Cannot start Messages - application not responding.

I've been unable to launch Messages for the past few days. No new installs that I can think of. I've been on Yosemite for awhile so I don't think it's Yosemite related.
Messages will just hang and I have to force quit.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try to launch Messages. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Similar Messages

Why is messages application not responding?

Why cant i view/send messages on my macbook pro? It is always saying "application is not respondin".

Thanx for your reply . I have forced quit and tried again but to no avail. By rebooting you mean restart the computer? If yes I've done that a lot of times still it doesnt open/respond. Before ( i forgot if it was the upgrade or what i did ) i could receive/send replys thru Messages but now I cant. Again thanx for your help.

How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

You could try booting into Safe Mode to see if that will help. And "Repair Permissions" in Disk Utility.
Have you got Keychain set to open on Login or is it attempting to open on it's own.

'Application not responding' message

I am new to iChat (and to Macs generally). The other day I tried out iChat (having set up a .Mac account) and everything seemed fine. But ever since then when I launch iChat the Buddies window comes up and the little spinning colour cicle goes round for ever and from the Dock the menu item at the top says 'Application not responding'. I have seen that others have had this problem but I don't seem to be able to access the answers they got. Any help would be much appreciated.

Hi The Old Wreck,
Did you run through these screens ?
http://www.siriusaddict.com/ichat.html
These should have enabled you to type in your Screen Name when you selected the correct account type.
If you are not sure then delete all the .plists for iChat.
This will mean going to /Users/(your Account)/Library/Preferences
(Open your hard drive then Users then your Account (little house iCon) then the Library in there then Preferences)
Find these items
com.apple.iChat.AIM.plist
com.apple.iChat.Jabber.plist
com.apple.iChat.plist
com.apple.iChat.SubNet.plist
com.apple.iChatAgent.plist
Put them in the trash (Delete them)
Try iChat again.
It will make you go through the Start Up screens again.
Also check the Address Book.
Find the Me Card (Head and shoulders icon)
Make sure this shows your details including your @mac name.
2:03 PM Friday; December 29, 2006

Max OSX10.10.3, Adobe acrobat/document cloud goes into "application not responding mode" right away. must force quit. cannot use the program. Why?

Have never been able to get this application, adobe acrobat dc, to work on my mac. Constantly goes into "application not responding" mode. Happen to anyone else and know how to fix it?

Hi Nicholas,
Verify if Protected View and Enhanced Security are Off. Go to Acrobat-> Preferences -> Security (Enhanced):
Also having too many fonts active can hurt the performance of any application.
Try the step 10 of the KB: https://helpx.adobe.com/x-productkb/global/troubleshoot-fonts-mac-os-x.html
Regards,
Rave

Applications not responding leads to Disk Utility failure

Hi everyone.
I have a mac mini running 10.4.8 and recently it started hanging up on applications (particularly firefox). I'd get "application not responding" messages and even when I wasn't doing anything at all to my machine, it would stop responding.
I tried to boot up off the install CD and run disk utility but got "The underlying task reported failure on exit"
Unable to repair
Unable to verify
Additionally, I cannot mount my volume. Nor can I get any options to reinstall/reformat as from the Installer my hard drive does not show up as an available volume to install on.
Also, when I try to startup, if I pick something other than the CD, it just flashes the grey apple screen for about 5-10 minutes and then shuts off.
It did, however, pass hardware test.
The error I get in First Aid before repair stops is "Invalid Node Structure"
But...I'm not sure where to go from here.
I haven't installed anything new and it was totally fine previously.

You have serious damage to the disk and will need to either buy Disk Warrior and see if it can repair the damage, or zero the drive and reinstall. If you have a recent clone the reinstall would be relatively painless. If you don't have your drive backed up to an external drive you now know why you should have done this. If you are lucky Disk Warrior will be able to repair the damage. I suggest that you immediately buy a firewire drive and install Tiger on it and then boot from the external and see if it is possible to recover your files that haven't been backed up from the internal drive. Do this even if Disk Warrior succeeds. Drives fail. The older the drive, the more likely it is to fail. Rule of thumb: don't fully trust any drive that is 5 years old or older. And always have backups. Always.
Francine
Francine
Schwieder

Mouse over dock icon no longer indicates "application not responding"

