Cannot start trial InDesign Server CC Mac

Following the instructions here:
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/c reativesuite/pdfs/Adobe_Provisioning_Toolkit_Enterprise_Edition_v5.pdf
I run the following command:
./adobe_prtk --tool=StartTrial --leid=InDesignServer-CS6-Mac-GM
This is the response:
Copyright 2012 Adobe Systems Incorporated
All rights reserved.
StartTrial Successful
Return Code = 0
Then I go run InDesign Server:
ERROR
[server] Adobe InDesign Server is not properly licensed and will now quit.
Usage: InDesignServer [options]
What is going on?

Similar Messages

Can not start trial InDesign Server CC 2014 PC

Hi
I tried several time to start a trial version of InDesign Server CC 2014 on my pc but it does not work (licence problem)
If I try to use APTEE (CS6 didn't find any other version) with this command:
adobe_prtk --tool=StartTrial --leid=InDesignServer-10-Win-GM
I have a return code 6
Please help

up

Cannot start the presentation server

Linux OS
OBIEE 11.1.1.5.0
Weblogic Server 10.3.5.0
OBIEE gurus,
I cannot start the presentation server via EM or via the command line ./opmnctl startproc ias-component=coreapplication_obips1.
I get the error in the comman line:
opmnctl startproc: starting opmn managed processes...
================================================================================
opmn id=****:9501
    0 of 1 processes started.
ias-instance id=instance1
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
    coreapplication_obips1/OracleBIPresentationServicesComponent/coreapplication_obips1/
Error
--> Process (index=1,uid=2107403675,pid=27813)
    failed to start a managed process after the maximum retry limit
    Log:
    $ORACLE_INSTANCE/diagnostics/logs/OracleBIPresentationServicesComponent/coreapplication_obips1/console~coreapplication_obips1~1.log
I have checked the log above which contains:
13/07/18 15:27:07 Start process
13/07/18 15:27:14 Start process
13/07/18 15:58:53 Start process
13/07/18 15:59:00 Start process
Not very helpful!
I have checked the OPMN log at $ORACLE_INSTANCE/diagnostics/logs/OPMN/opmn/opmn.log which has the following errors:
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:54][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799)
[2013-07-18T15:58:56][opmn][TRACE:1][][OPMN][code:libopmncustom]Ping failed in Ready callback for proc:2107403675
[2013-07-18T15:58:58][opmn][TRACE:1][][OPMN][code:libopmncustom]Process Ping Failed: coreapplication_obips1~OracleBIPresentationServicesComponent~coreapplication_obips1~1 (2107403675:27799) [No addresses matched the properties for the request.]
I have tried refreshing the user GUIDS, loading another rpd file in through EM that I know works fine in another environment, cleaning the permissions in the web catalog but all so dar have not resulted in me being able to start the presentation server.
I would welcome any feedback on this as it is driving me crazy!
Thanks in anticipation.

Hi ,
I tried it but no use. That thread had some errors displayed in it. But i get just a warning.
Pls help
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:41 2010
File: project/sawserver/sawserver.cpp Line: 604
Properties: ThreadID-1532
Location:
     saw.sawserver
     saw.sawserver.terminatesawserver
     saw.threads
Oracle BI Presentation Services are shutting down.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 386
Properties: ThreadID-968
Location:
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Oracle BI Presentation Services 10.1.3.4.1 (Build 090414.1900) are starting up.
Type: Warning
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/websubsystems/webextensionbase.cpp Line: 380
Properties: ThreadID-968
Location:
     saw.webextensionbase.init.workstationCheck
     saw.webextensionbase.init
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
WARNING: The Oracle BI Presentation Server is running on a workstation class machine (Windows 2000 Workstation, Windows XP Professional, etc.). Number of concurrent users may be severely limited by the operating system.
Type: Information
Severity: 30
Time: Tue Apr 06 10:39:43 2010
File: project/sawserver/sawserver.cpp Line: 459
Properties: ThreadID-968
Location:
     saw.sawserver
     saw.sawserver.initializesawserver
     saw.threads
Oracle BI Presentation Services have started successfully.
Thanks
Jaan

I cant start trial Indesign CS6. The icon appears but when I click it it doesn't start.

