Cannot start SIA in BI4.1 while configuring SSO

Hi All,
I am trying to configure SSO for windows AD.   My environment is Windows 2012 server and BO 4.1 SP2. 
i have followed all the guides and previous discussions but i am getting stuck when I need to set the SIA to use the service account we created. 
All my SPNS look fine, users mapped ok in CMC, added service account to local admin group as well as "part of operating system policy" but once i stop SIA and enter the service account and PW i get an error "Access Denied"
i have not seen any other discussions with my exact environment of Windows 2012 and BI 4.1 SP2
Any suggestions?
Daniel

Hi Daniel,
Few suggestions from my side.
1. Along with "Act as a part of Operating System" grant the user "Logon as Batch Job" and "Logon as service".
2. Explicitly grant the user Full control over the install directory of BI 4.1
3. I have never worked on Windows 2012 but assuming it will have UAC as in Windows 2008. So while opening CCM, right click CCM and specify "Run as Administrator" and try doing the changes.
Hope this helps.
Regards
Chinmaya

Similar Messages

  • "User names cannot start with a number" error while adding a user

    Is it possible to use WL Portal 7.0 admin framework to manage users with all numeric
    user id ?
    I got an error "User names cannot start with a number" while trying to add users
    with all numeric user ids. I am using "portalAppTools" web app provided with WL
    7.0 out of the box.
    What "out the box" functionality do I need to change to make this happen ? Thanks
    Shah

    The problem is that when we have user groups starting with a number, then the search
    feature doesn't work for user groups (case # 466837 with BEA).
    So, which brings me to the following question:
    a. Should the search feature work?
    b. What is the limitation? I mean, it is designed not to allow user groups starting
    with a number. So, there must be a reason for this. So, if we change "disallowFirstCharDigit",
    will it have any impacts on Portal?
    As an aside, it seems somewhat strange that the Portals can start with a number!
    Thanks in advance
    Venkatesh
    "Ture Hoefner" <replyto@newsgroup> wrote:
    Hello Shah,
    Search your tools web app for the UsermgmtTools.properties file. In
    my
    installation, it is at:
    D:\bea70sp1\weblogic700\samples\portal\sampleportalDomain\beaApps\sampleport
    al\tools\WEB-INF\classes\com\bea\jsptools\p13n\usermgmt\servlets\jsp
    It starts with this:
    # Messages and other properties used by usermgmt jsp tools
    # Name properties - UserBean and GroupBean
    disallowedCharacters: ~`!$%^&-*() {}[]|\\/?<>,:;+="'
    disallowFirstCharDigit: true
    Ture Hoefner
    BEA Systems, Inc.
    www.bea.com
    "Shah Sidi" <[email protected]> wrote in message
    news:3db0a001$[email protected]..
    Is it possible to use WL Portal 7.0 admin framework to manage userswith
    all numeric
    user id ?
    I got an error "User names cannot start with a number" while tryingto add
    users
    with all numeric user ids. I am using "portalAppTools" web app providedwith WL
    7.0 out of the box.
    What "out the box" functionality do I need to change to make this happen?
    Thanks
    Shah

  • Error  while configuring SSO between Portal 7.0 and Operating System.

    Dear all,
    I am having an issue,i need to configure SSO between the Portal 7.0 and operating System.I have followed both the Kerberos as well as spNego wizard methods,but i am not able to configure UME settings as we are using datasourceConfiguration_abap.xml. I tried to edit the datasource confuiguration file but after editing the server is not starting.
    Please let me know the steps i have to do to edit the datasourceConfiguration_abap.xml
    We are not able to Map the Service USer to the UME CONFIGURATION XML File.
    Thanks
    Ravi.S

    Ravi,
    If you have successfully configured the SSO, please pass on the document if any you have.
    Regards,
    Mohammad.

  • CD/DVDW SN-S082D issue - Windows cannot start this hardware device Code 19

    I've had my laptop for a little over a year now and it's had it's fair share of problems, most of which are fixable or there is a workaround.
    Earlier today I inserted a disc into the drive and tried opening it up, went into "My Computer" and found the disc drive was not listed.
    This has happened once or twice before and a simple restart fixes the problem.
    I've restarted twice and this time the problem wasn't fixed, after going into "Device Manager" I found there was a problem with the device and it gave me the following error
    "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
    Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available."
    As usual 'Check for soulutions' is useless and returned no results.
    Thanks in advance for any replies.
    Some info that may help
    OS: Windows Vista Home Premuim
    Laptop Model / Number: Medion MD 98300
    DVD Drive: TSSTCorp CD/DVD W SN-S082D ATA Device
    Thanks

