Cannot start VM - IDE Emulator Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.'

HI all.
New install of 2008R2 on HP DL-380 G6. I have created (several) VM's none of which will start. If I remove the IDE Hard Disk and add a DVD of the OS ISO, it will boot and start the install (although with no HDD).
It seems like the IDE controller is working ok - it is what the DVD drive is using, but it cannot mount a VHD. The error indicates a driver is not working (although the DVD on IDE works fine) so something to do with VHD? I can attach the VHD
in disk management, so it does not seem corrupt - again I have tried with both dynamic and fixed VHDs.
Full error is:
'Test1' failed to start. (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1' Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1': Failed to open attachment 'C:\Users\Public\Documents\Hyper-V\Virtual hard disks\New Virtual Hard Disk.vhd'. Error: 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
Any Ideas?

Hi ,
Did you try to disable the services , if they are exsit :
HP Smart Array SAS/SATAEvent notification
HP Insight storage agents
Then restart your server .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

The service can't be started either because it is disabled or because it has no enabled devices associated with it

The question is correct as stated on my windows desktop. Can't uninstall program or replace with new. It also states I don't have admin right to uninstall. Although when I try to open Fox fire it states Fox fire already running but not responding. the old foxfire process must be closed to open new window so I close it and then get the message. Your foxfire cannot be loaded either its profile is missing or inaccessible. I can't add image or get Trouble shooting results

You can try to delete the parent.lock file in the Firefox profile folder.
*%AppData%\Mozilla\Firefox\Profiles\<profile>\
The "AppData" folder in Windows Vista and later Window 7+ versions and the "Application Data" folder in XP/Win2K are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
See also:
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use

Windows.Launch contract failed with error: The app didn't start..

We have installed windows 8 Prof X64 Edition; none of the Metro apps are not getting launched; the system is added in domain, the event viewer has the below information for one of the app.
Event Under: Applications
App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat did not launch within its allotted time.
Event Under: AppHost
The App Host has encountered an unexpected error and will terminate. The error is 0x8007000E.
Event Under: Microsoft-Windows-TWinUI/Operational
Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Chat for the Windows.Launch contract failed with error: The app didn't start..
Regards Ajinkya Ghare MCITP-Server Administrator | MCTS

Hi,
Try to put a machine disjoin the domain to see if the same issue occurs.
Sometimes the Windows 8 machines cannot use metro app once join the domain, you can try this method:
1- Open "Local Group Policy Editor"
2-Navigate to "Computer Configuration - Administrative Templates - Network Isolation"
3- Open "Internet Proxy Servers for Metro Style Apps" and set the value to your proxy server address like 172.16.0.1:8080.
Regards,
Leo
Huang
Leo Huang
TechNet Community Support

PCMCIA Wlan card is not detected: Error 1058: service cannot be started

PLEASE HELP!
I am running WXP Pro for over 2 years and I have been connecting to the internet via a wireless pc card in my laptops PCMCIA slot with no problems. Suddenly last week it started to randomly disconnect and reconnect, and now it has gone off completely.
I bought a new WiFi card and still didn't work. I have checked the device manager and the PCMCIA cardbus driver is working fine as is every other device. The wireless card driver and some other network related drivers fail to start no matter what I try and how many times I try. I have tried another laptop and both my old card and the new one work fine.
All the device driver that I try to start have the error
"Error 1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."
The card driver is installed, just not starting, it's like the laptop cannot detect or see the card in the slot
Please help; I am having trouble finding anyone with the same problem after a week of searching the web.

Hi
This behavior can occur if the service is disabled or if the service is disabled for the hardware profile that you are currently using.
To enable the service do this:
1. Click Start, point to Programs, point to Administrative Tools, and then click Services.
2. Double-click the service that did not start.
3. Click the Log On tab.
4. Verify that the service has not been disabled for the hardware profile that you are using. If it has, click Enable.
5. Click the General tab. Verify that the service has not been disabled in the Startup Type box. If it has, click Automatic to have it start when you start the computer.
This was described here in the MS knowledge base article
http://support.microsoft.com/kb/241584

Server 2012 R2 - Complete WSUS Installation Issue - The service cannot be started...

