Cannot start Oracle BI Server Service
I had installed Oracle Bussiness Intelligence 10g Release 2 version on my system....I was able to generate reports properly with the Default Repository(SH)....But When I created an OLAP repository and loaded it....It worked fine for a few minutes....then BI server service was automatically stopped....later when the service was restarted,it worked for 5 min but agin it got automatically stopped....but on attempting to restart the service again I got a error message ERROR 1068: Service cannot be be started because groups or dependencies not loaded....How can I reinstate the server process? I tried changing the repository to the default one but it didn't work....
Edited by: user10422576 on Oct 19, 2008 11:42 PM
I have seen similar errors when the repository is corrupt. Are you able to open the repository in offline mode ? In online mode, when you check consistencies, does it pass or does it throw any errors ? Also check the log files. if you are not getting enough information, try changing the loglevel for that user and then try it. usually this gives a good amount of info to debug.
Good Luck.
Dinesh Veera
Similar Messages
-
Can't start Oracle BI Server service after uploadingo RPD
Hi,
I have just installed OBIEE 11g and I have some problems, or I don't know fine 11g version :-)
ONLINE RPD
1) It response with UNKNOWN ERROR in case I would like to add new DATABASE in Physical Layer;
2) The consistency check fail with nQSerror: 37005 Transactional Update Failed
OFFLINE RPD
I deploy without problem, but after uploaded RPD on line and I do start and stop with opmnctl command, the Oracle BI server service still Down ad not Alive. Other services still Alive.
The RPD chek consistency response without error!!!
Please can you help me???
Thx
GIUSEPPE CONZOThe entire file log message is:
//# Copyright (c) 1997-2011 Oracle Corporation, All rights reserved
//# VERSION 1
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-22 11:13:30.142
//# SAVED : 2012-08-22 15:45:03.896
//# END SESSION ChangeLogTimeStamp:2012-08-22 15:45:04.554
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-22 15:51:10.183
//# SAVED : 2012-08-23 09:08:16.877
//# END SESSION ChangeLogTimeStamp:2012-08-23 09:08:19.911
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 09:10:33.007
//# SAVED : 2012-08-23 10:03:51.001
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:03:51.563
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:04:26.237
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:04:37.229
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:05:24.176
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:08:30.691
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:08:45.497
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:08:50.313
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:17:05.808
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:17:11.193
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:20:53.579
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:21:45.639
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:22:33.292
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:22:38.474
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:26:02.480
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:26:10.252
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:28:36.411
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:28:42.221
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:28:57.728
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:29:50.166
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:30:08.406
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:30:13.433
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:35:06.181
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:35:12.237
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:36:52.816
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:49:15.696
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:50:17.050
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:50:22.617
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:52:19.294
//# END SESSION ChangeLogTimeStamp:2012-08-23 10:54:52.161
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 10:59:48.588
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:03:35.447
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:04:46.787
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:21:09.629
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:21:27.020
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:25:23.819
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:30:03.133
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:35:25.779
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:35:57.415
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:50:50.490
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:51:08.165
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:52:21.261
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:52:36.061
//# END SESSION ChangeLogTimeStamp:2012-08-23 11:53:52.961
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 11:56:02.026
//# END SESSION ChangeLogTimeStamp:2012-08-23 12:16:59.915
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:17:11.915
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:17:18.767
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:17:34.227
//# BEGIN SESSION ChangeLogTimeStamp:2012-08-23 12:52:33.344 -
Cannot start oracle name server
When I try and start my name server service I get the following error in my listener.log file:
TNS-12502: TNS:listener received no CONNECT_DATA from client
The name server will not start and if I try and execute the Names.exe I get the error:
NNL-00018: warning: could not contact default name server
Any ideas?
TimDid you configure your name Server ? with namesctl utility
oracle@spirit:~/OraHome1/dbs> namesctl
Oracle Names Control for Linux: Version 8.1.7.0.0 - Production on 31-OCT-2003 13:04:14
(c) Copyright 1997 Oracle Corporation. All rights reserved.
NNL-00024: warning: no preferred name servers in SQLNET.ORA
NNL-00018: warning: could not contact default name server
Welcome to NAMESCTL, type "help" for information.
NAMESCTL>
Joel P�rez -
Error while starting Oracle Management server service
Hi all,
We are about to administer our database using Oracle Enterprise manager. For that we have configured OEM in a Test PC and tried to connect our database.
