Cannot start NM client and register on N97

I have N97 with up-to-date firmware. I installed NM, as per instructions on email.nokia.com through the phone browser - no problems there. When I start Email application (from Menu/Applications/Menu) it goes though email setup process which ends with successful creation of an email account in Messaging folder. Once set up is completed and Email client application is run again, it goes again to email setup and does not start nokia email client.
Within the whole process, there was no option to register to Nokia Messaging account.
I can receive and send emails, but through basic SMS-type client. How can I get NM client running?

What version of firmware is device running? Also, which country and which operator are you using? Are you able to log into your account at email.nokia.com?
Chris McK - Nokia Messaging/Social Product Marketing

Similar Messages

Just buy my macbook last week, and the problem is i cannot start my macbook and is making are beep beep sound. And is become warm. But when I connect to a charger is can start like normally. What I'm need to do so? Thank You.

just buy my macbook last week, and the problem is i cannot start my macbook and is making are beep beep sound. And is become warm. But when I connect to a charger is can start like normally. What I'm need to do so? Thank You.

Since you are covered by warranty, I would take it to your nearest Apple store immediately. There might be a problem with the RAM. And, you have 14 days to return the machine, so if it is not an easy fix, you might want to consider returning it for another machine.

Zen 8G This device cannot start code 10 and firmware update problem

I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

Mail program gets locked. cannot start or close. and as a consequence macbook cannot be closed. any suggestions?

My mailprogram gets locked. cannot start or close. and as a consequence my MacBookPro cannot be closed. any suggestions?

Force Quit Mail
Apple Logo from menu Bar/select Force Quit
Force Quit Mail

Cannot start Discoverer Viewer and Discoverer Plus on client.

I have installed Discoverer 9.0.2.39.0 on MS Windows 2000 server.
When I'm trying to start Discoverer Plus an error is occured:
DiscoServerException ??? ??????? ????????? ???????? ????????? ??????. ???????? ?? ?????????. - Nested exception: exception oracle.discoverer.corba.DCCORBAException {
oracle.discoverer.corba.EDCIConstant mErrorCode=kNoMessage,
java.lang.String mReason="??? ??????? ????????? ???????? ????????? ??????. ???????? ?? ?????????.",
java.lang.String mAdditionalInfo=" ",
oracle.discoverer.corba.DCIRow[] mEncodedInfo={}
exception oracle.discoverer.corba.DCCORBAException {
oracle.discoverer.corba.EDCIConstant mErrorCode=kNoMessage,
java.lang.String mReason="??? ??????? ????????? ???????? ????????? ??????. ???????? ?? ?????????.",
java.lang.String mAdditionalInfo=" ",
oracle.discoverer.corba.DCIRow[] mEncodedInfo={}
     at oracle.disco.remote.corba.RMIToCorba.convertDiscovererServerException(RMIToCorba.java:165)
     at oracle.disco.model.corbaserver.ModelInterface.SendReceiveData(ModelInterface.java:194)
     at oracle.disco.model.corbaserver.serverrequest.DsrSetLocaleInfo.xmlUpdateServer(DsrSetLocaleInfo.java:84)
     at oracle.disco.model.corbaserver.serverrequest.DsrCorbaXML.corbaUpdateServer(DsrCorbaXML.java:39)
     at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(DsrGeneralCorbaXML.java:162)
     at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(ExecuteEngineImpl.java:200)
     at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(ExecuteEngineImpl.java:124)
     at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(SessionControllerImpl.java:686)
     at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(SessionControllerImpl.java:450)
     at oracle.disco.model.corbaserver.SessionImpl.setLocaleInfo(SessionImpl.java:417)
     at oracle.discoiv.session.model.ModelSession.setSessionLocale(ModelSession.java:199)
     at oracle.discoiv.session.model.ModelSession.(ModelSession.java:102)
     at oracle.discoiv.session.model.ModelSessionManager.createSession(ModelSessionManager.java:54)
     at oracle.discoiv.state.ConnectTransition.doTransition(ConnectTransition.java:33)
     at oracle.discoiv.state.StateTransition.execute(StateTransition.java:37)
     at oracle.discoiv.state.StateTransition.execute(StateTransition.java:46)
     at oracle.discoiv.state.DiscoState.getState(DiscoState.java:155)
     at oracle.discoiv.state.ConnectedState.getState(ConnectedState.java:90)
     at oracle.discoiv.state.DiscoState.getState(DiscoState.java:52)
     at oracle.discoiv.state.StateMachine.setState(StateMachine.java:75)
     at oracle.discoiv.controller.DiscovererController.setState(DiscovererController.java:236)
     at oracle.discoiv.servlet.DiscovererHttpHandler.processRequest(DiscovererHttpHandler.java:101)
     at oracle.discoiv.servlet.DiscoServlet.doRequest(DiscoServlet.java:314)
     at oracle.discoiv.servlet.DiscoServlet.doGet(DiscoServlet.java:148)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:219)
     at oracle.plus.servlet.Disco4iProxyServlet.doRequest(Disco4iProxyServlet.java:141)
     at oracle.plus.servlet.Disco4iProxyServlet.doGet(Disco4iProxyServlet.java:68)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
     at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
try to start from many clients. It was error too.