Hi all,
installed SCCM 2012 R2 CAS on a 2012 server. The SQL is off box on a server cluster. I've installed WSUS through the 'Add Roles and Features'. I configured it to have local storage for the content and a remote DB instance (called SQL1 on our cluster). All this
worked well and the install completed as expected. I checked the SQL cluster and the "SUSDB" database was created ok.
As a final step, i went to Tools in Server Manager and launched Windows Server Update Services. This brought up the 'Complete WSUS Installation' dialogue box. I entered the exact same DB info as i had done when completing the initial install of WSUS:
Yet when i hit 'run' the following message returns:
The relevant bit of logging is shown here:
2015-01-14 16:58:42 Starting service W3SVC
2015-01-14 16:58:42 Configuring IIS...
2015-01-14 16:58:42 Start: ConfigureWebsite
2015-01-14 16:58:42 System.Runtime.InteropServices.COMException (0x80070422): The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
Since i'm pretty sure i need WSUS working correctly to use it for SCCM, can anyone suggest what my problem is here? I'd assume it's falling down because the 'ConfigureWebsite' job can't start but what service does that need to run?
Really stumpoed by this so any help would be much appreciated! Thanks

2015-01-14 16:58:42 Start: ConfigureWebsite
Did you install the Web Server role before installing the WSUS Server role? Is the Web Server role already installed? If so, is it installed and configured in a compatible manner with the WSUS role?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Nothing will work in my Vista 64bit! "The service cannot be started, either because..."

Hello,my windows Vista will not run anything, no antivirus', no system restore no administrative tools. I'm getting the message,"The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."... No system recovery at boot-up, I press F11 at boot up and the only service that won't start at boot up is system recovery. Any programs that I try to run that will have interact with windows system status keeps showing the same message, "The service cannot be started, either because it is disabled or because it has no enabled devices associated with it." Thanks in advance for anybody who has a solution to this.

On a Microsoft Web site I found the following information. It says it is for Win 7, but it might help you trouble shoot and maybe find out what is going on in your Windows Vista.
Good luck, GeorgeFN
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/the-service-cannot-be-started-ei...
GeorgeFN
I work on behalf of HP.

The service cannot be found for the endpoint reference (EPR) 127.0.0.1/a

Hi All:
I need help!!!
I am using axis2-1.5.1, jdk 1.6, eclipse 3.5, and Axis2_Codegen_Wizard_1.3.0 and windows xp.
I used Axis2_Codegen_Wizard_1.3.0 to generate the client stub and proxy.
I get the following error when I tried to call the web service:
package com.ttdev.ss.client;
import java.rmi.RemoteException;
import com.ttdev.ss.client.SimpleServiceStub.ConcatRequest;
import com.ttdev.ss.client.SimpleServiceStub.ConcatResponse;
public class SimpleClient
     public static void main(String[] args) throws RemoteException
          try
          SimpleServiceStub service = new SimpleServiceStub();
          ConcatRequest request = new ConcatRequest();
          request.setS1("abc");
          request.setS2("123");
          ConcatResponse response = service.concat(request);
          System.out.println(response.getConcatResponse());
          catch(Exception e)
               System.out.println("e.getMessage():"+e.getMessage());
Here is my SimpleService.wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="SimpleService" targetNamespace="http://ttdev.com/ss" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://ttdev.com/ss" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<wsdl:types>
<xsd:schema targetNamespace="http://ttdev.com/ss">
<xsd:element name="concatRequest">
<xsd:complexType>
<xsd:sequence>
     <xsd:element name="s1" type="xsd:string"/>
     <xsd:element name="s2" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="concatResponse" type="xsd:string">
</xsd:element>
</xsd:schema>
</wsdl:types>
<wsdl:message name="concatResponse">
<wsdl:part name="parameters" element="tns:concatResponse">
</wsdl:part>
</wsdl:message>
<wsdl:message name="concatRequest">
<wsdl:part name="parameters" element="tns:concatRequest">
</wsdl:part>
</wsdl:message>
<wsdl:portType name="SimpleService">
<wsdl:operation name="concat">
<wsdl:input message="tns:concatRequest">
</wsdl:input>
<wsdl:output message="tns:concatResponse">
</wsdl:output>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SimpleServiceSOAP" type="tns:SimpleService">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="concat">
<soap:operation soapAction="http://ttdev.com/ss/NewOperation"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SimpleService">
<wsdl:port name="SimpleServiceSOAP" binding="tns:SimpleServiceSOAP">
<soap:address location="http://localhost:8080/axis2/services/"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
In the dos-prompt, I get the following error message:
[INFO] Listening on port 8080
[ERROR] The service cannot be found for the endpoint reference (EPR) 127.0.0.1/a
xis2/services/
org.apache.axis2.AxisFault: The service cannot be found for the endpoint referen
ce (EPR) 127.0.0.1/axis2/services/
at org.apache.axis2.engine.DispatchPhase.checkPostConditions(DispatchPha
se.java:65)
at org.apache.axis2.engine.Phase.invoke(Phase.java:334)
at org.apache.axis2.engine.AxisEngine.invoke(AxisEngine.java:251)
at org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:160)
at org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostReq
uest(HTTPTransportUtils.java:167)
at org.apache.axis2.transport.http.HTTPWorker.service(HTTPWorker.java:26
6)
at org.apache.axis2.transport.http.server.AxisHttpService.doService(Axis
HttpService.java:281)
at org.apache.axis2.transport.http.server.AxisHttpService.handleRequest(
AxisHttpService.java:187)
at org.apache.axis2.transport.http.server.HttpServiceProcessor.run(HttpS
erviceProcessor.java:82)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
utor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
.java:908)
at java.lang.Thread.run(Thread.java:619)
Thank you for your help!!!
Yours,
John.

