Cannot start more than 1 oidldapd
Oracle 8.1.7 on HP-UX 11(64bit)
When I try to start more than 1 oidldapd server I receive in log:
2001/07/01:13:47:31 Oid Server Connected to DB store via ldwire connect string.
2001/07/01:13:47:31 OiD LDAP server started.
2001/07/01:13:47:31 sgslunlListen: unable to bind endpoint (226)
2001/07/01:13:47:31 dispatcher listener: fatal : unable to open port 389
2001/07/01:13:47:36 Dispatcher controller: OiD LDAP server exiting..status:0
I've noticed also that oidmon and oidldapd executables are owned by root and has sticky bit set. So maybe I should start this as a root with proper environment set. (Maybe it has sth to do with above error)
null
Hi Michal
If you want to start more server proc esses you will need to create a new configset in the Server Management section using the ODM tool. Although you can have many oidldapd processes you must start the new process on a differerent isntance number than the default configset 0. After creating your new configset you would start it something like this:
oidctl connect=oid_sid server=oidldapd instance=2 configset=2 start
Hope this helps
Jay
null
Similar Messages
-
Error: An attribute cannot appear more than once in the same start tag
Hi Everyone,
when i run the page sometimes it works fine but sometimes it throws Compilation Error as below.
"Error(502,1224): file:/C:/Jdeveloper/jdevhome/jdev/myhtml/OA_HTML/fwk/t/Session_2055663493/region1.uix<Line 502, Column 1224>: XML-20124: (Fatal Error) An attribute cannot appear more than once in the same start tag."
And i delete the particular file from the path and run the page so this time it works fine.
But later after sometime i get the same error but the session number will be changed, then again i need to delete it and run.
What can be the permanent solution for this issue?
Plz let me know any suggetions.
Thanks.Seems like the mdl file is corrupted or was not generated correctly.
Can you try to create the mdl file again and then try the import ?
If it doesn't work then try contacting Oracle Support. -
Since downloading iOS on my new iPad, I cannot downlaod more than one pdf from mail into iBooks. I have to shut down my iPad and restart it to save a second pdf. Wasn't a problem with the old operating system. Any suggestions?
It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this. -
Cannot move more than 2 mailboxes from exchange 2007 to Exchange 2013
I have been trying to move mailboxes from ex2007 to ex2013with the new-migrationbatch and the new-moverequest command.
I have a DAG-cluster with two servers with all roles.
What happens is that I cannot get more than two concurrent mailbox moves. If I restart the MRS-service nothing happens. I have changed the config-file for the mailbox replication service and currently have these settings:
MaxMoveHistoryLength="5"
MaxActiveMovesPerSourceMDB="20"
MaxActiveMovesPerTargetMDB="20"
MaxActiveMovesPerSourceServer="100"
MaxActiveMovesPerTargetServer="100"
MaxTotalRequestsPerMRS="100"
What is funny is that when I start a new batch with autocomplete off, only two mailboxes goes to 95% and the rest of them is not even started.
The command I use is New-Migrationbatch -local -Name TestNew -csvdata ([System.IO.File]::ReadAllBytes("c:\temp\exchange\migration\testmigration.txt")) -targetdatabases mdb001,mdb002 -autostart
Here is the output of Get-MigrationConfig | fl
RunspaceId : d382f8a7-924a-4f0e-812e-f18970b632e2
Identity :
MaxNumberOfBatches : 100
MaxConcurrentMigrations : Unlimited
Features : MultiBatch
CanSubmitNewBatch : True
SupportsCutover : False
I have off course restarted both servers and services.Just out of curiosity, on which server you made these changes? Mailbox or CAS? And on Target or Source Server?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Cannot run more than one instance of a remote app in remote desktop services Server 2012
All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSUHi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP -
Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks
Dear All,
I get the Following Error in the Essbase console when I try to Execute any CalcScript.
Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting)_+
Please find the detailed output of the Statics of my Planning Applications Database and outline.
please help guys........