    First of all I wonder why you post this here in the Toshiba forum if you dont have a Toshiba notebook
    This is a little bit strange for me... anyway I will try to help you.
    It seems that the registry keys are corrupt and therefore your CD/DVD drive cannot work properly.
    Try simply the solution proposal mentioned here in the Microsoft doc:
    http://support.microsoft.com/kb/270008/en-us
    Good luck

  • ERROR: Cannot start mail services, configuration directory does not exist

    I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
    Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
    Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
    I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
    Is this something to worry about?

    Hi Joel,
    You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
    Jeff

  • Configured Oracle Web Tier, cannot start opmn

    Hi,I am new to server technologies.
    I have installed WebCenter Suite. Now I want to config OAM to use SSO. Refering to Administrator's Guide for Oracle WebCenter I should install Oracle Web Tier first.
    But when I Configured Oracle Web Tier ( address ), I cannot start opmn.
    Appreciate your help
    Best Regards,
    Sunny.Zhang
    Edited by: Sunny.Zhang on 2009-9-21 上午11:46

    Hi Sunny
    Hope you had successfully installed the WebTier. I tried 2,3 times to install it on WINDOWS SERVER 2003 but it is throwing following exception during "Create and Start OHS Component) at configuration stage. Did you get similar type of exception?
    Not sure it was due to any conflicts with any of already installed Database 11g, Web Logic, SOA Suite.
    Help is appreciated.
    Trying to Reload OPMN **************
    [2009-09-23T21:06:39.828-04:00] [as] [NOTIFICATION] [] [oracle.as.install.config] [tid: 17] [ecid: 0000IFd_KuTDwWWFLzqIOA1AigEL000008,0] *************** Executing Command **************
    [2009-09-23T21:06:39.828-04:00] [as] [NOTIFICATION] [] [oracle.as.install.config] [tid: 17] [ecid: 0000IFd_KuTDwWWFLzqIOA1AigEL000008,0] cmd /c D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\reloadOpmn1253754399828.bat
    [2009-09-23T21:06:39.828-04:00] [as] [NOTIFICATION] [] [oracle.as.install.config] [tid: 17] [ecid: 0000IFd_KuTDwWWFLzqIOA1AigEL000008,0] ***************************************************
    [2009-09-23T21:06:48.031-04:00] [as] [WARNING] [] [oracle.as.config] [tid: 17] [ecid: 0000IFd_KuTDwWWFLzqIOA1AigEL000008,0] Failed to start component WTohs1[[
    oracle.as.config.ProvisionException: HTTP status code = 204 : 0 of 1 processes started.
         at oracle.as.config.impl.OracleASComponentBaseImpl.manageProcess(OracleASComponentBaseImpl.java:892)
         at oracle.as.config.impl.OracleASComponentBaseImpl.start(OracleASComponentBaseImpl.java:1011)
         at oracle.as.install.webtiercd.webtierconfig.util.CreateComponent.createOHSComponentWrapper(CreateComponent.java:153)
         at oracle.as.install.webtiercd.webtierconfig.util.CreateComponent.createStandaloneOHSComponent(CreateComponent.java:82)
         at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureOHSStandalone(WebtierConfigurationAction.java:550)
         at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:448)
         at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:179)
         at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
         at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
         at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
         at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
         at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
         at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
         at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:82)
         at java.lang.Thread.run(Thread.java:619)

  • Cannot find Connector type while configuring UWS

    Hi,
           Am inplementing ESS/MSS for EP 7.01 SP6. While Configuring Universal Worklist systems, Am unable to find the connecter type SomProviderConnector.
    Appreciate your help...

    Hi Mcsekar,
    Adding to Koti..
    SONiC connector is usefull for Configuring Universal Worklist systems. You need to deploy SONiC SDA file in the J2EE server and then you need to configure using SAP PDF document u2018How To Install SAP Office Connectoru2019.
    For Testing
    Then Log into R3 system and run transaction SWUI.
    Select workflow WF_VERIFY032 and press the Start Button.
    Select u201CAs Internal Mailu201D from the options on the next screen.
    You should see the message u201CWorkflow Startedu201D.
    Navigate to transaction SBWP (SAP Business Workplace) an check that a new notification appears in the user inbox.
    Log into the portal (with the same user) and navigate to the Universal Worklist (UWL). Ensure that the UWL iView is configured to connect to the SONiC service. Now the new notification item should appear on the Notifications tab of the UWL.
    Hope it helps
    Regards
    Arun

  • Firmware update was done on my MacBook Air while connected to power source and now I cannot start up. It keeps shutting down. Any ideas??

