Cannot start msexchange rpc client

I attempted to install exchange 2010 sp3, but it failed. After that users were not able to connect to exchange, no connections via rdp and the company web site is no long accessible(smb 2011 standard). I see event id's 1008 and 4999 in the event viewer.
Any services dependent on the rpc service will not start. starting the ms exchange rpc client service manually results in an error 1067. Is there any way to find out why the service will not start?
I also have this info:
Encountered unexpected error when starting MSExchangeRPC service. Error details: System.TypeLoadException: Method 'EcRRegisterPushNotification' in type 'Microsoft.Exchange.RpcClientAccess.Service.RpcServer' from assembly 'Microsoft.Exchange.RpcClientAccess.Service,
Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
at Microsoft.Exchange.RpcClientAccess.Service.RpcEndPoint.Start(IRpcDispatch rpcDispatch, UInt16 endpointTcp, ExEventLog eventLog)
at Microsoft.Exchange.RpcClientAccess.Service.RpcClientAccessService.<DeferredServiceStartInitialization>b__4()
at Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate)
I also tried re-installing the update but since w3svc isn't running, the update fails.

# Tasks for 'Enable RPC-EPMAP firewall exception' component
# [ID = RpcEpmapFirewallException___2e98edb735e04324a5149bdef14dde18, Wt = 1, isFatal = False] "Configuring the server."
8/1/2014 5:33:33 PM:
if ([Environment]::OSVersion.Version.Major -ge 6)
Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.RpcEndPointMapperFirewallRule)
# Tasks for 'Enable Remote IIS Admin RPC firewall exception' component
# [ID = RemoteIISAdminFirewallException___a9729b5d18374feba59bae28eaca1db0, Wt = 1, isFatal = False] "Configuring the server."
8/1/2014 5:33:33 PM:
          if ([Environment]::OSVersion.Version.Major -ge 6)
          Add-FirewallException -FirewallRule (New-Object Microsoft.Exchange.Security.WindowsFirewall.RemoteIISAdminFirewallRule)
# Tasks for 'Bridgehead Role Setter' component
# [ID = BridgeheadRoleSetterComponent___115c1108e99e4560bd2c03c0fec99908, Wt = 1, isFatal = True] "Configuring the Hub Transport role."
8/1/2014 5:33:33 PM:
        if (get-service MSExchangeServiceHost* | where {$_.name -eq "MSExchangeServiceHost"})
            restart-service MSExchangeServiceHost
# [ID = BridgeheadRoleSetterComponent___dd9c610618d44ff9bb1635b8b946ef42, Wt = 1, isFatal = True] "Configuring the Hub Transport role."
8/1/2014 5:33:39 PM:
        if (get-service MSExchangeProtectedServiceHost* | where {$_.name -eq "MSExchangeProtectedServiceHost"})
            restart-service MSExchangeProtectedServiceHost
# [ID = BridgeheadRoleSetterComponent___ee2508bb29aa41be936a35daa983307a, Wt = 1, isFatal = True] "Configuring the Hub Transport role."
8/1/2014 5:33:42 PM:set-ExchangeServerRole -Identity $RoleFqdnOrName -IsHubTransportServer:$true -DomainController $RoleDomainController
# Tasks for 'Transport Common Configuration' component
# [ID = TransportCommonComponent___194ab1f52c3c424d917a08973d87801d, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:42 PM:
          $dllFile = join-path $RoleInstallPath "bin\ExSMIME.dll";
          $regsvr = join-path (join-path $env:SystemRoot system32) regsvr32.exe;
          start-SetupProcess -Name:"$regsvr" -Args:"/s `"$dllFile`"" -Timeout:120000;
# [ID = TransportCommonComponent___e5cfea1c2dbc439b8814423dd7be6518, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:43 PM:install-SmtpContainer -Name:"Protocols","SMTP Receive Connectors" -DomainController $RoleDomainController
# [ID = TransportCommonComponent___79d82f60693f413588aa8c3a58e90b41, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:43 PM:
          $connectors = Get-ReceiveConnector -Server $RoleFqdnOrName;
          foreach($connector in $connectors) { if($connector.MaxLocalHopCount -gt 1) { Set-ReceiveConnector -Identity $connector.Identity -MaxLocalHopCount 8 } };
# [ID = TransportCommonComponent___3b9fe8211a064c2a89ec22bb04c347b9, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:44 PM:
          $file = 'EdgeTransport.exe.config';
          $fullPath = [System.IO.Path]::Combine([System.IO.Path]::Combine($RoleInstallPath, "bin"), $file);
          if (!([System.IO.File]::Exists($fullPath))) { copy-item ($fullPath + ".template") $fullPath; Set-InstallPathInAppConfig -ConfigFileRelativePath "bin\" -ConfigFileName $file }
# [ID = TransportCommonComponent___9b4eb345817e48db8d20a50f95956fcf, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:44 PM:
          $file = 'MSExchangeTransport.exe.config';
          $fullPath = [System.IO.Path]::Combine([System.IO.Path]::Combine($RoleInstallPath, "bin"), $file);
          if (!([System.IO.File]::Exists($fullPath))) { copy-item ($fullPath + ".template") $fullPath; }
# [ID = TransportCommonComponent___9ff57943321d4a588cccaac10b5d312c, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:44 PM:
          $file = 'MSExchangeTransportLogSearch.exe.config';
          $fullPath = [System.IO.Path]::Combine([System.IO.Path]::Combine($RoleInstallPath, "bin"), $file);
          if (!([System.IO.File]::Exists($fullPath))) { copy-item ($fullPath + ".template") $fullPath; }
          set-appconfigvalue -ConfigFileFullPath:$fullPath -Element:configuration/runtime/generatePublisherEvidence -Attribute:enabled -NewValue:false
# [ID = TransportCommonComponent___347c4c4558c545fc9af82c31f1a88887, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:44 PM:
          $file = 'agents.config';
          $fullPath = [System.IO.Path]::Combine([System.IO.Path]::Combine($RoleInstallPath, "TransportRoles\Shared"), $file);
          if (!([System.IO.File]::Exists($fullPath))) { copy-item ($fullPath + ".template") $fullPath; }
# [ID = TransportCommonComponent___0a8d28fa98d04e53ad04942db8041272, Wt = 1, isFatal = False] "Configuring common Transport properties."
8/1/2014 5:33:44 PM:set-service -ServiceName SMTPSVC -StartupType Disabled
# [ID = TransportCommonComponent___1e9fcaf569a642eb9d83195e4b253c6d, Wt = 1, isFatal = False] "Configuring common Transport properties."
8/1/2014 5:33:44 PM:stop-SetupService -ServiceName SMTPSVC
# [ID = TransportCommonComponent___539d69f1dcb9495583f3f7dd3c2a7bbf, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:44 PM:
          set-transportserver `
          -Identity $RoleFqdnOrName `
          -IrmLogPath ($RoleInstallPath + "\Logging\IRMLogs") `
          -IrmLogEnabled $true `
          -IrmLogMaxDirectorySize 262144000 `
          -IrmLogMaxFileSize 10485760
# [ID = TransportCommonComponent___96c680ac82984e9a8da935845efb7bae, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:44 PM:Install-Audit
# [ID = TransportCommonComponent___3e4d1208017a4e8fa529b1d72483ac82, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:44 PM:register-ContentFilter
# [ID = TransportCommonComponent___c05511cd334841e7bc1a36550871cf9d, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:45 PM:register-ComInteropTLB
# [ID = TransportCommonComponent___0ac71b0d1d014ed0a5bd16b072c22d1e, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:45 PM:
          uninstall-MsiPackage -ProductCode '{C3F10D8C-BD70-4516-B2B4-BF6901980741}' -LogFile ($RoleSetupLoggingPath + "\UninstallASDat.msilog")
# [ID = TransportCommonComponent___85242ca8afce4b699883dac5856c2fd6, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:46 PM:
          uninstall-MsiPackage -ProductCode '{14F288C7-C695-40D5-971D-8890605C6040}' -LogFile ($RoleSetupLoggingPath + "\UninstallASEntIRS.msilog")
# [ID = TransportCommonComponent___7e6dc539164144aaa752c496b3de4304, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:47 PM:
          uninstall-MsiPackage -ProductCode '{93FCFF43-49E2-4AE5-9AD4-0256878AB886}' -LogFile ($RoleSetupLoggingPath + "\UninstallASEntSig.msilog");
# [ID = TransportCommonComponent___3f4a70ff37b549999a228ec24821d0dc, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:47 PM:
          install-MsiPackage `
          -PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASDat.MSI") `
          -LogFile ($RoleSetupLoggingPath + "\InstallASDat.msilog") `
          -PropertyValues ("ALLUSERS=1") `
          -UpdatesDir $RoleUpdatesDir
# [ID = TransportCommonComponent___0950ec0c6c894ec8ad384dc89415c394, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:48 PM:
          install-MsiPackage `
          -PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASEntIRS.MSI") `
          -LogFile ($RoleSetupLoggingPath + "\InstallASEntIRS.msilog") `
          -PropertyValues ("ALLUSERS=1") `
          -UpdatesDir $RoleUpdatesDir
# [ID = TransportCommonComponent___9a710dcc5d464585ae5edc61065f8440, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:49 PM:
          install-MsiPackage `
          -PackagePath ($RoleInstallPath + "TransportRoles\agents\Hygiene\ASEntSig.MSI") `
          -LogFile ($RoleSetupLoggingPath + "\InstallASEntSig.msilog") `
          -PropertyValues ("ALLUSERS=1") `
          -UpdatesDir $RoleUpdatesDir
# [ID = TransportCommonComponent___0706a16b43394b188a2423c6d60fe9f1, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:49 PM:
          get-ExchangeServer $RoleNetBIOSName | add-ADPermission `
            -DomainController $RoleDomainController `
            -User "S-1-5-20" `
            -AccessRights GenericRead
# [ID = TransportCommonComponent___645bf7655071489787950039b21e0d6a, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:49 PM:
          get-ExchangeServer $RoleNetBIOSName | add-ADPermission `
            -DomainController $RoleDomainController `
            -User "NT AUTHORITY\SYSTEM" `
            -AccessRights GenericRead
# [ID = TransportCommonComponent___d68428dcc3c7412f9a81a28b8c331407, Wt = 1, isFatal = True] "Configuring common Transport properties."
8/1/2014 5:33:50 PM:
          Install-ResourceHealthActiveFlags

Similar Messages

  • Microsoft Exchange RPC Client Access will not start.

