Cannot start services in Mewdia Center (errors 0x80070005 and 70006)

I have an HP Touchsmart IQ506 desktop with integral TV tuner.
I recently did a system recovery (not restore) to Vista and upgraded to Win7 with my disc, then to SP1.
The computer searched for the tuner, but no luck.
I looked to the services, and they were not started, so when I tried to start the ehRecvr and ehSched, I got error messages as above -- Access denied.
I have been able to start and stop the MMCSS and WMP Network services with no problem.
The TV was working fine prior to the recovery, and nothing has been added to, or removed from, the system other than USB thumb drives.
I have not installed all updates since the recovery, so are there any which might result in this error message?
I had not installed all of the updates prior to the recovery, either.
How can I gain access to start the services?
I am the only one who uses the computer, and there are no kids in the house, so that possibility is out.
Suggestions?

Your TV Turner need different driver after you update OS
I just can find this
http://www.radarsync.com/drivers/id179187/AVerMedia_A327_Mini-Card_Hybrid_Analog%2fATSC
I found that based on your TV turner spec
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01481523&tmp_task=prodinfoCategory&cc=in&dlc=en&lc=en&product=3752245#N1796
I suggest follow up with HP to find the correct driver or software
good luck

Similar Messages

Error 244: The DataFinder cannot start due to an internal error.

I have LabVIEW 2010 and, during Windows start-up, this error message pops up:
"The DataFinder cannot start due to an internal error.
(244): Please wait till the National Instruments PSP Service is running and try starting the DataFinder again or reboot your computer."
I have had this error message pop up for the past year so it is a recurring thing. It started showing up a few months after I had installed the LabVIEW program onto my computer, so I am not sure on what caused this message to consistently pop up. I find that it also causes a delay in the starting up of my computer--my other start-up applications will begin to show only when I close the error window. Please help! Thank you.
Solved!
Go to Solution.

Hi xcontradictorx,
It sounds like the National Instruments PSP Server Locator might not be started. Could you go to Control Panel >> Administrator Tools >> Services and locate the National Instruments PSP Server Locator? Double-click on it and make sure that the service is started. If it is, stop it and start it again (just by hitting the stop and start buttons). If it is not, start it, then go to the Recovery Tab and choose Restart the Service as the action for First, Second, and Subsequent failures.
If after change the settings for the PSP service the issue continues I would think that for some reason the PSP service is just being started late for some reason. Could you do a test real quick: disable the DataFinder in msconfig, reboot, then run the DataFinder.exe from C:\Program Files\National Instruments\Shared\DataFinderDesktop\bin. This should place the MyDataFinder app in your system tray (it looks like a yellow gear).
If this is successful, then we will need to change the order of startup services such that the DataFinder just starts after the PSP service.
Try the following:
1) Locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
2) Delete the DataFinder entry
3) Add a shortcut of DataFinder.exe to C:\Documents and Settings\All Users\Start Menu\Programs\Startup
4) Reboot
This should do all the standard Windows Startup (like starting services, etc.) and then launch the DataFinder.
One question: do you use the DataFinder at all? Either with DIAdem or the Data Finder toolkit? If not, you could try removing it from the Startup items. Just go to Start >> Run... and type "msconfig". Choose the Startup tab, locate DataFinder, and deselect it. Click apply. This will probably get rid of the error message.
Patrick H | National Instruments | Software Engineer

Error: The DataFinder cannot start due to an internal error

Hello,
I get the same error message every time I reboot my Win 7 PC:
"National Instruments DataFinder"
"The DataFinder cannot start due to an internal error."
"Please wait till the National Instruments DataFinder Index Service is running and try starting the DataFinder again, or reboot your computer. "
I tried finding a DataFinder Index Service in the Control Panel --> Admin,istrative Tools --> Services, as mentioned in this post http://forums.ni.com/t5/LabVIEW/Error-244-The-DataFinder-cannot-start-due-to-an-internal-error/td-p/...,
but there was none such listed service:
I cannot find any mention of a DataFinder or a DataFinder Index Service anywhere else on my PC. Can you please help to find out where this error is coming from and how to fix it? As far as I am aware, I do not use this DataFinder. Thanks!
Regards,
Brandon

