Cannot start program
I removed all earlier versions of Firefox (which I love!) and get this message after I reinstalled the latest version: "Application failed to start because app configuration is incorrect. Reinstalling the app may fix the problem." Well, reinstalling does not work. I cannot use Firefox because it won't install on my Windows XP system. Earlier versions used to work,now I cannot install. Please help!
I tried to install this PKGBUILD but it won't install because my system is 64 bit!
I also tried to install Virtualbox.
This works but this gives new problems :
- USB-warnings (even though I put the extra file in my fstab)
- no VTx-support (even thoug my CPU supports it and it is not disabled in bios)
- Linux mint 32 bit crashes during install in virtualbox
- virtual-box additions don't want to install.
I think I will give up making a photobook for my wife!
Similar Messages
-
IDX5 - System is not a central XI; cannot start program
hi all -
Did anyone come across this error message - "System is not a central XI; cannot start program" when trying to execute the tcode - IDX5 on the XI box?
I pushed an IDOC - MATMAS05 from IDOC to XI. It doesn't come into XI.
1. I checked the SM58 on the R/3 side. No Messages.
2. I checked the IDX5 transaction on the XI side, that's when i get the above error message.
3. I checked the IDX2 transaction on the XI side, i get this error "I:000" - Anyone knows what it means?
4. SXMB_MONI doesn't show up anything.
5. R/3 - pushed idocs shows a status of 3.
Any ideas where to look for and how to solve the problem -IDX5 and IDX2.
Environment:
1. We are using SAP NW 2004s
2. SAP BASIS Component - SAP_BASIS - Release 7.00
Thanks in advance,
TirumalHi,
I think port configuration in IDX1 may be not correct,
Anyway check out this SAP note- 940313
Also refer this analysis:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
Moorthy -
Reg:"System is not a central XI;cannot start program" Err
Hi..
I am trying to execute the transaction IDX5 on XI system and am getting the err "System is not a central XI;cannot start program".Can anyone please tell me the reason for this?Are you sure that you are executing TCODE on XI Server.
Normally this message is displayed for R3 Servers
Check SXMB_ADM --> Check the Integration Engine Configuration
In the Global Configuration Data :
Role of Business System should be Integration server
Corresponding IS should point to Pipeline URL
regards
Gangaprasad
Edited by: gangaprasad chintala on Nov 18, 2008 3:26 PM -
Cannot start programs Ink Crossword and Ink Desktop on Portege M400
Hi,
I have just purchased Portege M400 with XP tablet on it.
I updated it with SP3 and all relevnt MS updates.
I have tried to use the Ink Crossword and Ink desktop and they do not start at all.
If I try "Explore the experience pack" then the option screen comes up but when you click start the above programs you hear the click but nothing happens.
Interestingly snipping tool 2 does work!
I have downloaded the pack from MS and reinstalled it but still no good.
Any ideas anyone??
ThanksHmm did you install the Microsoft .NET Framework 1.1 on your system???
Microsoft recommends these minimum system requirements for Microsoft Experience Pack for Tablet PC 2005:
Windows XP for Tablet PC Edition 2005, English language
Microsoft .NET Framework 1.1
Windows Media Player 10 (required for Media Transfer)
At least 50 MB of available free space on your hard disk
Maybe you should also check some details and further info on this MS page:
http://www.microsoft.com/windowsxp/downloads/tabletpc/experiencepack/default.mspx -
Cannot start Programs Like Firefox Freezes and Beach ball spining
I dont know what happen yesterday firefox just crashed and when I tried to restart it it just bounces for a long time then freezes even yahoo im all the imers and then even when i go to disk utilites it freezes can some one please help me..
When you get your OS X disks from Apple, I would run the Apple hardware test first, to ensure you don't have an obvious hardware problem.
If you download OnyX, which is a good utility, you want to run the tasks on both the cleaning and maintenance tabs.
To provide additional help, you'll need to tell us more about your system, for example, which Powerbook you have, the amount of memory, the size of your hard drive, how much free space you have on the hard drive, what operating system you have on your machine, and what, if any, peripherals you have plugged into it. The System Profiler on your hard drive in applications/utilities can help provide this information. -
I am trying to install the newest version of Itunes and each time I repeatedly get the message "Program cannot start MSVCR80.dll is missing from your computer Try reinstalling to fix this problem". I have tried reinstalling several times and I get the same message . Any ideas? I am most appreciative. I am using Windows 7.
Hi 49balf,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy -
Cannot start non-apple programs
I just installed 10.4.7. Now it seems that I cannot start non-apple programs. Those programs give me the error "The application "Photoshop" could not be launched because of a shared library error: "-<application><CarbonLib><CFMPriv_PrintCore>"
I am used to my mac simply working.
Dual 2.5 G5 Mac OS X (10.4.7)fj40cruzerm,
Welcome to Apple Discussions.
Follow the procedures listed in
Resolving Disk, Permission, and Cache Corruption,
and Multiple applications quit
unexpectedly or fail to launch, by Dr. Smoke.
Let us know what happens.
;~)
Thank you for your suggestion, I am having the same exact problem, I will try your suggestions and let you know if that fixed my problem. -
I cannot start my cs4 program I get error message 148:3 can someone please help
I cannot start my cs4 program I get error message 148:3 can someone please help
Which operating system are you using?