First i have logged in to OEM Console with Sysman login id using the default password "oem_temp" and it prompts me to change the password, also i have changed the password as "xxxxx" and i have come out of OEM console and tried to relogin using the changed password.
i got the message as invalid login or password or
check for the availablity of Management server service"
i found that the service Oracle Management server which was previously running is not running now and i tried to restart that manually.
On doing that i got a message as
"Error 1053: The service did not respond to the start or control request in a timely fashion"
Would any one of u help me to solve this problem.
Thanks in advance..Hi-- could you please describe your administrative domain?
I need to know the operating systems on each of the
clients and the OSB admin server. Also, does 'obtool' CLI
tool work? Do any of the machines act as an apache webserver
for another application? Is there any other backup service
running on any of the machines?
thanks,
Judy
I noticed that when re-installing the OSB without the
Administrative Server (only Media Server and Client)
I got no errors at all (but still cannot connect from
another Administratice Server to my machine) -
Cannot start Oracle BI Scheduler service ---pls help.
Hi all,
I'm new in OBIEE.
I already installed and created some reports and dashboards in OBIEE. I found the problems that they are not updated data when new data loaded into DB.
I tried to start the Oracle BI Scheduler service but it has had the error like the message below;
"The description for Event ID ( 21 ) in Source ( Oracle BI Scheduler ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details.
The following information is part of the event: [68008] Scheduler Error: [nQSError: 67042] The Scheduler Configuration is incorrect.
[nQSError: 67004] Registry value for SchedulerScriptPath not set.."
Could anyone suggest me how would I be able to solve this error ?
Thank you in advance.
NNNhi
First I do thank you for your answer quickly.
For now, I have tried to follow your suggestion but I found a new error when I start bi scheduler service.
==========================================================================================
The description for Event ID ( 21 ) in Source ( Oracle BI Scheduler ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: [68008] Scheduler Error:
Current Table: S_NQ_JOB.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
Current Table: S_NQ_JOB_PARAM.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
Current Table: S_NQ_INSTANCE.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed.
Current Table: S_NQ_ERR_MSG.
[nQSError: 17001] Oracle Error code: 942, message: ORA-00942: table or view does not exist
at OCI call OCIStmtExecute.
[nQSError: 17010] SQL statement preparation failed..
===================================================================
Any concern that I should know and how can I hanle this error ?
Thank you -
Cannot start Oracle HTTP Server
Hi,
if I try to start the Oracle HTTP Server I get the following error message on the console:
C:\Oracle\product\11.1.1\as_1\instances\instance1\bin>opmnctl startproc ias-component=ohs1
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=bittest1:6703
0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
ohs1/OHS/OHS/
Error
--> Process (index=1,uid=366744641,pid=1728)
Starten von verwaltetem Prozess nach der maximalen Anzahl der Wiederholungen
nicht erfolgreich
Log:
C:\oracle\product\11.1.1\as_1\instances\instance1\diagnostics\logs\OHS\ohs1\
console~OHS~1.log
In the log file I found this entry:
09/08/28 13:03:32 Start process
Apache.exe: Syntax error on line 1032 of C:\\oracle\\product\\11.1.1\\as_1\\instances\\instance1\\config\\OHS\\ohs1/httpd.conf: Syntax error on line 3 of C:/Oracle/product/11.1.1/as_1/instances/instance1/config/OHS/ohs1/mod_wl_ohs.conf: Cannot load C:/Oracle/product/11.1.1/as_1/ohs/modules/mod_wl_ohs.so into server: The specified module could not be found
But this module is definitive in this folder. What can I do?
Edited by: user8631539 on 28.08.2009 04:14I have a workaround - If you are not planning to use mod_wl_ohs then don't load this module.
You can stop it loading by commenting below line from httpd.conf
include "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/mod_wl_ohs.conf"
1. Go to
C:\\oracle\\product\\11.1.1\\as_1\\instances\\instance1\\config\\OHS\\ohs1/httpd.conf
2. change
# Include the configuration files needed for mod_weblogic
include "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/mod_wl_ohs.conf"
to
# Include the configuration files needed for mod_weblogic
# include "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/mod_wl_ohs.conf"
3. Restart HTTP Server
4. $ORACLE_BASE/admin/<instance_name>/bin/opmnctl restartproc ias-component=ohs1
Atul Kumar
http://onlineAppsDBA.com -
Cannot start the SQL server service after you install Active Directory
Good Morning,
Im the system admin for a small company. We have a dedicated domain controller but it is the only one. To get a second domain controller up and running on our domain, I installed the AD role on our file and SQL server. After the reboot
we couldnt get SQL up and running. I found this article
http://support.microsoft.com/kb/929665
In the article it reads
To work around this issue, repair Windows Internal Database. To do this, run the following command line at a command prompt:
Msiexec /i SSEE_10.msi CALLERID=OCSetup.exe REINSTALL=ALL REINSTALLMODE=omus /qn REBOOT=ReallySupress /l*v <var><Log_File_Path></var>
My question is what is the Log_File_Path? Is that where I installed the AD log path?