Hello BrandonVonk,
The toolkit wouldn't show up in your installed programs list as it is more like a plugin to LabVIEW. Instead, pull up NI License Manager and go to Local Licenses > LabVIEW XXXX > Toolkits and see if it is listed amongst the toolkits you have installed. There should be a geen box next to it to indicate that it has been installed and activated.
Hope this helps,
Siana A.
Application Engineering
National Instruments

Im updating itunes and cannot start services

I just installed (tried to) the latest version of itunes and i recieved an error message that said to try to reinstall. I did and now I am being told that I cannot start services and to make sure that I am an authorized user. What to do??

See Troubleshooting issues with iTunes for Windows updates.
tt2

I cannot start my mac book. Apple logo and spinning wheel on gray screen. Tried pressing shift key on start up nothing happen. Tried shift command V screen is still stuck

I cannot start my mac book. Apple logo and spinning wheel on gray screen. Tried pressing shift key on start up nothing happen. Tried shift+command+V screen is still stuck

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
=======================================
Reinstall - Mavericks, Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless.

I can't upgrade my iPhone 4 to iOS 5.1.1 from the iPhone using wifi!! the installation start but before finishing an error occurred and the installation stop! help

I can't upgrade my iPhone 4 to iOS 5.1.1 from the iPhone using wifi!! the installation start but before finishing an error occurred and the installation stop! help

I will try, and what happen is that after it is intall and start "Preparing upgrade" the installation stop and a message occure: An error occure download the iOS 5.1.1" thas all.
But now it is too late because the iOS 6 is now availabel, is it recommendet to donwload iOS 6 on iPhone 4 or not?

Cannot start Services from CMC after the migration of BOBJ from C to E driv

Hi ,
We recently upgraded our BOBJ environment from BOE XI 3.1 FP1.6 on C drive to BOE XI 3.1 FP2.2 to E drive. The installation is completed successfully but all the services from CMC are stopped. I cannot start them and upon checking the properties, the path is still pointing to C drive even though the tomcat settings are pointing to E drive. Any help on this is greatly appreciated.
The error message is as follows:
The executable could not be launched. Possible reasons are insufficient RAM or disk space, or an invalid filepath or working directory. Actual reason: CreateProcess: "C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\wireportserver.exe" -JTCss 1024 -loggingPath E:/Logging/ -trace -fg -restart -name BUSOBJJF00.WebIntelligenceProcessingServer -pidfile "E:\Program Files\BusinessObjects Enterprise 12.0\serverpids\BUSOBJJF00_BUSOBJJF00.WebIntelligenceProcessingServer.pid" -ns BUSOBJ-JF00.ESC.win.colpal.com:6400 error=3
Thanks,
madhuri

I saw something similiar once when using SAP authentication(you didn't mention which auth model you are using).
If the license you installed was a named user (vs. concurrent user) and you picked the opposite setting in the CMC Authentication section, then you won't be able to login.

"Device Cannot Start - Code 10" - Windows Vista Error, w/ 2nd Gen. Nano

I'm having trouble with my Nano and Windows Vista. The computer is recognizing the iPod just fine and seeing all of my songs, but nothing will play and the diamond bar does not move. I can't hear previews online either.
Under device manager, a yellow "!" shows up for the iPod, and it says "Device Cannot Start - Code 10" when I check. All of my drivers and updates are current as of today. So is iTunes. Any thoughts?
It worked before, but now it's not.