I cant start trial Indesign CS6. The icon appears but when I click it it doesn't start.

What's your OS?
What exactly happen when you open the click on your Indesign Icon ?
Did you get any error while installing the software?

[SOLVED] Cannot start i3/ X Server

Hi,
I cannot start my x server or i3 and I have no clue why. My setup is up to date. I am running arch inside vmware and probably there lies the problem.
I normally start i3 using the .xinitrc ("exec i3") if I login from tty1. Doing this now will throw me back to the login screen.
If I login from another tty and enter "i3" or "X" or "startx" the VM will hang-up. It does not start the xserver nor can I Ctr+C or switch ttys.
The particular line where it hangs is "Loading extension GLX". On the last successful login (/var/log/Xorg.0.log) directly after this line would be "LoadModule: vmware".
So my guess is that it's a vmware issue. But I do not know where to look to track down the source of this error.
I know, that I didn't give you much information. But I didn't find anything suspicious in my logfiles. So if you need something pasted here, please let me know.
Regards,
Watnuss
Last edited by Watnuss (2013-03-05 14:52:27)

It's a known bug: https://bugs.archlinux.org/task/34040

Cannot connect to Indesign Server process

We have Indesign Server CS 5.5 (with all patches installed) running inside a Virtual Machine. Our application (c#) also runs in a virtual machine with full admin priv.
Only 1 instance of Indesign Server is configured (using the MMC snap in) and uses the configuration name test (-configuration test) set in the command line arguments.
InDesignServer.exe is started by the service InDesignServerService.
The problem is that the service starts InDesignServer.exe with an unknown configuration name....so our application cannot connect to it. It should be using the configuration name set using the MMC snap in (-configuration test in this case). I also tried specifying the configuration name in the service startup parameters (using services.msc)...that did not work either. \
IndesignServerService DOES create the configuration name folder in C:\ProgramData\Adobe\InDesign Server\Version 7.5\en_US\ but it just doesn't register the configuration name in the Running Objects Table so our application cannot use it.
If we manually started InDesignServer.exe from command line using: InDesignServer.exe -configuration test, our application can connect to it. If we start it manually using command line, the configuration name is registered in the Running Objects Table.
How can we fix this so the service starts InDesignServer.exe and registers the configuration name in the running objects table?
The code we use to connect to the InDesignServer is the same one in the adobe documentation:
string instanceName = "configuration_noport";
dynamic app = (System.Runtime.InteropServices.Marshal.BindToMoniker(instanceName));
It only works if we start it manually from command line....it does not work if we let the service start it.

Now try to execute the compile class from the command line; let us say the class is inside c:\tmp now make a directory inside the tmp and called it lib
copy the jar file which contains MYSQL driver into lib
on the command line on the current directory ( c:\tmp) type
java -cp ./lib/mysql-connector.jar ConnectTest
The PATH env. variable has nothing to do with the jar file on the classpath; the path allows you to execute program from any command line directory if the program is on the path
CLASSPATH. Specifying where to search for additional libraries in Windows is easily done by seeting the environment variable CLASSPATH, which Java uses to see where it should find Java programs and libraries but never seen any success with it. So the best thing is to explicityl mention it on the command line ( jar dependecies)
Regards,
Alan Mehio
Lodon,UK

InDesign Server CC Mac problem licensing

Hi all.
I'm trying to activate InDesign Server CC but I am having a lot of problems.
- MacOSX 1.8.5 Server.
- Adobeindesignserver 9.2 Debug 1_23
First of all, the package contains just a folder, not an installer.
So I suppose all I have to do is copy the content in the Applications folder.
In the folder I found tree different executable files:
InDesignServer.app
InDesignServer.command
indesignserverconsole.command
I tried to activate InDesign with all the methods listed here:
http://helpx.adobe.com/it/indesign/release-note/indesign-server-cc-release-notes.html#Requ isiti%20minimi%20di%20sistema
adobe_prtk --tool=StartTrial --leid=InDesignServer-CS7-Mac-GM
adobe_prtk --tool=Serialize --leid=InDesignServer-CS7-Mac-GM --serial=<MySerial> --adobeid=<MyID>
adobe_prtk --tool=Type1Exception --accept --serial=<MySerial>--responsecode=<MyResponseCode> --leid=InDesignServer-CS7-Mac-GM
All attempts ended with: Return Code = 0 but InDesign still do not start.
The error is always the same:
"Adobe InDesign Server is not properly licensed and will now quit"
On this server is installed also IDServer CS5, can it be a problem?
I hope someone can halp me.
thanks Ivan.