My DBA is also looking into this as well.
Thanks in advance,
Brian
Brian Fink, MCSEHi Brain,
what's version of SQL Server that you have installed and what's your operationg system version info?
If you are running SQL Server 2008, which is not supported on the Windows Server 2008/2008 R2 domain controll (DC), even on Windows Server 2003 DC, there are limitations. Microsoft does not recommend to install SQL Server instances and DC on the same server,
for more information, see Install SQL Server on a Domain Controller (http://msdn.microsoft.com/en-us/library/ms143506.aspx#DC_Support).
There are some threads in the forum talked about installing SQL Server and DC on the same server, here are some for your references:
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/1a2963ff-90d7-4bba-97ce-fa15f70fb6a8/
http://social.technet.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/981ef726-d04a-4063-8008-cc7bbad854ab/
Hope this helps. Please feel free to let me know if you have more questions.
Best Regards,
Chunsong Feng [MSFT]
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Oracle Forms Server Service cannot start by scripts (windows2k)
We have a Portal & Application Server installed (Forms&Reports 6i).
Server is Windows2000.
I have to start Oracle Forms Server service by scripts, when i manually start the process by pressing start or stop, it works & asks for nothing.
but when i write a script to stop & start oracle forms server , it stops by script.
but it fails to start & says FRM-60009 : ifsvr60 correct usage : -install [service name] exc..... so service doesnt start but when i go to services & start it manually by presing start , it starts. I dont want to install a new service just stop & start the engine.
How can i start the forms server service by a script ? (any of known commands or a way to Oracle forms server service to start by scripts ?)
Thx for Help..Hi
Have you checked that the rpd file still exists in the Repository folder? Did you leave it in a consistent state? assuming the paint.rpd is still there, double click it and see if you can open it, if so run a consistency check.
Rgds
Ed -
Need Help on Oracle BI Server Service
Hi there,
I would need help on to start Oracle BI Server service start.
I have installed OBIEE 10.1.3.4 version and I've been working on creating repository and creating Answers & Dashboards etc..,
Today, I was working on to point other repository in NQSConfig.INI file and when I tried to Start Oracle BI Server Service I get below error:
" *Could not start the Oracle BI Server service on Local Computer*
*Error 1064 An exception occurred in the service when handling the control request*"
It's been working, just I got this error today only, all other services are working fine.
Has anyone got this error?
Any help would be greatly appreciated.
Thank you
Skat
Edited by: Skat on Nov 10, 2009 8:07 PMHi All,
Thank you so much for all your quick replies and it worked now.
You are right, I changed repo name and changed back to original one and and Service is starting now.
I think something missing space or format issue when I add other entry in the NQSconfig.INI file, Ihave to follow same synatx.
Now I am good to go.
Thanks again,
skat -
Cannot start the presentation server
Linux OS
OBIEE 11.1.1.5.0
Weblogic Server 10.3.5.0
OBIEE gurus,
I cannot start the presentation server via EM or via the command line ./opmnctl startproc ias-component=coreapplication_obips1.
I get the error in the comman line:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=****:9501
0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication_obips1/
Error
--> Process (index=1,uid=2107403675,pid=27813)
failed to start a managed process after the maximum retry limit
Log:
$ORACLE_INSTANCE/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1/console~coreapplication_obips1~1.log
I have checked the log above which contains:
13/07/18 15:27:07 Start process
13/07/18 15:27:14 Start process
13/07/18 15:58:53 Start process
13/07/18 15:59:00 Start process
Not very helpful!
I have checked the OPMN log at $ORACLE_INSTANCE/diagnostics/logs/OPMN/opmn/opmn.log which has the following errors:
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:58][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
I have tried refreshing the user GUIDS, loading another rpd file in through EM that I know works fine in another environment, cleaning the permissions in the web catalog but all so dar have not resulted in me being able to start the presentation server.