This is a reasonably common error on a PC when there is a problem with either a USB device, your USB cables or hardware, or the system drivers.
In a case where, as you say, the device works properly with other computers, the problem is more likely to be with the hardware or drivers on the computer you're trying to connect to.
See this site for some hints:
http://www.pchell.com/hardware/usbcode10.shtml
I found it via a web search; I don't have any connection to that site.
The good news is that your iPhone is probably fine.

Navigation Cannot Start from this location. ERROR ...

Navigation used to work fine on my X6, but since having to do a hard reset of the phone (due to other problems!) I cannot use the Navigation.
Everytime I get the error 'navigation cannot start at this location' and it doesn't seem like the phone can ever pick up my location.
I have tried un-installing and re-installing the application but to no-avail!
I haven't even wasted my time calling Nokia Support, as they are totally useless!
Does anyone have any ideas on how to fix this please?
I am gutted, my phone used to be amazing, now it seems as soon as I resolve one issue, there becomes another!!

After a huge update of my maps 3.06 using wifi direct to my N8 anytime I tried using destination on my phone only to get an error message "car navigation cannot start from this location". It didn't matter where I wanted to go to I got the same message. I use navigation more than any other app on my phone even phoning and texting and this is why I stay with Nokia so to loose my navigation would be a diaster. I googled the problem and found some tips to delete "cities" and any map files I could find but to no avail. I did a hard reset but stillI couldn't navigate and in OVI Store Installed Apps I could see Ovi maps and navigation 3.6 and also 3.08. I googled how to delete Ovi Suite Installed apps and got the tip to install Nokia Suite 7.1 which I did and deleted every file with map in i's namet . I was left with a file maps 3.08 4kb in size which couldn't be deleted but I continued and installed Maps 3.06 again and after a little fine tuning I can now navigate with data turned off again. Yahoooeeeeee

Cannot Start Service Bus Domain from ANT script

Hi,
I am preparing a script which buils service bus domain using wlst script and then makes a jar file of the newly build domain and transfer it to the target location where it need to run.
Once the jar file is in target location is jar is expanded in a folder.
The above mentioned process if working fine. If i try to start the domain from that location either by double clicking startWebLogic.cmd or from dos prompt it does start the domain wihtout any error.
However if i try to start the domain from with the same ANT script either using <wlserver> or <java classname="weblogic.WLST"> using startServer ('AdminServer','mydomainname','weblogic','weblogic','t3://localhost:7001') the domain startup does start but failes with same weblogic.management.deployment exception.
complaining about all alsb specific applications error i.e.
java.lang.ClassNotFoundException: com.bea.wli.sb.init.MarkerAppListener/com.bea.wli.sb.init.FrameworkStarter ..... under weblogic.management.deloymentexception.
had anyone manager to start domain like this? any help?
thanks
salman