    A few days ago all my outlook clients were disconnected.  Looking into it and the Microsoft Exchange RPC Client Access service had died.  Tried several restarts of the system but the service will not go into a running state.  It always says
    Starting. But it is actually terminating and restarting.  In the system log get Event 7031 - "The Microsoft Exchange RPC Client Access service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be
    taken in 5000 milliseconds: Restart the service."  I can't find anything else on the error in any log file.  Some other info not sure if this related or not.  The contentIndex are corrupt and will not rebuild. Get a state of "Failed"
    with an error message of "The database has been dismounted."  Also at time the system is very sluggish.  Mostly right after a reboot for an hour or two.  Details about the system are; Running Exchange 2013 SP1 on server 2012 R2.  All
    roles on one machine.  About 20 mailboxes. Database is about 40gig. No VM, just a normal server. plenty of diskspace, memory and CPU.   The system has been running fine for about a year.  Also, mobile devices and OWA work fine.  Mail flow
    is fine.  Outlook just can't connect.  
    Tried restoring the databases and logs from before the problem started but that did not help.
    Not sure what to try from here.
    Thanks

    Hi,
    Please check whether an unavailable Public Folder database is pointed to in your Exchange 2013 mailbox database as the default public folder database setting.
    If there is no legacy public folder database and you are working in a pure Exchange 2013 environment, please remove the default public folder database setting on each Exchange 2013 Mailbox database that points to the deleted public folder database object
    in ADSI Edit:
    1. Open ADSIEdit, Connect to the Configuration container.
    2. Expand Configuration, expand CN=Configuration,DC=Domain,DC=com.
    3. Expand CN=Services -> CN=Microsoft Exchange -> CN=Domain -> CN=Administrative Groups -> CN=Exchange Administrative Group -> CN=Databases.
    4. In the right hand pane you will see a list of databases. Right-click the listed database object -> Properties.
    5. Check whether the msExchHomePublicMDB value is set to an unavailable value. If you see reference to the old database, please clear the value.
    6. Click OK.
    7. Check the rest of the databases to make sure that they are not populated in the same way.
    For more information about this, please refer to:
    http://support2.microsoft.com/kb/2962915/en-us
    Regards,
    Winnie Liang
    TechNet Community Support

  • Cannot start Discoverer Viewer and Discoverer Plus on client.

    I have installed Discoverer 9.0.2.39.0 on MS Windows 2000 server.
    When I'm trying to start Discoverer Plus an error is occured:
    DiscoServerException ??? ??????? ????????? ???????? ????????? ??????. ???????? ?? ?????????. - Nested exception: exception oracle.discoverer.corba.DCCORBAException {
    oracle.discoverer.corba.EDCIConstant mErrorCode=kNoMessage,
    java.lang.String mReason="??? ??????? ????????? ???????? ????????? ??????. ???????? ?? ?????????.",
    java.lang.String mAdditionalInfo=" ",
    oracle.discoverer.corba.DCIRow[] mEncodedInfo={}
    exception oracle.discoverer.corba.DCCORBAException {
    oracle.discoverer.corba.EDCIConstant mErrorCode=kNoMessage,
    java.lang.String mReason="??? ??????? ????????? ???????? ????????? ??????. ???????? ?? ?????????.",
    java.lang.String mAdditionalInfo=" ",
    oracle.discoverer.corba.DCIRow[] mEncodedInfo={}
         at oracle.disco.remote.corba.RMIToCorba.convertDiscovererServerException(RMIToCorba.java:165)
         at oracle.disco.model.corbaserver.ModelInterface.SendReceiveData(ModelInterface.java:194)
         at oracle.disco.model.corbaserver.serverrequest.DsrSetLocaleInfo.xmlUpdateServer(DsrSetLocaleInfo.java:84)
         at oracle.disco.model.corbaserver.serverrequest.DsrCorbaXML.corbaUpdateServer(DsrCorbaXML.java:39)
         at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(DsrGeneralCorbaXML.java:162)
         at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(ExecuteEngineImpl.java:200)
         at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(ExecuteEngineImpl.java:124)
         at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(SessionControllerImpl.java:686)
         at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(SessionControllerImpl.java:450)
         at oracle.disco.model.corbaserver.SessionImpl.setLocaleInfo(SessionImpl.java:417)
         at oracle.discoiv.session.model.ModelSession.setSessionLocale(ModelSession.java:199)
         at oracle.discoiv.session.model.ModelSession.(ModelSession.java:102)
         at oracle.discoiv.session.model.ModelSessionManager.createSession(ModelSessionManager.java:54)
         at oracle.discoiv.state.ConnectTransition.doTransition(ConnectTransition.java:33)
         at oracle.discoiv.state.StateTransition.execute(StateTransition.java:37)
         at oracle.discoiv.state.StateTransition.execute(StateTransition.java:46)
         at oracle.discoiv.state.DiscoState.getState(DiscoState.java:155)
         at oracle.discoiv.state.ConnectedState.getState(ConnectedState.java:90)
         at oracle.discoiv.state.DiscoState.getState(DiscoState.java:52)
         at oracle.discoiv.state.StateMachine.setState(StateMachine.java:75)
         at oracle.discoiv.controller.DiscovererController.setState(DiscovererController.java:236)
         at oracle.discoiv.servlet.DiscovererHttpHandler.processRequest(DiscovererHttpHandler.java:101)
         at oracle.discoiv.servlet.DiscoServlet.doRequest(DiscoServlet.java:314)
         at oracle.discoiv.servlet.DiscoServlet.doGet(DiscoServlet.java:148)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)
         at oracle.plus.servlet.Disco4iProxyServlet.doRequest(Disco4iProxyServlet.java:141)
         at oracle.plus.servlet.Disco4iProxyServlet.doGet(Disco4iProxyServlet.java:68)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
         at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
    try to start from many clients. It was error too.

    Hi,
    Were you able to find the solution to this problem? I have installed 9ias successfully. I could log to OEM and created a public connection but I cannot go to
    http://hostname.domain:7779/discoverer/viewer
    I get an error "Internal Server Error".
    Any help is welcome
    Vani

  • Cannot start NM client and register on N97

    I have N97 with up-to-date firmware. I installed NM, as per instructions on email.nokia.com through the phone browser - no problems there. When I start Email application (from Menu/Applications/Menu) it goes though email setup process which ends with successful creation of an email account in Messaging folder. Once set up is completed and Email client application is run again, it goes again to email setup and does not start nokia email client.
    Within the whole process, there was no option to register to Nokia Messaging account.
    I can receive and send emails, but through basic SMS-type client. How can I get NM client running?

    What version of firmware is device running? Also, which country and which operator are you using? Are you able to log into your account at email.nokia.com?
    Chris McK - Nokia Messaging/Social Product Marketing

  • No new mail notification in Outlook - CAS Exchange RPC Client Access problem

    Hi, we're facing this problem:
    Users start complaining they suddenly don’t receive new mail notifications in Outlook (2010/2013)  anymore
    Inbox does not show the new mail either
    When the user changes folders in outlook, the new mail does show in the Inbox folder
    Restarting Outlook shows the new mail as well.
    The same new e-mail arrives instantly (with notifications) in Owa and on mobile devices
    Sometimes the new mail notification pops up after a longer period of time (from 30 seconds to 10 minutes). But more often not at all.
    This issue seems to occur at random. We’ve been problem free for a week, and sometimes it comes back three times a day.
    Clients running Outlook 2010, 2013 cached or online, on site and off site. So it seems server related, not client.
    It was seen first around January 8th. We did not make any changes around that time that we can link to this problem.
    Only one CAS server (EXCH1-RTD) shows this issue. CAS servers on other sites are ok
    EXCH1-RTD has CAS and HUB transport roles. The same site has two mailbox only servers. EXCH2-RTD (mailbox server for normal mailboxes). And EXCH3-RTD (mailbox server for archive mailboxes)
    No entries in the event logs that seems to be related
    As the problem only occurs with Outlook clients, I suspected RPC issues. We cannot gracefully stop the “Microsoft Exchange RPC Client Access” service on EXCH1-RTD  while the issue occurs. We
    can only kill the process and restart the service, solving the issue instantly.
    What we’ve tried until now:
    Updated all Exchange servers from Exchange 2010 SP3 RU6 to RU8-v2 (server OS=W2K8R2)
    Updated all Exchange servers  to latest critical Windows updates
    Recalculated requirements using MS Sizing tool.  Upgraded EXCH1-RTD  VM from 8GB and 2 vCPU (1 core/cpu) to 16GB
    and 4vCPU (1 core/cpu)
    Ran various perfmon counters and compared them with other Exchange servers, not finding any obvious anomalies.
    Any ideas would be greatly appreciated!
    Ron

    Hi Ron,
    From your description, OWA works well, the issue is related to Outlook side. In your case, I recommend you use Outlook safe mode to determine whether the issue is related to add-ins. If the issue persists, you can create a new profile to check the result.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • CANNOT START OUTLOOK

    I WANT TO START OUTLOOK 2007 BUT IT WONT START.IT SHOW THE MESSAGE-THE CONNECTION TO MICROSOFT EXCHANGE  IS UNAVAILABLE. OUTLOOK MUST BE ONLINE OR CONNECTED TO COMPLETES THIS ACTION.OR
    CANNOT START MICROSOFT OFFICE OUTLOOK. THE FILE C:\USERS\WIN7\APPDATA\LOCAL\MICROSOFT\OUTLOOK\OUTLOOK.OST IS NOT AN OFFLINE FOLDER FILE.