GetDbStats:
-------Statistics of AWRGPLAN:Plan1 -------
Dimension Name Type Declared Size Actual Size
===================================================================
HSP_Rates SPARSE 11 11
Account DENSE 602 420
Period DENSE 19 19
Year SPARSE 31 31
Scenario SPARSE 6 6
Version SPARSE 4 4
Currency SPARSE 10 10
Entity SPARSE 28 18
Departments SPARSE 165 119
ICP SPARSE 80 74
LoB SPARSE 396 344
Locations SPARSE 57 35
View SPARSE 5 5
Number of dimensions : 13
Declared Block Size : 11438
Actual Block Size : 7980
Declared Maximum Blocks : 3.41379650304E+015
Actual Maximum Blocks : 1.87262635317E+015
Number of Non Missing Leaf Blocks : 10664
Number of Non Missing Non Leaf Blocks : 2326
Number of Total Blocks : 12990
Index Type : B+ TREE
Average Block Density : 0.01503759
Average Sparse Density : 6.936782E-010
Block Compression Ratio : 0.001449493
Average Clustering Ratio : 0.3333527
Average Fragmentation Quotient : 19.3336
Free Space Recovery is Needed : No
Estimated Bytes of Recoverable Free Space : 0
GetDbInfo:
----- Database Information -----
Name : Plan1
Application Name : AWRGPLAN
Database Type : NORMAL
Status : Loaded
Elapsed Db Time : 00:00:05:00
Users Connected : 2
Blocks Locked : 0
Dimensions : 13
Data Status : Data has been modified
since last calculation.
Data File Cache Size Setting : 0
Current Data File Cache Size : 0
Data Cache Size Setting : 3128160
Current Data Cache Size : 3128160
Index Cache Size Setting : 1048576
Current Index Cache Size : 1048576
Index Page Size Setting : 8192
Current Index Page Size : 8192
Cache Memory Locking : Disabled
Database State : Read-write
Data Compression on Disk : Yes
Data Compression Type : BitMap Compression
Retrieval Buffer Size (in K) : 10
Retrieval Sort Buffer Size (in K) : 10
Isolation Level : Uncommitted Access
Pre Image Access : No
Time Out : Never
Number of blocks modified before internal commit : 3000
Number of rows to data load before internal commit : 0
Number of disk volume definitions : 0
Currency Info
Currency Country Dimension Member : Entity
Currency Time Dimension Member : Period
Currency Category Dimension Member : Account
Currency Type Dimension Member :
Currency Partition Member :
Request Info
Request Type : Data Load
User Name : admin@Native Directory
Start Time : Mon Aug 15 18:35:51 2011
End Time : Mon Aug 15 18:35:51 2011
Request Type : Customized Calculation
User Name : 6236@Native Directory
Start Time : Tue Aug 16 09:44:10 2011
End Time : Tue Aug 16 09:44:12 2011
Request Type : Outline Update
User Name : admin@Native Directory
Start Time : Tue Aug 16 10:50:02 2011
End Time : Tue Aug 16 10:50:02 2011
ListFiles:
File Type
Valid Choices: 1) Index 2) Data 3) Index|Data
>>Currently>> 3) Index|Data
Application Name: AWRGPLAN
Database Name: Plan1
----- Index File Information -----
Index File Count: 1
File 1:
File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.ind
File Type: INDEX
File Number: 1 of 1
File Size: 8,024 KB (8,216,576 bytes)
File Opened: Y
Index File Size Total: 8,024 KB (8,216,576 bytes)
----- Data File Information -----
Data File Count: 1
File 1:
File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.pag
File Type: DATA
File Number: 1 of 1
File Size: 1,397 KB (1,430,086 bytes)
File Opened: Y
Data File Size Total: 1,397 KB (1,430,086 bytes)
File Size Grand Total: 9,421 KB (9,646,662 bytes)
GetAppInfo:
-------Application Info-------
Name : AWRGPLAN
Server Name : GITSHYPT01:1423
App type : Non-unicode mode
Application Locale : English_UnitedStates.Latin1@Binary
Status : Loaded
Elapsed App Time : 00:00:05:24
Users Connected : 2
Data Storage Type : Multidimensional Data Storage
Number of DBs : 3
List of Databases
Database (0) : Plan1
Database (1) : Plan2
Database (2) : Plan3ESM Block Issue
Cheers..!! -
In Apple Mail, I cannot add more than one address to the "To" line
In Apple Mail, I cannot add more than one address to the "To" line by typing just the initial
HHow are you. Trying to add the second address? Normal procedure after the first address is to type a comma, then start typing the name for the second address.