A very convenient feature seems to be missing from Snow Leopard. In prior versions, if an application was not responding, holding the cursor over its dock icon would display "[Application] Not Responding" and also an option to Force Quit. This status message does not appear in Snow Leopard.
Are we to assume that if we click and hold on a dock icon and "Force Quit" is presented as an option, that the application has stopped responding?
Suggestions?

drdocument wrote:
Thanks!
So if I click and hold a dock icon and "Force Quit" is shown instead of "Quit" would that indicate that the particular application is in the midst of some process and simply unable to respond?
Should I simply allow more time for the app to finish whatever it's doing?
it could be either. sometimes an application is busy and is showing as not responding but will come out of it after a while. but sometimes it's truly hanging and then you have to force quit it to get rid of it. there is no way to tell just by looking at the dock. give it a bit of time and if it's still not responding then force quit. but if it's happening all the time then you may have problems with your system.
In particular, here, I've launched DiskWarrior 4.2 on a Mini (via Screen Sharing from my Mac Pro) in an attempt to rebuild directory on a My Book 1TB external drive connected by FireWire, which Disk Utility indicates needs repair but DU cannot repair. Ideas?
so what does disk warrior say when you try to rebuild the directory? and you should also verify the internal drive on the mini too.

G510 Application Not Responding. Do you want to end the process?

I am extremely frustrated with my g510 laptop- so frustrated that I am about to go spend money on a new laptop when then one is only 10 months old.
Computer boots fine. I start to use it. Doesn't matter what application I am running I get a message box titled Microsoft Windows: Application Not Responding...do you want to end the process. Doesn't matter what I hit the computer will then not respond.
Frustrated with what was going I tried several things...eventually I gave up and just reset the laptop completely to factory and then downloaded the few programs I use and am STILL getting this message.
I run Mcaffe Internet Security and the "few programs I use" are Adobe CC for Photographers, Google Chrome and Yahoo Messenger.
Anyone have any ideas or do I have a $700 boat anchor?
Solved!
Go to Solution.

Hi Amykay74,
Welcome to Lenovo Community!
As per the query we understood that you are facing issues with application not responding in your Lenovo G510 laptop.
As you have mentioned that you are using the MacAfee internet security, try to uninstall the MacAfee internet security and check for the issue.
Hope this helps. Do post back if the issue persists!
Best regards,
Ashwin. S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Application Not Responding - Mac OS X Lion & CS5

I keep having issues with my DW CS5 (11.0 Build 4993) & Mac OX Lion. I bought a new MacBook Air and installed DW CS5 on it, I did all the updates too for DW, but I'm having issues with it freezing and then crashing and not relaunching. I do some simple change on a website and the application freezes and says Application Not Responding. After force quiting I try and relauch and I get the green welcome screen like it's launching but then nothing comes up and it says Application Not Responding (ANP). I've tried restarting and sometimes that will make it so it actually launches completely but then after a while it starts up again with the ANP. I considered that maybe the MBA wasn't quick enough, but I think it's plenty powerful for doing DW. When I got back to my iMac at home I started to have the same issues after upgrading it to Lion. There seems to be an issue with CS5 and Lion. Any ideas?
Thanks,
Cody

CS5 was a fresh install on the MBA, on my iMac it was a fresh install as well (but back when I got the iMac a few months ago and was still using SL). I do have extensions on my iMac, but not on my MBA so I don't think that could be the cause (although I may try it and see). I usually would have Firefox, Safari running as well. Sometimes Photoshop and iTunes would be running too. If an error message does pop up it's usually the Mac's "Application Quite Unexpectantly" is that the type of message I should try and provide to Adobe?
I don't believe a specific action invokes the freeze/crash I've had it happen when I try and open an HTML page, when I try and save an HTML or when I try and select text to make a text change. I'll try and note exactly what I was doing the next time it happens, it seems to be speratic but very annoying cause it can take a few times of force quitting and relaunching to get DW to open back up.
Thanks,
Cody

Firefox hangs when I use it. error message says 'not responding' tired of this. it happens more and more. Do I have to stop using firefox

When I start FF it application hangs (freezes) some times over a minute. Message say FF is not responding. . Have had my PC checked, it is clean, cleared the cache and performed everything else I can think of. When I click to change pages, it does the same thing.