I would welcome any feedback on this as it is driving me crazy!
Thanks in anticipation.Hi ,
I tried it but no use. That thread had some errors displayed in it. But i get just a warning.
Pls help
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:41 2010
File: project/sawserver/sawserver.cpp Line: 604
Properties: ThreadID-1532
Location:
saw.sawserver
saw.sawserver.terminatesawserver
saw.threads
Oracle BI Presentation Services are shutting down.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 386
Properties: ThreadID-968
Location:
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Oracle BI Presentation Services 10.1.3.4.1 (Build 090414.1900) are starting up.
Type: Warning
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/websubsystems/webextensionbase.cpp Line: 380
Properties: ThreadID-968
Location:
saw.webextensionbase.init.workstationCheck
saw.webextensionbase.init
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
WARNING: The Oracle BI Presentation Server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.). Number of concurrent users may be severely limited by the operating system.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 459
Properties: ThreadID-968
Location:
saw.sawserver
saw.sawserver.initializesawserver
saw.threads
Oracle BI Presentation Services have started successfully.
Thanks
Jaan -
Getting Error 2140 while starting Oracle Apache Server in 11.5.6 Apps
We are on Oracle Apps R11.5.6 on Win NT 4.0.
When I tried to stop and start the Oracle Apache Server service, the service stopped normally but did not start at all. The error is as given below:
When I try to start Apache Server through the services, I get the following error:
"Could not start the OracleApacheServerTEST service on \\son1052.
Error 2140: An internal Windows NT error occured."
When I try to start Apache Server through the command prompt, I get the error:
The OracleApacheServerTEST service is starting.
The OracleApacheServerTEST service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
D:\oracle\testcomn\admin\scripts>goto end
D:\oracle\testcomn\admin\scripts>echo "adapcctl.cmd exiting with status 2"
"adapcctl.cmd exiting with status 2"
D:\oracle\testcomn\admin\scripts>net helpmsg 3534
The service did not report an error.
EXPLANATION
The service did not report an error.
ACTION
Try the task later. If the problem persists, contact your network administrator.
What might be the problem?
Any help would be greatly appreciated.
Thanks in Advance.
Praveen
[email protected]Login from svrmgrl and shutdown the db and then restart the db now start the service and it must start. This problem comes when you restart the server. I hope this will solve your problem.
[email protected] -
Oracle Management Server Service not created
Hello,
I created a Management Server Repository using OEMCA and an existing SID. According to the details displayed at the end of the wizard I assume that the process was finished successfully:
(NT-Service OracleOraHome81 ManagementServer is started...
Disconnect from oms@instancename....
Returning to connection system@instancename...
Process finished.
Yet the Oracle Management Server Service can not be found in SERVICES in the control panel...and therefore can't be started manually.
I have OS-Administrator Privileges.
I use Oracle 8.1.7 on WinNT.
Any help would be greatly appreciated.
Thanx
StefanI have this problem too. (posted a separate thread on
this before I read this one, sorry).
Here is my oms.nohup:
E:\oracle\ora81\sysman\log>tail -f oms.nohup
[main][2003-10-9:18:7:57:599] ORA-01017: invalid
username/password; logon denie
d
: ..../....@jdbc:oracle:oci8:@exorabsp
[main][2003-10-9:18:7:57:599]
VdbSession.processError: invalid connect string
VXA-2018 :
Anmeldung bei OMS-Registrierungsdienst nicht m�glich
oracle.sysman.vxn.VxnBootstrapException:
at
at
at
t
oracle.sysman.vxa.VxaAppServer.startServices(VxaAppSer
er.java:1353)
at
at
at
t
oracle.sysman.vxa.VxaAppServer.main(VxaAppServer.java:
547)
Fehler beim Hochfahren von Oracle Management Server.
Somehow, by reading the responses here - created new repository - I managed to get OMS working again. -
OBIEE - Oracle BI Server service (NQSServer.exe) goes down
Hello,
I'm experiencing a issue with the Oracle BI Server service (NQSServer.exe), it goes down when the CPU reaches to the 100% with this service.
This happens when the Job Manager tries to send 20mails (ibots) at the same time.
This never happen before.
Here you can see the error, when the CPU reaches to 100%, and the NQSServer.exe goes down.
+++ ThreadID: bd8 : 2013-05-04 11:24:50.167
Global Error: [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Odbc driver returned an error (SQLDriverConnectW).
