Cannot start Xserver after installing Solaris 10 08/07 for Sparc

Hi,
Has anyone ecountered the following promblem after installing Solaris 10 08/07 for a Sparc processor .I am trying to exceed to the server but cannot get access to CDE or Gnome as the Xserver is not running!
getting the following message on booting not sure if related.
SUNW-MSG-ID: SUNOS-8000-1L, TYPE: Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Thu Nov 8 10:07:20 CET 2007
PLATFORM: SUNW,Netra-T2000, CSN: -, HOSTNAME:
SOURCE: eft, REV: 1.16
EVENT-ID: e627d1f9-bd6e-c850-dd0e-a5dbfaa64e48
DESC: The EFT Diagnosis Engine encountered telemetry for which it is unable to p
roduce a diagnosis. Refer to http://sun.com/msg/SUNOS-8000-1L for more informat
ion.
AUTO-RESPONSE: Error reports from the component will be logged for examination b
y Sun.
IMPACT: Automated diagnosis and response for these events will not occur.
REC-ACTION: Run pkgchk -n SUNWfmd to ensure that fault management software is in
stalled properly. Contact Sun for support.
I Have ran this pkgchk -n SUNWfmd and there is no response
I have tried creating the xorg.conf file /usr/X11/bin/Xorgconfig as recommened form a similar thread but this has not worked.
I can telnet when I try to ssh it is asking me for interactive kb security check and can't login with root password...
which works when I telent!!
Has anyone ecountered this before??
Hendy

1-Which server are u using? Xorg or Xsun?
2-did you try /usr/X11/bin/xorgcfg ?
3-did you try kdmconfig ?

Similar Messages

Cannot Start Sqlplus after installing Oracle on linux

Hi All,
I tried installing oracle10g-10.1.0 on Fedora core 2.My installation was successful.But i'm not able to start sqlplus after my installation.I have made the necessary changes in the .bash_profile.Please do find the contents of the file and let me know what i need to do further for me to start both my sqlplus and isqlplus.when i go to the bin directory and execute sqlplus as oracle user i get the following error messages.
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory.
How can i solve this error.Your suggestions are greatly appreciated.The contents of my .bash_profile are as follows.Pls advice on the same.Thanks in advance.
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
umask 022
PATH=$PATH:$HOME/bin
unset USERNAME
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=$ORACLE_BASE/product/10.1.0/Db_1
export ORACLE_SID=orcl
export PATH=$PATH:$ORACLE_HOME/bin
export PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
#/u01/app/oracle/product/10.1.0/db_1/bin
#NLS_LANG=american_america.US7ASCII
#export NLS_LANG
#ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
#export ORA_NLS33
Thanks,
Rama

Hi Gasparotto,
Thanks for your time and for your suggestion in helping me out to find a solution to my problem.As per your request pls do find enclosed the contents of the command env in my /home/oracle directory.Pls advice me where i have done a mistake.Your inputs are greatly appreciated.Thanks once again.
SHELL=/bin/bash
TERM=xterm
HISTSIZE=1000
QTDIR=/usr/lib/qt-3.3
USER=oracle
LD_LIBRARY_PATH=/u01/app/oracle/product/10.1.0/Db_1/lib
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
ORACLE_SID=orcl
ORACLE_BASE=/u01/app/oracle
KDEDIR=/usr
MAIL=/var/spool/mail/oracle
PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/bin:/etc::/bin::/home/oracle/bin:/u01/app/oracle/product/10.1.0/Db_1/bin
INPUTRC=/etc/inputrc
PWD=/home/oracle
LANG=en_US.UTF-8
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SHLVL=1
HOME=/home/oracle
LOGNAME=oracle
LESSOPEN=|/usr/bin/lesspipe.sh %s
DISPLAY=:0.0
ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
G_BROKEN_FILENAMES=1
XAUTHORITY=/home/oracle/.xauthzZ1FKa
_=/bin/env
Thanks,
Rama

