Cannot start oss
When I use soundon, it will say:
Relinking OSS kernel modules for "2.6.26-ARCH SMP preempt mod_unload 686 "
This may take few moments - please stand by...
OSS build environment set up for REGPARM kernels
Building module osscore
Failed to compile OSS
make -C /lib/modules/2.6.26-ARCH/build M=/usr/lib/oss/build modules
make[1]: Entering directory `/usr/src/linux-2.6.26-ARCH'
CC [M] /usr/lib/oss/build/osscore.o
/usr/lib/oss/build/osscore.c: In function 'init_proc_fs':
/usr/lib/oss/build/osscore.c:288: error: 'proc_root' undeclared (first use in this function)
/usr/lib/oss/build/osscore.c:288: error: (Each undeclared identifier is reported only once
/usr/lib/oss/build/osscore.c:288: error: for each function it appears in.)
/usr/lib/oss/build/osscore.c: In function 'uninit_proc_fs':
/usr/lib/oss/build/osscore.c:311: error: 'proc_root' undeclared (first use in this function)
make[2]: *** [/usr/lib/oss/build/osscore.o] Error 1
make[1]: *** [_module_/usr/lib/oss/build] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.26-ARCH'
make: *** [default] Error 2
Relinking the OSS kernel modules failed
Why? I used to use OSS. But now it doesn't work... How can I fix it?
I tried to find if there was a newer version on the official site, but it seemed that there wasn't any newer versions.
But I've never installed the package called "oss-linux-free"...
I have downloaded "oss-linux-v4.0-1016-i386.tar.bz2" from the official website. And I used "cd / && tar xvf oss-linux-v4.0-1016-i386.tar.bz2" to extract the file. In the past, it would be all right when I had run "soundon". But now, whatever I do, it still doesn't work at all....
Last edited by xjqw (2008-08-31 09:09:00)
Similar Messages
-
Urgent: cannot start the shadow instance at phase STARTSAP_TRANS
We are upgrading to NW2004s (ABAP only) from 640.
<u><b>How to re-start the shadow instance?</b></u>
At this point, <b>anyway we cannot start the shadow instance.</b>
At SAPMMC, the disp+work
1) first show "running but the dialog queue standstill"
2) then show" running but not connected to the message server"
3) then the disp+work dies.
Above happens in 1 minute after re-start.
<b>The dev_ms reads:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4740] Mon Apr 02 15:07:53 2007
[Thr 4740] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 94
intno 20050900
make: multithreaded, ASCII, optimized
pid 2932
[Thr 4740] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2932) [msxxserv.c 1824]
[Thr 4740] load acl file = D:\usr\sap\put\XYZ\SYS\global\ms_acl_info.DAT
[Thr 4740] MsGetOwnIpAddr: my host addresses are :
[Thr 4740] 1 : [10.10.10.68] houston (HOSTNAME)
[Thr 4740] 2 : [127.0.0.1] houston.monet.local (LOCALHOST)
[Thr 4740] Mon Apr 02 15:07:54 2007
[Thr 4740] MsHttpInit: full qualified hostname = houston.monet.local
[Thr 4740] HTTP logging is switch off
[Thr 4740] MsHttpOwnDomain: own domain[1] = monet.local
[Thr 4740] ms/icf_info_server : deleted
[Thr 4740] *** I listen to port sapmsSHDXYZ (3660) ***
[Thr 4740] CUSTOMER KEY: >B0790292062<
[Thr 4740] Mon Apr 02 15:08:54 2007
[Thr 4740] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from houston_XYZ_60 [msxxserv.c 4679]
[Thr 4740] Mon Apr 02 15:19:35 2007
[Thr 4740] *** ERROR => MsSCheckConnections: no response from client C0 (10.10.10.68) after 300 secs received [msxxserv.c 3165]
[Thr 4740] *** ERROR => MsSCheckConnections: disconnect now [10.10.10.68] [msxxserv.c 3169]</b>
The dev_disp reads:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 60
sid XYZ
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 4036
Mon Apr 02 15:07:53 2007
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (60 4036) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Apr 02 15:07:58 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >houston_XYZ_60 <
DpShMCreate: sizeof(wp_adm) 19888 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05BF0040, size: 4240712)
DpShMCreate: allocated sys_adm at 05BF0040
DpShMCreate: allocated wp_adm at 05BF1A28
DpShMCreate: allocated tm_adm_list at 05BF67D8
DpShMCreate: allocated tm_adm at 05BF6808
DpShMCreate: allocated wp_ca_adm at 05F66A98
DpShMCreate: allocated appc_ca_adm at 05F6B0E8
DpShMCreate: allocated comm_adm at 05F6C858
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05FED708
DpShMCreate: allocated gw_adm at 05FED748
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05FED778
DpShMCreate: allocated wall_adm at 05FED780
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12314]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( houston) [dpxxdisp.c 11663]
DpStartStopMsg: send start message (myname is >houston_XYZ_60 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 95
Release check o.K.
