: 13)
130326 0:23:21 [ERROR] Aborting
130326 0:23:21 [Note] mysqld: Shutdown complete
And when I look in /var/lib/mysql/server.err I have these lines
130207 23:32:56 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
130322 00:25:27 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
130322 0:25:27 InnoDB: The InnoDB memory heap is disabled
130322 0:25:27 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130322 0:25:27 InnoDB: Compressed tables use zlib 1.2.7
130322 0:25:27 InnoDB: Initializing buffer pool, size = 128.0M
130322 0:25:27 InnoDB: Completed initialization of buffer pool
130322 0:25:27 InnoDB: highest supported file format is Barracuda.
InnoDB: Error: tried to read 65536 bytes at offset 0 3173376.
InnoDB: Was only able to read 1024.
InnoDB: Fatal error: cannot read from file. OS error number 17.
130322 0:25:30 InnoDB: Assertion failure in thread 139785666135872 in file os0file.c line 2538
InnoDB: We intentionally generate a memory trap.
InnoDB: Submit a detailed bug report to http://bugs.mysql.com.
InnoDB: If you get repeated assertion failures or crashes, even
InnoDB: immediately after the mysqld startup, there may be
InnoDB: corruption in the InnoDB tablespace. Please refer to
InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html
InnoDB: about forcing recovery.
23:25:30 UTC - mysqld got signal 6 ;
This could be because you hit a bug. It is also possible that this binary
or one of the libraries it was linked against is corrupt, improperly built,
or misconfigured. This error can also be caused by malfunctioning hardware.
We will try our best to scrape up some info that will hopefully help
diagnose the problem, but since we have already crashed,
something is definitely wrong and this may fail.
key_buffer_size=16777216
read_buffer_size=262144
max_used_connections=0
max_threads=151
thread_count=0
connection_count=0
It is possible that mysqld could use up to
key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 134074 K bytes of memory
Hope that's ok; if not, decrease some variables in the equation.
Thread pointer: 0x0
Attempting backtrace. You can use the following information to find out
where mysqld died. If you see no messages after this, something went
terribly wrong...
stack_bottom = 0 thread_stack 0x40000
/usr/bin/mysqld(my_print_stacktrace+0x29)[0x78ae99]
/usr/bin/mysqld(handle_fatal_signal+0x471)[0x67ad71]
/usr/lib/libpthread.so.0(+0xf1e0)[0x7f226299a1e0]
/usr/lib/libc.so.6(gsignal+0x35)[0x7f22615612c5]
/usr/lib/libc.so.6(abort+0x148)[0x7f2261562748]
/usr/bin/mysqld[0x8f2ac0]
/usr/bin/mysqld[0x8af1a0]
/usr/bin/mysqld[0x8e187c]
/usr/bin/mysqld[0x8e75ef]
/usr/bin/mysqld[0x834204]
/usr/bin/mysqld[0x7fe61f]
/usr/bin/mysqld(_Z24ha_initialize_handlertonP13st_plugin_int+0x41)[0x67ccf1]
/usr/bin/mysqld[0x59ad94]
/usr/bin/mysqld(_Z11plugin_initPiPPci+0xa42)[0x59f342]
/usr/bin/mysqld[0x524328]
/usr/bin/mysqld(_Z11mysqld_mainiPPc+0x447)[0x529187]
/usr/lib/libc.so.6(__libc_start_main+0xf5)[0x7f226154da15]
/usr/bin/mysqld[0x51ff89]
The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains
information that should help you find out what is causing the crash.
130322 00:25:30 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
130326 00:24:58 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
130326 0:24:58 InnoDB: The InnoDB memory heap is disabled
130326 0:24:58 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130326 0:24:58 InnoDB: Compressed tables use zlib 1.2.7
130326 0:24:58 InnoDB: Initializing buffer pool, size = 128.0M
130326 0:24:58 InnoDB: Completed initialization of buffer pool
InnoDB: Error: log file ./ib_logfile0 is of different size 0 3174400 bytes
InnoDB: than specified in the .cnf file 0 5242880 bytes!
130326 0:24:58 [ERROR] Plugin 'InnoDB' init function returned error.