Cannot start EM after installing 12g

Hello:
I successfully installed 12g and created my first database. But when I try launching the em with the url, https://FSG-vvenk:5500/em, I get a "This page cannot be displayed".
Also I do not see a Service labeled "EM" and hence not sure if the service has been started.
Venki

I am not sure that the command given by Sb would be useful in 12c as the EM express uses XDB . Try using the commands below and post feedback,
SQL> exec dbms_xdb_config.sethttpsport (5500);
SQL> exec dbms_xdb_config.sethttpsport (5500);
Confirm that the port is correctly configured using the following query
SQL> select dbms_xdb_config.gethttpsport () from dual;
DBMS_XDB_CONFIG.GETHTTPSPORT()
5500
After this try to use the EM Express again.
HTH
Aman....

Cannot start iTunes after installing Lion

I installed Lion Mac OSx, then I started iTunes.
It didn' work, an error message appeared asking me to check whether this version of iTunes works on this vesion of Mac OS. As well, the message asked me to get the latest iTunes and Mac OS update, which I did.
But the same message appears again.
I totally removed iTunes and re-installed it, but nothing new.
Please help.

you can't install XP on new 2011 Macs.
Boot Camp 4.0 doesn't include drivers, that does not mean you can't install XP.
Boot Camp 4 Lion Installation & Setup Guide (PDF)
While Boot Camp 4.0 will run in eitherSnow Leopard or Lion, it is a requirement for setting up new Windows installations in Lion even though existing Boot Camp 3 installations will continue to work in Lion if you upgrade your systems. What this means is that if you have an existing Windows XP or Vista installation when you upgrade to Lion then Boot Camp will still work, but you will not be able to upgrade it to version 4 or later.
Boot Camp 4 requires Windows 7 or later | MacFixIt - CNET Reviews
You don't NEED new 4.0 drivers, that is settled.
There is one sentence in the above article that needs to be confirmed, I highly doubt the accuracy:
if you decide to set up a dual-boot environment for Windows from a Lion installation then you will need to have Windows 7 or later, as your older XP or Vista discs will not work.
The only way Lion can allow XP to boot if it was there before, but not allow installing, would have to be the GPT partition.
Block = prevent = "cannot install" IS a form of blocking and preventing.
So Apple does block.
OP:
My iMac (27-inch, Late 2009) or iMac (21.5-inch, Mid 2010) displays a black screen during installation of Microsoft Windows 7 using the Boot Camp Assistant. How do I fix it?
The Windows 7 installer does not include required graphics or Bluetooth drivers for this computer. To obtain the necessary drivers and resolve the issue, see this article.
https://support.apple.com/kb/HT3986

Ipad Mini cannot start up after install iOS 8.1.2

Hi All,my Ipad Mini after upgraded from iOS 8 to iOS 8.1.2 couldn't start up,it only show the Apple logo and goes off after!
Can anyone here advice me please.
Thanks

Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
Be aware that in some cases, the device may enter recovery mode after a glitched update (if that's what happened).

No start-up after installing 10.2

Hello All:
I cannot get my iMac to start up after installing OS 10.2
This - one of the last iMac CRT's - is my old computer which I have erased so I may give it to my niece for Christmas. The machine was running OS 10.2; it has 256MB, a 40 gig HD; it is a graphite slot-loader with a 600mhz processor (I believe).
Once I erased it, I began loading new software: it would take up to 10.0.4 and run, but once I installed 10.2 (from a disk I bought from Apple - white background, blue X) I would get a message to reboot in many languages after the gray screen. A few times I got code during start-up and the machine would freeze.
I ran the firmware updater and installed OS 9.2 thinking that would help. I reset PRAM. I reinstalled 10.0 from different disks I had - the ones which ship with the computer. I ran software updater. Nothing works.
The only thing I thought of doing was getting a copy of OS 10.1 to install after 10.0, but before 10.2. Does this make a diffrence? Can I just jump to OS 10.2? Why didn't the machine ask for the second disk when installing 10.2? Did I do something wrong when I erased the disk? What do I do next?
Thanks in advance for your help,
Rob
iMac Mac OS X (10.4.3)