Hi Karoly
So far no answer.
The only way I found is to download a new installer from the official site and install it in a brand new system.
In a clean system and with a true installer, not just a folder all works fine.
Unfortunately it's just a workaround, not a real solution.

I cannot start the "SQL Server Reporting Services (SCE)" service

Attempts to run any of the Windows Computer Reports fail with an error:
Date: 10/29/2008 10:19:30 AM
Application: System Center Essentials
Application Version: 6.0.1251.0
Severity: Error
Message: Cannot initialize report.
Microsoft.Reporting.WinForms.ReportServerException: The Report Server Windows service 'ReportServer$SCE' is not running. The service must be running to use Report Server. (rsReportServerServiceUnavailable)
   at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo()
   at Microsoft.Reporting.WinForms.ServerReport.GetParameters()
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args)
My attempts to start the "SQL Server Reporting Services (SCE)" service fail with an error:
Could not start the SQL Server Reporting Service (SCE) service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
The application log in the event viewer has hundreds of instances of Event ID 107:
Event Type: Error
Event Source: Report Server (SCE)
Event Category: Management
Event ID: 107
Date:  10/29/2008
Time:  10:36:25 AM
User:  N/A
Computer: DC
Description:
Report Server (SCE) cannot connect to the report server database. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Please help.

Thanks for the link to the Reporting Services forum. I found the fix in this thread:
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3644545&SiteID=1
I had to create a registry key and reboot:
1.
Click Start, click Run, type regedit, and then click OK.
2.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
3.
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
a.
On the Edit menu, point to New, and then click DWORD Value.
b.
Type ServicesPipeTimeout, and then press ENTER.
4.
Right-click ServicesPipeTimeout, and then click Modify.
5.
Click Decimal, type 60000, and then click OK.
This value represents the time in milliseconds before a service times out.
6.
Restart the computer.
After the reboot, the service was running. Thanks for your help with this.

Cannot start Trial for InDesignServer

Hi!
This problem drives me nuts.
I have installed a fresh new version of Microsoft Server 2012.
I download the latest version of InDesign-Server for Windows.
I install Adobe Application Manager Enterprise Edition 3.1.
I use booth adobe_prtk.exe from the AAMEE and from the Adobe Provisioning Toolkit Enterprise Edition with
adobe_prtk.exe --tool=StartTrial --leid=InDesignServer-CS6-Win-GM
I get this result
StartTrial Successful
Return Code = 0
But if i try to start InDesignServer, the console prompts
Adobe InDesign Server is not properly licensed and will now quit. (On my machine the german translation of this error).
What I'm doing wrong?
The strange thing is... If I call
adobe_prtk.exe --tool=StartTrial --leid=FooBarFooBarFoo
the tool says also
StartTrial Successful
Return Code = 0

I have reinstalled the Microsoft 2012 Server and a 2008 R2. I have disabled security settings like User Account Control, internet settings and so on.
adobe_prtk.exe gave me on booth machines Return Code 6 what means "Product whose LEID is entered is not installed on the target computer. "
Although the InDesignServer was installed...
But the solutions was quite simple for me:
If you look in the adobe_prtk logfile (%temp%/oobelib.log or /tmp/oobelib.log) you can see some entrys from a LEID called InDesignServer-CS7-Win-GM.
And that's it.