Hi,
Were you able to find the solution to this problem? I have installed 9ias successfully. I could log to OEM and created a public connection but I cannot go to
http://hostname.domain:7779/discoverer/viewer
I get an error "Internal Server Error".
Any help is welcome
Vani

Cannot start Web Client

Hi,
I recently installed Oracle Hyperion Data Relationship Management, Fusion Edition.
Ive created a new application and repository using the management console succesfully, however when I try to run the Web Client, I get:
--------================================
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
Diagnose Connection Problems
More information =============================-------------
The url generated is http://localhost/drm-web-client
I am running on windows 7, 64bit and XP respectively with the same results.
Regards,
Olu

It sounds like you are trying to access the file as if your JNLP application were running on the server. The JNLP app is running on the client machine, so you will need to use a URL to open the file. Take a look at the JavaDocs for the following:
     java.net.URL
     java.net.URI
     java.net.File
You also need to be sure your server is configured to serve the file. For example, you ought to be able to access the file through your browser using something like http://www.myco.com/myapp/myfile.txt. (How you configure your server is a topic for a different forum.)
You probably also want to look into JavaWS security, and even Java security in general to determine if you need to sign your app or not. Here are some links to get you started:
        http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/development.html#security
        http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/security.html
        http://java.sun.com/sfaq/
        http://java.sun.com/j2se/1.5.0/docs/guide/security/permissions.html
        http://java.sun.com/j2se/1.5.0/docs/guide/security/index.html
Mike.

Cannot start OWB Client

My OWB Client was working fine earlier today. When I try to start now I get the OWB Logo screen but I never get to the login screen. When I run owbclient.bat i get the following:
C:\oracle\ora92\owb\bin\win32>call setowbenv
JVM LIMIT SET TO: 384M
Exception in thread "main" java.lang.ExceptionInInitializerError: java.lang.Secu
rityException: Cannot set up certs for trusted CAs
at javax.crypto.b.<clinit>([DashoPro-V1.2-120198])
at javax.crypto.Mac.getInstance([DashoPro-V1.2-120198])
at oracle.wh.repos.impl.mcm.foundation.MCMHash.<init>(MCMHash.java:44)
at oracle.wh.repos.impl.mcm.foundation.MCMHash.getInstance(MCMHash.java:
29)
at oracle.wh.repos.impl.mcm.MCMServiceImpl.<init>(MCMServiceImpl.java:16
4)
at oracle.wh.repos.impl.mcm.MCMServiceImpl.getInstance(MCMServiceImpl.ja
va:171)
at oracle.wh.repos.impl.APIController.init(APIController.java:107)
at oracle.wh.util.ControllerInitializer.initControllers(ControllerInitia
lizer.java:118)
at oracle.wh.util.ControllerInitializer.initBackendControllers(Controlle
rInitializer.java:36)
at oracle.wh.util.ControllerInitializer.initAllControllers(ControllerIni
tializer.java:22)
at oracle.wh.ui.framework.StaticLoader.main(StaticLoader.java:114)
Any help provided would be much appreciated.
Alan

I'm working now. The solution is given in thread
Re: OWB client not working by Patrick
I'll copy it here:
1. Download the JCE 1.2.2 package from the following web page:
http://java.sun.com/products/jce/index-122.html
2. Either reboot your Client machine or Stop all Oracle software.
3. Rename or remove the following files :
$OWB92_CLIENT_HOME/jdk/jre/lib/ext/US_export_policy.jar
$OWB92_CLIENT_HOME/jdk/jre/lib/ext/jce1_2_1.jar
$OWB92_CLIENT_HOME/jdk/jre/lib/ext/local_policy.jar
$OWB92_CLIENT_HOME/jdk/jre/lib/ext/sunjce_provider.jar
4. Copy the following files from the JCE 1.2.2 package to the directory OWB92_CLIENT_HOME/jdk/jre/lib/ext/ :
jce1.2.2/lib/US_export_policy.jar
jce1.2.2/lib/jce1_2_2.jar
jce1.2.2/lib/local_policy.jar
jce1.2.2/lib/sunjce_provider.jar
5. Rename jce1_2_2.jar as jce1_2_1.jar
6. Now try launching OWB 9.2 client.