Hi Rob, and welcome to the discussions.
The multi-lingual message to restart is called a kernel panic. This can be caused by software (third-party extensions or drivers) or hardware.
You said the machine was running 10.2 before you erased it to configure for your neice. If so, then your firmware was already up-to-date. Did you change anything on the iMac? New hard drive, new RAM, non-apple keyboard or mouse?
Prior to installing 10.2, you installed 10.0.4 (this isn't necessary, by the way; as long as the firmware is up-to-date, you can erase the hard drive and go straight to 10.2). Did you install any other software? When you installed 10.2, did you did an archive and install, or an upgrade?
I'd suggest starting fresh:
Step 1: Unplug all peripherals (except keyboard and mouse) and boot from your 10.2 install disk, then launch Disk Utility from the Install menu at the top of the screen;
Step 2: Erase the hard drive, and install the OS9 drivers (look for a check-box in the erase window);
Step 3: Have Disk Utility repair the disk (if it fixes any errors, keep running it until it finds no errors);
Step 4: Quit Disk Utility, and continue with the Installer.
Good luck!
Andrew

IPhoto cannot export video after installing Yosemite, HELP. It happens to my 2 MacBook Pros, 2 Airs and iMac.

iPhoto cannot export video after installing Yosemite.

You have a problem and yo need to solve it
If you want help you need to do more than state an abstract problem - we need details - what can't it? what makes you thing it can't? what errors occur? what are the symptoms?
Your post is like "my car won't start" - with no details it could be anything from having lost the key to gas - you have to provie details
LN

Photoshop Elements 13, Premiere Elements 13 & Organizer. Cannot open apps after installing ??

Photoshop Elements 13 & Premiere Elements & Organizer. Cannot open apps after installing ?? I have downloaded and installed bot Photoshop lements 13, Premiere Elements 13 and Organizer. Cannot open apps from Welcome screen or Start menu? Progress bar scrolls, but apps never open. Need help. Thank you. (running on Windows 7 64-bit).

Hi,
Please try opening .exes directly from their installed location < Right Click the exes > Run As Administrator >
Organizer:
C:\Program Files\Adobe\Elements 13 Organizer\PhotoshopElementsOrganizer.exe
PSE13 Editor:
C:\Program Files\Adobe\Photoshop Elements 13\PhotoshopElementsEditor.exe
PRE13:
C:\Program Files\Adobe\Adobe Premiere Elements 13\Adobe Premiere Elements.exe
Thanks,
Anwesha

HT1926 We cannot open itunes after installing it. The licensing agreement comes up and we agree but then nothing happens. Each time we click on the itunes icon, the agreement comes up. We cannot get to itunes at all. I have followed some of the suggestion

We cannot open iTunes after installing it. When we click on the icon the licensing agreement comes up and we click Agree but then nothing happens. Each time we click the icon the agreement comes up. We've tried uninstalling and reinstalling but we have the exact same problem.

Refer to steps to remove SC files here:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / PROGRAMS N FEATURES / highlight QUICKTIME and click REPAIR.