    Firmware update was done on my MacBook Air while connected to power source and now I cannot start up. It keeps shutting down. Any ideas??

    Start by doing an SMC reset http://support.apple.com/kb/HT3964 and see if that resolves it.

  • Cannot start & configure ColorBurst RIP

    Hi all
    I have just purchased the Epson Stylus Pro 3800 Professional Printer. After installing the ColorBurst RIP software that was included with the printer I am unable to start ColorBurst RIP in order to configure. I am repeatedly getting the following window:
    "Printer Sharing is on. ColorBurst cannot receive files when Printer Sharing is on. Please disable Printer Sharing and restart you computer..."
    Per instructions, Printer Sharing has been turned off. The computer retarted. I still get this window when attempting to start ColorBurst RIP. I have repeatedly double check, and restarted. I have also reinstalled the ColorBurst RIP software. I am still getting this window which will not allow me to start ColorBurst.
    ColorBurst Systems directs all tech support questions regarding RIP software bundled with Epson printers to Epson. I have emailed Epson.
    Any ideas?
    Thanks, W2
    G5 2.0 Ghz   Mac OS X (10.4.9)  

    I FOUND the issue.
    In my environment, the "Net.Tcp Port Sharing Service" had been set to disabled.  For the Search Host controller to be able to start, this must at least be set to 'Manual' start-up.

  • My 2007 iMac 24" now retired as working machine but serves as entertainment center for granddaughters and me, 'attacked' while on Youtube and cannot start up. In need of first aid to get it going again...

    My 2007 iMac 24" attacked' while on Youtube and cannot start up. I need first aid to get it going again...
    True, it's retired as working machine but serves as family entertainment center.

    At this point you have 2 choices.
    Erase the disk entirely and reinstall (you will lose everything that is not backed up)
    Take it to an Apple Store (you will probably lose everything that is not backed up)
    I believe this is a hardware (HDD) issue and would expect a Store trip to be the best approach, sorry.
    BUT
    Did you try a safe mode start?

