Cannot start replication from HANA SUDIO...SLT ISSUE

Hi,
When trying to replicate/load tables from HANA studio nothing is happening.
I do not get any error messages but the table does not appear in the Data provisioning screen.
I checked RS_ORDER and it has no entries.
Somehow the SLT master job is not responding to the orders issues by HANA studio.
I am not able to understand what is happening here?
Can anyone help?
Regards,
Sidharth Mishra

In Development environment, you can insert a row manually to RS_ORDER and see whether table load/replication happens?
Just right click the the table RS_ORDER in your replication schema and choose "Generate - Insert Statement" and give relevant values. If you are not aware of what to fill in, you can refer to my blog "Only Delta Loading using SLT - Know How" for the same.
But do not do this in production environment.
Regards
Raj

Similar Messages

Maverick upgrade issue : OS X cannot start up from this disk

Hi all, everytime I try to upgrade to Maverick for my new mackbook air, I got this problem 'OS X cannot start up from this disk' (MACOSX). I tried deleting files to get more space, repairing disk and determine that it is not time machine issue, but to no avail. I have 58 gb free space on my 128 gb SSD. Can anyone help ? It is really frustrating. I am not sure what is the other disk called OS X install ESD which is 5.42 GB total.

sigge44 wrote:
I'm trying to upgrade my tiger installation with leopard, but I get the message "Mac os x cannot start up from this volume". It is the internal disk and I have a Linux install too on that disk. Earlier I used Refit but I have removed it. Do I have to repartition? Partiontabel is GUID-partiontable in diskutil.
Removing an app or bootloader like rEFIt or OS such as Linux does not ensure that the drive is back to where it was before you installed these programs.
Even having a partition for TechTools eDrive will cause problems.
First I would run DU and check/repair your HD and then run a file permission verify/repair and zap the PRAM.
I would then suggest backing up Tiger and Linux with clones and completely erasing the HD using the full (not quick) erase and then installing Leopard and migrating your Tiger material back.

Mac os x cannot start up from this disk

I have a 2008 MacBook Air which runs Leopard. I want to upgrade to Snow Leopard and then Lion. I have the Snow Leopard family pack disk and try to do the install but it say 'Mac OS X cannot start up from this disk' and shows a yellow triangle with a !
I went to the genius bar and they told me to put the Snow Leopard disk in the superdrive and restart holding down C and it would then work - but it did not. I also saw on a forum about using disk utility and partion and resizing the partition then putting it back as it was originally and then re trying but I get the same message.
Anybody got any ideas?

Saw an article by Topher Kessler: http://reviews.cnet.com/8301-13727_7-10330520-263.html
The extract from that article below worked for me.
Note when I first resized the partion (comment above) I did not 'apply', this time I did and then resized back to the original full size and hit 'apply' again. Although when the install starts it shows the size of the partion to be the smaller (temporary) size, it is not and the install completes with no issues.
Boot from the Snow Leopard DVD and select your language. Then launch "Disk Utility" from the "Utilities" menu and perform the following steps:
Select your boot device (the device above the boot volume name), and select the "Partition" tab.
Resize the partition by selecting the volume name in the rectangular volume representation and drag the bottom-right corner of it to change its size.
Click "Apply" to change the partition's size.
Revert the change by dragging the same resizing corner back to the bottom, and click "apply."
After this is done, quit out of Disk Utility and try installing Snow Leopard again. Since you are booted from the Snow Leopard DVD you should be able to continue immediately without having to reboot your system.
Hope this helps others. Thanks Topher!

I have updated to Itunes v11. Now I cannot start Itunes from my computer

I have updated to Itunes v11. Now I cannot start Itunes from my computer. I have tried clicking both on the short cut icon, the program file and the application file. The hour glass appears for a second then nothing. I have tried copying an audio disc and nothing happens.

Are you getting an error message number with your unknown error? If so, what's the error message number, please?