Error In Starting Jboss after installing OIM server

Hi All,
I have Installed OIM_Server(OIM 9.1.0.1) ON Jboss server(4.2.3) , I have 1 GB RAM m/c so have JVM setting as -XMS512m -XMX768 m. While installation of OIM Server, it showed the success message. But When I am starting the server , to perform post installation check, it is showing following error message .
Does anybody have any ideas what the problem is? Please provide the possible solution.
Thanks to All :)
Error :
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Unable to retrieve orbjavax.management.InstanceNotFoundException: jboss:service=CorbaORB is not registered.
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Linked java:comp/UserTransaction to JNDI name: UserTransaction
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] addEnvEntries
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkResourceEnvRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkResourceRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkMessageDestinationRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkEjbRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkEjbLocalRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkServiceRefs
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] linkSecurityDomain
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] No security-domain given, using default: java:/jaas/other
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Linking security/securityMgr to JNDI name: java:/jaas/other
2009-07-16 18:43:27,166 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] AbstractWebContainer.parseWebAppDescriptors, End
2009-07-16 18:43:27,401 DEBUG [org.jboss.web.tomcat.service.TomcatDeployer] Using session cookies default setting
2009-07-16 18:44:02,667 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:44:04,964 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:44:04,964 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750044964, maxLifeAfterPassivation=1200000
2009-07-16 18:45:11,465 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSchedulerThread"
2009-07-16 18:45:11,465 ERROR [STDERR] java.lang.NoClassDefFoundError: org/quartz/core/JobRunShell
2009-07-16 18:45:11,465 ERROR [STDERR]      at org.quartz.impl.StdJobRunShellFactory.borrowJobRunShell(StdJobRunShellFactory.java:86)
2009-07-16 18:45:11,465 ERROR [STDERR]      at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:352)
2009-07-16 18:45:11,465 ERROR [STDERR] Caused by: java.lang.ClassNotFoundException: Unexpected error during load of: org.quartz.core.JobRunShell, msg=PermGen space
2009-07-16 18:45:11,465 ERROR [STDERR]      at org.jboss.mx.loading.RepositoryClassLoader.loadClassImpl(RepositoryClassLoader.java:560)
2009-07-16 18:45:11,481 ERROR [STDERR]      at org.jboss.mx.loading.RepositoryClassLoader.loadClass(RepositoryClassLoader.java:415)
2009-07-16 18:45:11,481 ERROR [STDERR]      at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
2009-07-16 18:45:11,481 ERROR [STDERR]      at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
2009-07-16 18:45:11,481 ERROR [STDERR]      ... 2 more
2009-07-16 18:45:11,481 ERROR [STDERR] Caused by: java.lang.OutOfMemoryError: PermGen space
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750126168, maxLifeAfterPassivation=1200000
2009-07-16 18:45:26,168 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] Running RemoverTask
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, PassivatedCount=0
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.AbstractInstanceCache] removePassivated, now=1247750133247, maxLifeAfterPassivation=1200000
2009-07-16 18:45:33,247 DEBUG [org.jboss.ejb.plugins.LRUEnterpriseContextCachePolicy] RemoverTask, done

I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"

Strange problems after installing Solaris 10 u6 on 64-bit PC

Hi all,
I have run into some very strange issues after installing Solaris 10 update 6 on my 64-bit PC (it's almost new). The problems are with graphical applications and desktop environments based on GTK (so it seems, at least).
I have installed Solaris normally, following most of the default options and choosing the "Entire Group" software packages installation. However, after the first login I've seen that:
1. No user creation process was offered to me and I had to login as root (I find it pretty strange)
2. After logging in as root into JDK system, my screen went blank for a couple of seconds and then the system threw me back to the login screen.
3. Logging into the old CDE environment was possible, but launching Firefox from there (using a command line terminal) wasn't. It gave me the following error message:
ld.so.1: firefox-bin: fatal: libmlib.so.2: open failed: no such file or directory
ld.so.1: firefox-bin: fatal: relocation error: file /usr/bin/firefox/firefox-bin: symbol gtk_init: referenced symbol not found.
It's very strange because GTK toolkit and JDK environment are supposed to be the core functionalities provided by Solaris. Does anyone have an idea what's going on?
My system sum-up:
CPU: Intel Core 2 Quand Q6600 @ 2.4 GHz
RAM: 2 Gb of DDR2 SDRAM
Motherboard: MSI MS-7529 (Intel G31 chipset)
Monitor: AOC LM725
Graphics card: NVIDIA GeForce 9400 GT
Hard disk: 2 Western Digital HDs (SATA) 320 Gb each,
1 Western Digital external USB HD MyBook Essential 2, 500 Gb
DVD drives: 2 LG DVD drives (SATA)
Network card: Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
I use my system in the following way:
On the first hard disk, I have a one-partition 32-bit Windows XP SP3 installation (ported from my old computer).
On the second hard disk, I have a functioning Fedora Core 9 installed on the first half of the disk's space (the installation is self-organized into several Linux partitions, e. g. /boot, /swap etc; I am a newbie so I don't know too much about Linux partitioning - only specified to Fedora how much space it could use for its volume group). I installed Solaris onto the second half of the second disk.
It has be noted that my USB external drive seemed to conflict with the network or graphics cards during the Fedora installation and caused it to hang sporadically, so I installed Fedora with this disk detached. I also detached it when I was installing Solaris, though it seems to have not influenced the problems I experienced. I also have attempted installing Solaris before I did so with Fedora, but had the same issues.