  • A lot of problem for an error: Cannot start Managed Server through NM

    Hi, all. Thank for coming here.
    My main problem is cannot start Manager server through Node Manager. I've configured with the same way on my friend's network and It's works but It's wrong with mine.
    my weblogic domain:
    Machine 1: Administration Server + 1 Managed server
    Machine 2: 1 Managed server
    all of these servers communicate through SSL protocol. When I try to start Managed Server on remote machine:
    output from console which was invoked startWebLogic.sh
    +<Sep 9, 2010 12:09:53 PM> <INFO> <devdomain> <MS01> <Server failed during startup so will not be restarted>+
    Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.ServerManager log
    INFO: Server failed during startup so will not be restarted
    +<Sep 9, 2010 12:09:53 PM> <WARNING> <Exception while starting server 'MS01'>+
    java.io.IOException: Server failed to start up. See server output log for more details.
    at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
    at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
    at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
    at weblogic.nodemanager.server.Handler.run(Handler.java:70)
    at java.lang.Thread.run(Thread.java:619)
    Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.Handler handleStart
    WARNING: Exception while starting server 'MS01'
    java.io.IOException: Server failed to start up. See server output log for more details.
    at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
    at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
    at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
    at weblogic.nodemanager.server.Handler.run(Handler.java:70)
    at java.lang.Thread.run(Thread.java:619)
    And this is MS01 log:
    starting weblogic with Java version:
    ERROR: transport error 202: bind failed: Address already in use
    ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
    +JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]+
    The application has requested the JVM to exit with an fatal error from JNI. Error message:
    JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
    Starting WLS with line:
    +/opt/Oracle/Middleware/jrockit_160_14_R27.6.5-32/bin/java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms512m -Xmx512m -Dweblogic.Name=MS01 -Djava.security.policy=/opt/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.system.BootIdentityFile=/opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.ReverseDNSAllowed=false -Xrs -Xverify:none -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=/opt/Oracle/Middleware/wlserver_10.3 -Dwls.home=/opt/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/opt/Oracle/Middleware/wlserver_10.3/server -Dweblogic.wsee.bind.suppressDeployErrorMessage=true -Dweblogic.wsee.skip.async.response=true -Dweblogic.management.discover=false -Dweblogic.management.server=http://192.168.1.35:7001 -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.logErrorsToConsole=true -Dweblogic.ext.dirs=/opt/Oracle/Middleware/patch_wls1032/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/patch_wlp1032/profiles/default/sysext_manifest_classpath:/opt/Oracle/Middleware/wlportal_10.3/p13n/lib/system:/opt/Oracle/Middleware/wlportal_10.3/light-portal/lib/system:/opt/Oracle/Middleware/wlportal_10.3/portal/lib/system:/opt/Oracle/Middleware/wlportal_10.3/info-mgmt/lib/system:/opt/Oracle/Middleware/wlportal_10.3/analytics/lib/system:/opt/Oracle/Middleware/wlportal_10.3/apps/lib/system:/opt/Oracle/Middleware/wlportal_10.3/info-mgmt/deprecated/lib/system:/opt/Oracle/Middleware/wlportal_10.3/content-mgmt/lib/system -Dweblogic.alternateTypesDirectory=/opt/Oracle/Middleware/wlportal_10.3/portal/lib/security weblogic.Server+
    ERROR: transport error 202: bind failed: Address already in use
    ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
    +JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]+
    The application has requested the JVM to exit with an fatal error from JNI. Error message:
    JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
    Stopping PointBase server...
    PointBase server stopped.
    And this is output from console which node manager runs on:
    +<Sep 9, 2010 12:09:53 PM> <INFO> <devdomain> <MS01> <Server failed during startup so will not be restarted>+
    Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.ServerManager log
    INFO: Server failed during startup so will not be restarted
    +<Sep 9, 2010 12:09:53 PM> <WARNING> <Exception while starting server 'MS01'>+
    java.io.IOException: Server failed to start up. See server output log for more details.
    at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
    at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
    at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
    at weblogic.nodemanager.server.Handler.run(Handler.java:70)
    at java.lang.Thread.run(Thread.java:619)
    Sep 9, 2010 12:09:53 PM weblogic.nodemanager.server.Handler handleStart
    WARNING: Exception while starting server 'MS01'
    java.io.IOException: Server failed to start up. See server output log for more details.
    at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
    at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
    at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
    at weblogic.nodemanager.server.Handler.run(Handler.java:70)
    at java.lang.Thread.run(Thread.java:619)
    I tried to start Managed server some times again, but I face up to strange issue, this is output from console which Admin Server runs on (these exception messages throws continuously):
    +<Sep 9, 2010 12:42:53 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceNeverXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
    +<Sep 9, 2010 12:42:57 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "cgDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
    +<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "cgDataSource-nonXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
    +<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "p13nDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
    +<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSource": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
    +<Sep 9, 2010 12:42:58 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "portalDataSourceAlwaysXA": SQL-server rejected establishment of SQL-connection. Pointbase Server may not be running on localhost at port 9093.>+
    I can ensure that all of these connection pool has configured to run on 9093 port already. Then I view the DOMAIN_NAME/pointbase.log, it said:
    Unable to start the server. start server error: java.net.BindException: Address already in use
    I cannot understand what's run on pointbase address ?
    All of these error make me angry, because I've configured with the same way on other system and It's work. I've spent all of week to fix these bug, but I'm having nothing :((
    Please help me.