Why i cannot start sun application server

I am a new learner to Sun Microsystem's application server.
I can start the default server yestday, but cannot do it today. I didn't do anything, just switched off my pc last night without stop the default server first. Did me destoried anything? I don't wish the server is so fragile.
and it gives the message: CLI156 could not start the domin domin1, check the server log
anyone knows how to slove it?
thx

Urm.... i did not do any good thing to it. but it worked again. seems it got temper sometimes

Cannot start WebLogic Managed Server

Hi,
I have an weblogic domain on a physical machine with two servers (AdminServer and osb_server1 [Managed Server]). (Weblogic 10.3.6)
I started nodeManager and enrolled the domain using nmEnroll command through WLST.
I can start "AdminServer" thourgh nmStart('AdminServer') command. AdminServer starts successfully.
However, when I want to start managed server (osb_server1):
1. Through WebLogic administrator console it says:
(Warning) The user is not authorized to perform lifecycle operations on server osb_server1.
(Warning) All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed.
2. Using startManagedWebLogic.cmd script after entering username/password, it returns authentication denied.
Oct 22, 2012 10:31:21 AM EEST> <Critical> <Security> <BEA-090403> <Authentication for user weblogic denied>
<Oct 22, 2012 10:31:21 AM EEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user weblogic denied.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:966)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User weblogic weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
3. Using nmStart command on nodeManager, it is complaining about boot.properties file.
I can login AdminServer with same account without problems.
Best Regards,
Edited by: ToRRaDo on Oct 22, 2012 5:25 PM

Copied boot.properties from AdminServer to osb_server1 and the error below occured. (I also with plain text passwords in boot.properties file but error did not change)
<Oct 23, 2012 8:03:59 AM EEST> <Error> <Configuration Management> <BEA-150021> <The admin server failed to authenticate the identity of the user weblogic starting the managed server. The reason for the error is .>
<Oct 23, 2012 8:03:59 AM EEST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001/.>
<Oct 23, 2012 8:03:59 AM EEST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Oct 23, 2012 8:03:59 AM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Oct 23, 2012 8:03:59 AM EEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Oct 23, 2012 8:04:00 AM EEST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\my_domain\servers\osb_server1\logs\osb_server1.log is opened. All server side log events will be written to this file.>
<Oct 23, 2012 8:04:19 AM EEST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 23, 2012 8:04:19 AM EEST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid;
The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Oct 23, 2012 8:04:20 AM EEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password fromthe boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created.
Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:960)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User weblogic weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090295]caught unexpected exception
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace>
<Oct 23, 2012 8:04:20 AM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
Edited by: ToRRaDo on Oct 23, 2012 8:13 AM
Edited by: ToRRaDo on Oct 23, 2012 8:14 AM

Cannot start Weblogic Admin Server

When we start weblogic Admin server, we got the following message.
# A fatal error has been detected by the Java Runtime Environment:
# SIGBUS (0x7) at pc=0x000000373368316b, pid=348, tid=139846128580352
# JRE version: 6.0_20-b20
# Java VM: OpenJDK 64-Bit Server VM (19.0-b09 mixed mode linux-amd64 compressed oops)
# Derivative: IcedTea6 1.9.7
# Distribution: Red Hat Enterprise Linux Server release 6.0 (Santiago), package rhel-1.39.1.9.7.el6-x86_64
# Problematic frame:
# C [libc.so.6+0x8316b]
# If you would like to submit a bug report, please include
# instructions how to reproduce the bug and visit:
# http://icedtea.classpath.org/bugzilla
--------------- T H R E A D ---------------
Current thread is native thread
siginfo:si_signo=SIGBUS: si_errno=0, si_code=2 (BUS_ADRERR), si_addr=0x00007f3077b08000
Registers:
RAX=0x00007f3077b08000, RBX=0x00007f3077b08000, RCX=0x0000000000000000, RDX=0x0000000000000000
RSP=0x00007f3076d12a68, RBP=0x00007f3076d12b80, RSI=0x0000000000000000, RDI=0x00007f3077b08000
R8 =0x0000000000007f80, R9 =0x0000000000200000, R10=0x0000000000000000, R11=0x0000003733682c6a
R12=0x0000000000008000, R13=0x0000000000000003, R14=0x00007f3076d136a8, R15=0x00007f3076d12ab0
RIP=0x000000373368316b, EFL=0x0000000000010206, CSGSFS=0x0000000000000033, ERR=0x0000000000000006
TRAPNO=0x000000000000000e
Register to memory mapping:
RAX=0x00007f3077b08000
Best Regards,