I faced a similar issue when all ALSB specific applications were failing with ClassNot Found error when the managed servers were started using node manager. This was fixed by setting up the right Server Classpath for the WLS server.
The issue was fixed after setting up the CLASSPATH to use when starting up the server as below, where E:/APPS/STAGE/OSB103 is the BEA_HOME
E:\APPS\STAGE\OSB103\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\APPS\STAGE\OSB103\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\APPS\STAGE\OSB103\patch_cie670\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\APPS\STAGE\OSB103\patch_alsb1031\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\APPS\STAGE\OSB103\JROCKI~1\lib\tools.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\server\lib\weblogic_sp.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\server\lib\weblogic.jar;E:\APPS\STAGE\OSB103\modules\features\weblogic.server.modules_10.3.0.0.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\server\lib\webservices.jar;E:\APPS\STAGE\OSB103\modules\ORGAPA~1.5/lib/ant-all.jar;E:\APPS\STAGE\OSB103\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;E:\APPS\STAGE\OSB103\WLSERV~1.3\..\modules\features\osb.server.modules_10.3.1.0.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\flow\sb-flow.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\..\modules\com.bea.core.jaxen_1.0.1.0_1-1-1.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\version.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\alsb.jar;E:\APPS\STAGE\OSB103\osb_10.3\3rdparty\lib\j2ssh-ant.jar;E:\APPS\STAGE\OSB103\osb_10.3\3rdparty\lib\j2ssh-common.jar;E:\APPS\STAGE\OSB103\osb_10.3\3rdparty\lib\j2ssh-core.jar;E:\APPS\STAGE\OSB103\osb_10.3\3rdparty\lib\j2ssh-dameon.jar;E:\APPS\STAGE\OSB103\osb_10.3\3rdparty\classes;E:\APPS\STAGE\OSB103\WLSERV~1.3\..\modules\com.bea.core.apache.commons.logging_1.1.0.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\transports\jca\jca-binding-api.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\transports\jca\bpm-infra.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\transports\E:\APPS\STAGE\OSB103\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\APPS\STAGE\OSB103\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\APPS\STAGE\OSB103\patch_cie670\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\APPS\STAGE\OSB103\patch_alsb1031\profiles\default\sys_manifest_classpath\weblogic_patch.jar;E:\APPS\STAGE\OSB103\JROCKI~1\lib\tools.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\server\lib\weblogic_sp.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\server\lib\weblogic.jar;E:\APPS\STAGE\OSB103\modules\features\weblogic.server.modules_10.3.0.0.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\server\lib\webservices.jar;E:\APPS\STAGE\OSB103\modules\ORGAPA~1.5/lib/ant-all.jar;E:\APPS\STAGE\OSB103\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;E:\APPS\STAGE\OSB103\WLSERV~1.3\..\modules\features\osb.server.modules_10.3.1.0.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\flow\sb-flow.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\..\modules\com.bea.core.jaxen_1.0.1.0_1-1-1.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\version.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\alsb.jar;E:\APPS\STAGE\OSB103\osb_10.3\3rdparty\lib\j2ssh-ant.jar;E:\APPS\STAGE\OSB103\osb_10.3\3rdparty\lib\j2ssh-common.jar;E:\APPS\STAGE\OSB103\osb_10.3\3rdparty\lib\j2ssh-core.jar;E:\APPS\STAGE\OSB103\osb_10.3\3rdparty\lib\j2ssh-dameon.jar;E:\APPS\STAGE\OSB103\osb_10.3\3rdparty\classes;E:\APPS\STAGE\OSB103\WLSERV~1.3\..\modules\com.bea.core.apache.commons.logging_1.1.0.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\transports\jca\jca-binding-api.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\transports\jca\bpm-infra.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\transports\jca\log4j_1.2.8.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\transports\jca\xmlparserv2.jar;WL_HOME\server\ext\jdbc\oracle\orai18n.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\server\lib\xqrl.jar;jca\log4j_1.2.8.jar;E:\APPS\STAGE\OSB103\osb_10.3\lib\transports\jca\xmlparserv2.jar;WL_HOME\server\ext\jdbc\oracle\orai18n.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;E:\APPS\STAGE\OSB103\WLSERV~1.3\server\lib\xqrl.jar;
-Atheek

Cannot start Outlook 2007, a program error occurred. Tried lots of things....

I'm getting an error message of: "Cannot start Microsoft Office Outlook. A program error occurred. Quite Outlook and Microsoft Windows and then start again. A program error occurred. Quite Outlook and Microsoft Windows and then start again." when
I try to start Outlook 2007 running on windows 8.1. (standalone with pst file, not exchange)
I have tried:
Restarting computer (hard boot)
Running in safe mode: Outlook /safe
Resetting the nav panel: Outlook /resetnavpane
Running scanpst on the pst files.
Outlook /cleanprofile
Creating a new profile
Checking if windows search is running (it was) and restarting it.
All with the same error message.
I'm stumped. Any ideas how to get Outlook to open? Was there some sort of windows update that ran last night and messed up Outlook? It worked at end of day yesterday.
Thanks in advance.