    Hello,
    This issue may occur if the Outlook client computer does not have a default gateway configured. We can work around this problem by adding a DWORD value that is named  DefConnectOpts to the following registry subkey:
    HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC
    For more information, please refer to this KB article:
    http://support.microsoft.com/kb/913843/en-us
    If above doesn't fix the problem, please log into the Exchange Server and make sure the "Microsoft Exchange Address Book" Service was running. See a similar issue discussed here:
    http://social.technet.microsoft.com/Forums/exchange/en-US/5f824d18-b5b3-4f73-bb1a-868c3b80432a/the-action-cannot-be-completed-the-connection-to-microsoft-exchange-is-unavailable-outlook-must-be?forum=exchangesvrclientslegacy
    Regards,
    Steve Fan
    TechNet Community Support

  • CNR 7.01 DHCP server cannot start

    Hi,
    I have problem with my CNR installation. DHCP server cannot be started.
    Bad id or server not loaded is reported error. Also when I try to make some changes that require reload i get this error message:
    Error code 0x8000c003 was returned while executing task ReloadDhcpServer_admin_684405.
    Does anyone get an idea on what happen, or what i made wrong ?
    Regards,
    Srdjan

    all the four machines are four containers in a solaris server.
    The problem was with the hosts file, there were not entries matching the ipaddress and the hotname.
    After i fixed it now i have a stable BI servers and cluster controllers.
    Now i configured the presentation services to connect to the BI servers but i am getting the following exception.
    Type: Error
    Severity: 42
    Time: Thu Aug 6 13:04:02 2009
    File: project/webcomm/socket.cpp Line: 892
    Properties: ThreadID-6
    Location:
    saw.rpc.client.impl.verify
    saw.rpc.client.impl.initFixedRPC
    saw.rpc.client.cluster
    saw.threads
    An error occurred during execution of "connect". Connection refused [Socket:15]
    Any idea?
    thanks

  • Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

    Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
    OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
    and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
    I can log on to the MS Exchange server and see the setup.
    What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
    or programs.
    What can I do?

    The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
    file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
    Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
    was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
    Follow the steps given below to resolve this problem
    1. Recover Navigation Pane configuration file
    2. Repair your Outlook PST file using Inbox Repair tool
    3. Create a new Outlook profil and import data from the old PST file
    4. Turn off Compatibility Mode
    5. Start Outlook in Safe Mode
    For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

  • Urgent: cannot start the shadow instance at phase STARTSAP_TRANS

    We are upgrading to NW2004s (ABAP only) from 640.
    <u><b>How to re-start the shadow instance?</b></u>
    At this point, <b>anyway we cannot start the shadow instance.</b>
    At SAPMMC, the disp+work
    1) first show "running but the dialog queue standstill"
    2) then show" running but not connected to the message server"
    3) then the disp+work dies.
    Above happens in 1 minute after re-start.
    <b>The dev_ms reads:
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 4740] Mon Apr 02 15:07:53 2007
    [Thr 4740] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    94
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2932
    [Thr 4740] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2932) [msxxserv.c   1824]
    [Thr 4740] load acl file = D:\usr\sap\put\XYZ\SYS\global\ms_acl_info.DAT
    [Thr 4740] MsGetOwnIpAddr: my host addresses are :
    [Thr 4740]   1 : [10.10.10.68] houston (HOSTNAME)
    [Thr 4740]   2 : [127.0.0.1] houston.monet.local (LOCALHOST)
    [Thr 4740] Mon Apr 02 15:07:54 2007
    [Thr 4740] MsHttpInit: full qualified hostname = houston.monet.local
    [Thr 4740] HTTP logging is switch off
    [Thr 4740] MsHttpOwnDomain: own domain[1] = monet.local
    [Thr 4740] ms/icf_info_server : deleted
    [Thr 4740] *** I listen to port sapmsSHDXYZ (3660) ***
    [Thr 4740] CUSTOMER KEY: >B0790292062<
    [Thr 4740] Mon Apr 02 15:08:54 2007
    [Thr 4740] *** ERROR => MsSClientHandle: no server provides service ENQ  (4), requested from houston_XYZ_60 [msxxserv.c   4679]
    [Thr 4740] Mon Apr 02 15:19:35 2007
    [Thr 4740] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.10.68) after 300 secs received [msxxserv.c   3165]
    [Thr 4740] *** ERROR => MsSCheckConnections: disconnect now [10.10.10.68] [msxxserv.c   3169]</b>
    The dev_disp reads:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      60
    sid        XYZ
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    95
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        4036
    Mon Apr 02 15:07:53 2007
    kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    length of sys_adm_ext is 360 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (60 4036) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 95 successfully loaded
         shared lib "dw_xtc.dll" version 95 successfully loaded
         shared lib "dw_stl.dll" version 95 successfully loaded
         shared lib "dw_gui.dll" version 95 successfully loaded
         shared lib "dw_mdm.dll" version 95 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Mon Apr 02 15:07:58 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >houston_XYZ_60                         <
    DpShMCreate: sizeof(wp_adm)          19888     (904)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1280)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 05BF0040, size: 4240712)
    DpShMCreate: allocated sys_adm at 05BF0040
    DpShMCreate: allocated wp_adm at 05BF1A28
    DpShMCreate: allocated tm_adm_list at 05BF67D8
    DpShMCreate: allocated tm_adm at 05BF6808
    DpShMCreate: allocated wp_ca_adm at 05F66A98
    DpShMCreate: allocated appc_ca_adm at 05F6B0E8
    DpShMCreate: allocated comm_adm at 05F6C858
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05FED708
    DpShMCreate: allocated gw_adm at 05FED748
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 05FED778
    DpShMCreate: allocated wall_adm at 05FED780
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Memory Reset disabled as NT default
    <ES> 2039 blocks reserved for free list.
    ES initialized.
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12314]
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( houston) [dpxxdisp.c   11663]
    DpStartStopMsg: send start message (myname is >houston_XYZ_60                         <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 95
    Release check o.K.
    Mon Apr 02 15:08:38 2007
    ERROR => W0 (pid 1084) died [dpxxdisp.c   14318]
    ERROR => W1 (pid 4200) died [dpxxdisp.c   14318]
    ERROR => W2 (pid 3316) died [dpxxdisp.c   14318]
    ERROR => W3 (pid 5276) died [dpxxdisp.c   14318]
    ERROR => W4 (pid 5348) died [dpxxdisp.c   14318]
    ERROR => W5 (pid 3436) died [dpxxdisp.c   14318]
    ERROR => W6 (pid 3920) died [dpxxdisp.c   14318]
    ERROR => W7 (pid 4868) died [dpxxdisp.c   14318]
    ERROR => W8 (pid 5380) died [dpxxdisp.c   14318]
    ERROR => W9 (pid 4584) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x1f --> 0x1e
    ERROR => W10 (pid 4188) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x1e --> 0x1c
    ERROR => W11 (pid 2700) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x1c --> 0x18
    ERROR => W12 (pid 4604) died [dpxxdisp.c   14318]
    ERROR => W13 (pid 4916) died [dpxxdisp.c   14318]
    ERROR => W14 (pid 4440) died [dpxxdisp.c   14318]
    ERROR => W15 (pid 4544) died [dpxxdisp.c   14318]
    ERROR => W16 (pid 1888) died [dpxxdisp.c   14318]
    ERROR => W17 (pid 548) died [dpxxdisp.c   14318]
    ERROR => W18 (pid 2800) died [dpxxdisp.c   14318]
    ERROR => W19 (pid 2080) died [dpxxdisp.c   14318]
    ERROR => W20 (pid 2888) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x18 --> 0x10
    ERROR => W21 (pid 5572) died [dpxxdisp.c   14318]
    my types changed after wp death/restart 0x10 --> 0x0
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1609
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Apr 02 15:08:48 2007
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Mon Apr 02 20:08:48 2007
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     1084 Ended         no      1   0             0                                                             
    1 DIA     4200 Ended         no      1   0             0                                                             
    2 DIA     3316 Ended         no      1   0             0                                                             
    3 DIA     5276 Ended         no      1   0             0                                                             
    4 DIA     5348 Ended         no      1   0             0                                                             
    5 DIA     3436 Ended         no      1   0             0                                                             
    6 DIA     3920 Ended         no      1   0             0                                                             
    7 DIA     4868 Ended         no      1   0             0                                                             
    8 DIA     5380 Ended         no      1   0             0                                                             
    9 DIA     4584 Ended         no      1   0             0                                                             
    10 UPD     4188 Ended         no      1   0             0                                                             
    11 ENQ     2700 Ended         no      1   0             0                                                             
    12 BTC     4604 Ended         no      1   0             0                                                             
    13 BTC     4916 Ended         no      1   0             0                                                             
    14 BTC     4440 Ended         no      1   0             0                                                             
    15 BTC     4544 Ended         no      1   0             0                                                             
    16 BTC     1888 Ended         no      1   0             0                                                             
    17 BTC      548 Ended         no      1   0             0                                                             
    18 BTC     2800 Ended         no      1   0             0                                                             
    19 BTC     2080 Ended         no      1   0             0                                                             
    20 BTC     2888 Ended         no      1   0             0                                                             
    21 SPO     5572 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Mon Apr 02 20:08:48 2007
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    1
    2000
    1
    1
    --------++++--
    +
    DIA
    3
    3
    2000
    3
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          7
    wake_evt_udp_now     0
    wake events           total     3,  udp     3 (100%),  shm     0 (  0%)
    since last update     total     3,  udp     3 (100%),  shm     0 (  0%)
    Dump of tm_adm structure:               Mon Apr 02 20:08:48 2007
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Mon Apr 02 20:08:48 2007
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1609
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Apr 02 15:08:53 2007
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >houston_XYZ_60                         < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (2072) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:2072  HANDLE:1580)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1609
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Mon Apr 02 15:08:54 2007
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:2072  HANDLE:1580)
    DpStartStopMsg: send stop message (myname is >houston_XYZ_60                         <)
    NiIMyHostName: hostname = 'houston'
    AdGetSelfIdentRecord: >                                                                           <
    XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    XYZvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Mon Apr 02 15:08:55 2007
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11976]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1488 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1488 (pos=2)
    SiSelNRemove: removed sock 1488
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1488
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 4036) [dpxxdisp.c   10333]
    Good Bye .....
    <b>The dev_w21 reads:
    trc file: "dev_w21", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ

    B Mon Apr 02 15:08:01 2007
    B  create_con (con_name=R/3)
    B  Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
    B  Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
    B  Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.87)
    B  New connection 0 created
    M sysno      60
    M sid        XYZ
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    95
    M intno      20050900
    M make:      multithreaded, ASCII, optimized
    M pid        5572
    M
    M  kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc21 5572) [dpxxdisp.c   1301]

    I Mon Apr 02 15:08:02 2007
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          19888     (904)
    M  DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    M  DpShMCreate: sizeof(comm_adm)          528048     (1048)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (96)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1280)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 063F0040, size: 4240712)
    M  DpShMCreate: allocated sys_adm at 063F0040
    M  DpShMCreate: allocated wp_adm at 063F1A28
    M  DpShMCreate: allocated tm_adm_list at 063F67D8
    M  DpShMCreate: allocated tm_adm at 063F6808
    M  DpShMCreate: allocated wp_ca_adm at 06766A98
    M  DpShMCreate: allocated appc_ca_adm at 0676B0E8
    M  DpShMCreate: allocated comm_adm at 0676C858
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 067ED708
    M  DpShMCreate: allocated gw_adm at 067ED748
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 067ED778
    M  DpShMCreate: allocated wall_adm at 067ED780
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 21 initializing ....
    X  Using implementation view
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host houston

    M Mon Apr 02 15:08:03 2007
    M  calling db_connect ...
    C  Thread ID:4020
    C  Thank You for using the SLOLEDB-interface
    C  Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
    C  dbmssslib.dll patch info
    C    patchlevel   0
    C    patchno      87
    C    patchcomment MSSQL: UTAB/ATAB/Dynp-access via clientside cursor (1002914)
    C  np:(local) connection used on houston
    C  CopyLocalParameters: dbuser is 'XYZ_shd'
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Provider Release:9.00.1399.06
    C  Using Provider SQLNCLI
    C  OpenOledbConnection: MARS property was set successfully.
    C  Can't use MARS (on sql 8.0).  Reconnecting without MARS functionality.
    C  Using Provider SQLNCLI
    C  Provider Release:9.00.1399.06
    C  Using Provider SQLNCLI
    C  CheckCodepageType: line 24329. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
    C  sloledb.cpp [CheckCodepageType,line 24329]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
    C  Procname: [CheckCodepageType -- no proc]
    C  Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 500 dynamic statements (2724000 bytes), total 29444052 bytes
    C  Initializing shared procedure name cache houston_XYZXYZ_XYZ_SHD_MEM.
    C  procedure cache created/attached
    C  PSP: 0 procedure names registered
    C  Connected to db server : [houston] server_used : [np:(local)], dbname: XYZ, dbuser: XYZ
    C  pn_id:houston_XYZXYZ_XYZ_SHD
    C  Not using MARS (on sql 8.0)
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20070402 150803 houston       
    C  The IRow interface is supported by this OLEDB provider
    C  sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
    C  Procname: [##YshoustonXYZ00000055720000000001150803]
    C  sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
    C  Procname: [##YshoustonXYZ00000055720000000001150803]
    C  ParamStmtExec failed.  HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP      1 VERSION FROM SVERS ]
    C  Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112156
    C  DbSlRead - Error 103 (dbcode 208) on open
    C  DbSlRead - <##YshoustonXYZ00000055720000000001150803>
    C  DbSlRead - Error 103 (dbcode 208) on fetch
    C  DbSlRead - <##YshoustonXYZ00000055720000000001150803>
    B  ***LOG BZA=> table SVERS      does not exist on database            [dblink#3 @ 1299] [dblink  1299 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1426]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10240]

    M  Info for wp 21

    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_SPOWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = no VM

    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server houston_XYZ_60 on host houston (wp 21)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Mon Apr 02 15:08:03 2007
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10439
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************

    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc21 5572) [dpnttool.c   327]</b>
    On SDN there are many discussions about similar errors but none
    of them fits our situation.
    Please give your advice. Points will be given.
    Thanks!