Can't Install Leopard "Cannot Start up from this volume"

I have 10.4.10 currently installed on my MacBook (120GB aftermarket HD).
HD works fine and is properly partition/formatted and working just fine in 10.4 (GUID partition, journaled, etc). Ran repair permission/disk to be safe and it checked out ok.
10.5 installer loads up ok but when I get the list of drives to install to my HD has a red exclaimation on it and when I try and select it I get the message "You cannot install Mac OS X on this volume. Mac OS X cannot start up from this volume."
I have no problems running 10.4 on that volume and I don't want to reformat unless I am 100% sure it will fix the problem.

Since nobody replied after 26 views I assumed nobody wanted to help me.
So I ended up reformatting my HD to the same options it currently had and that fixed it. SO I am starting to do the install now.
Thanks to the 26 people who viewed it and didn't offer any help.

Installing Leopard over Tiger: "MacOs X cannot start up from this [volume]"

That's the message I get on an iMac dual 2-GHz. Each partition has a yellow '!' with the message "MacOs X cannot start up from this [volume]" (I think it says volume) not 'cannot be installed on this..."
Trouble is, it says this about the current 10.4.11 start-up volume. Is this a GUID partition map thing? Any ways around it?
TIA,

TimDanaher wrote:
"MacOs X cannot start up from this [volume]" (I think it says volume) not 'cannot be installed on this..."
Trouble is, it says this about the current 10.4.11 start-up volume. Is this a GUID partition map thing?
That's easy to test. Launch Disk Utility, select that drive (not volume) in the column on the left, and look for "Partition Map Scheme" at the bottom of the window.
Any ways around it?
If it's not already GUID, you'll need to repartition the drive. That will erase everything on it.

"You Cannot Install OS X on This Disk. OS X cannot start up from this disk".

Hey, I am running Lion on a Macbook Air 2010 model and i recently bought Mountain Lion through the MAC App Store. ive had problems installing it as i cant install it onto my Macintosh HD (startup Disk). Ive opened the ML installer and its rebooted my mac into the installer Menu, but when it goes to install, it stops and says You Cannot Install OS X on This Disk. OS X cannot start up from this disk." i want to be able to install ML overwriting Lion on my MacintoshHD (startup drive), are there any solutions that can fix this problem?

Glad to hear it!
I ran into another problem: The USB cable I was using for my external backup disk was not reliable. I kept getting "disk ejects" at various points during migration.
I bought a new "2.0 certified" cable and it worked fine. The first two attempts resulted in re-installs.
I'm happy to report that after the 3rd re-install of ML everything appears to be OK.
I disabled TM and keeping my last b/u offline for a few more days to be safe....

Solution: mac os x cannot start up from this volume

I purchased a new WD 300GB SATA drive recently to replace a failing OEM 250GB drive in a G5 tower. I installed the new drive and ran the 10.4.3 Installer DVD. I opened Disk Utility, selected the new drive, clicked the Erase tab, etc., etc. Went back to the Installer, saw an error: "You cannot install OS X on this volume. Mac OS X cannot start up from this volume."
Long story short, it appears that sometimes Disk Utility doesn't actually correctly format the drive. The key thing to look for is that if you go to Disk Utility and select the physical drive volume, then hit Get Info, under Partition Type it will say "FDiskpartitionscheme," even though it claims to be formatted Mac OS Extended, Journaled. The Installer will reject any disks not listed as "Applepartitionscheme."
The solution is to go back into Disk Utility and try different methods of reformatting (select the physical drive, select the logical volume, Erase, Partition, etc.) until you get "Applepartitionscheme." Then it should work fine.