Cannot start Oracle, Listener and EnterpriseManager

Hello all!
I am using Oracle 11g an I can't start them after I have installed updates for Windows Server 2003 64bit. Whenever I had rebooted my machiene the database had worked every time after startup. But this time it doesn't start.
When trying to start services OracleService[SID], OracleOraDb11g_home1TNSListener, OracleDBConsole[SID] and Oracle [SID] VSS Writer Service I get the error code 1053. I don't understand what happened.
I have done some research. I trace the startup of the services with Process Monitor. Starting the service
1. OracleService[SID] oracle.exe wants to access a file called oraclient11.dll within d:\oracle\product\11.1.0\db_1\bin. But there is no such file within the Oracle Base Directory.
2. OracleOraDb11g_home1TNSListener tnslsnr.exe wants to acces a file called oran11.dll within d:\oracle\product\11.1.0\db_1\bin. But there is no such file within the Oracle Base Directory.
3. OracleDBConsole[SID] nmesrvc.exe wants to access a file called orauts.dll within d:\oracle\product\11.1.0\db_1\bin. But this file is the directories db_1\bin\ctxhx, db_1\oui\bin and db_1\oui\lib\win64.
4. Oracle [SID] VSS Writer Service oravssw.exe wants to acces a file called oci.dll within d:\oracle\product\11.1.0\db_1\bin. But there is no such file within the Oracle Base Directory.
What went wrong? What can I do witohut re-installing the database in order to get working it?
Yavuz