    Thank Jay SenSharma.
    I've looked for these JAVA_OPTION values you said, but I cant found them. That value is content of JAVA_DEBUG option, not JAVA_OPTION. In my situation, JAVA_DEBUG=" " (it's not set by default).
    Please re-view my error log:
    Node Manager output:
    +<Sep 9, 2010 11:32:44 PM> <WARNING> <Exception while starting server 'MS01'>+
    java.io.IOException: Server failed to start up. See server output log for more details.
    at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
    at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
    at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
    at weblogic.nodemanager.server.Handler.run(Handler.java:70)
    at java.lang.Thread.run(Thread.java:619)
    Sep 9, 2010 11:32:44 PM weblogic.nodemanager.server.Handler handleStart
    WARNING: Exception while starting server 'MS01'
    java.io.IOException: Server failed to start up. See server output log for more details.
    at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331)
    at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541)
    at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:118)
    at weblogic.nodemanager.server.Handler.run(Handler.java:70)
    at java.lang.Thread.run(Thread.java:619)
    Managed server MS01's log:
    +<Sep 9, 2010 11:45:05 PM> <INFO> <NodeManager> <Server output log file is '/opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.out'>+
    +<Sep 9, 2010 11:45:07 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.5-32_o-121899-1.6.0_14-20091001-2113-linux-ia32 from BEA Systems, Inc.>+
    +<Sep 9, 2010 11:45:09 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 9216172 Tue Jan 12 02:07:27 PST 2010+
    WebLogic Server 10.3.2.0  Tue Oct 20 12:16:15 PDT 2009 1267925 >
    +<Sep 9, 2010 11:45:13 PM EDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/Middleware/user_projects/domains/devdomain/config/config.xml - Invalid xsi:type qname: 'wsrp:wsrp-identity-asserterType' in element realm@http://xmlns.oracle.com/weblogic/domain>+
    +<Sep 9, 2010 11:45:13 PM EDT> <Error> <Management> <BEA-141244> <Schema validation errors while parsing /opt/Oracle/Middleware/user_projects/domains/devdomain/config/config.xml - /opt/Oracle/Middleware/user_projects/domains/devdomain/<unknown>:11:9: error: failed to load java type corresponding to t=wsrp-identity-asserterType@http://www.bea.com/ns/wlp/90/security/wsrp>+
    +<Sep 9, 2010 11:45:14 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>+
    +<Sep 9, 2010 11:45:14 PM EDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>+
    +<Sep 9, 2010 11:45:14 PM EDT> <Notice> <LoggingService> <BEA-320400> <The log file /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>+
    +<Sep 9, 2010 11:45:14 PM EDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log00002. Log messages will continue to be logged in /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log.>+
    +<Sep 9, 2010 11:45:14 PM EDT> <Notice> <Log Management> <BEA-170019> <The server log file /opt/Oracle/Middleware/user_projects/domains/devdomain/servers/MS01/logs/MS01.log is opened. All server side log events will be written to this file.>+
    +<Sep 9, 2010 11:45:17 PM EDT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory". See the nested exception for details..+
    weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory".  See the nested exception for details.
    +     at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:342)+
    +     at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)+
    +     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)+
    +     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)+
    +     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)+
    +     Truncated. see log file for complete stacktrace+
    Caused By: com.bea.common.engine.ServiceInitializationException: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory".  See the nested exception for details.
    +     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)+
    +     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)+
    +     at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)+
    +     at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)+
    +     at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)+
    +     Truncated. see log file for complete stacktrace+
    Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal internal error> org.apache.openjpa.util.InternalException: There was an error when invoking the static getInstance method on the named factory class "kodo.jdbc.kernel.KodoJDBCBrokerFactory".  See the nested exception for details.
    +     at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:95)+
    +     at com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSerivceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)+
    +     at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:145)+
    +     at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:98)+
    +     at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)+
    +     Truncated. see log file for complete stacktrace+
    Caused By: java.lang.RuntimeException: There were errors initializing your configuration: <openjpa-1.1.1-SNAPSHOT-r422266:807362 fatal store error> org.apache.openjpa.util.StoreException: com.pointbase.jdbc.jdbcUniversalDriver
    +     at org.apache.openjpa.jdbc.schema.DataSourceFactory.newDataSource(DataSourceFactory.java:123)+
    +     at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.createConnectionFactory(JDBCConfigurationImpl.java:776)+
    +     at org.apache.openjpa.jdbc.conf.JDBCConfigurationImpl.getConnectionFactory(JDBCConfigurationImpl.java:683)+
    +     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
    +     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
    +     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
    +     at java.lang.reflect.Method.invoke(Method.java:597)+
    +     at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:288)+
    +     at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1409)+
    +     at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:646)+
    +     at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:131)+
    +     at kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory.java:43)+
    +     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
    +     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
    +     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
    +     at java.lang.reflect.Method.invoke(Method.java:597)+
    +     at org.apache.openjpa.kernel.Bootstrap.invokeFactory(Bootstrap.java:124)+
    +     at org.apache.openjpa.kernel.Bootstrap.getBrokerFactory(Bootstrap.java:90)+
    +     at com.bea.common.security.storeservice.util.StoreServiceDelegate$StoreSerivceHelper.getPersistenceManagerFactory(StoreServiceDelegate.java:347)+
    +     at com.bea.common.security.storeservice.util.StoreServiceDelegate.initJDO(StoreServiceDelegate.java:145)+
    +     at com.bea.common.security.storeservice.util.StoreServiceDelegate.<init>(StoreServiceDelegate.java:98)+
    +     at com.bea.common.security.internal.service.StoreServiceImpl.init(StoreServiceImpl.java:76)+
    +     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)+
    +     at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)+
    +     at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)+
    +     at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)+
    +     at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:47)+
    +     at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:300)+
    +     at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:221)+
    +     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1783)+
    +     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)+
    +     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)+
    +     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)+
    +     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)+
    +     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)+
    +     at weblogic.security.SecurityService.start(SecurityService.java:141)+
    +     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
    +     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
    +     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+
    Caused by: java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
    +     at java.lang.Class.forName0(Native Method)+
    +     at java.lang.Class.forName(Class.java:169)+
    +     at org.apache.openjpa.jdbc.schema.DataSourceFactory.newDataSource(DataSourceFactory.java:85)+
    +     ... 38 more+
    +     at org.apache.openjpa.lib.conf.ConfigurationImpl.instantiateAll(ConfigurationImpl.java:302)+
    +     at org.apache.openjpa.conf.OpenJPAConfigurationImpl.instantiateAll(OpenJPAConfigurationImpl.java:1409)+
    +     at org.apache.openjpa.kernel.AbstractBrokerFactory.makeReadOnly(AbstractBrokerFactory.java:646)+
    +     at org.apache.openjpa.kernel.AbstractBrokerFactory.pool(AbstractBrokerFactory.java:131)+
    +     at kodo.jdbc.kernel.KodoJDBCBrokerFactory.getInstance(KodoJDBCBrokerFactory.java:43)+
    +     Truncated. see log file for complete stacktrace+
    +>+
    +<Sep 9, 2010 11:45:17 PM EDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>+
    +<Sep 9, 2010 11:45:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:+
    There are 1 nested errors:
    +weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable+
    +     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)+
    +     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)+
    +     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)+
    +     at weblogic.security.SecurityService.start(SecurityService.java:141)+
    +     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
    +     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)+
    +     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)+
    +>+
    +<Sep 9, 2010 11:45:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>+
    +<Sep 9, 2010 11:45:17 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>+
    +<Sep 9, 2010 11:45:17 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>+
    +<Sep 9, 2010 11:45:17 PM> <FINEST> <NodeManager> <Waiting for the process to die: 16443>+
    +<Sep 9, 2010 11:45:17 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>+
    +<Sep 9, 2010 11:45:18 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>+
    ps:
    I've come your weblog and found alot of tips for debugging WebLogic Server exceptions. It's really helpful. Thanks.
    Edited by: Doubt_Man on Sep 10, 2010 10:49 AM
    Edited by: Doubt_Man on Sep 10, 2010 3:54 PM