Mon Apr 02 15:08:38 2007
ERROR => W0 (pid 1084) died [dpxxdisp.c 14318]
ERROR => W1 (pid 4200) died [dpxxdisp.c 14318]
ERROR => W2 (pid 3316) died [dpxxdisp.c 14318]
ERROR => W3 (pid 5276) died [dpxxdisp.c 14318]
ERROR => W4 (pid 5348) died [dpxxdisp.c 14318]
ERROR => W5 (pid 3436) died [dpxxdisp.c 14318]
ERROR => W6 (pid 3920) died [dpxxdisp.c 14318]
ERROR => W7 (pid 4868) died [dpxxdisp.c 14318]
ERROR => W8 (pid 5380) died [dpxxdisp.c 14318]
ERROR => W9 (pid 4584) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1f --> 0x1e
ERROR => W10 (pid 4188) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1e --> 0x1c
ERROR => W11 (pid 2700) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x1c --> 0x18
ERROR => W12 (pid 4604) died [dpxxdisp.c 14318]
ERROR => W13 (pid 4916) died [dpxxdisp.c 14318]
ERROR => W14 (pid 4440) died [dpxxdisp.c 14318]
ERROR => W15 (pid 4544) died [dpxxdisp.c 14318]
ERROR => W16 (pid 1888) died [dpxxdisp.c 14318]
ERROR => W17 (pid 548) died [dpxxdisp.c 14318]
ERROR => W18 (pid 2800) died [dpxxdisp.c 14318]
ERROR => W19 (pid 2080) died [dpxxdisp.c 14318]
ERROR => W20 (pid 2888) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x18 --> 0x10
ERROR => W21 (pid 5572) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:48 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Apr 02 20:08:48 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1084 Ended no 1 0 0
1 DIA 4200 Ended no 1 0 0
2 DIA 3316 Ended no 1 0 0
3 DIA 5276 Ended no 1 0 0
4 DIA 5348 Ended no 1 0 0
5 DIA 3436 Ended no 1 0 0
6 DIA 3920 Ended no 1 0 0
7 DIA 4868 Ended no 1 0 0
8 DIA 5380 Ended no 1 0 0
9 DIA 4584 Ended no 1 0 0
10 UPD 4188 Ended no 1 0 0
11 ENQ 2700 Ended no 1 0 0
12 BTC 4604 Ended no 1 0 0
13 BTC 4916 Ended no 1 0 0
14 BTC 4440 Ended no 1 0 0
15 BTC 4544 Ended no 1 0 0
16 BTC 1888 Ended no 1 0 0
17 BTC 548 Ended no 1 0 0
18 BTC 2800 Ended no 1 0 0
19 BTC 2080 Ended no 1 0 0
20 BTC 2888 Ended no 1 0 0
21 SPO 5572 Ended no 1 0 0
Dispatcher Queue Statistics Mon Apr 02 20:08:48 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Apr 02 20:08:48 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Apr 02 20:08:48 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:53 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >houston_XYZ_60 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2072) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2072 HANDLE:1580)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1609
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Apr 02 15:08:54 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2072 HANDLE:1580)
DpStartStopMsg: send stop message (myname is >houston_XYZ_60 <)
NiIMyHostName: hostname = 'houston'
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Mon Apr 02 15:08:55 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11976]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1488 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1488 (pos=2)
SiSelNRemove: removed sock 1488
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
XYZvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
XYZvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1488
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4036) [dpxxdisp.c 10333]
Good Bye .....
<b>The dev_w21 reads:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Mon Apr 02 15:08:01 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.87)
B New connection 0 created
M sysno 60
M sid XYZ
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 5572
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 5572) [dpxxdisp.c 1301]
I
I Mon Apr 02 15:08:02 2007
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 19888 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 063F0040, size: 4240712)
M DpShMCreate: allocated sys_adm at 063F0040
M DpShMCreate: allocated wp_adm at 063F1A28
M DpShMCreate: allocated tm_adm_list at 063F67D8
M DpShMCreate: allocated tm_adm at 063F6808
M DpShMCreate: allocated wp_ca_adm at 06766A98
M DpShMCreate: allocated appc_ca_adm at 0676B0E8
M DpShMCreate: allocated comm_adm at 0676C858
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 067ED708
M DpShMCreate: allocated gw_adm at 067ED748
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 067ED778
M DpShMCreate: allocated wall_adm at 067ED780
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host houston
M
M Mon Apr 02 15:08:03 2007
M calling db_connect ...
C Thread ID:4020
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 87
C patchcomment MSSQL: UTAB/ATAB/Dynp-access via clientside cursor (1002914)
C np:(local) connection used on houston
C CopyLocalParameters: dbuser is 'XYZ_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Can't use MARS (on sql 8.0). Reconnecting without MARS functionality.
C Using Provider SQLNCLI
C Provider Release:9.00.1399.06
C Using Provider SQLNCLI
C CheckCodepageType: line 24329. hr: 0x80040e37 Invalid object name 'DBPROPERTIES'.
C sloledb.cpp [CheckCodepageType,line 24329]: Error/Message: (err 208, sev 16), Invalid object name 'DBPROPERTIES'.
C Procname: [CheckCodepageType -- no proc]
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 500 dynamic statements (2724000 bytes), total 29444052 bytes
C Initializing shared procedure name cache houston_XYZXYZ_XYZ_SHD_MEM.