I had the same issue and managed to fix it.
I am using tomcat and had a filter configured for AxisServlet to open a hibernate Session. Somehow (I did not figure it out yet) this filter afects the way the AxisServlet resolves the EPR.
My fix was - remove the filter. It worked. Now I am trying to figure out why.
If you have any clues, please drop a line.

Org.apache.axis2.AxisFault: The service cannot be found for the endpoint

Hi Team,
I'm getting following error while runnig WebServices
[ERROR] The service cannot be found for the endpoint reference (EPR) /TestServices/services
org.apache.axis2.AxisFault: The service cannot be found for the endpoint reference (EPR) /TestServices/services
Please guide me where i went wrong
Thanks in Advance
Ravi

I am also facing the same problem. can any body help us?
Thanks
jaya

Start-Process : This command cannot be run due to the error: The system cannot find the file specified.

Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
Dimitri

Hi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Error :The user cannot be enabled because the end date is passed.

Hi
While running eBusiness HRMS Terminated Reconciliation, OIM picks the Users End Date and if that End Date is passed, the user is Disabled. I think the connector should behave this way. Pls correct me if I am wrong.
But, what's happening is, when I run the eBusiness HRMS Terminated Reconciliation, I am getting the below error and in the recon manager I can see the End Date as earlier date but the user is still Active. It is not changing to Disabled.
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcUSR/validateProvDates Error :The user cannot be enabled because the end date is passed.
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcDataObj/save Error :Data Update Failed
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.DATABASE - Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
     at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.modifyUserStatus(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.linkToUser(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.applyActionRules(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.checkDataSorted(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.eventPostUpdate(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.databeansimpl.tcRCEBean.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl.reapplyRules(tcRCE_4tknfu_EOImpl.java:200)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcDataObj/save Error :Data Update Failed
ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.DATABASE - Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
java.lang.Exception: Rollback Executed From
     at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
     at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
     at com.thortech.xl.dataobj.tcRCE.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.databeansimpl.tcRCEBean.reapplyRules(Unknown Source)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl.reapplyRules(tcRCE_4tknfu_EOImpl.java:200)
     at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I dont know why OIM is trying to Enable User.
Pls Help
Edited by: AAG on 25 Jan, 2011 4:12 AM
Edited by: AAG on Feb 3, 2011 12:43 AM

I am getting the same error. Any idea which field OIM considers as signal of disabling the user? Status or Termination date?

What to do about Backup failed with error: The target volume is read-only

This is a weird story. My wife has a PowerBook G4/1.33 GHz that she uses in clamshell mode with a 20" Cinema Display. One day under OS X 10.5.6, her Time Machine backups (to a networked 500 GB Time Capsule) failed with the error: Backup failed with error: The target volume is read-only. So I upgraded her to 10.5.7 and erased the sparseimage file, starting a new Time Machine backup. And it just happened again. Any idea how this sort of problem arises? My wife was doing something at her computer when the Time Machine error occurred.
Please don't advise us to upgrade to 10.5.8, because her PowerBook freezes not infrequently with any OS later than 10.5.6, and I was just about to downgrade her from 10.5.7 to 10.5.6.