  • Error while configuring saprouter

    Hi,
    I m getting error while configuring saprouter.
    When i run the command get_pse -v -r certreq -p local.pse"DN name".I get the following error.
    get_pse: Malformed distinguished name "pqprojsrv  CN=pqprojsrv, OU=0000756782, O
    U=SAProuter, O=SAP, C=DE"
    ERROR in Name2DName: (12321/0x3021) problem parsing DName : "unknown key or malf
    ormed OID"
    ERROR in aux_Name2ObjId: (1/0x0001) unknown algorithm : "PQPROJSRV  CN"
    Please suggest on this .
    Thanks in advance.
    Regards,
    Amit

    Hi,
    I resolved tht issue.but  now when im starting saprouter it gives me following error :
    trcfile  dev_rout
    no logging active
    routtab  cannot open './saprouttab': EXIT PROGRAM !!!
             (running without saproutab is no longer supported for security reasons)
    Could not open permission table
    saprouttab is nt created in saprouter directory.
    Please suggest
    Thanks in advance.
    Regards,
    Amit

  • Cannot start SQL Server Agent (Version 2014 enterprise core)?

    The SQL Server Agent log file has the following information. I already set the firewall for inbound 1433.
    2014-11-04 11:59:43 - ? [100] Microsoft SQLServerAgent version 12.0.2000.8 (X64 unicode retail build) : Process ID 6108
    2014-11-04 11:59:43 - ? [495] The SQL Server Agent startup service account is ......
    2014-11-04 11:59:43 - ! [150] SQL Server does not accept the connection (error: 0). Waiting for Sql Server to allow connections. Operation attempted was: Verify Connection On Start.
    2014-11-04 11:59:43 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
    2014-11-04 11:59:43 - ! [298] SQLServer Error: 27, Registry information is corrupt or missing. Make sure the provider is installed and registered correctly. [SQLSTATE 08001]
    2014-11-04 11:59:43 - ! [298] SQLServer Error: 27, Client unable to establish connection [SQLSTATE 08001]
    2014-11-04 11:59:43 - ! [165] ODBC Error: 0, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to
    allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
    2014-11-04 11:59:43 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
    2014-11-04 11:59:43 - ? [098] SQLServerAgent terminated (normally