C procedure cache created/attached
C PSP: 0 procedure names registered
C Connected to db server : [houston] server_used : [np:(local)], dbname: XYZ, dbuser: XYZ
C pn_id:houston_XYZXYZ_XYZ_SHD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070402 150803 houston
C The IRow interface is supported by this OLEDB provider
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 8180, sev 0), Statement(s) could not be prepared.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C sloledb.cpp [ParamStmtExec,line 12988]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
C Procname: [##YshoustonXYZ00000055720000000001150803]
C ParamStmtExec failed. HR 80040e14 DBSL retcode 103. stmt: [SELECT TOP 1 VERSION FROM SVERS ]
C Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum: 112156
C DbSlRead - Error 103 (dbcode 208) on open
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
C DbSlRead - Error 103 (dbcode 208) on fetch
C DbSlRead - <##YshoustonXYZ00000055720000000001150803>
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10240]
M
M Info for wp 21
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_SPOWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server houston_XYZ_60 on host houston (wp 21)
M * ERROR ThInit: db_connect
M *
M * TIME Mon Apr 02 15:08:03 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc21 5572) [dpnttool.c 327]</b>
On SDN there are many discussions about similar errors but none
of them fits our situation.
Please give your advice. Points will be given.
Thanks!Target SAP system is ADC
Enter the SAP instance number [59]:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:20:45 PM
> INSTANCE NUMBER = 59
Type of database system is MSS
>>>>>>>>>> Input Wizard <<<<<<<<<<
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 =
? MOUNT POINT 02 =
? MOUNT POINT 03 =
? MOUNT POINT 04 =
? MOUNT POINT 05 =
? MOUNT POINT 06 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 07 =
? MOUNT POINT 08 =
? MOUNT POINT 09 =
? MOUNT POINT 10 =
? MOUNT POINT 11 =
? MOUNT POINT 12 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 13 =
? MOUNT POINT 14 =
? MOUNT POINT 15 =
? MOUNT POINT 16 =
? MOUNT POINT 17 =
? MOUNT POINT 18 =
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 19 =
? MOUNT POINT 20 =
? MOUNT POINT 21 =
? MOUNT POINT 22 =
? MOUNT POINT 23 =
? MOUNT POINT 24 =
Waiting for input since Mar 22, 2007 1:20:49 PM
> MOUNT POINT 12 = D:\D12\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 23 = D:\D23\51032247
> MOUNT POINT 18 = D:\D18\NW_2004s_SR2_liveCache_7.6.00_Bd._29
> MOUNT POINT 15 = D:\D15\NW_2004s_SR2_Upgrade_Master
> MOUNT POINT 09 = D:\D9
> MOUNT POINT 14 = D:\D14\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 01 = D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 08 = D:\D8\SAP_CRM_5.0_SR2_Languages
> MOUNT POINT 20 = D:\D20\NW_2004s_SR2_Languages
> MOUNT POINT 03 = C:\D3\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 06 = C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86
> MOUNT POINT 10 = D:\D10
> MOUNT POINT 17 = D:\D17\51032257
> MOUNT POINT 21 = D:\D21\NW_2004s_SR2_Languages
> MOUNT POINT 19 = D:\D19\51032257
> MOUNT POINT 05 = C:\D5\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 04 = C:\D4\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 11 = D:\D11\SAP_CRM_5.0_SR2_Installation_Export
> MOUNT POINT 07 = D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master
> MOUNT POINT 24 = D:\D24
> MOUNT POINT 02 = C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export
> MOUNT POINT 22 = D:\D22\NW_2004s_SR2_Languages
> MOUNT POINT 16 = D:\D16\BS_2005_SR2_SAP_Installation_Master
> MOUNT POINT 13 = D:\D13\SAP_CRM_5.0_SR2_Installation_Export
Reading data from "Upgrade Master CD/DVD"...
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:24:47 PM
> cancel
Connection to SAPup was closed
Target SAP system is ADC
Enter the SAP instance number [59]:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:28:34 PM
> INSTANCE NUMBER = 59
Type of database system is MSS
Reading data from "Upgrade Master CD"...
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\DBINDEP\CTRL700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR" to "D:\usr\sap\put" ...
Archive D:\D7\SAP_CRM_5.0_SR2_Upgrade_Master\UMN_WINDOWS_I386\MSS\UPTOOLS2.SAR successfully unpacked to D:\usr\sap\put.
Welcome to the SAP upgrade control program.
Important information for this upgrade is included
in the upgrade Note and further Notes mentioned therein.
Refer to the upgrade manual for the number of this note.
It is advisable to obtain this Note before starting any process
since it also contains important information about preparing
the upgrade.
It is essential that you get a current version of this Note
before starting the upgrade with SAPup. It contains a keyword
which is necessary to start the upgrade procedure.
Please look into the SAP Service Marketplace or, if not available,
use the form in your packet to request the upgrade Note.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:28:43 PM
> continue
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
500 of BBPCRM
2005_1_700 of PI_BASIS
700 of SAP_ABA
700 of SAP_AP
700 of SAP_BASIS
700 of SAP_BW
2005_1_700 of ST-PI
Target SAP system is ADC, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:28:50 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:28:54 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input initial yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:28:56 PM
> Parameter input initial yes
You selected the following PREPARE modules:
Parameter input
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
Waiting for input since Mar 22, 2007 1:28:59 PM
> execute
Execution of PREPARE module Parameter input begins at 20070322142901
>> 14:29:01 PREPARE: START OF PHASE BEGIN_PRE
Generating html phase list files 'phase_toc.html' and 'phaselist.html'
>> 14:29:01 PREPARE: END OF PHASE BEGIN_PRE
>> 14:29:01 PREPARE: START OF PHASE KEY_CHK
Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
Archive successfully unpacked.