130326 0:24:58 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
130326 0:24:58 [ERROR] Unknown/unsupported storage engine: InnoDB
130326 0:24:58 [ERROR] Aborting
130326 0:24:58 [Note] /usr/bin/mysqld: Shutdown complete
130326 00:24:58 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
130326 00:25:33 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql/
130326 0:25:33 InnoDB: The InnoDB memory heap is disabled
130326 0:25:33 InnoDB: Mutexes and rw_locks use GCC atomic builtins
130326 0:25:33 InnoDB: Compressed tables use zlib 1.2.7
130326 0:25:33 InnoDB: Initializing buffer pool, size = 128.0M
130326 0:25:33 InnoDB: Completed initialization of buffer pool
InnoDB: Error: log file ./ib_logfile0 is of different size 0 3174400 bytes
InnoDB: than specified in the .cnf file 0 5242880 bytes!
130326 0:25:33 [ERROR] Plugin 'InnoDB' init function returned error.
130326 0:25:33 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
130326 0:25:33 [ERROR] Unknown/unsupported storage engine: InnoDB
130326 0:25:33 [ERROR] Aborting
130326 0:25:33 [Note] /usr/bin/mysqld: Shutdown complete
130326 00:25:33 mysqld_safe mysqld from pid file /var/lib/mysql//server.pid ended
When I try mysqld_safe, here is what I get
130326 00:24:58 mysqld_safe Logging to '/var/lib/mysql/server.err'.
130326 00:24:58 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
130326 00:24:58 mysqld_safe mysqld from pid file /var/lib/mysql/server.pid ended
Resolution
===== It's a good thing to make a post :
It allows me to order my ideas and I find the solution here http://serverfault.com/questions/104014 … erent-size
I juste deleted the files /var/lib/mysqld/ib_logfile0 and /var/lib/mysql/ib_logfile1
First, I had a problem about the file who is in the future (WTF ?:p) But after, it worked !
Thanks Anyway !
Last edited by shox (2013-03-25 23:51:43) -
Hi All,
I have installed jdk1.3 and j2sdkee1.2.1 into the
respective folders. And also set the JAVA_HOME,
J2EE_HOME and J2EE_CLASSPATH in the
Environment variables.
When I try to start j2ee, it gives me a mesg
Set JAVA_HOME to the path of a valid jdk.
Please help me.
SanjayI'm no guru - but I just ran into a similar problem on Win 2000 when I tried to start j2ee - I would get a zillion start up errors. I fixed it by doing this:
Make sure you are not trying to run j2sdkee1.3.1 with jdk1.3
Go get the latest version of jdk (jdk1.3.1_02)
Make sure your java home points to the new version of jdk1.3.1_02
then try it again...
as soon as I upgraded my jdk it worked like a charm! :-)
Hope this helps.
Rebecca -
Cannot start J2EE server on Windows 2000 server
Hi..
I installed J2EE 1.3(beta) along with J2SE1.3 that comes with the Java Jump start CDs.
The installation process went fine...I configured the environment variables but when I try to start the J2EE server from command prompt I get the following error.
E:\>j2ee -verbose
Exception in thread "main" java.lang.NoClassDefFoundError: javax/naming/Context at com.sun.enterprise.server.J2EEServer.<clinit>(J2EEServer.java:59)
The same error is encountered with other switches(stop, version etc.) of j2ee.
There is no conflict of port numbers. Can anyone please guide me properly what I have done wrong in the installation process?
ThanksWell...I removed the CLASSPATH variable all together and reinstalled J2SE 1.3 again(refreshed all the environment variables) and then started j2ee server....and it worked this time...
Thanks alot... -
HELP!!! My macbook pro cannot start up after dropping!!!
I dropped my Macbook Pro 2.4 hardly to the ground on the right bottom days ago and it just cannot start up anymore now.
I can hear the start up chime, but the screen is black and it shuts down automatically.
I doubted it was because the hard drive dead, so I took out the hard drive and anticipated to see at least a folder with a question mark, but nothing - still black and powers off.
HELP!!! Anybody has any idea?Contact Apple & make an appointment to have the computer repaired. Applecare does not cover accidental damage. If you want to diagnose & repair yourself - MacFixIt Tutorials
Message was edited by: CMCSK -
Cannot Start Sqlplus after installing Oracle on linux
Hi All,
I tried installing oracle10g-10.1.0 on Fedora core 2.My installation was successful.But i'm not able to start sqlplus after my installation.I have made the necessary changes in the .bash_profile.Please do find the contents of the file and let me know what i need to do further for me to start both my sqlplus and isqlplus.when i go to the bin directory and execute sqlplus as oracle user i get the following error messages.
