Cannot stop an alarm while on call

IPhone 3G: Software version 2.2.1
Please help me that I can not stop an alarm while I am calling somebody. For example, I set an alarm at 12:30 and I receive a call at 12:15. The call prolongs until 12:45, Naturally the alarm rings at 12:30. At 12:30 I tried to switch off the alarm, but there is no display on the screen! I tried to press the home button many times, but there is no reaction, there is no display! The only way I can switch off the alarm is to click on the sleep/wake button on the top of the iphone! But when I click on this, my on-going call also ends.
This is so stupid and it drives me crazy.
The phone has another similar problem: When a call ends there is no display on the phone for about a minute. In this time, even the home button is not active! The only way to make the screen active is by clicking on the sleep/wake button at the top-right side of the iphone.

Do you have the iPhone in a case? If so, the case may be interfering with the proximity sensor. Some cases do that, especially cases not made specifically for the iPhone 3G. If it's in a case, try with the case removed and if that corrects the issue, get a different case.

Similar Messages

Yosemite extremely slow. Cannot stop pop up windows

Yosemite extremely slow. Cannot stop pop up windows on any browsers. Considering going back to Maverick My iMack is mid 2011 21.5. I cannot find a solution to this problem

Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
These may be helpful in improving Yosemite's performance.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Cannot stop Adobe Message coming up

Hello
I keep getting a message coming up on my screen from Adobe Flash Player and I cannot stop it !
The message is as follows:
A website wants to open web content using this program on your computer.
This program will open outside of protected mode. Internet Exporer protected mode helps protect your computer.
If you do not trust this website, do not open this program
Adobe Flash Player
Adobe Systems Incorporated
It doesn't matter whether I press yes allow or do not allow - it still keeps coming up - I have had this problem for a few weeks now and I have run my Anti Virus software and Malware etc, but to no joy - it still keeps coming up.
I don't think that it is coming from yourselves - I think it is a virus?
My operating system is Windows 7 64 bit
And I use Internet Explorer
Can anyone please help me get rid of it?
I have done a screen print if there is anyway I can send you it?
Thank you and kind regards

Hi - thanks for your reply. I looked at my 'protected mode' to see if it was enabled in IE's Internet Options and it was already 'checked'
I have been trying to post my screenshot by clicking the camera icon in this toolbar, but when I browse my documents and click on insert image - a message comes up saying 'the content type of this image is not allowed' !
It is a WordDoc2007 (*docx) or a .wps extension which is a Microsoft Works document and no matter which image I try to 'insert' - the message is still the same.
I am desperate now because no matter what website I go on - your message comes up - and everytime the website is loading it comes up quite a few times when a page is loading. Even while I've been doing this reply to you - everytime I click on a link to take me somewhere on the site - it comes up!
Perhaps if I can send you the screenshot by email - it may work? At least then you would be able to see the screenshot?
I have just thought about sending you the screenshot as a picture, but I don't have 'Paint' - any ideas would be appreciated.
Thank you and kind regards

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

Sapinst stops with error while installing ess component for Java AS

Dear experts,
I really hope you can help me with this one,
We are installing a ABAP/Java AS development system and sapinst has gone through 75% of all execution tasks nicely,
but then stopped with error while deploying components for the Java AS:
ERROR 2009-03-30 13:01:27
CJS-30156 SDM deployment failed for at least one of the components to deploy.<br> SOLUTION: Check 'C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/DISTRIBUTED/AS/CI/callSdmViaSapinst.log' for more information.
ERROR 2009-03-30 13:01:28
FCO-00011 The step enableUsageTypes with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|15|0|enableUsageTypes was executed with status ERROR .
Any help would be really appreciated as I am stuck with this and dont seem to be able to find any information on this one.
Thanks a lot for your help in advance.
Here is the crucial part of callSdmViaSapinst.log:
Mar 30, 2009 12:55:18... Info: Starting: Initial deployment: Selected development component 'ess/bp_ess'/'sap.com'/'MAIN_ERP05VAL_C'/'788220'/'0' will be deployed.
Mar 30, 2009 12:55:18... Info: SDA to be deployed: D:\usr\sap\DE1\DVEBMGS00\SDM\root\origin\sap.com\ess\bp_ess\MAIN_ERP05VAL_C\0\788220\sap.com_ess~bp_ess.sda
Mar 30, 2009 12:55:18... Info: Software type of SDA: J2EE
*Mar 30, 2009 12:55:18... Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) ******
Mar 30, 2009 1:00:21 PM Info: Begin of log messages of the target system:
*09/03/30 12:55:19 - ************************************************************
09/03/30 12:58:07 - Start updating EAR file...
09/03/30 12:58:07 - start-up mode is lazy
09/03/30 12:58:08 - EAR file updated successfully for 578ms.
09/03/30 12:58:08 - Start deploying ...
09/03/30 12:58:42 - EAR file uploaded to server for 30641ms.
09/03/30 13:00:20 - ERROR: Not deployed. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Cannot deploy application sap.com/ess~bp_ess..
                     Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during deploy: Failed to deploy archive D:\usr\sap\DE1\DVEBMGS00\j2ee\cluster\server0\.\temp\deploy\work\deploying\reader1238414327258\sap.comessbp_ess.epa
               The following objects could not be locked: [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess**.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.mx/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.id/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.jp/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr|pcd_service], [pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.de/com.sap.pct.erp.es