Does everything else on your computer work as expected, is it only firefox that you have a problem with ?
If so Try Firefox in [[safe mode]]
# do not make changes in the first options window, just click on continue.
# use only the default theme
# if you still have problems, then whilst still in safe mode, disable your plugins
* see [[troubleshooting extensions and themes]]
Try firefox on a file on the local computer, eg save a web page and open it on your harddrive with firefox, presumably that works ok without giving messages of not responding.
Also
*are you using Firefox 8 and the problem computer to send these posts ?
* what is the exact error message ?
* if applicable see [[Firefox is already running but is not responding]]

I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding"

I have a macbook pro 10.8.5 and the Application Safari will not open no matter what i do, I try to open the menu of Safari but it won't let me either, the mouse will just be loading. Each time i open it, it says "Application Not Responding" and I try opening it in my Finder and it'll say "The Application 'Safari' cannot be opened." and below that it'll say "-1712" Please help? I would really like to open it again.

The application Safari can't be opened -1712
What to do about "The application 'Safari' can't be opened" -1712 ?

Microsoft Word Freezing Repeatedly, Application Not Responding

Just wondering if anyone else was having issues with Microsoft Word from MS Office 2008, where you open the application, you type a few sentences, and the application freezes with the spinning circle of death that won't go away until you click the dock where it says "application not responding" and do a force-quit? You can leave the circle spinning for 10-20-30 minutes, and it never goes away.
Now for the weird part--this error only happens for me when I'm using a specific document on my computer. I can open Word, start a new document, type several paragraphs of text, and it works fine. But I've been working on an existing paper for about two months that all of a sudden started causing these freezes/crashes when editing it. It's about 30 pages roughly, no images, no big inserts that would take up a lot of memory (116 kb in size). And up until today, there were no problems. So why all of a sudden can't I edit anything on this paper without freezing the program?! I downloaded the Microsoft Office 2008 Service Pack 1 that was just released after this problem started, and ran all the recent Java and program updates through Software Update with computer restarts. I even copied the text from the Word document I was working on, pasted it into a new document, tried saving it as both .doc and .docx, and again the program still freezes when working with that text in a new file. This one baffles me. It's like the text within a document is somehow freezing the application. One thing I did notice is that the freezes seem to happen when I'm scrolling using a mouse wheel. Not always, but quite a bit. I suppose this is some memory issue related to several pages of text that the program can't render or process when you add new lines of text or scroll, but again, I can't figure why this paper I've been working on for months all of a sudden decided to start freezing Word today. Can you really only have 30 double-spaced pages of text in Word before it crashes?
Looks like I've found my reason to switch to Open Office, since I'm 3-4 days out from a deadline. Any other solution strategies would be welcome. Thanks.

Same problem here - Microsoft Word 2008 (update 12.1.7) will open fine, and then start the spinning pizza of death. Only way out is to force-quit the app. I've tried:
1) deleting plist and font cache files
2) uninstalling MS Office 2008, reinstalling and then re-applying updates 12.1.0 and 12.1.7
3) confirming that Apple's Font Card.app can verify all fonts
No luck. Currently I can't open any MS word doc without the spinning pizza of death.
If you are lucky enough that these symptoms only happen with a specific Word .doc file, I would see if the PC-originator could re-save the file as .RTF and resend. If you can then open it OK, you could revert back to .doc (or .docx) format. RTF format is Microsoft's interchange format. If there are anomalies in the .doc file, saving as .RTF can sometimes clean them up. Once done, you can revert back to native MS Word format.
...b

ITunes 11.2.1 freezes when I connect my iPhone 5. 'Application not responding'

Hi,
Recently I upgraded Mavericks. Since then I cant sync my phone anymore. iTunes works fine untill I plugin my phone. Then the spinwheel comes up and stays there forever. In dock it says 'Application Not Responding'.
iPhone 5, iTunes 11.2.1, Macbook Pro 10.9.3 2.6 GHz 8Gb
Does somebody can help me out? That would be very very nice!