Thank you for the update, seems the problem has been resolved, right? If this issue comes back or you need further assistance on it, please feel free to contact us.
Cheers,
Steve Fan
TechNet Community Support

After MS13-098 and SecurityAdvisory(2915720), Windows Server 2003 Remote Desktop(TermService) cannot start service

I have trouble with Windows Server 2003 R2 Standard. I installed the KB2893294(MS13-098) patch, and I changed the registry that is suggested actions of Security Advisory(2915720) http://technet.microsoft.com/en-us/security/advisory/2915720
Suggested Actions:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Cryptography\Wintrust\Config]
"EnableCertPaddingCheck"="1"
After rebooting the event viewer(system) says:
Event Type: Error
Event Source: TermService
Event Category: None
Event ID: 1014
User: N/A
Description:
Cannot load illegal module: C:\Windows\system32\rdpwsx.DLL
After I cannot use Remote Desktop Connection from other client.
So I check the all security patches and other hotfixies. I checked the KB2653956 and KB958476.
But TermService do not recover the error.
And then, I delete the "EnableCertPaddingCheck" registry and reboot systems.
TermService have no error. I can use Remote Desktop Connection from other client.
After KB2893294 installed, Remote Desktop Connection cannot use from other client that "EnableCertPaddingCheck" registry set to "1".
Other Windows Server 2008 systems do not effect the KB2893294 patch. But All Windows Server 2003 systems cannot use the Remote Desktop Connections after the KB2893294 patch.

Update on this issue:
The debug team has accepted the issue and has identified it as a regression. Right now they're targeting *June* as the release date for a fix. I'm attempting to educate them that customers don't just install patches the day (or even month) they're
released and that the fix needs to be moved up in priority to give a minimum of 60 days to install the patch before the time-bomb explodes.
In the meantime, a workaround has been provided that will turn off the new functionality. Note that I have not yet had a chance to test this. It entails creating a new DWORD registry entry--UseLegacyPE--and setting it to 1.
HKLM\Software\Microsoft\Windows NT\CurrentVersion\ImageHlp\UseLegacyPE
I will update this thread when I have further information.

Cannot update using Apples Store, get error -1012 and (20) iMac 10.9.4

iMac OS X 10.9.4 Safari 7.0.5 Apple Store update for iMovie comes up with error -1012 and also (20)

Try again or contact the App Store.
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

Error recovery server, message: Service 'Microsoft Exchange Service Host (MSExchangeServiceHost)' cannot be started due to the following error: Cannot start service MSExchangeServiceHost on computer

I have issue with second exchange server while trying to restore recovery mode. If we do ADIEDIT as per your previous article will that going to cause issue to the existing Exchange Server ?

Hi Najeeb,
I'm not sure if doing some actions via ADSI Edit can affect the existing Exchange server.
I recommend you follow the steps below for troubleshooting.
1. Please use the get-service msexch* | set-service -startuptype automatic cmdlet to set the service state to automatic for all the Exchange services.
2. Start the Microsoft Exchange Service Host service and other required services.
What's more, I would like to verify if you install Forefront Protection for Exchange Server, if yes, please disable it and check the result.
Hope my clarification is helpful.
If there are any problems, please feel free to let me know.
Best regards,
Amy
Amy Wang
TechNet Community Support

Crystal Server Install Cannot Start Services

Windows Server 2003
Sql Server 2005
Crystal Server 11
New installation and we cannot get the services to start to finish the install.
Error: 1920. Service 'Crystal Reports Cache Server' failed to start. Verify Privileges. Same message for 'Job Services' and 'Page services'.
default user - local user. In services we changed to administrator for login - NO. Some say use local admin - but this is domain controller (no local users). What is the solution?
Thanks,
SS

Have you tried using a domain account with local Admin privileges?

Cannot start services in Mewdia Center (errors 0x80070005 and 70006)

Similar Messages

Maybe you are looking for