Cannot start SAP using commond startsap on unix
Hi
I am facing issue while starting SAP , when i run Startsap command on Unix i am receiving following error.
saposcol already running
Running /usr/sap/CID/SYS/exe/run/startdb
Trying to start CID database ...
Log file: /home/cidadm/startdb.log
No SQL*Net V2 connect to CID available.
Check that the listener is running: "lsnrctl status".
Start the listener as user oracid: "lsnrctl start".
/usr/sap/CID/SYS/exe/run/startdb: Terminating with error code 14
I have started listener lsnrctl by becoming system admin and lsnrctl is started still i am gettig above error
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.2.0 - Production
Start Date 30-JUN-2010 07:51:50
Uptime 0 days 1 hr. 1 min. 30 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/CID/102_64/network/admin/listener.ora
Listener Log File /oracle/CID/102_64/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nsu1u660)(PORT=1521)))
The listener supports no services
The command completed successfully
Please let is know what is the issue.
Thanks
Uttam Borsare
> Thanks for ur reply but the sap application and database was running fine till few days back and no setting has been changed any
> where.
Without looking at the system it's impossible to give a reason. Make sure you start the listener with ora<SID>. If that doesn't help open an OSS call (BC-DB-ORA) and let the support have a look on the system.
Markus
Similar Messages
-
hi guys
start sap using run
in c: type startsapr3 and follow the syntaxHello
1 - Start CMD.exe
2- Goto directory of Kernel
3- sapstart.exe name=<SID> nr=<SYS_NUMBER> sapdiahost=<hostanme>
Cheers,
Levi Shaked -
Cannot start SAP B1 DI Proxy Service
Hi,
After i restart my machine, my SAP B1 DI Proxy Service cannot start.
Even i go to services.msc to start this DI Proxy Service manually, a message appear as per below :
" The SAP Business One DI Proxy Service service on local Computer started and then stopped.
Some services stop automatically if they are not in use by other services or programs"
Please advice how to start this DI Proxy Service ?
Thanks a lot.
Regards
SamYou do not have to re-install everything. It's enough to run the integration package from your installation media and it will perform an repair.
You might need to re-activate the mobile package if you are using that one after the repair is finished.
Br
Anders -
Cannot start SAP XI - Integration Respository and Directory
Dear Expert,
Some of developers cannot start Integration repository and directory at his/her client. It still running after logon with "PISUPER" user.
Do I missing some necessary applications on the clients?
Please advise.
Thank and regards,Thanks for your answer, Alexander Bruch,
I think the host name is no problem because the Integration Builder page can be started with URL "http://iwdfvm2160:51000/rep/start/index.jsp" and also prompt me the logon window. But after input the user/password, normally is PISUPER, the logon window is running for a long time, nothing happen.
We also using user PISUPER and it's fine with another laptop.
Regards,
Kobsak -
Cannot start SAP add-on copy express
Dear All,
I requested a global license for our customer. The manager SAP user has Pro license. When I tried to start copy express in either CA or US localization DB, I got an error message 'Add on does not have a license'.
I tried on another customer's server. The manager SAP user has Pro license only but I can start the add-on.
The customer is on SAP8.8 PL12, SQL2005. Any idea? Thanks.
Regards,
YukaGordon,
We don't have that choice 'SAP Add-ons' or 'Add-on Access'. When I requested the license, AddOn Access Users I requested 90 (the number I can request). When I go license administration, on components tab, I can see I have 9999 SAP add-ons. But I cannot see it on allocation tab.
On my other customers, I cannot see 'SAP Add-ons' or 'Add-on Access' either. I just allocated Pro license and it works fine.
Thanks.
Regards,
Yuka -
I have an NW4 test drive running on linux/db2. It used to run well, and I don't remember changing anything.
However, I can no longer start SAP. The database is running , and I can connect using the CLP "db2" as sapsi4 and si4adm, and select from SAP tables.
However, running the <b>usr/sap/SI4/SYS/exe/run/startdb</b> script, specifically the line <b> R3trans -d -w xx.log</b> produces an error indicating a bad password.
Does anyone have an idea of how to fix this, and what I could have done to cause the problem? Below is the output. Sorry if it isn't very readable.
4 ETW000 R3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 22.08.2005 - 08:00:58
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d -w xx.log
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Aug 22 08:00:58 2005 175 0.000175
4 ETW000 [dev trc ,00000] db_con_init called 32 0.000207
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 62 0.000269
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' ...