Well, it seems that the cause of the problem was that my DVD image was just corrupted - I didn't check it vs MD5 codes supplied by Sun assuming it went automatically OK. I downloaded the image again (this time it was OK), reinstalled the system and successfully logged into JDS. However, I am still puzzled why Solaris doesn't offer to create a default non-root user during the installation process.

Errors starting JBoss after installing OIM

I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me how to resolve.
increasing the memory did not help.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"

I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"

Cannot open iTunes after installing Lion.Says it is trying to restore windows and quit unexpectedly

Cannot open itunes after installing Lion. Says trying to restore windows and then quits

same
Message was edited by: Ben123212321

Out Of Frequency problem -- After Installing solaris 10 x86

Hi Solarians,
After installing solaris 10, I am getting "*Out Of Frequency*" problem and I am not able to login to Desktop session. Please let me know configuration changes that i need to make along with exact paths as i am new to solaris.Currently i am running dual OS (XP and Solaris).
Out of Frequency
HF: 42.7 KHZ
VF: 40.0 HZ
Operating Frequency
HF: 30 - 71 KHZ
VF: 50 - 160 HZ
Please help me solve this problem, Thanks in advance .....
Thanks,
Mahesh

hi;
I faced that problem when I was a beginner on solaris as you were. I tried to install solaris to my windows installed x86 based PC. in my fisrst few attempts ý always saw that message, afterwards somehow I managed to install solaris to my PC but this time windows failed.I think that is because of the inconsistencies between those OS but if you need to install solaris you can use VM ware workstation with this software you can use both OS without problems.

Can't start Tomcat after installing Bea WorkShop for JSP

Hi,
I have been using Eclipse SDK Version: 3.1.2 Build id: M20060118-1600 and Web Tools Project 1.0.2 and Tomcat 5.0 and Tomcat 5.5 for about 2 months with no problems. But now I Can't start Tomcat after installing Bea WorkShop for JSP plug-in. I get "Server Tomcat v5.0 @ localhost failed to start". Any help would be greatly appreciated.

I installed BEA Workshop for JSP Version: 3.1.0
Build id: 536. I only wanted to install the plug-in to my existng Eclipse 3.1 / WTP application. The only option that I saw was to download the entire FullWorkshopFreeInstall-536.zip, which is 192,496 KB. During the installation, there is a screen that you can specify to only install the plug-in - and I selected that option. Today, I chose to uninstall the BEA Workshop for JSP and then I was again able to start Tomcat server. I then did a complete install of BEA Workshop for JSP into a totally separate location. My original Eclipse installation still works fine, but my Workshop for JSP Version (which is now a completely new installation) has the same problem with Tomcat that I reported with the plug-in. I am using j2sdk1.4.2_08 and have tried both Tomcat 5.0 and Tomcat 5.5. I have the same problem with both Windows XP Home Edition and Windows XP Professional.
Thanks for your assistance.
Ron

Cannot start Xserver after installing Solaris 10 08/07 for Sparc

Similar Messages

Maybe you are looking for