    Is this new SQL Server installation or originally it was working fine ?
    Below message makes me think you might as well need to repair your installation
    >SQLServer Error: 27, Registry information is corrupt or missing. Make sure the provider is installed and registered correctly. [SQLSTATE 08001]
    Please see below  link
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/d2a97cf4-54b2-40b7-836a-b9f146442855/unable-to-open-sql-server-logs?forum=sqlsetupandupgrade
    Without errorlog it would be difficult to say why this happened but as errorlog says it has found registry inconsistent so repairing installation would help
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Cannot Start SI4 After New License

    I have a test drive version of NW 4 running on Suse 9.2 Linux and db2.  It ran fine for 3 months.  Yesterday I installed a new license because the old one expired.  I installed it as root while the db was running.
    This morning, I cannot start sap, because the database won't start.
    The following is the output of R3trans.  Can anyone give me any suggestions on things to try to resolve it?
    4 ETW000 R3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 30.10.2005 - 07:08:07
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d -w xx.log
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Sun Oct 30 07:08:07 2005                             148  0.000148
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    27  0.000175
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                             59  0.000234
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' ...
    4 ETW000                                                                              57  0.000291
    4 ETW000  [dev trc     ,00000]  load shared library (/usr/sap/SI4/SYS/exe/run/dbdb6slib.so), hdl 0
    4 ETW000                                                                           21464  0.021755
    4 ETW000  [dev trc     ,00000]  Library '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' loaded
    4 ETW000                                                                              59  0.021814
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              59  0.021873
    4 ETW000  [dev trc     ,00000]  Version of '/usr/sap/SI4/SYS/exe/run/dbdb6slib.so' is "640.00", patchlevel (0.7)
    4 ETW000                                                                             137  0.022010
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              40  0.022050
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library /usr/sap/SI4/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              40  0.022090
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              35  0.022125
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              45  0.022170
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         31  0.022201
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              37  0.022238
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              39  0.022277
    4 ETW000  [dev trc     ,00000]  RLIMIT_STACK: current=-1, max=-1                     296  0.022573
    4 ETW000  [dev trc     ,00000]  DB6 (DB2 UDB) database interface 640.00 [opt]         31  0.022604
    4 ETW000  [dev trc     ,00000]  DB6 shared library (dbdb6slib) patchlevels            27  0.022631
    4 ETW000  [dev trc     ,00000]    (0.6) DB6: Schema setting for remote monitoring (note 711477)
    4 ETW000                                                                              36  0.022667
    4 ETW000  [dev trc     ,00000]    (0.7) DB6: support DB6_DB_TYPE=DB2/400 (note 663756)
    4 ETW000                                                                              35  0.022702
    4 ETW000  [dev trc     ,00000]    (0.7) DB6: CTE on UNICODE (note 717357)             23  0.022725
    4 ETW000  [dev trc     ,00000]  Supported features:                                   22  0.022747
    4 ETW000  [dev trc     ,00000]    - smart optlevel handling (non-UR, FAE)             32  0.022779
    4 ETW000  [dev trc     ,00000]    - SQLExtendedBind for LOBs and Unicode (V8 or higher)
    4 ETW000                                                                              38  0.022817
    4 ETW000  [dev trc     ,00000]  ..retrieving configuration parameters                 87  0.022904
    4 ETW000  [dev trc     ,00000]  ..done                                               136  0.023040
    4 ETW000  [dev trc     ,00000]  Sun Oct 30 07:08:08 2005                           97739  0.120779
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1497] (BEGIN)        67  0.120846
    4 ETW000  [dev trc     ,00000]  &+***      DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL1032N  No start database manager command was issued.  SQLSTATE=
    4 ETW000                                                                              46  0.120892
    4 ETW000  [dev trc     ,00000]  &+***      57019                                                                           
    4 ETW000                                                                              37  0.120929
    4 ETW000  [dev trc     ,00000]  &+***                                                                               
    4 ETW000                                                                              36  0.120965
    4 ETW000  [dev trc     ,00000]  &+***                                                                               
    4 ETW000                                                                              37  0.121002
    4 ETW000  [dev trc     ,00000]  &+***      ABAP location info '', 0                                                        
    4 ETW000                                                                              49  0.121051
    4 ETW000  [dev trc     ,00000]  &+***                                                                               
    4 ETW000                                                                              35  0.121086
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1497] (END)          23  0.121109
    4 ETW000  [dbdb6.c     ,00000]  *** ERROR => DbSlConnect to 'SI4' as 'sapsi4' failed
    4 ETW000                                                                             138  0.121247
    2EETW169 no connect possible: "DBMS = DB6                              --- DB2DBDFT = 'SI4'"
    si4host:si4adm 77>
    si4host:si4adm 77> db2admin start
    db2admin: Command not found.
    si4host:si4adm 78> db2admin
    db2admin: Command not found.
    si4host:si4adm 79> db2start
    10/30/2005 07:36:36     0   0   SQL8000N  DB2START processing failed; a valid product license was not found.
    SQL1032N  No start database manager command was issued.  SQLSTATE=57019