Two things you may want to try
1. It complains about libc.so.6+0x8316b. Check with your Linux administrator to see if they have recent version of libc.so file at the kernel and if not, upgrade and try to start admin server (Make sure you remove the cache, tmp folders under server folder)
2. check your /etc/hosts and see if anything strange like duplicate host file, ip mismatch etc
Post your results after trying the above
Thanks
Lawrence Manickam
http://toyork.blogspot.ca

Cannot start oracle name server

When I try and start my name server service I get the following error in my listener.log file:
TNS-12502: TNS:listener received no CONNECT_DATA from client
The name server will not start and if I try and execute the Names.exe I get the error:
NNL-00018: warning: could not contact default name server
Any ideas?
Tim

Did you configure your name Server ? with namesctl utility
oracle@spirit:~/OraHome1/dbs> namesctl
Oracle Names Control for Linux: Version 8.1.7.0.0 - Production on 31-OCT-2003 13:04:14
(c) Copyright 1997 Oracle Corporation. All rights reserved.
NNL-00024: warning: no preferred name servers in SQLNET.ORA
NNL-00018: warning: could not contact default name server
Welcome to NAMESCTL, type "help" for information.
NAMESCTL>
Joel P�rez

Cannot start 9iAS http server - may be related to ojsp.conf missing.

Hi,
I have been able to start the ias apache http server before, and now couldn't do it anymore. I tried to do it in the DOS prompt and found that it is trying to open a file:
c:\oracle\iashome\apache\jsp\conf\ojsp.conf
I don't see the ojsp.conf file in the directory and didn't know whether it was there before.
I also look at the oracle_apache.conf file, and it does has an include file directive as:
include "C:\ORACLE\iashome\Apache\jsp\conf\ojsp.conf"
So can someone tell me that it is necessary to have the ojsp.conf under the \apache\jsp\conf directory?
And if so, what is the content of the ojsp.conf file looks like.
I have 9iAS 1.0.2.2 installed on win2000. It was working fine and now I couldn't start the http server.
Thanks;
Kelly.

Kelly,
Here is the contents of my ojsp.conf file:
# Set aliases for Oracle JSP
Alias /jspdocs/ "C:\ORACLE\iSuites\jsp\doc/"
# Associate OJSP extension with OJSP class to be called
ApJServAction .jsp /servlets/oracle.jsp.JspServlet
ApJServAction .sqljsp /servlets/oracle.jsp.JspServlet
It is in the ../Apache/jsp/conf folder and is titled ojsp.conf.
I'm running 1.0.2.2.a on Win2k.
Hope this helps.
Dennis

OCS 10.1.2 on Win2003 - mail application cannot start after rebooting serve

Hi
We have installed OCS 10.1.2 on Win2003 (single box) and the mail appln was running OK after the installation. On rebooting the server, we found some components that were not started (eg Internet directory for Infra) which we started manually via EM.
The Mail application however cannot be started giving the error message for all the mail components:
- failed to start a managed process after the maximum retry limit
We tried to start it manually using
- oesctl startup midtierhost:um_system:xxx
and even got the message:
- All processes already started for midtierhost:um_system:xxx
However, in EM, or when doing a
- oesctl show status midtierhost:um_system:xxx, we get the error message:
- midtierhost:um_system:nntp_in:116107583446856959 <no response>
Any idea of where we can check to see what's going wrong? I'm not sure of where to check the logs for possible errors.
Thanks for your assistance

Glad I could be of help - maybe you could help me out too, please? I have the following problem: when I create an appointment with Calendar, and add some participants to it (with email notifications option checked), at first everything seems to go the right way.
But if I delete the appointment/meeting, the following happens:
- the notifications regarding the delete of the meeting are not sent
- the whole mail system seems to hang, and I am not able to send emails anymore
Do you have the same behaviour on your installation? It would be useful to me just to know if other people are having this trouble....
Thank you!

Cannot start trial InDesign Server CC Mac

Similar Messages

Maybe you are looking for