    Target SAP system is ADC
    Enter the SAP instance number [59]:
    ? INSTANCE NUMBER   =
    Waiting for input since Mar 22, 2007 1:20:45 PM
    > INSTANCE NUMBER   =  59
    Type of database system is MSS
      >>>>>>>>>> Input Wizard <<<<<<<<<<
    Please enter up to 24 mount points for CDs.
    Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
    ? MOUNT POINT 01 =
    ? MOUNT POINT 02 =
    ? MOUNT POINT 03 =
    ? MOUNT POINT 04 =
    ? MOUNT POINT 05 =
    ? MOUNT POINT 06 =
    Please enter up to 24 mount points for CDs.
    Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
    ? MOUNT POINT 07 =
    ? MOUNT POINT 08 =
    ? MOUNT POINT 09 =
    ? MOUNT POINT 10 =
    ? MOUNT POINT 11 =
    ? MOUNT POINT 12 =
    Please enter up to 24 mount points for CDs.
    Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
    ? MOUNT POINT 13 =
    ? MOUNT POINT 14 =
    ? MOUNT POINT 15 =
    ? MOUNT POINT 16 =
    ? MOUNT POINT 17 =
    ? MOUNT POINT 18 =
    Please enter up to 24 mount points for CDs.
    Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
    ? MOUNT POINT 19 =
    ? MOUNT POINT 20 =
    ? MOUNT POINT 21 =
    ? MOUNT POINT 22 =
    ? MOUNT POINT 23 =
    ? MOUNT POINT 24 =
    Waiting for input since Mar 22, 2007 1:20:49 PM
    > MOUNT POINT 12 =  D:\D12\SAP_CRM_5.0_SR2_Installation_Export
    > MOUNT POINT 23 =  D:\D23\51032247
    > MOUNT POINT 18 =  D:\D18\NW_2004s_SR2_liveCache_7.6.00_Bd._29
    > MOUNT POINT 15 =  D:\D15\NW_2004s_SR2_Upgrade_Master
    > MOUNT POINT 09 =  D:\D9
    > MOUNT POINT 14 =  D:\D14\SAP_CRM_5.0_SR2_Installation_Export
    > MOUNT POINT 01 =  D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export
    > MOUNT POINT 08 =  D:\D8\SAP_CRM_5.0_SR2_Languages
    > MOUNT POINT 20 =  D:\D20\NW_2004s_SR2_Languages
    > MOUNT POINT 03 =  C:\D3\SAP_CRM_5.0_SR2_Upgrade_Export
    > MOUNT POINT 06 =  C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86
    > MOUNT POINT 10 =  D:\D10
    > MOUNT POINT 17 =  D:\D17\51032257
    > MOUNT POINT 21 =  D:\D21\NW_2004s_SR2_Languages
    > MOUNT POINT 19 =  D:\D19\51032257
    > MOUNT POINT 05 =  C:\D5\SAP_CRM_5.0_SR2_Upgrade_Export
    > MOUNT POINT 04 =  C:\D4\SAP_CRM_5.0_SR2_Upgrade_Export
    > MOUNT POINT 11 =  D:\D11\SAP_CRM_5.0_SR2_Installation_Export
    > MOUNT POINT 07 =  D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master
    > MOUNT POINT 24 =  D:\D24
    > MOUNT POINT 02 =  C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export
    > MOUNT POINT 22 =  D:\D22\NW_2004s_SR2_Languages
    > MOUNT POINT 16 =  D:\D16\BS_2005_SR2_SAP_Installation_Master
    > MOUNT POINT 13 =  D:\D13\SAP_CRM_5.0_SR2_Installation_Export
    Reading data from "Upgrade Master CD/DVD"...
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
    Welcome to the SAP upgrade control program.
    Important information for this upgrade is included
    in the upgrade Note and further Notes mentioned therein.
    Refer to the upgrade manual for the number of this note.
    It is advisable to obtain this Note before starting any process
    since it also contains important information about preparing
    the upgrade.
    It is essential that you get a current version of this Note
    before starting the upgrade with SAPup. It contains a keyword
    which is necessary to start the upgrade procedure.
    Please look into the SAP Service Marketplace or, if not available,
    use the form in your packet to request the upgrade Note.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:24:47 PM
    > cancel
    Connection to SAPup  was closed
    Target SAP system is ADC
    Enter the SAP instance number [59]:
    ? INSTANCE NUMBER   =
    Waiting for input since Mar 22, 2007 1:28:34 PM
    > INSTANCE NUMBER   =  59
    Type of database system is MSS
    Reading data from "Upgrade Master CD"...
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
    Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
    Welcome to the SAP upgrade control program.
    Important information for this upgrade is included
    in the upgrade Note and further Notes mentioned therein.
    Refer to the upgrade manual for the number of this note.
    It is advisable to obtain this Note before starting any process
    since it also contains important information about preparing
    the upgrade.
    It is essential that you get a current version of this Note
    before starting the upgrade with SAPup. It contains a keyword
    which is necessary to start the upgrade procedure.
    Please look into the SAP Service Marketplace or, if not available,
    use the form in your packet to request the upgrade Note.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:28:43 PM
    > continue
    SAP  UPGRADE  CONTROL  PROGRAM
    ================================
    This is SAPup version 7.00/2 upgrade to release
            500 of BBPCRM
            2005_1_700 of PI_BASIS
            700 of SAP_ABA
            700 of SAP_AP
            700 of SAP_BASIS
            700 of SAP_BW
            2005_1_700 of ST-PI
    Target SAP system is ADC, MSSQL database
    SAPup started in PREPARE mode.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:28:50 PM
    > continue
    The following options are available:
    select: Display screen for selecting PREPARE modules
    status: Display the statuses of the PREPARE modules
    exit:   Exit PREPARE
    help:   Getting help about PREPARE
    ? select
    ? status
    ? exit
    Waiting for input since Mar 22, 2007 1:28:54 PM
    > select
    Select the PREPARE modules
    ?                             name     status  mandatory
    ?                  Parameter input    initial        yes
    ?                   Initialization    initial        yes
    ?                           Import    initial        yes
    ?                        Extension    initial        yes
    ?                      Integration    initial        yes
    ?                     Installation    initial        yes
    ?                   General checks    initial        yes
    ?                Activation checks    initial        yes
    ? Necessary checks for conversions    initial        yes
    ?  Optional checks for conversions    initial         no
    ?             Modification support    initial         no
    ?                   Pre-processing    initial         no
    Waiting for input since Mar 22, 2007 1:28:56 PM
    >                  Parameter input    initial        yes
    You selected the following PREPARE modules:
    Parameter input
    execute: Execute the selected PREPARE modules.
             Make sure that you have carried out the actions described in
             D:\usr\sap\put\log\CHECKS.LOG before continuing.
             (Note: The contents of file CHECKS.LOG are saved
              in D:\usr\sap\put\log\CHECKS.SAV)
    select:  Display screen for selecting PREPARE modules.
    exit:    Exit PREPARE.
    help:    Getting help about PREPARE modules.
    ? execute
    ? select
    ? exit
    Waiting for input since Mar 22, 2007 1:28:59 PM
    > execute
    Execution of PREPARE module Parameter input begins at 20070322142901
    >> 14:29:01  PREPARE: START OF PHASE BEGIN_PRE
    Generating html phase list files 'phase_toc.html' and 'phaselist.html'
    >> 14:29:01  PREPARE: END OF PHASE   BEGIN_PRE
    >> 14:29:01  PREPARE: START OF PHASE KEY_CHK
    Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
    Archive successfully unpacked.
    Enter the SAPup keyword of note 961511
    ? SAPup keyword =
    Waiting for input since Mar 22, 2007 1:29:02 PM
    > SAPup keyword = 19327784
    >> 14:37:23  PREPARE: END OF PHASE   KEY_CHK
    >> 14:37:23  PREPARE: START OF PHASE EXTRACTKRN_PRE
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exe" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exe.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exe" ...
    Done.
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exe" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exe.
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exe" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exe.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exe" ...
    Done.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exe" ...
    Done.
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exenew" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exenew.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exenew" ...
    Done.
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exenew" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exenew.
    Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exenew" ...
    Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exenew.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exenew" ...
    Done.
    Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exenew" ...
    Done.
    >> 14:40:10  PREPARE: END OF PHASE   EXTRACTKRN_PRE
    >> 14:40:10  PREPARE: START OF PHASE INITPUT_PRE
    Supply the following information:
    Confirm the name of your SAP system:
    ? SAP SYSTEM ID     =
    The hostname of your central SAP server:
    ? SAP SYSTEM HOST   =
    Enter the SAP instance number:
    ? INSTANCE NUMBER   =
    Waiting for input since Mar 22, 2007 1:40:10 PM
    > INSTANCE NUMBER   =  59
    > SAP SYSTEM HOST   =  damascus
    > SAP SYSTEM ID     =  ADC
    The system identifier of your database:
    ? DATABASE ID       =
    The hostname of your database server:
    ? DATABASE HOST     =
    Waiting for input since Mar 22, 2007 1:43:59 PM
    > DATABASE HOST     =  damascus
    > DATABASE ID       =  ADC
    Executing script MSSCONCHECK ...
    Supply the following information:
    The password for SAP user DDIC in client 000
    (may be 19920706):
    ? DDIC PASSWORD  =
    Verify password for SAP user DDIC:
    ? DDIC PASSWORD  =
    Waiting for input since Mar 22, 2007 1:44:03 PM
    > DDIC PASSWORD  =  <hidden input>
    > DDIC PASSWORD  =  <hidden input>
    The hostname of your batch server:
    ? BATCH HOST        =
    Waiting for input since Mar 22, 2007 1:44:14 PM
    > BATCH HOST        =  damascus
    Supply the following information:
    The maximum number of parallel processes during uptime:
    ? MAXIMUM UPTIME PROCESSES =
    The number of parallel import processes:
    ? R3TRANS PROCESSES =
    The maximum profile value of "bufreftime":
    ? MAXIMUM SYNC TIME =
    Waiting for input since Mar 22, 2007 1:44:16 PM
    > R3TRANS PROCESSES =  3
    > MAXIMUM SYNC TIME =  120
    > MAXIMUM UPTIME PROCESSES =  1
    The password for Operating System account .\SAPServiceADC:
    ? PASSWORD  =
    Verification of the password for Operating System account .\SAPServiceADC:
    ? PASSWORD  =
    Waiting for input since Mar 22, 2007 1:44:19 PM
    > PASSWORD  =  <hidden input>
    > PASSWORD  =  <hidden input>
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    Executing script MSSUPGSPS ...
    Executing script MSSINCHK ...
    >> 14:44:43  PREPARE: END OF PHASE   INITPUT_PRE
    >> 14:44:43  PREPARE: START OF PHASE DBCHK_PRE
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    Is there more than one system running in this database?
    (MCOD: Multiple components in one database)
    ? no
    ? yes
    Waiting for input since Mar 22, 2007 1:44:45 PM
    > no
    >> 14:44:49  PREPARE: END OF PHASE   DBCHK_PRE
    >> 14:44:49  PREPARE: START OF PHASE CONFCHK_IMP
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    >> 14:44:50  PREPARE: END OF PHASE   CONFCHK_IMP
    >> 14:44:50  PREPARE: START OF PHASE SOLMAN_CHK
    The SAP Solution Manager Key is required for the upgrade.
    Further informations can be found in the upgrade guide,
    the SAP Service Marketplace and SAP note 805390!
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:44:50 PM
    > continue
    ? SAP Solution Manager Key =
    Waiting for input since Mar 22, 2007 1:44:53 PM
    > SAP Solution Manager Key = 12D8B10981
    >> 14:45:14  PREPARE: END OF PHASE   SOLMAN_CHK
    >> 14:45:14  PREPARE: START OF PHASE CHKSYSTYPE
    >> 14:45:14  PREPARE: END OF PHASE   CHKSYSTYPE
    >> 14:45:14  PREPARE: START OF PHASE HIAV_CHK
    >> 14:45:14  PREPARE: END OF PHASE   HIAV_CHK
    >> 14:45:15  PREPARE: START OF PHASE J2EE_CHK1
    >> 14:45:15  PREPARE: END OF PHASE   J2EE_CHK1
    >> 14:45:15  PREPARE: START OF PHASE REQ_J2EEUPG
    >> 14:45:15  PREPARE: END OF PHASE   REQ_J2EEUPG
    >> 14:45:15  PREPARE: START OF PHASE SETSYNC_PREP_STARTED
    >> 14:45:15  PREPARE: END OF PHASE   SETSYNC_PREP_STARTED
    >> 14:45:15  PREPARE: START OF PHASE REQ_READNOTE
    >> 14:45:15  PREPARE: END OF PHASE   REQ_READNOTE
    >> 14:45:15  PREPARE: START OF PHASE INIT_CBU
    >> 14:45:15  PREPARE: END OF PHASE   INIT_CBU
    >> 14:45:15  PREPARE: START OF PHASE CHECKGROUP_END0
    Execution of PREPARE module Parameter input ends at 20070322144515
    Execution of the selected PREPARE modules finished