4 ETW000 58 0.000327
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/SI4/SYS/exe/run/dbdb6slib.so), hdl 0
4 ETW000 27893 0.028220
4 ETW000 [dev trc ,00000] Library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' loaded
4 ETW000 46 0.028266
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 62 0.028328
4 ETW000 [dev trc ,00000] Version of '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' is "640.00", patchlevel (0.7)
4 ETW000 141 0.028469
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 41 0.028510
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 42 0.028552
4 ETW000 [dev trc ,00000] New connection 0 created 35 0.028587
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 46 0.028633
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.028664
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 38 0.028702
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.028741
4 ETW000 [dev trc ,00000] RLIMIT_STACK: current=-1, max=-1 337 0.029078
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) database interface 640.00 [opt] 35 0.029113
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 27 0.029140
4 ETW000 [dev trc ,00000] (0.6) DB6: Schema setting for remote monitoring (note 711477)
4 ETW000 37 0.029177
4 ETW000 [dev trc ,00000] (0.7) DB6: support DB6_DB_TYPE=DB2/400 (note 663756)
4 ETW000 35 0.029212
4 ETW000 [dev trc ,00000] (0.7) DB6: CTE on UNICODE (note 717357) 23 0.029235
4 ETW000 [dev trc ,00000] Supported features: 23 0.029258
4 ETW000 [dev trc ,00000] - smart optlevel handling (non-UR, FAE) 23 0.029281
4 ETW000 [dev trc ,00000] - SQLExtendedBind for LOBs and Unicode (V8 or higher)
4 ETW000 35 0.029316
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 83 0.029399
4 ETW000 [dev trc ,00000] ..done 136 0.029535
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (BEGIN) 255654 0.285189
4 ETW000 [dev trc ,00000] &+*** DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N Attempt to establish connection failed with security re
4 ETW000 95 0.285284
4 ETW000 [dev trc ,00000] &+*** ason "24" ("USERNAME AND/OR PASSWORD INVALID"). SQLSTATE=08001
4 ETW000 40 0.285324
4 ETW000 [dev trc ,00000] &+***
4 ETW000 38 0.285362
4 ETW000 [dev trc ,00000] &+***
4 ETW000 39 0.285401
4 ETW000 [dev trc ,00000] &+*** ABAP location info '', 0
4 ETW000 52 0.285453
4 ETW000 [dev trc ,00000] &+***
4 ETW000 37 0.285490
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (END) 24 0.285514
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'SI4' as 'sapsi4' failed
4 ETW000 133 0.285647
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'SI4'"Hi,
The following might be the issues:
1.New Password restrictions have come up at your office.
2.Somebody changed the pwd`s.
3.License might have expired.
Try re-starting the server.
Please reply.
Rgs
vikas -
After restart system, cannot start sap (and connect via GUI)
We have installed Solution Manager 7.1 on linux64.
After the accident, and reboot the system , stops producing startsap. On the advice of specialists took over running the "startsap <virtualhost>"
At the command prompt , startsap_DVEBMGS00.log startsap.trc and indicated that the launch was successful .
However, neither in the list of processes to be seen dispatcher, or SAP GUI can not connect to the system.
In addition, there is an assumption that just does not start JAVA Instance.
In this regard, there are a number of questions for the esteemed colleagues :
1. on how the logs directory from which you can learn this starts the ABAP and JAVA stacks ?
2 . As can be verified directly from the server ( what commands ) kaktivnost / no system activity ?
3 . Which log files do I need to provide here , you so that you could possibly help me?Hi Michael,
You need to check the below things
1. Run R3trans -d to check whether sap can connect to DB or not.(it will create the trans.log file)
If return code is 0012 , then
There is some problem with Database
Else return code 0000
There is some problem with SAP.
2. Now go to the directory /usr/sap/<SID>/DVEBMGS<XX>/work
and check the log files
1. dev_w0
2. dev_disp
3. dev_ms
4. stderr<x> logs which alos content important system
Above logs are for ABAP system analysis.
For Java
3. std_server<x>.out
4. dev_server<x>
5. dev_dispatcher
Also check the default tarce and application log as well for java
With Regards
Ashutosh Chaturvedi -
[SOLVED]Cannot start postgresql using systemctl
I am thinking about switching entirely to systemd. So I have been playing around to learn systemd way of starting services.
[root@myhost sudeep]# systemctl start postgresql.service
Job failed. See system journal and 'systemctl status' for details.
[root@myhost sudeep]# systemctl status postgresql.service
postgresql.service - PostgreSQL database server
Loaded: loaded (/usr/lib/systemd/system/postgresql.service; disabled)
Active: failed (Result: exit-code) since Mon, 04 Jun 2012 19:14:44 +0530; 11s ago
Process: 1473 ExecStartPre=/usr/lib/systemd/scripts/postgresql-initdb (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/postgresql.service
Jun 04 19:14:44 myhost postgres[1473]: Creating symlink /var/lib/postgres ->
I also tried
[root@myhost sudeep]# initdb -D /var/lib/postgres/data
initdb: cannot be run as root
Please log in (using, e.g., "su") as the (unprivileged) user that will
own the server process.