Hi Hub!
There is no oraclient11.dll file in the d:\oracle directory and its subdirectories and also not in the system32 directoy. So I cannot rename it. The same is right for the other files mentioned in my first post.
I can't acces metalink. metalink.oracle.com forwards me to https://metalink.oracle.com/csp/ui/index.html which is not available (404) at this time.
For the ADR log files I'm not sure if I found the right files. I have extract the part of the files which are written after the reboot.
d:\oracle\diag\rdbms\[SID]\[SID]\alert\log.xml
<msg time='2008-11-03T18:46:14.922+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>
</txt>
</msg>
<msg time='2008-11-03T18:46:15.219+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.1.0.6.0 - Production
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> Time: 03-NOV-2008 18:46:15
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> Tracing not turned on.
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> Tns error struct:
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> ns main err code: 12638
</txt>
</msg>
<msg time='2008-11-03T18:46:15.235+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>
</txt>
</msg>
<msg time='2008-11-03T18:46:16.750+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>TNS-12638: Abrufen der ID-Daten nicht erfolgreich
</txt>
</msg>
<msg time='2008-11-03T18:46:16.750+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> ns secondary err code: 0
</txt>
</msg>
<msg time='2008-11-03T18:46:16.750+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> nt main err code: 0
</txt>
</msg>
<msg time='2008-11-03T18:46:16.750+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> nt secondary err code: 0
</txt>
</msg>
<msg time='2008-11-03T18:46:16.750+01:00' org_id='oracle' comp_id='rdbms'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt> nt OS err code: 0
</txt>
</msg>
d:\oracle\diag\rdbms\[SID]\[SID]\trace\alert_[SID].log
Mon Nov 03 18:46:14 2008
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.1.0.6.0 - Production
Time: 03-NOV-2008 18:46:15
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Abrufen der ID-Daten nicht erfolgreich
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
d:\oracle\diag\rdbms\[SID]\[SID]\trace\[SID]_ora_2028.trc
Trace file d:\oracle\diag\rdbms\[SID]\[SID]\trace\[SID]_ora_2628.trc
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 2 - type 8664, 1 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:494M/2030M, Ph+PgF:3425M/5981M
Instance name: [SID]
Redo thread mounted by this instance: 1
Oracle process number: 0
Windows thread id: 2628, image: ORACLE.EXE (SHAD)
*** 2008-11-03 18:46:16.953
opiino: Attach failed due to ORA-12638
d:\oracle\diag\tnslsnr\[HOSTNAME]\listener\trace\log.xml
<msg time='2008-11-03T18:45:39.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:45:39 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:45:42.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:45:42 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:45:45.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:45:45 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:45:48.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:45:48 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:45:51.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:45:51 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:46:06.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:46:06 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:46:12.360+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:46:12 * service_update * [SID] * 0
</txt>
</msg>
<msg time='2008-11-03T18:46:23.969+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:46:23 * service_died * [SID] * 12547
</txt>
</msg>
<msg time='2008-11-03T18:46:23.969+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>TNS-12547: TNS: Verbindung verloren
</txt>
</msg>
<msg time='2008-11-03T18:46:25.969+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:46:25 * (CONNECT_DATA=(SID=[SID])(CID=(PROGRAM=D:\Oracle\product\11.1.0\db_1\bin\emagent.exe)(HOST=[HOSTNAME])(USER=OraUser))) * (ADDRESS=(PROTOCOL=tcp)(HOST=[IP])(PORT=3260)) * establish * [SID] * 12505
</txt>
</msg>
<msg time='2008-11-03T18:46:26.000+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>TNS-12505: TNS: Listener kann in Connect-Deskriptor angegebene SID aktuell nicht auflösen
</txt>
</msg>
<msg time='2008-11-03T18:46:31.016+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>03-NOV-2008 18:46:31 * (CONNECT_DATA=(SID=[SID])(CID=(PROGRAM=D:\Oracle\product\11.1.0\db_1\bin\emagent.exe)(HOST=[HOSTNAME])(USER=OraUser))) * (ADDRESS=(PROTOCOL=tcp)(HOST=[IP])(PORT=3262)) * establish * [SID] * 12505
</txt>
</msg>
<msg time='2008-11-03T18:46:31.016+01:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='[HOSTNAME]'
host_addr='[IP]'>
<txt>TNS-12505: TNS: Listener kann in Connect-Deskriptor angegebene SID aktuell nicht auflösen
</txt>
</msg>
d:\oracle\diag\tnslsnr\[HOSTNAME]\listener\trace\listener.log
Mon Nov 03 18:46:06 2008
03-NOV-2008 18:46:06 * service_update * [SID] * 0
03-NOV-2008 18:46:12 * service_update * [SID] * 0
Mon Nov 03 18:46:23 2008
03-NOV-2008 18:46:23 * service_died * [SID] * 12547
TNS-12547: TNS: Verbindung verloren
03-NOV-2008 18:46:25 * (CONNECT_DATA=(SID=[SID])(CID=(PROGRAM=D:\Oracle\product\11.1.0\db_1\bin\emagent.exe)(HOST=[HOSTNAME])(USER=OraUser))) * (ADDRESS=(PROTOCOL=tcp)(HOST=[IP])(PORT=3260)) * establish * [SID] * 12505
TNS-12505: TNS: Listener kann in Connect-Deskriptor angegebene SID aktuell nicht auflösen
03-NOV-2008 18:46:31 * (CONNECT_DATA=(SID=[SID])(CID=(PROGRAM=D:\Oracle\product\11.1.0\db_1\bin\emagent.exe)(HOST=[HOSTNAME])(USER=OraUser))) * (ADDRESS=(PROTOCOL=tcp)(HOST=[IP])(PORT=3262)) * establish * [SID] * 12505
TNS-12505: TNS: Listener kann in Connect-Deskriptor angegebene SID aktuell nicht auflösen
I hope you can see what was going wrong.
Yavuz