-
Multitasking cannot handle more than 3-4 apps
Multitasking cannot handle more than 3-4 apps. If you open more, the app just wont launch! I hope there would be a fix for this since it is very annoyoing.
Just tested it again. You are right. we can open many apps as long as they are non blackberry bridge apps. The problem seems to be with the blackberry bridge apps opening simultaneously with other apps.
try to open 3 or 4 non bridge apps, then try to open any of the bridge app (contacts or bbm or other...). It just wont open. If it does open, it starts flickering and becomes unusable.
Also, if you try to open more than 3 bridge apps, you will most often have problems.
I tried this on more than one PB. Same thing. -
Cannot insert more than 1 WSUS update source with different unique ids
Hello LnG
I am aware that are a whole bunch of forum threads on this error however little bit of additional help would be of great help, as I have nearly tracked this 'pain' down.
Our environment: SCCM 2007 R3
1 Central
15 Primaries and a whole bunch of secondaries
Single WSUS server
OK, so we have just taken handover of this new account and still getting a hang of the creek and corners in the environment. We have about 1000 machines sitting in "Failed to download updates" state. Error
= 0x80040694
WUAHandler.log:
Its a WSUS Update Source type ({A2762CA9-9739-4260-9C3A-DC4B36122E16}), adding it
Cannot insert more than 1 WSUS update source with different unique ids
Failed to Add Update Source for WUAgent of type (2) and id ({A2762CA9-9739-4260-9C3A-DC4B36122E16}). Error = 0x80040694.
Its a WSUS Update Source type ({BCB9D60B-2668-459B-BFFD-6DDD11AADC53}), adding it
Existing WUA Managed server was already set (http://WSUSServername:8530), skipping Group Policy registration.
Added Update Source ({BCB9D60B-2668-459B-BFFD-6DDD11AADC53}) of content type: 2
WUAHandler
Async searching of updates using WUAgent started.
Checked the
CI_UpdateSources table and found 2 Update sources unique ids:
{BCB9D60B-2668-459B-BFFD-6DDD11AADC53} Date Created 2011-01-11 03:47:52.000/Date Modified 2011-01-11 03:47:52.000
and
{A2762CA9-9739-4260-9C3A-DC4B36122E16} Date Created 2014-07-09 02:48:46.000 / Date Modified 2014-07-09 02:48:46.000
My questions:
Can I rely on the last modified/created date for inactive update source and delete it off the database? in this case can I delete {BCB9D60B-2668-459B-BFFD-6DDD11AADC53}?
When i browsed to the registry location on the Central Server
HKLM\Software\Wow6432Node\Microsoft\SMS\Components\SMS_WSUS_SYNC_MANAGER i saw the update source as {BCB9D60B-2668-459B-BFFD-6DDD11AADC53}.
Does it imply that a stale record?
Any help/guidance will be much appreciated :)Well!! My wsyncmgr.log says this:
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX1 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX2 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX3 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX4 to 18
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX5to 1
Set content version of update source {BCB9D60B-2668-459B-BFFD-6DDD11AADC53} for site XX6 to 18
So, this is an active update source! ?? I cannnot uninstall and reinstall SUP currently. Any thoughts?? Any ody? -
I have just removed FireFox and reinstalled it again on my Mac Book PRO.
When I open FIreFox I canNOT open more than 1 TAB.
I click on the "+"on the top line of the window. It should open another TAB but id does NOT.
I click on the File item in the top menu bar. A drop-down menu pops up. I click on "New Tab" and nothing happens.
How can I get more than 1 Tab on the same window ?
This feature works with Safari !
Thank you so much.
Best regardsWe have seen reports about a Community Toolbar extension causing this issue with not being able to open a new tab.
So if you have such a toolbar then start with disabling it.
*Tools > Add-ons > Extensions
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
CANNOT COPY MORE THAN 11 SONGS TO AN 8GB MICROPH
I'm in need of help. I had all my music on my microphoto and one day it started to rebuild it's library and it never recovered. So I did the recovery and formatted, cleaned and even updated my firmware. I rolled back to media player 0 and everything, but I cannot copy more than songs to my player.