    with the statuses as follows:
    'Parameter input'  status: succeeded
    Please see file D:\usr\sap\put\log\CHECKS.LOG
    for the actions which have to be performed.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:45:15 PM
    > continue
    The following options are available:
    select: Display screen for selecting PREPARE modules
    status: Display the statuses of the PREPARE modules
    exit:   Exit PREPARE
    help:   Getting help about PREPARE
    ? select
    ? status
    ? exit
    Waiting for input since Mar 22, 2007 1:45:23 PM
    > select
    Select the PREPARE modules
    ?                             name     status  mandatory
    ?                  Parameter input  succeeded        yes
    ?                   Initialization    initial        yes
    ?                           Import    initial        yes
    ?                        Extension    initial        yes
    ?                      Integration    initial        yes
    ?                     Installation    initial        yes
    ?                   General checks    initial        yes
    ?                Activation checks    initial        yes
    ? Necessary checks for conversions    initial        yes
    ?  Optional checks for conversions    initial         no
    ?             Modification support    initial         no
    ?                   Pre-processing    initial         no
    Waiting for input since Mar 22, 2007 1:45:26 PM
    >                   Initialization    initial        yes
    You selected the following PREPARE modules:
    Initialization
    execute: Execute the selected PREPARE modules.
             Make sure that you have carried out the actions described in
             D:\usr\sap\put\log\CHECKS.LOG before continuing.
             (Note: The contents of file CHECKS.LOG are saved
              in D:\usr\sap\put\log\CHECKS.SAV)
    select:  Display screen for selecting PREPARE modules.
    exit:    Exit PREPARE.
    help:    Getting help about PREPARE modules.
    ? execute
    ? select
    ? exit
    ? display CHECKS.LOG
    Waiting for input since Mar 22, 2007 1:45:30 PM
    > execute
    Execution of PREPARE module Initialization begins at 20070322144532
    >> 14:45:32  PREPARE: START OF PHASE INITCURENV
    >> 14:45:32  PREPARE: END OF PHASE   INITCURENV
    >> 14:45:32  PREPARE: START OF PHASE DBCHK_INI
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
    >> 14:45:34  PREPARE: END OF PHASE   DBCHK_INI
    >> 14:45:34  PREPARE: START OF PHASE RFCCHK_INI
    >> 14:45:34  PREPARE: END OF PHASE   RFCCHK_INI
    >> 14:45:34  PREPARE: START OF PHASE VERSCHK_INI
    >> 14:45:34  PREPARE: END OF PHASE   VERSCHK_INI
    >> 14:45:34  PREPARE: START OF PHASE VALCHK_INI
    >> 14:45:35  PREPARE: END OF PHASE   VALCHK_INI
    >> 14:45:35  PREPARE: START OF PHASE TOOLVERSION_INI
    >> 14:45:36  PREPARE: END OF PHASE   TOOLVERSION_INI
    >> 14:45:36  PREPARE: START OF PHASE UNICODE_CHK_PRE
    >> 14:45:36  PREPARE: END OF PHASE   UNICODE_CHK_PRE
    >> 14:45:36  PREPARE: START OF PHASE TOOLVERSION_UPG1
    >> 14:46:00  PREPARE: END OF PHASE   TOOLVERSION_UPG1
    >> 14:46:00  PREPARE: START OF PHASE DBCONNCHK_INI
    Checking DB connect with 'D:\usr\sap\put\exe\R3trans.exe'.
    >> 14:46:00  PREPARE: END OF PHASE   DBCONNCHK_INI
    >> 14:46:00  PREPARE: START OF PHASE SETSYNC_INFO_FINISHED
    >> 14:46:00  PREPARE: END OF PHASE   SETSYNC_INFO_FINISHED
    >> 14:46:00  PREPARE: START OF PHASE UCMIG_DECISION
    Your system is configured as a non-Unicode SCP (Single Code Page) configuration.
    If you plan to perform a Unicode Conversion after the upgrade, you may choose to perform a combined
    Upgrade and Unicode Conversion.
    In this case, several of the migration preparation steps can be done already on the start release
    or on the upgrade shadow system.
    For further information, please refer to OSS note 928729.
    Do you want to perform a combined Upgrade and Unicode Conversion?
    ? Yes
    ? No
    Waiting for input since Mar 22, 2007 1:46:06 PM
    > No
    >> 14:48:04  PREPARE: END OF PHASE   UCMIG_DECISION
    >> 14:48:04  PREPARE: START OF PHASE CLNT_CHK_INI
    >> 14:48:09  PREPARE: END OF PHASE   CLNT_CHK_INI
    >> 14:48:09  PREPARE: START OF PHASE PATCH_CHK1
    >> 14:48:15  PREPARE: END OF PHASE   PATCH_CHK1
    >> 14:48:15  PREPARE: START OF PHASE INTCHK_INI
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxttent ADC
    running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxtfent ADC
    >> 14:48:15  PREPARE: END OF PHASE   INTCHK_INI
    >> 14:48:15  PREPARE: START OF PHASE ADJ_CNTRANS
    Calling R3trans to import 'RSUPDTEC.60X'.
    Waiting 130 seconds for buffer synchronization ...
    working ...
    >> 14:50:38  PREPARE: END OF PHASE   ADJ_CNTRANS
    >> 14:50:38  PREPARE: START OF PHASE INIT_CNTRANS
    >> 14:50:38  PREPARE: END OF PHASE   INIT_CNTRANS
    >> 14:50:38  PREPARE: START OF PHASE CNTRANS_PRE
    >> 14:50:38  PREPARE: END OF PHASE   CNTRANS_PRE
    >> 14:50:38  PREPARE: START OF PHASE DMPSPC_INI
    >> 14:50:38  PREPARE: END OF PHASE   DMPSPC_INI
    >> 14:50:38  PREPARE: START OF PHASE JOB_RSDB4090
    >> 14:50:38  PREPARE: END OF PHASE   JOB_RSDB4090
    >> 14:50:38  PREPARE: START OF PHASE CHK_DB6_REG_PRE
    >> 14:50:38  PREPARE: END OF PHASE   CHK_DB6_REG_PRE
    >> 14:50:39  PREPARE: START OF PHASE CHK_DB6_PAR_INI
    >> 14:50:39  PREPARE: END OF PHASE   CHK_DB6_PAR_INI
    >> 14:50:39  PREPARE: START OF PHASE SPACECHK_INI
    Executing script MSSSPACE ...
    >> 14:50:39  PREPARE: END OF PHASE   SPACECHK_INI
    >> 14:50:39  PREPARE: START OF PHASE KRNCHK_DEST
    >> 14:50:39  PREPARE: END OF PHASE   KRNCHK_DEST
    >> 14:50:39  PREPARE: START OF PHASE DBPREP_CHK
    >> 14:50:39  PREPARE: END OF PHASE   DBPREP_CHK
    >> 14:50:39  PREPARE: START OF PHASE EXECCV
    >> 14:50:44  PREPARE: END OF PHASE   EXECCV
    >> 14:50:44  PREPARE: START OF PHASE EXECAV
    >> 14:50:50  PREPARE: END OF PHASE   EXECAV
    >> 14:50:50  PREPARE: START OF PHASE COMPINFO_INI
    >> 14:50:50  PREPARE: END OF PHASE   COMPINFO_INI
    >> 14:50:50  PREPARE: START OF PHASE ADDON_CHK
    >> 14:50:50  PREPARE: END OF PHASE   ADDON_CHK
    >> 14:50:50  PREPARE: START OF PHASE ADDON_INFO
    >> 14:50:50  PREPARE: END OF PHASE   ADDON_INFO
    >> 14:50:50  PREPARE: START OF PHASE ADDON_SPEC1
    >> 14:50:55  PREPARE: END OF PHASE   ADDON_SPEC1
    >> 14:50:56  PREPARE: START OF PHASE ADDON_TREAS
    >> 14:50:56  PREPARE: END OF PHASE   ADDON_TREAS
    >> 14:50:56  PREPARE: START OF PHASE ADDON_WFM
    >> 14:51:01  PREPARE: END OF PHASE   ADDON_WFM
    >> 14:51:01  PREPARE: START OF PHASE ADDON_DMC
    >> 14:51:01  PREPARE: END OF PHASE   ADDON_DMC
    >> 14:51:01  PREPARE: START OF PHASE ACE_CHK
    >> 14:51:01  PREPARE: END OF PHASE   ACE_CHK
    >> 14:51:02  PREPARE: START OF PHASE CRM_BILL
    >> 14:51:02  PREPARE: END OF PHASE   CRM_BILL
    >> 14:51:02  PREPARE: START OF PHASE PR_DBPAR
    >> 14:51:02  PREPARE: END OF PHASE   PR_DBPAR
    >> 14:51:02  PREPARE: START OF PHASE CHECKGROUP_END1
    Execution of PREPARE module Initialization ends at 20070322145102
    Execution of the selected PREPARE modules finished
    with the statuses as follows:
    'Initialization'  status: succeeded
    Please see file D:\usr\sap\put\log\CHECKS.LOG
    for the actions which have to be performed.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:51:02 PM
    > continue
    The following options are available:
    select: Display screen for selecting PREPARE modules
    status: Display the statuses of the PREPARE modules
    exit:   Exit PREPARE
    help:   Getting help about PREPARE
    ? select
    ? status
    ? exit
    Waiting for input since Mar 22, 2007 1:51:41 PM
    > continue
    Select the PREPARE modules
    ?                             name     status  mandatory
    ?                  Parameter input  succeeded        yes
    ?                   Initialization  succeeded        yes
    ?                           Import    initial        yes
    ?                        Extension    initial        yes
    ?                      Integration    initial        yes
    ?                     Installation    initial        yes
    ?                   General checks    initial        yes
    ?                Activation checks    initial        yes
    ? Necessary checks for conversions    initial        yes
    ?  Optional checks for conversions    initial         no
    ?             Modification support    initial         no
    ?                   Pre-processing    initial         no
    Waiting for input since Mar 22, 2007 1:51:41 PM
    SAP  UPGRADE  CONTROL  PROGRAM
    ================================
    This is SAPup version 7.00/2 upgrade to release
            500 of BBPCRM
            2005_1_700 of PI_BASIS
            700 of SAP_ABA
            700 of SAP_AP
            700 of SAP_BASIS
            700 of SAP_BW
            2005_1_700 of ST-PI
    Target SAP system is ADC, MSSQL database
    SAPup started in PREPARE mode.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:58:46 PM
    > continue
    The following options are available:
    select: Display screen for selecting PREPARE modules
    status: Display the statuses of the PREPARE modules
    exit:   Exit PREPARE
    help:   Getting help about PREPARE
    ? select
    ? status
    ? exit
    Waiting for input since Mar 22, 2007 1:58:53 PM
    > select
    Select the PREPARE modules
    ?                             name     status  mandatory
    ?                  Parameter input  succeeded        yes
    ?                   Initialization  succeeded        yes
    ?                           Import    initial        yes
    ?                        Extension    initial        yes
    ?                      Integration    initial        yes
    ?                     Installation    initial        yes
    ?                   General checks    initial        yes
    ?                Activation checks    initial        yes
    ? Necessary checks for conversions    initial        yes
    ?  Optional checks for conversions    initial         no
    ?             Modification support    initial         no
    ?                   Pre-processing    initial         no
    Waiting for input since Mar 22, 2007 1:58:56 PM
    >                           Import    initial        yes
    You selected the following PREPARE modules:
    Import
    execute: Execute the selected PREPARE modules.
             Make sure that you have carried out the actions described in
             D:\usr\sap\put\log\CHECKS.LOG before continuing.
             (Note: The contents of file CHECKS.LOG are saved
              in D:\usr\sap\put\log\CHECKS.SAV)
    select:  Display screen for selecting PREPARE modules.
    exit:    Exit PREPARE.
    help:    Getting help about PREPARE modules.
    ? execute
    ? select
    ? exit
    ? display CHECKS.LOG
    Waiting for input since Mar 22, 2007 1:59:00 PM
    > execute
    Execution of PREPARE module Import begins at 20070322145902
    >> 14:59:02  PREPARE: START OF PHASE REQIMPORT
           The PREPARE module Import will be started now.
    During this module programs, structures, and table entries
    required by PREPARE are imported (the socalled "tool import").
    Note: This can cause a loss of performance in R/3
    In rare cases, a concurrent transport via the transport directory
    may disturb the tool import. Please avoid any concurrent import
    during this PREPARE module.
    ? continue
    ? cancel
    Waiting for input since Mar 22, 2007 1:59:02 PM
    > continue
    >> 14:59:05  PREPARE: END OF PHASE   REQIMPORT
    >> 14:59:05  PREPARE: START OF PHASE READDATA
    Trying to find archive files ...
    Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR" to "D:\usr\sap\put" ...
    Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR" to "D:\usr\sap\put" ...
    Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR successfully unpacked to D:\usr\sap\put.
    Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR" to "D:\usr\sap\put" ...
    Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR successfully unpacked to D:\usr\sap\put.
    Trying to find archive files ...
    Extracting archive "C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR" to "D:\usr\sap\put" ...
    Archive C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR successfully unpacked to D:\usr\sap\put.
    >> 14:59:40  PREPARE: END OF PHASE   READDATA
    >> 14:59:40  PREPARE: START OF PHASE READDATA_EXT
    Trying to find archive files ...
    >> 14:59:41  PREPARE: END OF PHASE   READDATA_EXT
    >> 14:59:41  PREPARE: START OF PHASE TOOLFIX_CHK
    Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
    Archive successfully unpacked.
    >> 14:59:42  PREPARE: END OF PHASE   TOOLFIX_CHK
    >> 14:59:42  PREPARE: START OF PHASE CPYFIL0_CBU
    >> 14:59:42  PREPARE: END OF P