Thanks Désirée for your answer and apologies for the late update on this one.
This issue is resolved now, the reason for the error was a lack of memory which probably triggered a timeout in sapinst. After upgrading the memory to 7GB and re-starting the ABAP+Java AS and resuming sapinst everything went through fine. However, this was hard to spot because the logs wouldn't tell you about the lack of memory but about everything else!
regards,
Manfred

Can anyone tell me how to fix this error I am receiving: LabView: File not found. VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"?

Can someone help me please? I am receiving this error everytime I attempt to execute my application:
LabView: File not found. The file might have been moved or deleted, or the file path might be incorrectly formated for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
VI "Mobile Display.vi" was stopped at unknown " " at a call to "Mobile Display.vi"
Attachments:
labview error.jpg ‏176 KB

We cannot help without additional information:
Are you running your code
...in the development system?
...as a standalone application?
...deployed to an embedded target?
If it is a built application, do you explicitly include dynamically called VIs in the build specification?
Who wrote the program? Do you have access to the code?
How is this VI called? Is there sufficient error handling?
Do you manipulate paths as strings or as proper path datatypes with the strip path/build path primitives etc.?
Is it running on the same OS used to develop it ...
LabVIEW Champion . Do more with less code and in less time .

FRM-40039: Cannot attach library d2kwutil while opening form xyz

Hi,
I am running forms 6i.
I copied the folder containing all executables (.fmx, .mmx, .plx) to my local directory 'C:\bin6'.
When i call this from Command Line
c:\orant\bin\ifrun60.exe C:\bin6\xyz.fmx
I get the error "FRM-40039: Cannot attach library d2kwutil while opening form xyz"
I verified that d2kwutil.plx is present in c:\bin6.
Note: I did not change anything in the FORMS60_Path in registry to point to my local directory.
Please help

Hi Smita
Pls answer urself the following questions and check...
1. did u attached the liberary to ur form...?
2. did u set the FORMS60_Path in the registery for the liberary...?
3.did u try a Ctrl-Shft-K (Compile All) then a Ctrl-T (Generate) and a save, then run your form... ?
4. did u check the path in the START IN property to the correct location.. .?if the answer is yes then pls try to do the following...
1. copy d2kwut60.dll + .PLL to client machine C:\orant\TOOLS\OPEN2K60\plsqllib
2. copy the required .FMX file to client pc.
Hope this helps... :)
Regards,
Abdetu...