    Yes, startsap is the base script, which calls other scripts, R3trans and db2start.
    I didn't have any luck.  I did find an indication on an IBM website that the error message related to the fact that the db2 license had expired.  There is a command called "db2licm" which you can run to update the db2 license, but I couldn't find a license file.
    I wonder if IBM imposes it's own license expiration separate from SAP's, and that IBM require a re-install.  So, I gave up and just re-installed it.  Oh well, re-installing is good practice.
    Sorry I couldn't help you.

  • SQLServerAgent could not be started (reason: Unable to connect to server ' ServerNAme '; SQLServerAgent cannot start)

    Unable to start SQL Agent SQL Server 2008 R2 RTM OS: Windows 2008 R2
    Agent Log
    2012-04-17 22:17:22 - ! [298] SQLServer Error: 27, Registry information is corrupt or missing. Make sure the provider installed and registered correctly. [SQLSTATE 08001]
    2012-04-17 22:17:22 - ! [298] SQLServer Error: 27, Client unable to establish connection [SQLSTATE 08001]
    2012-04-17 22:17:22 - ! [165] ODBC Error: 0, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to
    allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
    2012-04-17 22:17:22 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
    2012-04-17 22:17:22 - ! [298] SQLServer Error: 27, Registry information is corrupt or missing. Make sure the provider installed and registered correctly. [SQLSTATE 08001]
    2012-04-17 22:17:22 - ! [298] SQLServer Error: 27, Client unable to establish connection [SQLSTATE 08001]
    2012-04-17 22:17:22 - ! [165] ODBC Error: 0, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to
    allow remote connections. For more information see SQL Server Books Online. [SQLSTATE 08001]
    2012-04-17 22:17:22 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
    2012-04-17 22:17:23 - ? [098] SQLServerAgent terminated (normally)
    EventLog:
    SQLServerAgent could not be started (reason: Unable to connect to server '<ServerNAme>'; SQLServerAgent cannot start).
    TITLE: Microsoft SQL Server Management Studio
    Unable to start service SQLSERVERAGENT on server <Server Name>. (mscorlib)
    ADDITIONAL INFORMATION:
    The SQLSERVERAGENT service on <Server Name> started and then stopped. (ObjectExplorer)
    BUTTONS:
    OK
    Uninstalled couple of times and Reinstall still getting the same Error and also tried below workarounds:
    sp_configure 'show advanced options', 1;  
    GO  
    RECONFIGURE;  
    GO  
    sp_configure 'Agent XPs', 1;  
    GO  
    RECONFIGURE  
    GO
    [HKLM\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\SQLServerAgent] PATH is Correct
    Can you please share with you if have any fix for this issue.
    Note: Services are running under service account [Domain Account] and also has SA privilage.
    Thanks
    Nag
    Nag Pal MCTS/MCITP (SQL Server 2005/2008) :: Please Mark Answer/vote if it is helpful ::

    Hi Nagpal,
    Just thinking if you can try to Reparing the Native Client setup and see if it works.
    Also if SQL Server Agent account is a domain account (and not as of SQL Server Engine) then try to check if it has below permissions (via Local Policies of the server)  also does it has Local Machine Admin permission:
    Act as part of the operating system
    Adjust memory quotas for a process
    Bypass traverse checking
    Log on as a batch job
    Log on as a service
    Replace a process level token
    Regards Gursethi Blog: http://gursethi.blogspot.com/ ++++ Please mark "Propose As Answer" if my answer helped ++++

Maybe you are looking for