Pondini wrote:
odysseus wrote:
This is a weird story. My wife has a PowerBook G4/1.33 GHz that she uses in clamshell mode with a 20" Cinema Display. One day under OS X 10.5.6, her Time Machine backups (to a networked 500 GB Time Capsule) failed with the error: Backup failed with error: The target volume is read-only. So I upgraded her to 10.5.7 and erased the sparseimage file, starting a new Time Machine backup. And it just happened again.
Try repairing the sparse bundle, per #A5 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
I've tried this before, but it can't be repaired, because it can't be mounted.
Any idea how this sort of problem arises? My wife was doing something at her computer when the Time Machine error occurred.
One possibility is, the HD in the Time Capsule is beginning to fail (all HDs fail, sooner or later).
I'm backing up to my own sparseimage bundle just fine.
Please don't advise us to upgrade to 10.5.8, because her PowerBook freezes not infrequently with any OS later than 10.5.6, and I was just about to downgrade her from 10.5.7 to 10.5.6.
Those two things may be related. Whatever's going wrong may very well be what's corrupting the backups.
I'd recommend finding out what's wrong with the Powerbook. It's impossible to tell, of course, but that may be the root of the problem.
There's a problem with PowerBooks and Cinema Displays. I've posted a lot about this. Even after a motherboard replacement, my PowerBook G4/1.67 GHz had freezes, and eventually Apple gave me a MacBook Pro, but I think there's a failure involving hardware/software design.
If you haven't yet, I'd start by dong a +*Verify Disk+* on it's internal HD (also per #A5);
That checks out fine.
if there are no errors, or they're fixed and the problem continues, run the +Apple Hardware Test+ from the disc that came with the Mac. (One of the discs should have that, and instructions for running it, printed in tiny type on the label).
If still no help, I'd be inclined to do an +Archive & Install, preserving users & settings,+ of Leopard, then download & install the appropriate "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate (change the last "8" to the desired number). Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

Excel Services 2010 Error - "The workbook cannot be opened."

I enabled Excel Services and added a Excel Web Access viewer to my page. It's just a simple spreadsheet (which incidentally works fine on my standalone development server) that displays the error "The workbook cannot be opened." when the page loads. The trusted
file locations are set up appropriately. We are using Kerberos authentication.
My event viewer showed this "Critical" event (ID: 3760):
SQL Database 'Prod_WSS_Content' on SQL Server instance 'servername' not found. Additional error information from SQL Server is included below.
Cannot open database "Prod_WSS_Content" requested by the login. The login failed. Login failed for user 'domain\user'.
In other words, the service account that ECS was running under did not have permission to the content database. So I granted the user read permission on the database. Then I got the same error and this "Error" level event in the event viewer (ID: 5617):
There is a compatibility range mismatch between the Web server and database "Prod_WSS_Content", and connections to the data have been blocked to due to this incompatibility. This can happen when a content database has not been upgraded to be within the compatibility
range of the Web server, or if the database has been upgraded to a higher level than the web server. The Web server and the database must be upgraded to the same version and build level to return to compatibility range.
This error is typically associated with 2007 to 2010 upgrades apparently, but I did a fresh 2010 installation on a pristine machine. I found a very helpful post on the subject on the MSDN blogs:http://blogs.msdn.com/b/jjameson/archive/2010/05/04/the-workbook-cannot-be-opened-error-with-sharepoint-server-2010-and-tfs-2010.aspx
I gave the ECS service account db_owner permission on the content database. I'm still getting the error "The workbook cannot be opened." I ran the PowerShell commands listed at the bottom of the post, and no change.
What's interesting now, is that nothing at all is showing up in the event
viewer. I wonder if it is because of the statement in the event log that says "connections to the data have been blocked due to this incompatibility." Is there something on the SharePoint server blocking the connection to SQL Server that needs to be reset?
Rob Wilson - MCT. MCTS, MCITP SharePoint. http://sharepointblog.kellerschroeder.com http://www.therobman.com/blog

Hi Rob Wilson,
I suggest you to check the following things at first:
1.
What’s the version of the excel file? Excel 2003, Excel 2007 or Excel 2010? Excel Service doesn’t support Excel 2003 and easier version;
2.
Are there some features the Excel Service do not support?
More information about the Supported and Unsupported Features
http://msdn.microsoft.com/en-us/library/ff595319.aspx
3.
If the excel is connected to SQL, did you save the connect file to the Data Connection Library?
Shared your views.

[Forum FAQ] Cannot perform a backup schedule via Windows Server Backup and receive "The system cannot find the path specified." Error

Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

good

Hi, I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer".

Hi, I hope some one can help as I updated my version of iTunes and now get the error "The program can't start because MSVCR80.dll is missing from your computer". I understand that I need to delete and reinstall iTunes but all of my music has been uploaded from CD's and I'd like to know if these are safe if I delete iTunes of if they too will be deleted. I have over 1300 songs so this is a big question for me. Many thanks.

Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5

I get an Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5 using Windows 7. This just started happening after upgrading to MS 2013 suite and also installed Adobe Reader at that same time.
I had problems in the past when Reader was installed with Acrobat, so I uninstalled Reader, but the problem still seems to occur.
any help would be appreciated.

That link has backslashes (%5C) that need to be changed to forward slashes:
*http://supportdocs.sonybiz.net/indexes/pi/LFS/May_2004/00035186.pdf

Cannot start VM - IDE Emulator Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.'

Similar Messages

Maybe you are looking for