And obviously I cannot run systemctl as a normal user. What is the problem?
Last edited by TwiNight (2012-06-06 04:52:30)deltaecho wrote:
Try editing /etc/conf.d/postgresql, and uncomment the line for PGROOT="/var/lib/postgres" (although it is listed as having a default value, doing this resolved the issue for me).
EDIT: I found that config by looking in the postgesql.service file, which set the option ExecStartPre=/usr/lib/systemd/scripts/postgresql-initdb. Looking in the corresponding file, I noticed that it made several references to $PGROOT, and since the statement "Creating symlink /var/lib/postgres -> $PGROOT" returned the empty string for $PGROOT, I figured that it was not correctly set. At the top of that script, you will notice where it imports the postgres config: ". /etc/conf.d/postgresql". Within that file is where the postgres options are set.
I tried this. Still I am getting error as follows:
[root@myhost sudeep]# systemctl start postgresql.service
[root@myhost sudeep]# systemctl status postgresql.service
postgresql.service - PostgreSQL database server
Loaded: loaded (/usr/lib/systemd/system/postgresql.service; disabled)
Active: failed (Result: exit-code) since Wed, 06 Jun 2012 14:13:24 +0530; 8s ago
Process: 1668 ExecStop=/bin/su - postgres -m -c /usr/bin/pg_ctl -s -D /var/lib/postgres/data stop -m fast (code=exited, status=1/FAILURE)
Process: 1661 ExecStart=/bin/su - postgres -m -c /usr/bin/pg_ctl -s -D /var/lib/postgres/data start (code=exited, status=0/SUCCESS)
Process: 1658 ExecStartPre=/usr/lib/systemd/scripts/postgresql-initdb (code=exited, status=0/SUCCESS)
Main PID: 1666 (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/postgresql.service
Jun 06 14:13:22 myhost su[1661]: pam_unix(su:session): session opened for user postgres by (uid=0)
Jun 06 14:13:24 myhost su[1668]: pam_unix(su:session): session opened for user postgres by (uid=0)
Jun 06 14:13:24 myhost postgres[1668]: pg_ctl: PID file "/var/lib/postgres/data/postmaster.pid" does not exist -
I have tried going past the first set up stage, still with no wifi. I have then tried restoring the ipad mini, still no wifi available. Both my ipone and Apple Mac have wifi full bars. Please help. I only picked up my new ipad today. I am thinking it may be faulty.
LeleIt may be faulty but you should try to activate it first in order to be sure.
Why don't you activate it using iTunes on the Mac and then troubleshoot the WiFi connection. Connect the Mini to the Mac with the cable and iTunes should startup and take you through activation. If you do not autosync and iTunes des not start up on it's own, then launch it yourself. -
See original question. Firefox apparently doesn't close when using the x in upper right corner as when I try to start it again I get a message that FF is already running and I must close it first. I thought the x would do that. Is something set wrong or corrupted?
ThanksSee "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]] -
Possible ways to start SAP Web AS services
I am using J2EE SAP Web AS 7.0 on UNIX platform and herein i use startsap script to start SAP as well as database services. My concern here is that what all are the possible ways to start the SAP services apart from the above mentioned script? One i could figure out is to run all the commands in the script one by one, though does not make sense if the script is already available
Reason for asking above question is that i want to set an environment variable whenever SAP Engine starts up. And, if i embed this line in startsap script it would solve my purpose but if there is any other way also to start SAP services, then i have to cover those use cases also. So, please provide your suggestions for my requirement.
ThanksThanks for your input and it looks like adding an environment variable in startsap script is not a good option.
My requirement is that my SDA file has dependecy on some third party dll's and at the time of starting SAP Web AS, this dll path should be available at the beginning of LIBPATH variable. So, please let me know if some fix is available for my requirement.
Also, i have discoverd that SAP profile (located at /usr/sap/<SID>/profile/START_JC<SID>_<machine name>) has the required parameters( LIBPATH, etc) and if i add my dll path in these environment variables, i am able to load my dll at the SAP starting time. Here my questions are:
1. Is it fine to make changes in this profile file?
2. Would my changes be overwritten if the kernel upgrade happens?
3. If i start SAP using MMC (suggested by you), still this profile file be read for starting SAP Web AS and the dll's would be loaded?