Error Codes: OPR4ONWY:U9IM8TAC
State: 08004. Code: 10092. [NQODBC] [SQL_STATE: 08004] [nQSError: 10092] The Oracle BI Server is not currently running.
Cannot connect to server machine (08004)
Is this normal?
Can I try to manage the settings for this service (NQSServer.exe)?
Thank you in advance.Hello,
I'm experiencing a issue with the Oracle BI Server service (NQSServer.exe), it goes down when the CPU reaches to the 100% with this service.
This happens when the Job Manager tries to send 20mails (ibots) at the same time.
This never happen before.
Here you can see the error, when the CPU reaches to 100%, and the NQSServer.exe goes down.
+++ ThreadID: bd8 : 2013-05-04 11:24:50.167
Global Error: [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Odbc driver returned an error (SQLDriverConnectW).
Error Codes: OPR4ONWY:U9IM8TAC
State: 08004. Code: 10092. [NQODBC] [SQL_STATE: 08004] [nQSError: 10092] The Oracle BI Server is not currently running.
Cannot connect to server machine (08004)
Is this normal?
Can I try to manage the settings for this service (NQSServer.exe)?
Thank you in advance. -
9i No Oracle Management Server Service in Control Panel
I installed Oracle 9i yesterday but there is no Oracle Management Server Service in the Control Panel. Any ideas anyone on how to rectify this ?
start the Oracleagent services first and then make sure your oraclelistener is running before you attempt to start the ManagementServer.
-
Unable start my OBIEE server Services
Hi,
When i stop and start by OBIEE server service, after replacing the new rpd file, i am getting an application error::
The instruction at "0x6fd6293d" referenced memory ar "0x00000010". The memory could not be "Read"
After clicking on OK throwing an error:
error 1053 the service did not respond to the start or control request in a timely fashion
The server is getting restarted if i place with an other rpd file. The NQServer log is also not having any traces of aborting below are last lines of the server log.
2009-07-31 21:48:24
[14056] Finished loading subject area: eDART.
2009-07-31 21:48:24
[14055] Loading subject area: Moto SRT ...
2009-07-31 21:48:29
[14056] Finished loading subject area: Moto SRT.
2009-07-31 21:48:29
[14055] Loading subject area: LCOM KPI ...
2009-07-31 21:48:29
[14056] Finished loading subject area: LCOM KPI.
2009-07-31 21:48:29
[14055] Loading subject area: DUMMY BMM for New Projects ...
2009-07-31 21:48:29
[14056] Finished loading subject area: DUMMY BMM for New Projects.
Finally it is not aborted.
Tried to run it mannualy
Oracle BI Server starting...
Destroying a lock while it is still owned by a thread.
Current Owner thread id: 3364 (0xd24)
Current thread id: 3720 (0xe88)
Lock pointer: 0x6DE6B35C
Lock created in file: .\Source\NQSQueryEnvironment.cpp
Lock created on line: 60
Lock created in function:
Error in file: .\NQThreads\SUGCriticalSection.cpp
Error on line: 138
Error in function: NQCriticalSection::~NQCriticalSection
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Edited by: Chenna on Jul 31, 2009 9:30 AMHi Could you please let me know whether your issue got resolved with out taking new catalog file from source system....
Maybe you are looking for
-
Logical path using in abap program
hay, I want to create file in application server directory. so i want the user to select the Logical path and file name from screen.so that he can create the file and seved in selected logical path.{path used must be from Instance profile DIR_LOGGING
-
Mountain Lion appears to break VNC connection to a headless mac mini.
I connect to my headless mac mini with VNC. Under lion this worked perfectly. With Mountain Lion on my mac mini I can connect but many windows do not update properly. If I connect an external display to the mac mini all is well again. Any solutio
-
Can old compensation module and ECM co-exist in SAP
Hi All, Do you know if old Compensation module and ECM can co-exist in an SAP instance. My client is on 4.7 and they have implemented one bonus plan using the old compensation module in the past but would like to configure additional comp plans using
-
Evernote, kakaotalk, and many other apps NOT supported for bb10??
is it just me or are there others who run into 'not supported' when trying to download app? my q10 allows me to add Evernote account but when i search for the actual app in the bbWorld, it does not exist. When trying to download from Evernote website
-
How does one initially start a project as a circle?
I'm trying to start a new project however I'm new to photoshop and the only option when i go to a new project is a width and height. There is no option for radius. Does anyone know how to start a project as a circle?