If it's windows:
Error "Licensing has stopped working" | Windows -
In running the datalgr example, I get the error NIDAQ32.dll cannot start.... then program exits. Version of NI DAQ is 6.9.2, using MS C++.
Since this is a DAQ question more than a Measurement Studio for VC++ question, I'd recommend you repost it to the DAQ forum.
Cheers,
Azucena -
Cannot start using my CC programs
I paid for CC student membership on November, 29. Now, if I log in on the web and go to my profile page, it shows that I have annual account and next payment will be on December, 28. So everything seems to correct. However, when I download any program, run it and use my account to log in, it only offers me to start trial or to buy a CC membership. What can I do with it?
Really disappointed, paid for membership and cannot start using programs.Does that mean I have lost all my data?
Since you can't boot from the install disk to check the hard drive, that's impossible to say. If you have some hardware problem and the hard drive is unaffected, your data is fine, just inaccessible at the moment. Of course, if the hard drive is damaged and you have no backups, you may have lost some or all of your data.
Unfortunately, however, there is an authorized apple store (not a retial store) in my area that I have given them my MacBook before for repairs (and I was charged for it), but no Genius Bar has been listed in my nearby area. Is there any technical support avaiable by phone?
Tech support is available by phone, but I don't use it, so I'm unclear on the restrictions. IIRC, you are allowed one incident for free, but after that you have to pay for the support. The Genius Bar is always free, though, which is why I recommend it. Perhaps you should ask the folks at that repair shop if they could take a look at it and see if they can get it to boot. They'll have resources you don't, like external hard drives to boot from. -
Dear All Good day
i have Lync server 2010 and runing Good
yasterday some users cann't open Lync Client and give us this error Massege
microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows
registry . please uninstall and then reinstall lync.
but another users runing Good
i'm try to unistall lync Client and install again but same problem
and Try to Install New server lync 2010 but same problem
please help me for resolve this problem
Khaled Eldosuky
Senior System Engineer
[email protected]Hi All,
I was not able to uninstall the trial lync client, and re-install a new client? Any help will be appreciated?
All i see is the below message....
microsoft
lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows registry . please uninstall and then reinstall lync.
Regards,
Venkat -
I'm getting an error message of: "Cannot start Microsoft Office Outlook. A program error occurred. Quite Outlook and Microsoft Windows and then start again. A program error occurred. Quite Outlook and Microsoft Windows and then start again." when
I try to start Outlook 2007 running on windows 8.1. (standalone with pst file, not exchange)
I have tried:
Restarting computer (hard boot)
Running in safe mode: Outlook /safe
Resetting the nav panel: Outlook /resetnavpane
Running scanpst on the pst files.
Outlook /cleanprofile
Creating a new profile
Checking if windows search is running (it was) and restarting it.
All with the same error message.
I'm stumped. Any ideas how to get Outlook to open? Was there some sort of windows update that ran last night and messed up Outlook? It worked at end of day yesterday.
Thanks in advance.Thank you for the update, seems the problem has been resolved, right? If this issue comes back or you need further assistance on it, please feel free to contact us.
Cheers,
Steve Fan
TechNet Community Support -
Attempting to install the latest update, received = this program cannot start "MSVCR80.dll Missing". What should I do?
Click here and follow the instructions.
(98820) -
Cannot resolve elements 11 problems so must restart. Also must un start program. How to start?
Are these the tool option problems in your other discussion? If so what happened after Resetting the tools? If that didn't help, try selecting Edit> Preferences> General> Reset Preferences on Next Launch and restart PSE.
What do you mean by 'How to start'? Are you asking how to uninstall? If on Windows there will be an uninstaller in the Control Panel Add / Remove Programs section.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
AFTER HITTING START, PROGRAMS, ACCESSORIES, SYSTEM TOOLS, THERE IS NO DEFRAG BUTTON. THERE ARE OTHER PO==O NO DEFRAG BUTTON, WHERE ELSE COULD IT BE? WENT TO START, PROGRAMS, ACCESSORIES, SYSTEM TOOLS. THERE ARE OTHER OPTIONS BUT NONE HAVE TO DO WITH DEFRAGING. HELP!!!!!
== This happened ==
Every time Firefox opened
== i TRIED TO DEFRAG MY CMYeah, this is no place for Windows help...
But, press Windows key + R
then type in:
dfrg.msc
Press Enter.
Should open defrag utility for you =/
Maybe you are looking for
-
Getting QM parameter values for Raw Material on the basis of goods receipt
Hi All, I have requirement, while generating inspection lot these tables MCXD&MCXA should update. when we need a QM parameter value for the month, It should be the average of all the inspection lot generated for the month. Thanks in advance Regards
-
whenever i turn the camera video on it just freezes for a second during filming.. but if i chabge to store the video on phone memory it never freezes.. i can't shoot long videos bc i can't use the camera while saving what i get to the mass memory..
-
I just got my new white Macbook in today. I was very excited! I was using my camera and it was working fine and then I left my laptop closed for like 2 minutes. When I try to use it now the green light for the camera will light up, but it shows no pi
-
wjhat is the best and safest way to clean my iMac screen (fingerprints, etc,)
-
Product: HP Pavilion dv7-6015tx Entertainment Notebook PC I am running Windows 7 32-bit OS I have 4GB of RAM, 2.45GB useable. Extensive hardcore gaming leads to RAM being swallowed up. I have physical memory of 4096MB (1 x 4096 DDR3-SDRAM ) Would ge