Cannot stop admin server

Hi all
I use scripts to stop and start admin server and cluster.
After include " -Xmanagement:autodiscovery=true,authenticate=false,ssl=false,port=11202" as JVM parameters, I cannot stop the admin server using stopWebLogic.sh.
If I stop from console it works.
This error seems a port conflict when trying to start a new JVM to stop Adminserver...
Stopping Weblogic Server...
[ERROR][mgmnt ] JMX connector server communication error: null
java.lang.RuntimeException: Error: JMX connector server communication error: nul
l
at oracle.jrockit.management.server.Messages.error(Messages.java:109)
at oracle.jrockit.management.server.Messages.error(Messages.java:123)
at oracle.jrockit.management.server.Agent.main(Agent.java:165)
at oracle.jrockit.management.server.Agent.agentmain(Agent.java:101)
at oracle.jrockit.management.server.Agent.start(Agent.java:214)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at jrockit.management.AgentStarter.startAgent(AgentStarter.java:135)
Caused by: oracle.jrockit.management.server.AgentError
at oracle.jrockit.management.server.JMXConnector.startNewServerImpl(JMXC
onnector.java:82)
at oracle.jrockit.management.server.RemoteJMXConnector.newServer(RemoteJ
MXConnector.java:233)
at oracle.jrockit.management.server.sun.RemoteJMXConnectorImpl.newServer
(RemoteJMXConnectorImpl.java:112)
at oracle.jrockit.management.server.RemoteJMXConnector.startNewServer(RemoteJMXConnector.java:181)
at oracle.jrockit.management.server.JMXConnector.start(JMXConnector.java:64)
at oracle.jrockit.management.server.Agent.start(Agent.java:64)
at oracle.jrockit.management.server.Agent.main(Agent.java:163)
... 7 more
Caused by: java.rmi.server.ExportException: Port already in use: 11202; nested exception is:
java.net.BindException: Address already in use
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:310)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:218)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:394)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:130)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:190)
at oracle.jrockit.management.server.sun.SunRMIExporter.exportObject(SunRMIExporter.java:36)
at javax.management.remote.rmi.RMIJRMPServerImpl.export(RMIJRMPServerImpl.java:84)
at javax.management.remote.rmi.RMIJRMPServerImpl.export(RMIJRMPServerImpl.java:76)
at javax.management.remote.rmi.RMIConnectorServer.start(RMIConnectorServer.java:388)
at oracle.jrockit.management.server.JMXConnector.startNewServerImpl(JMXConnector.java:80)
... 13 more
Caused by: java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:365)
at java.net.ServerSocket.bind(ServerSocket.java:319)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at java.net.ServerSocket.<init>(ServerSocket.java:97)
at sun.rmi.transport.proxy.RMIDirectSocketFactory.createServerSocket(RMIDirectSocketFactory.java:27)
at sun.rmi.transport.proxy.RMIMasterSocketFactory.createServerSocket(RMIMasterSocketFactory.java:333)
at sun.rmi.transport.tcp.TCPEndpoint.newServerSocket(TCPEndpoint.java:649)
at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:299)
at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:218)
at sun.rmi.transport.tcp.TCPEndpoint.exportObject(TCPEndpoint.java:393)
at sun.rmi.transport.LiveRef.exportObject(LiveRef.java:129)
at sun.rmi.server.UnicastServerRef.exportObject(UnicastServerRef.java:190)
at oracle.jrockit.management.server.sun.SunRMIExporter.exportObject(SunRMIExporter.java:36)
at javax.management.remote.rmi.RMIJRMPServerImpl.export(RMIJRMPServerImpl.java:84)
at javax.management.remote.rmi.RMIJRMPServerImpl.export(RMIJRMPServerImpl.java:75)
at javax.management.remote.rmi.RMIConnectorServer.start(RMIConnectorServer.java:388)
at oracle.jrockit.management.server.JMXConnector.startNewServerImpl(JMXConnector.java:80)
at oracle.jrockit.management.server.RemoteJMXConnector.newServer(RemoteJMXConnector.java:233)
at oracle.jrockit.management.server.sun.RemoteJMXConnectorImpl.newServer(RemoteJMXConnectorImpl.java:112)
at oracle.jrockit.management.server.RemoteJMXConnector.startNewServer(RemoteJMXConnector.java:181)
at oracle.jrockit.management.server.JMXConnector.start(JMXConnector.java:64)
at oracle.jrockit.management.server.Agent.start(Agent.java:64)
at oracle.jrockit.management.server.Agent.main(Agent.java:163)
at oracle.jrockit.management.server.Agent.agentmain(Agent.java:100)
at oracle.jrockit.management.server.Agent.start(Agent.java:213)
... 5 more
Could not create the Java virtual machine.
Done

This is because the process to stop the JVM is also trying to use the same host/port combination for the remote JRockit monitoring as the same setDomainEnv script is likely called in either case. What you want to do is ignore those options when launching the JVM (the WLST script) that tells the server to shut down.

Unable to stop the alarm in Nokia 5233

Hi ,
I am using Nokia 5233 for past 3 months. I am facing a problem while using the Alarm.
When the alarm generated, i am unable to stop it. When i pressed the close button its going into SNOOZE mode but not into stop mode.
This is happening when my mobiles is locked.
Is there anyway to stop the alarm, eventhough the mobile is locked.
Thanks,
Srikanth.

Make sure that it did not end up being added as a the Keynote Soundtrack +(Documents>Audio Tab)+. If it is the soundtrack, it will play throughout the Keynote, if it is just added to a slide, it should stop when you change slides.

I cannot stop emails from this community.

I cannot stop emails from this community. I changed my email preferences to "no" on every category yet I'm getting hundreds of them. How do I stop them?