Apart from this i tried out using "There is a java version as well, which can be started from a browser:
http://<hostname>:5<instance number>13" which internally uses MC. Here if i try starting SAP WebAS, it prompts for user name and password. I tried out <SID>adm user, J2EE Administrator user and machine root user but all these options were ruled out by the Authentication module. Can you please suggest which user name should i try to stop/start SAP using MMC?
Thanks -
Cannot Start SI4 After New License
I have a test drive version of NW 4 running on Suse 9.2 Linux and db2. It ran fine for 3 months. Yesterday I installed a new license because the old one expired. I installed it as root while the db was running.
This morning, I cannot start sap, because the database won't start.
The following is the output of R3trans. Can anyone give me any suggestions on things to try to resolve it?
4 ETW000 R3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 30.10.2005 - 07:08:07
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d -w xx.log
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Oct 30 07:08:07 2005 148 0.000148
4 ETW000 [dev trc ,00000] db_con_init called 27 0.000175
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 59 0.000234
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' ...
4 ETW000 57 0.000291
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/SI4/SYS/exe/run/dbdb6slib.so), hdl 0
4 ETW000 21464 0.021755
4 ETW000 [dev trc ,00000] Library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' loaded
4 ETW000 59 0.021814
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 59 0.021873
4 ETW000 [dev trc ,00000] Version of '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' is "640.00", patchlevel (0.7)
4 ETW000 137 0.022010
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 40 0.022050
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
4 ETW000 40 0.022090
4 ETW000 [dev trc ,00000] New connection 0 created 35 0.022125
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 45 0.022170
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 31 0.022201
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 37 0.022238
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.022277
4 ETW000 [dev trc ,00000] RLIMIT_STACK: current=-1, max=-1 296 0.022573
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) database interface 640.00 [opt] 31 0.022604
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 27 0.022631
4 ETW000 [dev trc ,00000] (0.6) DB6: Schema setting for remote monitoring (note 711477)
4 ETW000 36 0.022667
4 ETW000 [dev trc ,00000] (0.7) DB6: support DB6_DB_TYPE=DB2/400 (note 663756)
4 ETW000 35 0.022702
4 ETW000 [dev trc ,00000] (0.7) DB6: CTE on UNICODE (note 717357) 23 0.022725
4 ETW000 [dev trc ,00000] Supported features: 22 0.022747
4 ETW000 [dev trc ,00000] - smart optlevel handling (non-UR, FAE) 32 0.022779
4 ETW000 [dev trc ,00000] - SQLExtendedBind for LOBs and Unicode (V8 or higher)
4 ETW000 38 0.022817
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 87 0.022904
4 ETW000 [dev trc ,00000] ..done 136 0.023040
4 ETW000 [dev trc ,00000] Sun Oct 30 07:08:08 2005 97739 0.120779
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (BEGIN) 67 0.120846
4 ETW000 [dev trc ,00000] &+*** DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1032N No start database manager command was issued. SQLSTATE=
4 ETW000 46 0.120892
4 ETW000 [dev trc ,00000] &+*** 57019
4 ETW000 37 0.120929
4 ETW000 [dev trc ,00000] &+***
4 ETW000 36 0.120965
4 ETW000 [dev trc ,00000] &+***
4 ETW000 37 0.121002
4 ETW000 [dev trc ,00000] &+*** ABAP location info '', 0
4 ETW000 49 0.121051
4 ETW000 [dev trc ,00000] &+***
4 ETW000 35 0.121086
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1497] (END) 23 0.121109
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'SI4' as 'sapsi4' failed
4 ETW000 138 0.121247
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'SI4'"
si4host:si4adm 77>
si4host:si4adm 77> db2admin start
db2admin: Command not found.
si4host:si4adm 78> db2admin
db2admin: Command not found.
si4host:si4adm 79> db2start
10/30/2005 07:36:36 0 0 SQL8000N DB2START processing failed; a valid product license was not found.
SQL1032N No start database manager command was issued. SQLSTATE=57019Yes, startsap is the base script, which calls other scripts, R3trans and db2start.
I didn't have any luck. I did find an indication on an IBM website that the error message related to the fact that the db2 license had expired. There is a command called "db2licm" which you can run to update the db2 license, but I couldn't find a license file.
I wonder if IBM imposes it's own license expiration separate from SAP's, and that IBM require a re-install. So, I gave up and just re-installed it. Oh well, re-installing is good practice.