To install Panther, you need the retail install version CDs (black with silver X). I suspect you are trying to use a model specific version or upgrade version (gray), that won't work.
When you formatted the new drive, did you check to install the OS 9 drivers? The drivers need to be installed if you want to be able to boot OS 9.x. If you just want to be able to run in classic mode, the drivers are not necessary.
If OS X has never been installed on your Mac, you need to check if your Mac requires a firmware (Boot ROM version in System Profiler) update. Mac OS X: Available firmware updates
http://docs.info.apple.com/article.html?artnum=86117 If an update is required, the update must be installed (using OS 9) BEFORE you install OS X.
 Cheers, Tom

Upgrade "Mac os x cannot start up from this volume"

I'm trying to upgrade my tiger installation with leopard, but I get the message "Mac os x cannot start up from this volume". It is the internal disk and I have a Linux install too on that disk. Earlier I used Refit but I have removed it. Do I have to repartition? Partiontabel is GUID-partiontable in diskutil.

sigge44 wrote:
I'm trying to upgrade my tiger installation with leopard, but I get the message "Mac os x cannot start up from this volume". It is the internal disk and I have a Linux install too on that disk. Earlier I used Refit but I have removed it. Do I have to repartition? Partiontabel is GUID-partiontable in diskutil.
Removing an app or bootloader like rEFIt or OS such as Linux does not ensure that the drive is back to where it was before you installed these programs.
Even having a partition for TechTools eDrive will cause problems.
First I would run DU and check/repair your HD and then run a file permission verify/repair and zap the PRAM.
I would then suggest backing up Tiger and Linux with clones and completely erasing the HD using the full (not quick) erase and then installing Leopard and migrating your Tiger material back.

Cannot Start Execution from Work repository of ODI

I'm unable to start any execution with ODI agent from my work repository, getting the following error,
"oracle.odi.runtime.agent.invocation.InvocationException: ODI-1274: Agent Exception Caused by: Create DwgConnectConnection to work repository failed; nested exception is java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor"
The SID of the data base where my work repository lies has been changed. I have updated the new SID in topology with work repository connection JDBC and all the data servers pointing to the DB.I'm able to successfully test connections with agent and no agent. I'm able to connect with ODI studio to the work repository and regenrate my scenario's. Where as during execution with logical agent getting the above error. Why is the agent unable to recognise the change in SID made in topology? Any suggestions would help!!

I have not updated odiparams with the repository details. I have one master and almost 7 work repository repository associated to it. I have congigured only the master and one of the work repository in odiparams rest are not added.
But i haven't faced any issue due to this so far.

Cannot start scan from HP Office Jet Pro 8620 since upgrading to Windows 10

I updated to Windows 10 Home 64 bit. I can scan if it is started from the PC on the HP Printer Assistant.But cannot start a scan from the front panel on the 8620 printer,it times out and gives errors"The scan could not be completed due to one or more of the following issues-connection to the computer is lost-The scan application on the computer is currently in use- OCR application is not installed on the computerSee the computer monitor for details" Nothing is displayed on the computer monitor. How do I get scan to work on the printer without initiating it from the PC?

Hi, Please check that the Software is installed, you can download the software from this link: http://support.hp.com/us-en/drivers/selfservice/hp-officejet-pro-8620-e-all-in-one-printer-series/5367611/model/5367613#Z7_3054ICK0K8UDA0AQC11TA930C7 Once installed, can you start up your printer software and under Scan, there is a "Manage Scan to Computer" tab. Click on the "Manage Scan to Computer" tab and make sure it is enabled. Hope that helps! Please click the “Kudos Thumbs up” on the left if this has helped you and “Accept as solution” if this has helped solved your problem.

Cannot start up from OS 9 CD

Well as the title says, I am having problems starting up my imac with the original OS 9 CD's. I had successfully installed 10.3.9 the other day only to find I could not use classic. There were issues with the system folder.
I am prepared to start from scratch and tried to start up from the original CD's to reformat but could not. I have now reformatted from the OS X as I thought it may be the OS X stopping me starting up from the OS 9 and but still nothing. The computer reads it OK but will not restart from it either pressing C, going through system prefs nor pressing the option key.
Can anyone help please?