I am in need of help. I can verify the space on my microphoto and it's in excess of 7gb.......please help. Thanks.What you can do is to show hidden files in the control panel
. Open COntrol Panel
2. I f you are in category view, click? "Performance and Maintenance"
3. On the top left corner, Click "File Types"? (If you are in classic view, there is an icon for it)
4. Go to the "View Tab" and select the option "Show hidden files and folders"?
Then plug your ZEN Microphoto to your computer,? Open my computer, locate your Microphoto and try to see if there is any files that are filling up your player. Play around the folders and stuff and If you do find some stuff, delete it from your player. -
Cannot open more than one photo in Photoshop
Hi
I don't know if anyone can help me, but I am having an issue with Photoshop CC (2014), I cannot open more than none photo at a time, and keep getting the attached error.
It has been working fine, until i have tried it this evening.
Regards
MickThere's something wrong with your system.
Please give detailed information.
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I cannot select more than one message at a time to delete from the trash. I did not have this problem before I updated to Maverick. What am I doing wrong?
This works in many different ways and in lots of apps.
Hold down the command key and you can select from a list (leaving some not checked) to exclude them from the delete process.
To empty all of the trash folder use command-a keys to "select all" and then the delete key to remove them. -
Cannot have more than one Mobile item for a person
Hi,
I cannot have more than one mobile phone item for a person. In India some of them carry dual SIM card phones and both will be valid. In Lumia 800, I dont see an option to add two mobile items. I can do with a work around by choosing one mobile item with Windows Live Account and another with Google Account. But then that is not the right way to do it. If I need it both on same account, then I cannot do it.
This feature is available in all the Android phones. Also i am facing another issue is that Lumia 800 does not sync any mobile item #2 of Google account, so I have to go to Google and manually add that phone number to my phone, which is painful.
Hope Microsoft is listening.
But I really like the way the facebook, SMS and all other chat are sync'ed in one place.
Regards,
-Srinivasan.The wierd thing is they have duplicates for Home/Work but not for Cell. I have the odd contact that has two cell phones. Really only two work arounds, use one of the other available types as a secondary cell number or what I do is create two contacts, one in Exchange and one on Live. Since my main account is Exchange, I put the secondary number in the Live contact, then on the phone I link the two together. This way I see two cell numbers for one contact.
-
ORA-01776: cannot modify more than one base table through a join view
I have created EO based on a database view than consists of two tables, and only one is updateable.
When I try to update a row using EO, I got a following message: "ORA-01776-cannot modify more than one base table through a join view"
In Forms, this issue is resolved by setting "Query Only" property of non-updateable items to "True".
Is it possible to do something like that in ADF BC?
ThanksThanks for answer.
When I set "updateable" property to "Never", that attribute is protected from any change.
I'm sorry for incomplete usecase.
I have set up a list of value on that attribute, because it is a lookup field for another table and I need to get an ID from that table.
Basically, I need that attribute to be updateble for BC, but not for database.
Edited by: MarioK on Oct 13, 2011 9:28 AM
Maybe you are looking for
-
User-configurable region ordering
We have a requirement for users to be able to specify the ordering of regions on a page. A typical page may show 5 to 10 reports, some of which are more of interest to some users than to others. Therefore, for user A it may be appropriate to show the
-
Error on Synchronizing Users With the Provision Users Utility
Im using ProvisionUsers.sh to realize the provision users from linux console.... The process is retreiving an error.... the error says Error retreiving user by identity Embedded HBR initialized , I dont know what does this error means.... Anybody??
-
My online college network says t does not support firefox 7.0
Wednesday, September 28, 2011 public Before you upgrade your browsers: Currently, the newest browser versions of Internet Explorer (9 and 10) and Firefox (5 and above) are not supported browsers with Angel. (Safari and Google Chrome continues to be u
-
Error corrected import from USB drive fails
When I try to import CD tracks using an external USB CD/DVD drive, it fails if I have error correction turned on.
-
Set Application Parameter for Table
Hi all, Can anyone explain me how to set application parameters for a web dynpro application. Is is embedded in an iView in Portal. I want to set the parameter WDTABLENAVIGATION to SCROLLBAR. I cant find it under Application properties. Thanks