Enter the SAPup keyword of note 961511
? SAPup keyword =
Waiting for input since Mar 22, 2007 1:29:02 PM
> SAPup keyword = 19327784
>> 14:37:23 PREPARE: END OF PHASE KEY_CHK
>> 14:37:23 PREPARE: START OF PHASE EXTRACTKRN_PRE
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exe.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exe" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exe.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exe" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exe.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exe" ...
Done.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exe" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPMMC.SAR successfully unpacked to D:\usr\sap\put\exenew.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\UNINSTSAP.EXE" to "D:\usr\sap\put\exenew" ...
Done.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\SAPEXE.SAR successfully unpacked to D:\usr\sap\put\exenew.
Extracting archive "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR" to "D:\usr\sap\put\exenew" ...
Archive C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\MSS\SAPEXEDB.SAR successfully unpacked to D:\usr\sap\put\exenew.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSEXE.SAR" to "D:\usr\sap\put\exenew" ...
Done.
Copying file "C:\D6\NW_2004s_SR2_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_I386_AUPG\DBINDEP\IGSHELPER.SAR" to "D:\usr\sap\put\exenew" ...
Done.
>> 14:40:10 PREPARE: END OF PHASE EXTRACTKRN_PRE
>> 14:40:10 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system:
? SAP SYSTEM ID =
The hostname of your central SAP server:
? SAP SYSTEM HOST =
Enter the SAP instance number:
? INSTANCE NUMBER =
Waiting for input since Mar 22, 2007 1:40:10 PM
> INSTANCE NUMBER = 59
> SAP SYSTEM HOST = damascus
> SAP SYSTEM ID = ADC
The system identifier of your database:
? DATABASE ID =
The hostname of your database server:
? DATABASE HOST =
Waiting for input since Mar 22, 2007 1:43:59 PM
> DATABASE HOST = damascus
> DATABASE ID = ADC
Executing script MSSCONCHECK ...
Supply the following information:
The password for SAP user DDIC in client 000
(may be 19920706):
? DDIC PASSWORD =
Verify password for SAP user DDIC:
? DDIC PASSWORD =
Waiting for input since Mar 22, 2007 1:44:03 PM
> DDIC PASSWORD = <hidden input>
> DDIC PASSWORD = <hidden input>
The hostname of your batch server:
? BATCH HOST =
Waiting for input since Mar 22, 2007 1:44:14 PM
> BATCH HOST = damascus
Supply the following information:
The maximum number of parallel processes during uptime:
? MAXIMUM UPTIME PROCESSES =
The number of parallel import processes:
? R3TRANS PROCESSES =
The maximum profile value of "bufreftime":
? MAXIMUM SYNC TIME =
Waiting for input since Mar 22, 2007 1:44:16 PM
> R3TRANS PROCESSES = 3
> MAXIMUM SYNC TIME = 120
> MAXIMUM UPTIME PROCESSES = 1
The password for Operating System account .\SAPServiceADC:
? PASSWORD =
Verification of the password for Operating System account .\SAPServiceADC:
? PASSWORD =
Waiting for input since Mar 22, 2007 1:44:19 PM
> PASSWORD = <hidden input>
> PASSWORD = <hidden input>
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
Executing script MSSUPGSPS ...
Executing script MSSINCHK ...
>> 14:44:43 PREPARE: END OF PHASE INITPUT_PRE
>> 14:44:43 PREPARE: START OF PHASE DBCHK_PRE
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
Is there more than one system running in this database?
(MCOD: Multiple components in one database)
? no
? yes
Waiting for input since Mar 22, 2007 1:44:45 PM
> no
>> 14:44:49 PREPARE: END OF PHASE DBCHK_PRE
>> 14:44:49 PREPARE: START OF PHASE CONFCHK_IMP
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
>> 14:44:50 PREPARE: END OF PHASE CONFCHK_IMP
>> 14:44:50 PREPARE: START OF PHASE SOLMAN_CHK
The SAP Solution Manager Key is required for the upgrade.
Further informations can be found in the upgrade guide,
the SAP Service Marketplace and SAP note 805390!