You may need to upgrade your Mac OS 9, that is install in the same partition as you Mac OS X system, to Mac OS 9.2.2. See:
http://docs.info.apple.com/article.html?artnum=75288
If you want to destroy all information on the drive, I'd re-partition the drive in OS X. I advise formatting in Mac OS classic. The classic formatter is call drive setup. It is in the utilities folder.
I'd do not know why you cannot boot.
Assuming the correct cd is in the machine. Be sure to power off your mac. What 15 seconds. Hold down the c key. Power on your mac.
Be sure to power off your mac. What 15 seconds. Hold down the option key. Power on your mac. Place cd in machine. Power off your mac. What 15 seconds. Hold down the option key. Click on the cd image. Click on the right arrow key.
Robert

Not able to start HLM from HANA studio

Hi Experts
I have installed SAP HANA SP07 version with patch level 4 on one of the node of a 4 node server.
4 nodes   A B C D
on node A i have installed AP HANA SP07 version with patch level 4    and everyting is working fine form HANA Studio 8.2
on node B i have installed AP HANA SP07 version with patch level 4    HLM is not working with HANA Studio 8.2 and at oslevel to.
i did update to latest HLM version ie., sp7 patch12.
but still the same error.
welcome any suggestions.
Thanks
Kishore

Hi Sadanand
Thanks for your update.
I did start the HLM as following
#cd /hana/shared/<SID>/HLM
# ./bootstrap-hlm.sh
i got the following prompt
<hostname>:/hana/shared/<SID>/HLM> ./bootstrap-hlm.sh
There is bootstrapped HLM
Checking for running HLM...
There is no running HLM.
Configure /usr/sap/hlm_bootstraps/<SID>/HLM/hlm.sh
osgi>
and now i can seel HLM process running at os level.
but still not able to launch HLM from HANA studio and the following URL is not working
1) via browser: http://<host>:1129/lmsl/HLM/<SID>/ui/?sid=<SID>
This webpage is not available
Thanks
Kishore

Cannot Start Prepare from Upgrade Assistant GUI

Guys,
We have completed test,DEV upgrade using Upgrade assistant GUI but now during Production upgrade we cannot start Prepare using GUI but we can run from SCROLL Mode.
I am able to open assistant GUI and enter username and password then next screen comes up. Then when I try to open Administration --> Start Prepare it does nothing even connect to SAPup does nothing. Then I need cancel GUI using task manager.
Please help Urgent
Thanks
Santosh

Hi ,
1.Once you run /<DVD mount directory>/PREPARE , choose method EXIT (default value)
2.Start the UA server ( use nohup to run UA server in background to avoid the uncessary termination , for example, network errors etc., )
3. a) Starting with browser ,
http://<host name>:4239 ( use full qualified hostname)
b) copy the uagui.jar file from directory
<upgrade directory>/ua on this host to any local directory.(local system - windows) and run
java -cp <UaGuiDir>\uagui.jar UaGui
4.If system is Unix , try
java -cp <upgrade directory>/ua/uagui.jar UaGui

Cannot start Services from CMC after the migration of BOBJ from C to E driv

Hi ,
We recently upgraded our BOBJ environment from BOE XI 3.1 FP1.6 on C drive to BOE XI 3.1 FP2.2 to E drive. The installation is completed successfully but all the services from CMC are stopped. I cannot start them and upon checking the properties, the path is still pointing to C drive even though the tomcat settings are pointing to E drive. Any help on this is greatly appreciated.
The error message is as follows:
The executable could not be launched. Possible reasons are insufficient RAM or disk space, or an invalid filepath or working directory. Actual reason: CreateProcess: "C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\wireportserver.exe" -JTCss 1024 -loggingPath E:/Logging/ -trace -fg -restart -name BUSOBJJF00.WebIntelligenceProcessingServer -pidfile "E:\Program Files\BusinessObjects Enterprise 12.0\serverpids\BUSOBJJF00_BUSOBJJF00.WebIntelligenceProcessingServer.pid" -ns BUSOBJ-JF00.ESC.win.colpal.com:6400 error=3
Thanks,
madhuri

I saw something similiar once when using SAP authentication(you didn't mention which auth model you are using).
If the license you installed was a named user (vs. concurrent user) and you picked the opposite setting in the CMC Authentication section, then you won't be able to login.

Cannot start replication from HANA SUDIO...SLT ISSUE

Similar Messages

Maybe you are looking for