  • Cannot start second instance of collector

    Hi everyone
    I've got a strange one here. A workstation I noticed that wasn't scanned since 6 months (WinXP SP3, ZCM 10.3.1).
    When I check the ZAA windows, it says Last Scanned i.e. today, Last Upload June 2.
    I've found several errors 'Cannot start second instance of collector' in the local colw32.log.
    However, the workstation gets rebooted daily and I can't find another instance of colw32.exe running in TaskManager.
    How can I resolve this? I can't tell how many clients are affected. However, I've got almost 300 clients (15%) that haven't been scanned in the last 180 days...
    Thanks
    Roland

    Originally Posted by rpfenninger
    Hi everyone
    I've got a strange one here. A workstation I noticed that wasn't scanned since 6 months (WinXP SP3, ZCM 10.3.1).
    When I check the ZAA windows, it says Last Scanned i.e. today, Last Upload June 2.
    I've found several errors 'Cannot start second instance of collector' in the local colw32.log.
    However, the workstation gets rebooted daily and I can't find another instance of colw32.exe running in TaskManager.
    How can I resolve this? I can't tell how many clients are affected. However, I've got almost 300 clients (15%) that haven't been scanned in the last 180 days...
    Thanks
    Roland
    We had similar issue, inventory was never uploaded to server. To solve it we had to manually do a "Scan Now" from Zenworks agent -> Show properties -> Inventory -> Scan Now, after we did that once on the workstation then scheduled scans started to upload again.
    I guess it would probably also work if you do a Inventory scan from quick tasks in ZCC but I never tried it so I'm not sure.
    Thomas

  • Cannot start SQL Server Agent (Version 2014 enterprise core)?

    The SQL Server Agent log file has the following information. I already set the firewall for inbound 1433.
    2014-11-04 11:59:43 - ? [100] Microsoft SQLServerAgent version 12.0.2000.8 (X64 unicode retail build) : Process ID 6108
    2014-11-04 11:59:43 - ? [495] The SQL Server Agent startup service account is ......
    2014-11-04 11:59:43 - ! [150] SQL Server does not accept the connection (error: 0). Waiting for Sql Server to allow connections. Operation attempted was: Verify Connection On Start.
    2014-11-04 11:59:43 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
    2014-11-04 11:59:43 - ! [298] SQLServer Error: 27, Registry information is corrupt or missing. Make sure the provider is installed and registered correctly. [SQLSTATE 08001]
    2014-11-04 11:59:43 - ! [298] SQLServer Error: 27, Client unable to establish connection [SQLSTATE 08001]
    2014-11-04 11:59:43 - ! [165] ODBC Error: 0, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to
    allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
    2014-11-04 11:59:43 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
    2014-11-04 11:59:43 - ? [098] SQLServerAgent terminated (normally

    Is this new SQL Server installation or originally it was working fine ?
    Below message makes me think you might as well need to repair your installation
    >SQLServer Error: 27, Registry information is corrupt or missing. Make sure the provider is installed and registered correctly. [SQLSTATE 08001]
    Please see below  link
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/d2a97cf4-54b2-40b7-836a-b9f146442855/unable-to-open-sql-server-logs?forum=sqlsetupandupgrade
    Without errorlog it would be difficult to say why this happened but as errorlog says it has found registry inconsistent so repairing installation would help
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Cannot start BI server, cannot start cluster successfully, core dumped

    Hi
    I have the following configuration. The four machines are virtualized containers on solaris sparc
    machine 1 - PS, java host, web logic
    machine 2 - PS, java host, web logic
    machine 3 - bi server, primary cluster controller, scheduler
    machine 4 - bi server, secondary cluster controller, scheduler
    However i dont need the scheduler and i have not configured them completely
    I was able to successfully test on compete stack with no clustering and used only machines 1 and 3. I was able to login to the sample URL and see some graphs.
    The problem started once i was trying the clustering. I looked at the admin docs and the installation and deployment guides and followed the instructions and carefully did the configuration.
    I face multiple problems.
    In single stack some time the BI server was randoly stopping itself for no reason after starting it. it was very random that i used to feel happy if it does not stop.
    During clustering i was not able to start the cluster successfully at all. I did not want to worry about scheduler to start with and even the PS. I just wanted to connect to the BI server using the primary ccs and using the admin tool in the windows machine.
    Today morning i tried to start the BI server and then there was a core dump in both the machines and then i am not even able to start the server at all. There was nothing in the log files and i dont know what to do.
    The log files before the core dump as follows.
    server log file
    2009-07-30 18:18:47
    [36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
    2009-07-30 18:18:49
    [14055] Loading subject area: Sample Sales ...
    2009-07-30 18:18:49
    [14056] Finished loading subject area: Sample Sales.
    2009-07-30 18:18:49
    [58002] Query Cache loaded with 7 entries from saved cache files.
    2009-07-30 18:18:49
    [43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
    2009-07-30 18:19:11
    [43031] : Oracle BI Server shutdown.
    2009-07-30 18:19:12
    [58001] Query Cache Statistics -- Hits:0(0%), Qualified Misses:0(0%), Unqualified Misses:0(0%).
    2009-07-30 18:19:12
    [14058] Unloaded all subject areas.
    2009-07-30 18:25:25
    [36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
    2009-07-30 18:25:27
    [14055] Loading subject area: Sample Sales ...
    2009-07-30 18:25:27
    [14056] Finished loading subject area: Sample Sales.
    2009-07-30 18:25:27
    [58002] Query Cache loaded with 7 entries from saved cache files.
    2009-07-30 18:25:27
    [43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
    2009-07-30 18:26:25
    [43071] A connection with Cluster Controller maa-zone4:9706 was established.
    2009-07-30 18:30:08
    [nQSError: 12002] Socket communication error at call=recv: (Number=131) Connection reset by peer
    2009-07-30 18:30:08
    [nQSError: 12002] Socket communication error at call=recv: (Number=131) Connection reset by peer
    2009-07-30 20:57:24
    [36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
    2009-07-30 20:57:26
    [14055] Loading subject area: Sample Sales ...
    2009-07-30 20:57:26
    [14056] Finished loading subject area: Sample Sales.
    2009-07-30 20:57:26
    [58002] Query Cache loaded with 7 entries from saved cache files.
    2009-07-30 20:57:26
    [43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
    2009-07-30 20:58:39
    [43031] : Oracle BI Server shutdown.
    2009-07-30 20:58:39
    [58001] Query Cache Statistics -- Hits:0(0%), Qualified Misses:0(0%), Unqualified Misses:0(0%).
    2009-07-30 20:58:39
    [14058] Unloaded all subject areas.
    2009-07-30 21:01:40
    [36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
    2009-07-30 21:01:42
    [14055] Loading subject area: Sample Sales ...
    2009-07-30 21:01:42
    [14056] Finished loading subject area: Sample Sales.
    2009-07-30 21:01:42
    [58002] Query Cache loaded with 7 entries from saved cache files.
    2009-07-30 21:01:42
    [43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
    2009-07-30 21:08:51
    [43071] A connection with Cluster Controller maa-zone4:9706 was established.
    2009-07-30 21:10:31
    [43065] The connection with Cluster Controller maa-zone4:9706 was lost.
    2009-07-30 21:12:59
    [43071] A connection with Cluster Controller maa-zone4:9706 was established.
    :x
    $ ls
    cluster controller log file
    2009-07-30 21:12:59
    [71008] Cluster Controller started. Version: 10.1.3.4.1.090414.1900
    2009-07-30 21:12:59
    [71021] An attempt to establish a connection with Oracle BI Server maa-zone03:9703 failed.
    2009-07-30 21:12:59
    [71020] A connection with Oracle BI Server maa-zone4:9703 was established.
    2009-07-30 21:12:59
    [71010] Oracle BI Server maa-zone4:9703 has transitioned to ONLINE state.
    2009-07-30 21:13:14
    [71050] This Cluster Controller is promoted to Controlling because there has been no recent contact from
    the Primary Cluster Controller.
    2009-07-30 21:13:14
    [71071] An attempt to establish a connection with Oracle BI Scheduler maa-zone03:9705 failed.
    2009-07-30 21:13:14
    [71068] Oracle BI Scheduler maa-zone03:9705 has transitioned to OFFLINE state.
    2009-07-30 21:13:14
    [71071] An attempt to establish a connection with Oracle BI Scheduler maa-zone4:9705 failed.
    2009-07-30 21:13:14
    [71068] Oracle BI Scheduler maa-zone4:9705 has transitioned to OFFLINE state.
    2009-07-30 23:10:34
    [71019] The connection with Oracle BI Server maa-zone4:9703 was lost.
    2009-07-30 23:10:34
    [71011] Oracle BI Server maa-zone4:9703 has transitioned to OFFLINE state.
    2009-07-30 23:10:39
    [71021] An attempt to establish a connection with Oracle BI Server maa-zone4:9703 failed.
    your help is appreciated.
    thanks
    chaitanya kadaru