Cannot start Domain Controller and node

I installed Oracle db v9.2.0.1, oracle 9ias j2ee and web cache Release 2 (v9.0.3) and CMSDK v9.0.3 for windows on single machine.
Installation was fine.
However, when I try to start ifs domain controller, I got following error in ifsctl.log file.
+++++++++
2/28/03 11:42 PM ifsctl: HostController constructed
2/28/03 11:42 PM SocketRemoter: Initialized
2/28/03 11:42 PM ifsctl:
2/28/03 11:42 PM ifsctl: Domain ifs://star:1521:i4idb:I4ITEST
2/28/03 11:42 PM ifsctl:
2/28/03 11:42 PM ifsctl: Domain controller
2/28/03 11:42 PM ifsctl: (runs locally)
2/28/03 11:42 PM SocketRemoter: Find ifs_socket://star:53140/IFS.DOMAIN.DOMAINCONTROLLER.Locator
2/28/03 11:42 PM SocketRemoter: Constructed channel [email protected]:53140
2/28/03 11:42 PM ifsctl: is stopped; launching
2/28/03 11:42 PM ifsctl: Unexpected exception: Error from external process: 6
2/28/03 11:42 PM ifsctl:
2/28/03 11:42 PM ifsctl: oracle.sysman.emSDK.common.emdComm.RemoteOperationException
oracle.sysman.emSDK.common.emdComm.RemoteOperationException: Error from external process: 6
     at oracle.sysman.emd.command.OSCommandManager.runOSCommand(OSCommandManager.java:239)
     at oracle.sysman.emd.main.EMDRuntime.runRemoteCommand(EMDRuntime.java:1334)
     at oracle.sysman.emSDK.common.emdComm.EMDClient.remoteOperation(EMDClient.java:501)
     at oracle.ifs.admin.web.monitor.EmdHostControllerForker$1.run(EmdHostControllerForker.java:126)
2/28/03 11:42 PM ifsctl: HostController disposed
2/28/03 11:42 PM ifsctl:
2/28/03 11:42 PM ifsctl:
2/28/03 11:42 PM ifsctl: HostController constructed
2/28/03 11:42 PM ifsctl: HostController disposed
2/28/03 11:42 PM ifsctl:
++++++
Does anyone know this problem?
Thanks a lot.
Kate

"Error from external process: 6" means there is no such user account on your windows machine. Make sure the user name and password you specified are valid. And you need to grant the "log on as a batch job" user right to the user account, otherwise you'll see error 7 (authentication error).
Please consult with CMSDK Admin Guide for details.

I cannot start my ipadmini and it seems not charging?

I bought ipadmini two months ago and suddenly it shuts down and after pressing the button it doesn't start up, and it seems it is not charging. I don't know what to do, I think i still holds my warranty?

If it's not charging,
1) it could be the cable (try using a different one),
2) it could be the adapter plug (if you are using it to charge from the wall), try a different adapter,
3) it could be the USB source (if charging from a computer's USB plug), in which case the computer may not be putting out enought power (PCs tend to do this, macs do not).
Since it's not charging, it could be that the device is out of power, hence you can't turn it on.
But try this. press and hold the power and home buttons and wait (keep pressing) until the Apple icon appears. This can take a while.

Cannot start dispacher, tcp_smtp_server, and job_controller

IInstallation and configuration of JSMS 6.1 was done as a component of JES. First start right after the installation using �start-msg� was quite successful. But after the change of "service.http.port" to 2080 with "configutil" command any attempt to start-msg are failed with the "dispatcher" timeout and "job_controller" failed.
The log files (dispatcher.log, tcp_smtp_server.log, and job_controller.log) are of "0" length in spite of increasing verbosity with "DEBUG=-1 and/or DEBUG=5" in �dispatcher.cnf� and �job_controller.cnf�. The tracing shows the last error as ENOTTY (25), but the output has few preceding errors in system calls where I would never expect it. I also activated "local.autorestart=yes" which produced two "defunct" processes forked by the �watcher� from "msstart -r " program and which I need manually remove.
And I don't have the patch 116568-60.
Now, I think you know almost everything (quite messy). Please, help me. I need it ASAP.
Regards,
Peter Kinev

I've the same version (without the patch), and i've changed the port:bash-2.05# ./configutil -o service.http.port
80
bash-2.05# ./configutil -o service.http.port -v 2080
OK SET
bash-2.05# ./configutil -o service.http.port
2080
bash-2.05# ./imsimta chbuild
bash-2.05# ./imsimta cnbuild
bash-2.05# ./start-msg
Connecting to watcher ...
Launching watcher ...
Starting ens server .... 11151
Starting store server .... 11152
checking store server status .... ready
Starting imap server .......... 11154
Starting pop server ......... 11157
Starting http server ................ 11160
Starting sched server .... 11162
Starting dispatcher server .... 11164
Starting job_controller server .... 11168
bash-2.05# ./imsimta version
Sun Java(tm) System Messaging Server 6.1 (built Apr 28 2004)
libimta.so 6.1 (built 13:10:36, Apr 28 2004)
SunOS server.domain.com 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-250
bash-2.05#But, as you can see, i'm not able to reproduce the problem.
Anyway if you want to enable logging for the IMTA component you should add the keyword logging on the default channel definition in the imta.cnf file