? continue
? cancel
Waiting for input since Mar 22, 2007 1:44:50 PM
> continue
? SAP Solution Manager Key =
Waiting for input since Mar 22, 2007 1:44:53 PM
> SAP Solution Manager Key = 12D8B10981
>> 14:45:14 PREPARE: END OF PHASE SOLMAN_CHK
>> 14:45:14 PREPARE: START OF PHASE CHKSYSTYPE
>> 14:45:14 PREPARE: END OF PHASE CHKSYSTYPE
>> 14:45:14 PREPARE: START OF PHASE HIAV_CHK
>> 14:45:14 PREPARE: END OF PHASE HIAV_CHK
>> 14:45:15 PREPARE: START OF PHASE J2EE_CHK1
>> 14:45:15 PREPARE: END OF PHASE J2EE_CHK1
>> 14:45:15 PREPARE: START OF PHASE REQ_J2EEUPG
>> 14:45:15 PREPARE: END OF PHASE REQ_J2EEUPG
>> 14:45:15 PREPARE: START OF PHASE SETSYNC_PREP_STARTED
>> 14:45:15 PREPARE: END OF PHASE SETSYNC_PREP_STARTED
>> 14:45:15 PREPARE: START OF PHASE REQ_READNOTE
>> 14:45:15 PREPARE: END OF PHASE REQ_READNOTE
>> 14:45:15 PREPARE: START OF PHASE INIT_CBU
>> 14:45:15 PREPARE: END OF PHASE INIT_CBU
>> 14:45:15 PREPARE: START OF PHASE CHECKGROUP_END0
Execution of PREPARE module Parameter input ends at 20070322144515
Execution of the selected PREPARE modules finished
with the statuses as follows:
'Parameter input' status: succeeded
Please see file D:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:45:15 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:45:23 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization initial yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:45:26 PM
> Initialization initial yes
You selected the following PREPARE modules:
Initialization
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
? display CHECKS.LOG
Waiting for input since Mar 22, 2007 1:45:30 PM
> execute
Execution of PREPARE module Initialization begins at 20070322144532
>> 14:45:32 PREPARE: START OF PHASE INITCURENV
>> 14:45:32 PREPARE: END OF PHASE INITCURENV
>> 14:45:32 PREPARE: START OF PHASE DBCHK_INI
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getdbinfo ADC
>> 14:45:34 PREPARE: END OF PHASE DBCHK_INI
>> 14:45:34 PREPARE: START OF PHASE RFCCHK_INI
>> 14:45:34 PREPARE: END OF PHASE RFCCHK_INI
>> 14:45:34 PREPARE: START OF PHASE VERSCHK_INI
>> 14:45:34 PREPARE: END OF PHASE VERSCHK_INI
>> 14:45:34 PREPARE: START OF PHASE VALCHK_INI
>> 14:45:35 PREPARE: END OF PHASE VALCHK_INI
>> 14:45:35 PREPARE: START OF PHASE TOOLVERSION_INI
>> 14:45:36 PREPARE: END OF PHASE TOOLVERSION_INI
>> 14:45:36 PREPARE: START OF PHASE UNICODE_CHK_PRE
>> 14:45:36 PREPARE: END OF PHASE UNICODE_CHK_PRE
>> 14:45:36 PREPARE: START OF PHASE TOOLVERSION_UPG1
>> 14:46:00 PREPARE: END OF PHASE TOOLVERSION_UPG1
>> 14:46:00 PREPARE: START OF PHASE DBCONNCHK_INI
Checking DB connect with 'D:\usr\sap\put\exe\R3trans.exe'.
>> 14:46:00 PREPARE: END OF PHASE DBCONNCHK_INI
>> 14:46:00 PREPARE: START OF PHASE SETSYNC_INFO_FINISHED
>> 14:46:00 PREPARE: END OF PHASE SETSYNC_INFO_FINISHED
>> 14:46:00 PREPARE: START OF PHASE UCMIG_DECISION
Your system is configured as a non-Unicode SCP (Single Code Page) configuration.
If you plan to perform a Unicode Conversion after the upgrade, you may choose to perform a combined
Upgrade and Unicode Conversion.
In this case, several of the migration preparation steps can be done already on the start release
or on the upgrade shadow system.
For further information, please refer to OSS note 928729.
Do you want to perform a combined Upgrade and Unicode Conversion?
? Yes
? No
Waiting for input since Mar 22, 2007 1:46:06 PM
> No
>> 14:48:04 PREPARE: END OF PHASE UCMIG_DECISION
>> 14:48:04 PREPARE: START OF PHASE CLNT_CHK_INI
>> 14:48:09 PREPARE: END OF PHASE CLNT_CHK_INI
>> 14:48:09 PREPARE: START OF PHASE PATCH_CHK1
>> 14:48:15 PREPARE: END OF PHASE PATCH_CHK1
>> 14:48:15 PREPARE: START OF PHASE INTCHK_INI
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxttent ADC
running D:\usr\sap\ADC\SYS\exe\run\tp.exe pf=D:\usr\sap\put\bin\DEFAULT.TPP getddxtfent ADC
>> 14:48:15 PREPARE: END OF PHASE INTCHK_INI
>> 14:48:15 PREPARE: START OF PHASE ADJ_CNTRANS
Calling R3trans to import 'RSUPDTEC.60X'.
Waiting 130 seconds for buffer synchronization ...
working ...
>> 14:50:38 PREPARE: END OF PHASE ADJ_CNTRANS
>> 14:50:38 PREPARE: START OF PHASE INIT_CNTRANS
>> 14:50:38 PREPARE: END OF PHASE INIT_CNTRANS
>> 14:50:38 PREPARE: START OF PHASE CNTRANS_PRE
>> 14:50:38 PREPARE: END OF PHASE CNTRANS_PRE
>> 14:50:38 PREPARE: START OF PHASE DMPSPC_INI
>> 14:50:38 PREPARE: END OF PHASE DMPSPC_INI
>> 14:50:38 PREPARE: START OF PHASE JOB_RSDB4090
>> 14:50:38 PREPARE: END OF PHASE JOB_RSDB4090
>> 14:50:38 PREPARE: START OF PHASE CHK_DB6_REG_PRE
>> 14:50:38 PREPARE: END OF PHASE CHK_DB6_REG_PRE
>> 14:50:39 PREPARE: START OF PHASE CHK_DB6_PAR_INI
>> 14:50:39 PREPARE: END OF PHASE CHK_DB6_PAR_INI
>> 14:50:39 PREPARE: START OF PHASE SPACECHK_INI
Executing script MSSSPACE ...