    all the four machines are four containers in a solaris server.
    The problem was with the hosts file, there were not entries matching the ipaddress and the hotname.
    After i fixed it now i have a stable BI servers and cluster controllers.
    Now i configured the presentation services to connect to the BI servers but i am getting the following exception.
    Type: Error
    Severity: 42
    Time: Thu Aug 6 13:04:02 2009
    File: project/webcomm/socket.cpp Line: 892
    Properties: ThreadID-6
    Location:
    saw.rpc.client.impl.verify
    saw.rpc.client.impl.initFixedRPC
    saw.rpc.client.cluster
    saw.threads
    An error occurred during execution of "connect". Connection refused [Socket:15]
    Any idea?
    thanks

  • Cannot start Enterprise Manager for Fusion Middleware 11g

    Dear all,
    Because I want to install Oracle EGRCM v8.0.1 in Linux x86_64, so I installed Oracle Weblogic 11gR1 and SOA Suite 11g first.
    After installation successfully, I created a base_domain as default, and can start weblogic administration server ( http://localhost:7001/console ) successfully.
    Now I want to use Enterprise Manager for Fusion Middleware 11g. Per "*Oracle® Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)*", the EM should be available now and the access URL should be http://localhost:7001/em . But when I try to access it, the following error returned:
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    +10.4.5 404 Not Found+
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    So I try to start with emctl in *$MW_HOME/oracle_common/bin/*, the error is as following:
    +./emctl: line 387 /d02/Middleware/oracle_common/perl/bin/perl: No such file or directory+.
    I check the path and find out that no directory named "perl" under */d02/Middleware/oracle_common*. So I try to copy the necessary dir from the dir installed Oracle Database 11g ( *$ORACLE_HOME* ), but it returns following error:
    OC4J Configuration issue. /d02/Middleware/oracle_common/sysman/j2ee not found.
    I try to copy necessary dir from *$ORACLE_HOME* but still cannot start EM.
    Please give some advise about how I can start EM for Fusion Middleware 11g, any idea is appreciate!
    Best Regards,
    Kenny Wang

    Ravi Jegga wrote:
    Hi Kenny
    See this post of mine: Re: Fusion Middleware Console
    For any SOA Domain, unless you have Enterprise Manager Facet enabled (during domain creation process or adding later on by extending it), you will not be able to access the EM Console. For quick testing, open config.xml file for your domain and check the modules specially em module as shown below. It should be there. This is for one of my SOA Cluster Domains with SOA on top of WLS 10.3.2
    <app-deployment>
    <name>em</name>
    <target>AdminServer</target>
    <module-type>ear</module-type>
    <source-path>C:\beawls1032\user_projects\applications\soaDomainCluster1/em.ear</source-path>
    <deployment-order>400</deployment-order>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
    </app-deployment>
    Thanks
    Ravi JeggaHello Ravi:
    I too like Kenny experienced the EXACT same thing this morning. I was trying to figure out how to modify the formsweb.cfg and I remembered from when I install Oracle9i/10g AS a few years back, that it was on the Enterprise Manager Console for forms (different than the EM for the database). Well that's different than the consoles for Weblogic Server and Weblogic Server for Forms. I ran into the same errors Kenny did, and I followed your steps except that I did install into the domain the Enterprise Manager so when I looked at the config.xml I do see the same code that you posted above. Yet I still get the error when accessing
    http://computer:7001/em
    Also when trying to run emctl (I copied the perl directory from the database) and same error as Kenny. Any tips/clues?
    I'm running on Red Hat Enterprise Linux 5, Oracle 11g (database, Fusion Middleware).
    Thanks,
    Gio

  • RPC Client Access Logs - Throttling Policy

    Trying to get useful information on who is being throttled by a specific policy.
    Created the policy: New-ThrottlingPolicy -Name LimitMessagesSent -RecipientRateLimit 5 -ThrottlingPolicyScope Organization
    Enabled RPC Client access logging: <add key="LoggingTag" value="ConnectDisconnect, Logon, Failures, ApplicationData, Warnings, Throttling" /> and bounced the service.
    Forced the throttling by sending many emails.
    Opened the log and found this:
    2014-07-23T21:24:28.820Z,40,1,/o=Exch/ou=Monitoring Mailboxes/cn=Recipients/cn=HealthMailbox872ac0efb9c44ddf9d0d1d4f0e4dbb55,,Microsoft.Exchange.RpcClientAccess.Monitoring.dll,15.0.0.0,Cached,,,,ncacn_http,Client=Microsoft.Exchange.RpcClientAccess.Monitoring,,,,,00:00:00.0160000,"BS=Owner:Sid~CAMPUS\SM_6f8aaf3f77f94192a~Rca~false,Conn:1,MaxConn:40,MaxBurst:150000,Balance:149988.3,Cutoff:Unlimited,RechargeRate:900000,Policy:LimitMessagesSent,IsServiceAccount:False,LiveTime:00:02:00.0650494",,,
    Makes no mention of the user that was throttled. How can I troubleshoot if I cannot see the user in the logs?
    Thanks.

    Hi 
    We need to assign this newly created throttling policy to the end users else it will not be effective.
    The below commands will help you out.
    Use below command to assign this newly created throttling policy to the user
    Set-Mailbox MBXName -ThrottlingPolicy LimitMessagesSent 
    Run the below command to ensure that the throttling policy is assigned 
    Get-Mailbox MBXName | Select Throttling Policy
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

  • Cannot start embedded oc4j

    I just installed oracle 9.0.2 on rh linux 8.0 - no problems.
    I installed jdev 9.03 and seems to work. However I cannot start the embedded oc4j server to test a quick jsp page. I get the following error:
    IllegalArgumentException: Signal already used by VM
    Any ideas how to fix this? Thanks!!!!
    details:
    [Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
    /oracle/product/9.2.0.1.0/jdk/bin/java -client -classpath /jdev/j2ee/home/oc4j.jar -Xverify:none -Doracle.j2ee.dont.use.memory.archive=true -Xrs com.evermind.server.OC4JServer -config /home/tom/jdevhome/system9.0.3.1035/oc4j-config/server.xml
    [waiting for the server to complete its initialization...]
    java.lang.reflect.InvocationTargetException: java.lang.IllegalArgumentException: Signal already used by VM: SIGHUP
         at sun.misc.Signal.handle(Signal.java:152)

    JDeveloper skips the scan of ports less than 1024, as they need root user access in Unix platforms. I have filed an Enhancement request for the next release of JDeveloper to make it scan for port less than 1024 .
    raghu
    JDev Team

Maybe you are looking for

  • How to use Sonos as wireless speakers for a Mac...

    Here's a solution I just tried, and found that actually works!   I've listed it as an *idea* because I would assume that SONOS might be able to offer a similar solution, unless (of course) licensing issues prevent them from doing it without permissio

  • Trying to explain to a sighted person what I'm seeing

                   Hi all, I posted here last week about a problem where my charts were not loading in the iTunes Store on the phone, I think I posted that in the iTunes Store section of this site. I called Apple that night and have been working with Nic

  • Create Business Partner-FPP1-issue with grouping

    HI I am trying to create business partner using FPP1 transaction with my own grouping but i am getting error. error "You cant create a customer with grouping PS05'. here PS05 is my own grouping with number range defined. please check the attached scr

  • Change background color - Integration Builder and others

    Hello all, Does anyone know how to change the background color displayed in the Integration Builder and other Java stack components of XI? We have a company policy that each different landscape (Dev, QA, Prod, etc) has a different background color in

  • No Firewire Video

    I'm running FCP 4.5 in 10.43 on dual G4. When trying to capture dv from a Sony DSR-1800 I can control the deck thru firewire, but there's no video or audio coming into FCP. Any ideas?