Cannot start SAP XI - Integration Respository and Directory

Dear Expert,
Some of developers cannot start Integration repository and directory at his/her client. It still running after logon with "PISUPER" user.
Do I missing some necessary applications on the clients?
Please advise.
Thank and regards,

Thanks for your answer, Alexander Bruch,
I think the host name is no problem because the Integration Builder page can be started with URL "http://iwdfvm2160:51000/rep/start/index.jsp" and also prompt me the logon window. But after input the user/password, normally is PISUPER, the logon window is running for a long time, nothing happen.
We also using user PISUPER and it's fine with another laptop.
Regards,
Kobsak

Zen stone, vista and "device cannot start (Code 10) message&qu

Today i got a Zen Stone gb mp3 for use with a local library's program, Overdri've Media which allows users to download e-books to their computer and then transfer the files to?a MP3-the Zen. The first time I used it it worked fine, no problem. Then I tried another download transfer later . When I attempted to load the Zen by plugging it into my USB port (I tried 3 different ports), the computer would not find?the device. This happened even though a screen appeared showing that a portable dri've had connected and the files could be played on WMP or other players.
In Device Mgr., the Zen dri've has a yellow triangular sign showing an ! in it. Further exploration in Device Mgr. gives this message:
? Device Cannot Start (Code 0)
? Could not load Driver software.
? Windows was able to sucessfully install device driver software,however the dirver software encountered a problem when it tried? to run. Problem code 0.
?The drivers are up to date as is the firmware. I have run through the troubleshooting pages and the forum. I am using Vista 32-bit with 2 g memory. The Windows Media Player is v , which is required by the book/ library software, Overdri've Media.
Incidentally, the Zen works fine on my wife's XP laptop. Any help is greatly appreciated. Thanks

GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

Goto saving images into a pdf and a message comes up " cannot start print job"

I an having a problem with my lightroom 4- I goto save my images into a PDF and it comes up " cannot start print job" and wont even save the images. What can be the problem, ive never had the situation before.

Hi Sasha,
Using Acrobat, you can create forms that are called AcroForms. The forms created in LC Designer are called XFA (XML Forms Architecture) and are more data centric. While both will open in Acrobat, they are completely different animals.
The issue with users not being able to save the data with Reader is that the form is not Reader Enabled. You can Reader Enable a form using one of two methods:
Reader Enable the form using Acrobat Professional (V8 or below) or Acrobat Standard (V9 or above). Note there are licensing restrictions.
Reader Enable the form using the full server product Adobe LiveCycle Reader Extensions ES2.5. This involves additional licensing fees.
Have a look here: http://assure.ly/etkFNU, at the features that are available depending on whether the user has Acrobat or Reader; if the form is Reader Enabled; and how the form was Reader Enabled.
The issue of Reader Enabling would also apply to AcroForms.
I don't think that you need to dive into LC Designer just yet, as forms created in LC Designer face the same issues about Reader Enabling as forms developed in Acrobat.
If your usage complies with the EULA, then you could Reader Enable your form in Acrobat.
Hope that helps,
Niall

Cannot start an add-on

SBOers,
My registration used to work fine earlier. However, after a few install/uninstall of the add-on, now I cannot get my installer to start anymore.
Here are more details:
I have two VB.NET programs:
MyAddOn.exe
Installer.exe
1. Uninstalled the existing addon and deleted all the files under SAP Manage\...\AddOns directory.
2. Generated a new registration file.
3. Ran SBO client and registered the program. Selected "Force Install" from the addon administration UI. Registration goes fine.
4. Quick SBO client and ran it once again.
I get an error message "Cannot start the addon."
I have been playing around with various settings but no success yet. SBO client never runs my Installer.exe.
I have also tried to start the addon from the addon manager. No success there either.
I would appreciate it if someone can enlighten me on what could be going wrong.
Thank you in advance for your help.
Pradeep

Another reason could be that the SAP client is not registered properly. I do not know why this happens, but we had it happen with four clients.
Addons in 2004 would install on other clients allright, but not on these four.
Here is how I got them to work (there is a SAP note out on this issue):
stop sap client
Open a Dos-Box
Change to folder Program Files/SAP Manage/SAP Business One
Execute: sapbouicom /regserver
restart sap client again
HTH Lutz Morrien

Cannot start NM client and register on N97

Similar Messages

Maybe you are looking for