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory.
How can i solve this error.Your suggestions are greatly appreciated.The contents of my .bash_profile are as follows.Pls advice on the same.Thanks in advance.
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
umask 022
PATH=$PATH:$HOME/bin
unset USERNAME
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/10.1.0/Db_1
export ORACLE_SID=orcl
export PATH=$PATH:$ORACLE_HOME/bin
export PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
#/u01/app/oracle/product/10.1.0/db_1/bin
#NLS_LANG=american_america.US7ASCII
#export NLS_LANG
#ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
#export ORA_NLS33
Thanks,
RamaHi Gasparotto,
Thanks for your time and for your suggestion in helping me out to find a solution to my problem.As per your request pls do find enclosed the contents of the command env in my /home/oracle directory.Pls advice me where i have done a mistake.Your inputs are greatly appreciated.Thanks once again.
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
QTDIR=/usr/lib/qt-3.3
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/product/10.1.0/Db_1/lib
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
ORACLE_SID=orcl
ORACLE_BASE=/u01/app/oracle
KDEDIR=/usr
MAIL=/var/spool/mail/oracle
PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/bin:/etc::/bin::/home/oracle/bin:/u01/app/oracle/product/10.1.0/Db_1/bin
INPUTRC=/etc/inputrc
PWD=/home/oracle
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SHLVL=1
HOME=/home/oracle
LOGNAME=oracle
LESSOPEN=|/usr/bin/lesspipe.sh %s
DISPLAY=:0.0
ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
G_BROKEN_FILENAMES=1
XAUTHORITY=/home/oracle/.xauthzZ1FKa
_=/bin/env
Thanks,
Rama -
Cannot start compiz after upgrading catalyst to 8.12
Hi all, I just upgraded my catalyst to 8.12 from 8.11 today and found that I could not start compiz, while X works with Slim the login manager. Here is my xorg.conf, which works perfectly for 8.11:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "on"
EndSection
Section "Files"
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "record"
Load "extmod"
Load "dri"
Load "dbe"
Load "GLcore"
Load "glx"
Load "xtrap"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "AOC"
ModelName "FW913"
EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD4650"
Option "AccelMethod" "EXA"
#Option "XAANoOffscreenPixmaps" "on"
Option "AccelDFS" "on"
Option "EnablePageFlip" "on"
Option "TexturedVideo" "on"
Option "VideoOverlay" "off"
Option "OpenGLOverlay" "off"
Option "Textured2D" "on"
Option "TexturedXrender" "on"
Option "UseFastTLS" "1"
Option "BackingStore" "on"
Option "AGPMode" "4"
Option "GARTSize" "64"
Option "ColorTiling" "true"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "RENDER" "Enable"
Option "DAMAGE" "Enable"
Option "Composite" "Enable"
EndSection
For now I have to switch back to 8.11. Anyone has a solution?You could try playing with your options in the device section. I was not able to start X after upgrading catalyst to 8.12 but disabling the "TexturedXrender" option got it working again.
Maybe you are looking for
-
Fastest way to install windows 8 with windows 7 or vice versa
Hi How much time did it take for you install windows 8 on your pc as a dual boot? It took me 5m56s!!! The only difference between you all and me would be the method via which we installed. This method does requires legal windows 8 copy or the one whi
-
Help my phone was fine turned off and now will not turn back on!!!!!
Hi Everyone, I am a grandmother who is very new to these smartphones. I got one of the droid incrdible 2's by HTC. The phone was working fine until one night I turned it off and went to bed. Upon waking found the phone would not turn back on???
-
Exception Handling in webdynpro abap
Hi I have a function call which raises an exception. How do i handle it?
-
Why do we need to republish workflows in case of Sharepoint migration?
Hi, Why do we need to republish the designer workflows when we migrate ?I searched and found that "association id" for workflow is changed during migration which may be the reason .
-
How to maintain high image quality of still images
Hello, I have been creating flipbooks out of still images shot on a canon MK II. They are 8 mp files and look great blown up large in photoshop, however, once imported into iMovie through iPhoto and played as a sequence in rapid succession they seem