Sorry I couldn't help you. -
I have problem about starting SAP system. I executed stopsap command. After that I rebooted the HPUX system. And I try to execute startsap command.System gives me
message below.
brckxits:bxdadm 22> startsap
Checking ORC Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
17:27:59 11.04.2007 LOG: Effective User Id is root
This is Saposcol Version COLL 20.90 700 - v2.05 for HP-UX - 28.7.2006
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 2240) is already running .....
saposcol already running
ABAP Database ORC must be started on remote server
brckxits:bxdadm 23>Hi,
I get a following message when i try to start SAP using STARTSAP.
maltr35:sbdadm 16> startsap
Checking SBD Database
ABAP Database is not available via R3trans
Checking SBD Database
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 640 - AIX v10.35 5L-64 bit 070216
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 4448328) is already running .....
saposcol already running
Running /usr/sap/SBD/SYS/exe/run/startdb
Trying to start SBD database ...
Log file: /home/sbdadm/startdb.log
/usr/sap/SBD/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
The STARTDB.LOG states that the DATABASE is already OPEN with error code 0012.
<b>I tried to start the oracle manually and tried starting sap using startsap R3. then it gives me the following error. </b>
maltr35:sbdadm 15> startsap R3
Checking SBD Database
ABAP Database is not available via R3trans
Checking SBD Database
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.94 640 - AIX v10.35 5L-64 bit 070216
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
The OS Collector (PID 4448328) is already running .....
saposcol already running
Database SBD must be started first
ALSO STARTED THE LISTERNER AND STARTED THE DATABASE AND TRIED STARTING SAP STILL IT FAILS WITH THE FIRST ERROR MESSAGE MENTIONED ABOVE, KINDLY LET ME KNOW WHAT SHOULD BE DONE. -
Cannot Start Prepare from Upgrade Assistant GUI
Guys,
We have completed test,DEV upgrade using Upgrade assistant GUI but now during Production upgrade we cannot start Prepare using GUI but we can run from SCROLL Mode.
I am able to open assistant GUI and enter username and password then next screen comes up. Then when I try to open Administration --> Start Prepare it does nothing even connect to SAPup does nothing. Then I need cancel GUI using task manager.
Please help Urgent
Thanks
SantoshHi ,
1.Once you run /<DVD mount directory>/PREPARE , choose method EXIT (default value)
2.Start the UA server ( use nohup to run UA server in background to avoid the uncessary termination , for example, network errors etc., )
3. a) Starting with browser ,
http://<host name>:4239 ( use full qualified hostname)
b) copy the uagui.jar file from directory
<upgrade directory>/ua on this host to any local directory.(local system - windows) and run
java -cp <UaGuiDir>\uagui.jar UaGui
4.If system is Unix , try
java -cp <upgrade directory>/ua/uagui.jar UaGui -
I have LR 4 and now I cannot open the software because I get this warning: "light room cannot start because it cannot create files in the temp file location. C:\windows\temp\". I think I need to have LR open in a different place but I have no idea how to do that. Any help is most appreciated.
AlexJim
Thank you for your prompt reply. Unfortunately I am not that tech oriented and
cannot easily find that folder. I did notice when I was booting up the LR software
that I could accept the site where LR usually is set up or choose a place. I am
thinking that the standard location for LR software is corrupted and that if I
chose a different place it would work. I say this because whether I use my
original disc or download from adobe I get the same warning. I have 100GB of
memory on the hard drive and I have cleaned the computer with Mcaffee and free
software. What should I do next? I can't use this software and I doubt LR 5
would open up with my current problem.
Alex
Maybe you are looking for
-
I just did a fresh install on my computer, and whenever I open firefox and leave it there for a while it would stop loading any web pages. When I close it and reopen FF it tells me that FF is still running and I have to use task manager to end proces
-
CmcApp don't work after deployment on SAP Netweaver 7.0
Hello, I've installed BOE XI3.1sp3 and after installation deployed Web Components to SAP Netweaver 7.0Ehp1. After deployment, I've try to launch CMC application in web browser. The url is http://<j2ee_server>:<j2ee_port>/CmcApp. Logon screen looks go
-
How to optimize xquery expression ?
hi, i got berkeley db xml database with containers: dicom.dbxml and instancemetadata.dbxml. dicom.dbxml contains documents as follow: <?xml version="1.0" encoding="UTF-8"?> <instance docid="dicom_1009"> <dicom_item> <dicom_header>
-
1099 CHANGES FOR YEAR 2010 patch
Hi all, Anyone knows patch number for 1099 changes for passed year (2010). I am on Oracle 11i on Linux. Thanks, Eugene
-
How to reduce the capital of loan contract with FM
Hello Expert, i may use the 'FNVW' to reduce the capital of loan contract, but now i wanna realize this using FM who konw if it is available in banking loan system. your answer will be appreciated Kevin