Hi BlackNikes
I had exact same problem, but have now resolved it. If your problem is the same as mine your SyncServices folders have been corrupted while itunes was updated.
See my post or spyder683 post at https://discussions.apple.com/thread/6223064?start=60&tstart=0
I am running Mavericks 10.9.3 and updated itunes to 11.2.0 and then experienced problems with itunes crashing, 11.2.2 didn't resolve the problem. I found iTunes worked fine if all my other devices (iphone, ipad, ipod) were turned off, as soon as I powered any one of them up and itunes detected them over wifi or USB itunes then froze with the dreaded colored ball spinning.
In Mavericks 10.9.3 the SyncServices folder is not visible going into the normal library/Application support folder, your instructions below took me to a different area in the system, or at least made these folders visible. Following your instructions I was able to locate and delete both SyncService & SyncServices folders and I launched iTunes again while my devices were powered up and the issue has gone. Bliss!!!
Many Thanks
spyder683 wrote:
Hi Culero,
The fix of deleting the SyncServices folder is for Mac systems. From your desktop / finder, click the "Go" menu at the top, then "Go to Folder ..." Paste this into the field: ~/Library/Application Support
The SyncServices folder should be in there. I had both a SyncService and a SyncServices folder. The second one should, when deleted, help with the problem you and I both had of iTunes freezing when an iOS device is plugged in.
Hope this helps

Itunes application not responding when I plug in my iphone

I am on itunes 8.2 and when I plug in my iphone itunes just goes into application not responding.
I wait for a while and then unplug the phone and it goes back to working again.
On the phone there is no "Sync" message. In fact with the phone plugged in I can access the phones apps just as if it was not plugged in.
But initially when I plug it in, it does the double vibrate and shows the charging graphic so I know the cable is ok.
The phone is already on 3.1 apparently because some new features are there... like selecting multiple photos to email.
But I don't recall ever running any updates in itunes to make it use the new software as I read you were supposed to do.
I don't want to upgrade to itunes 9 because I read so many people having problems with it... but I wonder if the phone is no longer compatible with itunes 8.2
Any help is appreciated.
Thanks.
-Jeff

Do you know if the problems people have reported with itunes 9 was before the 9.1 release?
I've heard tons of people saying they were reverting back to itunes 8.2 because 9 was so bad.
Am a bit nervous about that update because of that.
But an applecare guy told me that the 9.1 was supposed to address those issues. I have just not heard anything about that actually fixing things though. Still seems like a lot of people are dreading the new itunes 9.
If you are an itunes 9 user, did you have any problems with it wiping out your library or any terribly long syncing times?
Thanks.

Can't Open 3rd party Apps with my User (Icon Bouncing then Application Not Responding)

Hi
Problem:
I can't Open 3rd Part Apps with my user (FireFox, Chrome, Dropbox, GoogleDrive, Mega, Final Cut Pro X, etc) they just star bouncing and after a while they stop bouncing then i righ click on them and it says "Application Not Responding", but i can open native apps like Safari, iTunes, iMovie, Finder, Settings
Other Events:
-Just Before this happend i was editting a video on FCPX, y export it and tried to upload to Google Drive (in Chrome), when it was uploading I closed FCPX and the uploading stop it at 91%, y tried to reupload but then I realized that this video was in a temp folder and it wasnt there anymore, so I open FCPX to export it again and i couldnt, it was just bouncing and then "App not responding".
-After Installing Yosemite i feelt it slow even after it finished the encriptation File Vault, specially in chrome.
I have tried:
1-Repair Disk Permisions
2-Reset SMC
3-Reinstall FCPX
4-Decrypted the Disk and create another user and i was able to run Chrome, FireFox and FCPX, When I opened FCPX it started but when it was trying to open the project that i was working , it restarted the app and i couldnt open FCPX again, just bouncing and App Not Responding
Any suggestions to keep my User working?
Macbook Pro Mid 2012
-OSX Yosemite,
-16GB Ram1600MHz DDR3
-750GB 5400RPM
-2.9GHz dual-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 4MB L3 cache

Yes, as long as you let TM do a full disc backup (that is, you do not exclude anything in the TM backup settings) you will have a backup that allows a full system restore - puts everything back just as it was.
You can also clone your system using the shareware app SuperDuper or the donation-ware app CarbonCopyCloner
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
http://www.bombich.com/
Both of these apps will make a true clone (literally, a bit-by-bit copy) of your hard drive onto an external drive. This clone will actually be bootable itself (you plug in the drive and hold the option key during startup then select the clone to boot from). You would boot from the clone, then reverse-clone it back onto your internal hard drive.
If you are really serious about being highly confident of not loosing files, you could use both - I keep a TM backup on one drive, and 2 clones on separate bus-powered hard drives.
P.S. even if you had not had any issues, you really, REALLY should be keeping regular, up to date backups anyway - things go flooey without warning sometimes and you risk loosing everything on your machine if you DON'T keep regular backup copies available.

Cannot start Messages - application not responding.

Similar Messages

Maybe you are looking for