>> 14:50:39 PREPARE: END OF PHASE SPACECHK_INI
>> 14:50:39 PREPARE: START OF PHASE KRNCHK_DEST
>> 14:50:39 PREPARE: END OF PHASE KRNCHK_DEST
>> 14:50:39 PREPARE: START OF PHASE DBPREP_CHK
>> 14:50:39 PREPARE: END OF PHASE DBPREP_CHK
>> 14:50:39 PREPARE: START OF PHASE EXECCV
>> 14:50:44 PREPARE: END OF PHASE EXECCV
>> 14:50:44 PREPARE: START OF PHASE EXECAV
>> 14:50:50 PREPARE: END OF PHASE EXECAV
>> 14:50:50 PREPARE: START OF PHASE COMPINFO_INI
>> 14:50:50 PREPARE: END OF PHASE COMPINFO_INI
>> 14:50:50 PREPARE: START OF PHASE ADDON_CHK
>> 14:50:50 PREPARE: END OF PHASE ADDON_CHK
>> 14:50:50 PREPARE: START OF PHASE ADDON_INFO
>> 14:50:50 PREPARE: END OF PHASE ADDON_INFO
>> 14:50:50 PREPARE: START OF PHASE ADDON_SPEC1
>> 14:50:55 PREPARE: END OF PHASE ADDON_SPEC1
>> 14:50:56 PREPARE: START OF PHASE ADDON_TREAS
>> 14:50:56 PREPARE: END OF PHASE ADDON_TREAS
>> 14:50:56 PREPARE: START OF PHASE ADDON_WFM
>> 14:51:01 PREPARE: END OF PHASE ADDON_WFM
>> 14:51:01 PREPARE: START OF PHASE ADDON_DMC
>> 14:51:01 PREPARE: END OF PHASE ADDON_DMC
>> 14:51:01 PREPARE: START OF PHASE ACE_CHK
>> 14:51:01 PREPARE: END OF PHASE ACE_CHK
>> 14:51:02 PREPARE: START OF PHASE CRM_BILL
>> 14:51:02 PREPARE: END OF PHASE CRM_BILL
>> 14:51:02 PREPARE: START OF PHASE PR_DBPAR
>> 14:51:02 PREPARE: END OF PHASE PR_DBPAR
>> 14:51:02 PREPARE: START OF PHASE CHECKGROUP_END1
Execution of PREPARE module Initialization ends at 20070322145102
Execution of the selected PREPARE modules finished
with the statuses as follows:
'Initialization' status: succeeded
Please see file D:\usr\sap\put\log\CHECKS.LOG
for the actions which have to be performed.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:51:02 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:51:41 PM
> continue
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization succeeded yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:51:41 PM
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/2 upgrade to release
500 of BBPCRM
2005_1_700 of PI_BASIS
700 of SAP_ABA
700 of SAP_AP
700 of SAP_BASIS
700 of SAP_BW
2005_1_700 of ST-PI
Target SAP system is ADC, MSSQL database
SAPup started in PREPARE mode.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:58:46 PM
> continue
The following options are available:
select: Display screen for selecting PREPARE modules
status: Display the statuses of the PREPARE modules
exit: Exit PREPARE
help: Getting help about PREPARE
? select
? status
? exit
Waiting for input since Mar 22, 2007 1:58:53 PM
> select
Select the PREPARE modules
? name status mandatory
? Parameter input succeeded yes
? Initialization succeeded yes
? Import initial yes
? Extension initial yes
? Integration initial yes
? Installation initial yes
? General checks initial yes
? Activation checks initial yes
? Necessary checks for conversions initial yes
? Optional checks for conversions initial no
? Modification support initial no
? Pre-processing initial no
Waiting for input since Mar 22, 2007 1:58:56 PM
> Import initial yes
You selected the following PREPARE modules:
Import
execute: Execute the selected PREPARE modules.
Make sure that you have carried out the actions described in
D:\usr\sap\put\log\CHECKS.LOG before continuing.
(Note: The contents of file CHECKS.LOG are saved
in D:\usr\sap\put\log\CHECKS.SAV)
select: Display screen for selecting PREPARE modules.
exit: Exit PREPARE.
help: Getting help about PREPARE modules.
? execute
? select
? exit
? display CHECKS.LOG
Waiting for input since Mar 22, 2007 1:59:00 PM
> execute
Execution of PREPARE module Import begins at 20070322145902
>> 14:59:02 PREPARE: START OF PHASE REQIMPORT
The PREPARE module Import will be started now.
During this module programs, structures, and table entries
required by PREPARE are imported (the socalled "tool import").
Note: This can cause a loss of performance in R/3
In rare cases, a concurrent transport via the transport directory
may disturb the tool import. Please avoid any concurrent import
during this PREPARE module.
? continue
? cancel
Waiting for input since Mar 22, 2007 1:59:02 PM
> continue
>> 14:59:05 PREPARE: END OF PHASE REQIMPORT
>> 14:59:05 PREPARE: START OF PHASE READDATA
Trying to find archive files ...
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC7000.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC700X.SAR successfully unpacked to D:\usr\sap\put.