Stopping emails from ASC is a three step process. All the steps in the user tip I wrote have to be followed as written.
There is confusion because there are two settings Email Notification Preferences and Email Notifications which sound the same but control different things.
As a rule if you are getting 100's of emails a day then
If you are receiving many notifications per day you most likely have selected to receive notifications from a community. That means you are getting notified anytime anything is posted to that community. Some communities in ASC can generate 100's of posts per day.
To delete the notifications you do not want to receive, select the checkbox after the notification and then press Remove Selected Notifications.
I'll alert the hosts but while you are waiting go through the steps in the tip again paying special attention to the Email Notifications.
regards

SYS-170111 - Cannot stop memory monitor thread: RWThreadImp::terminate -

Hi Experts,
WE have this warning in pretty much every job in production. But the warnings are not specific to certain jobs they might occur one day and not the other day.
Cannot stop memory monitor thread: <RWThreadImp::terminate - No thread is active within the runnable>.
I know looking at the release notes this issue was fixed in 3.0 (12.0.0), we are using 3.2 (12.2.0) and having the same issues. The job server is on a linux 64 bit. I have not seen this issue in any of our windows job server. Is this bug specific to linux or is there a resolution for this.
Appreciate your help in advance.
Thanks
AJ
Edited by: alangilbi on Sep 28, 2011 5:17 PM

Hi, AJ.
As can be seen in the KBA 1455412 this is a known behavior.
"As a result of fixing the problem identified in ADAPT 00890818 in release 12.0.0.0, this message is displayed by design. If there is really a problem in stopping the memory monitor thread an exception is thrown and an error message is logged.
Background:
In the memory monitor's shutdown logic, once it tells the monitor thread to shutdown it waits for the thread to terminate but only for 10 seconds. It could be that at this same time the wait expired when the thread actually terminates. So when this happens in the shutdown logic we force terminate the thread. Since there is no active thread anymore the terminate call throws an exception and then we catch it and then throws the error for the job."
You can just ignore this warning.
Leo.

How to stop execution in while loop without stopping execution of other loops in the same vi

HI
I am quite a novice in Labview.
I have a problem in my project. I used a while loop inside my vi to build an array of ten values along with other loops. Then I used a stop button to stop manually the while loop. But it seems like the loop doesn't stop in the middle of the array building and so other loops in the vi doesn't work until the while loop finishes building the array and as soon as while loop execution is over, the complete vi stops. But all that I wanted was to build the array using the shift register along with the control to stop building array anytime. And not to stop execution of other structures when the while loop finishes.
Can anyone help me?
Rahul

Hi Rahul,
Modified ur Vi to work with single button.
But the subtract case is not in any loop.
So, once both the loops stop, the subtract case will execute only once. Depending on state of subtaract boolean at that time, corresponding case will be executed and the Vi will stop.
so think of a logic where u can put this also in a new loop.
Or you can also incorporate it in one of the two loops and pass the other loop's data to it.
Let us know how you will proceed in this regard
I am posting your VI as well a VI with my modifications VI in Labview 7.0 so that Thomas can give his suggestions too
Plus, always keep a time delay in your while loops.
Oh sorry, the "arrayinouttestnewfinal.vi" is the modified vi
Regards
Dev
Message Edited by devchander on 01-10-2006 06:15 AM
Message Edited by devchander on 01-10-2006 06:19 AM
Attachments:
arrayinouttestnewfinalnew4.vi ‏59 KB
arrayinouttestnewfinal.vi ‏63 KB

Can I get a refund on a movie that stopped to download while I was in the middle of it?

I want a refund. My movie stopped to download while I was in the middle of it. Who can I contact? Why do I want to watch a load screen for hours? This is terrible.

Welcome to the Apple Community.
While frustrating, problems are usually overcome, I doubt very much you will get a refund because your viewing was interupted, but you can always try. In all but a very few cases the cause of such problems is the users ISP or home LAN, so I would understand Apple being reluctant to give refunds in such cases.

I had this problem: "cannot connect to itunes" while trying to download an app so i went to the settings and i kinda messed it up that now i have not apps or itunes icon on my ipad! :( can anyone help me?

I had this problem: "cannot connect to itunes" while trying to download an app so i went to the settings and i kinda messed it up that now i have not apps or itunes icon on my ipad! can anyone help me?

First, try a reset: hold down the home button along with the power button until you see the Apple, then let go.

I attempted to download X Yosemite to my Mac Pro. It timed out and would not finish. I cannot stop the website from believing it is still downloading. Help.

I attempted to download X Yosemite to my Mac Pro.
It timed out and would not finish.
I cannot stop the website from believing it is still downloading.
Help.

oatgeo wrote:
I checked the proxy and it should be OK. That's mean I have to try and try again until I get it from the slow servers.
Yes.

Cannot stop an alarm while on call

Similar Messages

Maybe you are looking for