Extracting archive "D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR" to "D:\usr\sap\put" ...
Archive D:\D1\SAP_CRM_5.0_SR2_Upgrade_Export\UPG1\DBINDEP\MISC_SP.SAR successfully unpacked to D:\usr\sap\put.
Trying to find archive files ...
Extracting archive "C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR" to "D:\usr\sap\put" ...
Archive C:\D2\SAP_CRM_5.0_SR2_Upgrade_Export\UPG2\DBINDEP\MISC700I.SAR successfully unpacked to D:\usr\sap\put.
>> 14:59:40 PREPARE: END OF PHASE READDATA
>> 14:59:40 PREPARE: START OF PHASE READDATA_EXT
Trying to find archive files ...
>> 14:59:41 PREPARE: END OF PHASE READDATA_EXT
>> 14:59:41 PREPARE: START OF PHASE TOOLFIX_CHK
Correction package 'D:\usr\sap\put\FIX_CRM50SR2.UPG' found, extracting to 'D:\usr\sap\put'
Archive successfully unpacked.
>> 14:59:42 PREPARE: END OF PHASE TOOLFIX_CHK
>> 14:59:42 PREPARE: START OF PHASE CPYFIL0_CBU
>> 14:59:42 PREPARE: END OF P -
ERROR: password is router string,cannot start graphical screen painter
Hi Exprtts,
I remotely Login SAP at home and I want to edit the screen by screen painter. But the system pop-up a message : password is router string,cannot start graphical screen painter. But at office I can start the screen painter and edit the screen.
Any one can tell me why and how to solve this problem??Thanks in advance.
JoeDear Allen,
Please have a look at Below Note
SAP Note 898102 - Error message "Password in router string."
Solution in Note is given as below.
SAPGUI Release 620: Import GUI patch 59.
SAPGUI Release 640: Import GUI patch 16.
SAPGUI Release 710: Import GUI patch 03.
Hope This Solve your Issue.
If required also See OSS notes 204910 and 101971
Regards,
Lijo joseph
Message was edited by:
Lijo Vazhappilly -
Fixbspflvr_nt64.exe cannot start or run due to incompatibility with 64-bit
Hello Folks,
Before doing an upgrade from DB2 9.5 FP 4 to 9.7 FP 2, when executed fixbspflvr_nt64.exe as per SAP Note 1332109 got
the following message:
"The program or feature fixbspflvr\fixbspflvr_nt64.exe" cannot start or run due to incompatibility with 64-bit versions of Windows. Please contact the software vendor to ask if a 64-bit Windows copatible version is available"
We are using AMD64 hardware. Did some one had the same issue and got resolution, please share...
Thanks,
ShyamHi Shyam,
Did you get any solution from SAP?
I am facing the same problem. I am unable to start my upgrade. I have raised SAP OSS message but I am yet to recieve a reply.
The tool is no longer available on IBM website too as they have released Fix pack 3.
Yuur help will be appreciated.
Thanks and Regards,
Karan Shah -
Se80 cannot start graphical screen painter
Hi experts:
When I open graphical painter, I counter a problem message 'password in router string.cannot start graphical screen painter' of gnetx.exe, Who can solve it,TKS.
AllenDear Allen,
Please have a look at Below Note
SAP Note 898102 - Error message "Password in router string."
Solution in Note is given as below.
SAPGUI Release 620: Import GUI patch 59.
SAPGUI Release 640: Import GUI patch 16.
SAPGUI Release 710: Import GUI patch 03.
Hope This Solve your Issue.
If required also See OSS notes 204910 and 101971
Regards,
Lijo joseph
Message was edited by:
Lijo Vazhappilly -
"Device Cannot Start - Code 10" - Windows Vista Error, w/ 2nd Gen. Nano
I'm having trouble with my Nano and Windows Vista. The computer is recognizing the iPod just fine and seeing all of my songs, but nothing will play and the diamond bar does not move. I can't hear previews online either.
Under device manager, a yellow "!" shows up for the iPod, and it says "Device Cannot Start - Code 10" when I check. All of my drivers and updates are current as of today. So is iTunes. Any thoughts?
It worked before, but now it's not.This is a reasonably common error on a PC when there is a problem with either a USB device, your USB cables or hardware, or the system drivers.
In a case where, as you say, the device works properly with other computers, the problem is more likely to be with the hardware or drivers on the computer you're trying to connect to.
See this site for some hints:
http://www.pchell.com/hardware/usbcode10.shtml
I found it via a web search; I don't have any connection to that site.
The good news is that your iPhone is probably fine. -
Audacious, skin problem. Cannot start.
Hello.
I just installed Audacious player, but I cannot start it. When I try to run the player, I get the following error message:
Unable to load skin.
Check that skin at '(null)' is usable and default scin is properly installed at '/usr/share/audacious/Skins/Default'.
I have the default skin in /usr/share/audacious/Skins/Default directory. I do not know what the first part of the message means (Check that skin at '(null)' is usable...). Can someone give me a hand.
I do not know what else information to post. If you need to know anything for my system, I will post the info. I have Arch GNU/Linux Core Dump, kernel: 2.6.24-ARCH. The system is installed as "Basic", I am using fluxbox ... If you need anything else ...
Regards.OT: I'm sorry. I just couldn't help laughing at the subject, which makes perfect sense within the Linux context but which sounds truly bizarre otherwise.
-
Installation of Oracle 11g on RHEL 5 (Listener cannot start )
Hello,
I have install Oracle 11g on my linux RHEL5. The installation was succesfull but cannot start the listener. The configuration of even the EM at the end of the installation for the same reason , Listener not started.
Trying to connect to my Listener i got the following error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=karen)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCPS)(HOST=karen)(PORT=2484)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
LSNRCTL> start
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNS-12537: TNS:connection closed
TNS-12560: TNS:protocol adapter error
TNS-00507: Connection closed
Linux Error: 29: Illegal seek
Can Some help troubleshoot this problem.
ThanksDear bezgodo!
Please execute the following commands and compare the results.
1.
hostname --fqdn2.
nslookup <your_ip_address>In both cases you should see the fully qualified hostname of your server.
Yours sincerely
Florian W. -
how to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer
any suggestions?Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion -
I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.
Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
ERROR: Cannot start mail services, configuration directory does not exist
I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
Is this something to worry about?Hi Joel,
You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
Jeff -
Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/ -
My work e-mail has a double-login system, where my credentials for work access are one username and my e-mail is an alias of that first username, so they differ from one another. I suspect that's why I've been having the hardest time with Outlook 2013. I
was able to add my account just fine once but changed my mind about using Outlook and removed the account. Now I can't get back into Outlook for the life of me. The error messages that show up are:
1. It asks me to verify server and Mailbox. I've tried it with both usernames (the official work username and the e-mail alias) as my Mailbox info, followed by the email domain (even tried it without the domain) and it still won't verify when I click "Check
Name".
2. This message comes up: The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
3. Then once I click "OK" another pop-up says: Cannot start Microsoft Outlook. The file C:\Users\FirstLastname\AppData\Local\Microsoft\Outlook\FirstLastname.ost is not an Outlook data file (.ost).
Help?Hi,
As per this KB article, the issue might occurs when some required registry key does not exist on your computer.
Please try the steps mentioned in it and see if it is helpful to you:
http://support.microsoft.com/kb/2264398/en-us
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
I recently moved my iMovie Library and all of its contents to an external hard drive. I then erased the library and all of its contents from my iMac HD and created a new library. Now when I try to import video from my DV camera I get this message: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again. There is no way to set a storage location in Preferences. I have chosen an Event in the middle drop down box. But it still will not import. Any help will be greatly appreciated.
My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action. -
"User names cannot start with a number" error while adding a user
Is it possible to use WL Portal 7.0 admin framework to manage users with all numeric
user id ?
I got an error "User names cannot start with a number" while trying to add users
with all numeric user ids. I am using "portalAppTools" web app provided with WL
7.0 out of the box.
What "out the box" functionality do I need to change to make this happen ? Thanks
ShahThe problem is that when we have user groups starting with a number, then the search
feature doesn't work for user groups (case # 466837 with BEA).
So, which brings me to the following question:
a. Should the search feature work?
b. What is the limitation? I mean, it is designed not to allow user groups starting
with a number. So, there must be a reason for this. So, if we change "disallowFirstCharDigit",
will it have any impacts on Portal?
As an aside, it seems somewhat strange that the Portals can start with a number!
Thanks in advance
Venkatesh
"Ture Hoefner" <replyto@newsgroup> wrote:
Hello Shah,
Search your tools web app for the UsermgmtTools.properties file. In
my
installation, it is at:
D:\bea70sp1\weblogic700\samples\portal\sampleportalDomain\beaApps\sampleport
al\tools\WEB-INF\classes\com\bea\jsptools\p13n\usermgmt\servlets\jsp
It starts with this:
# Messages and other properties used by usermgmt jsp tools
# Name properties - UserBean and GroupBean
disallowedCharacters: ~`!$%^&-*() {}[]|\\/?<>,:;+="'
disallowFirstCharDigit: true
Ture Hoefner
BEA Systems, Inc.
www.bea.com
"Shah Sidi" <[email protected]> wrote in message
news:3db0a001$[email protected]..
Is it possible to use WL Portal 7.0 admin framework to manage userswith
all numeric
user id ?
I got an error "User names cannot start with a number" while tryingto add
users
with all numeric user ids. I am using "portalAppTools" web app providedwith WL
7.0 out of the box.
What "out the box" functionality do I need to change to make this happen?
Thanks
Shah
Maybe you are looking for
-
Hi I am working with a media company who are producing our responsive branding which includes bootstrap for a new publishing intranet. It occurred to me that I need to encourage consistency in the file locations regardless of if the files are provis
-
Hi, Is there any newsgroup for J2EE design patterns. TIA -VSK
-
At first, I thought it was just me. After a little reading, I see it's not. I love my iPad but this charging situation has to be fixed. After 6 hours of charging ( using supplied 10w charger plugged in to wall ), my iPad battery only regained 50% of
-
I'm following a tutorial from the CS6 Photoshop essential skills CD using the supplied images. When I am using the refine edge tool and going over the areas around the hair of my subject, my selections appear as they do in the tutorial but as soon as
-
Font selections displayed wrong after installing Infinality
Not sure where I went wrong but now when I choose a font in some apps (hexchat and xfce4-terminal at the moment), the font that I selected will not be the one that the app shows I selected. It appears that the correct font is being used after the sel