Cannot stop users disabling WiFi
Users who are not local administrators and via the control panel cannot do so can disable the WiFi via the sidebar BS in Windows 8.1. This is costing us large amounts of time supporting customers and talking through remotely re-enabling or leading to confusion
for us attempting to troubleshoot issues - There are now 3 places (control panel, sidebar, physical switch and/or keyboard shortcut) to go through.
Why is this possible to do when the users are no local administrators and should not have that access? They receive a UAC prompt when attempting to do the exact same thing in Control Panel.
How do we stop users exploiting yet another ignored bug from Microsoft?
Hi
Are they part of any administrator groups on the machine?
The other alternative is using a GPO to "remove" the feature from the computer but i guess they need to be on your network for that to work.
for ref: http://www.addictivetips.com/windows-tips/how-to-prevent-windows-7-local-account-users-from-changing-internet-settings/
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Similar Messages
-
During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
Please how do i reactivate iPhone?Hello DadiPrince,
The following article contains information beneficial to getting your iPhone back into normal working order.
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
All the best,
Allen -
I have an AT&T iPhone but only use wifi. Since I updated my phone to iOS 6.0 I cannot receive text messages from other iPhone users outside wifi range. What is the issue?
Check Settings>General>Cellular to be sure you have Cellular Data set to On.
-
My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!
My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!
-
i have developed flash audio and video chat application, every thing is working fine with all browser with in XP(os),
but i have problem in Mac(os), i.e i cannot able to click on Website Privacy Settings panel allow button in Mac 10.5.8, cursor is pointing on allow button, when am clicking on it nothing is happening, and there is no probelm in XP, i can able to click on Allow button, can any body help me How do i stop or disable appearing Website Privacy Settings panel before webcam starts..
i went through with http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_man ager06.html , here its allowing without appear website privacy seeting panel for only one user that also for that particular PC only,i wanted to get allow for all online web users by default allow with out appearing website privacy seetings panel
am keeping searching for it but no use i don't find out any soution for it.
please can any body help me out from this , i will be very Thank full to you in advance.
Kalidas.Hello JayCharles,
am using FalshPlayer 10, No i haven't filled the bug report, i'll do it now.
when i click the button in Mac Leopard 10.5.8, the button remains unresponsive to the click,
is there any alternate way to make disable or stop or with out appearing privacy setting dialog box,i.e like we see in gmail and yahoo live video chat or else our people have to contact adobe customer service provider to get permission i.e like http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager06.htm l in this site directly we are selecting one url and selecting in (radio button) for always allow, i thought that we need to take permission from adobe people to get select our ip from their end ,by that is there any chance..
please help me out from this ,we have very short time to delivery our project i will be very Thank full to you in advance. -
Yosemite extremely slow. Cannot stop pop up windows
Yosemite extremely slow. Cannot stop pop up windows on any browsers. Considering going back to Maverick My iMack is mid 2011 21.5. I cannot find a solution to this problem
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
These may be helpful in improving Yosemite's performance.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Identity service cannot find user
Installed BPEL 10.1.2
added user using jazn.jar
Now trying to log into worklist sample application
and I get identity service cannot find user. Do I need to assign any role(s) to new user.
Let me know.
I am seeing simple questions not getting answers. Is this an Active Forum?
Thanks
Raghuclosed
for OAS 10.1.2.0.2. & BPEL PM 10.1.2.0.2
I Install BPEL in MiddleTire
1. ./runInstaller
2. home = OAS home
3. tea
4. emctl stop em
emctl start em
5. Oracle_Home\opmn\bin\opmnctl stopproc ias-component=OraBPEL
Oracle_Home\opmn\bin\opmnctl startproc ias-component=OraBPEL
6. if OID working throw SSL, then 7,8 else 9
7. edit file Oracle_Home\j2ee\OC4J_BPEL\config\jazn.xml
<jazn provider="LDAP" location="ldap://host:636" default-realm="us">
<property name="ldap.user" value="cn=orcladmin"/>
<property name="ldap.password" value="!welcome1"/>
<property name="ldap.protocol" value="ssl"/>
</jazn>
8. edit file Oracle_Home\integration\orabpel\system\services\config\is_config.xml
<BPMIdentityServiceConfig
xmlns="http://www.oracle.com/pcbpel/identityservice/isconfig">
<provider providerType="JAZN" name="oid" >
<connection url="ldap://host:636" binddn="cn=orcladmin"
password="welcome1" encrypted="false">
<property name="securityProtocol" value="ssl" />
</connection>
</provider>
</BPMIdentityServiceConfig>
then 11
9. edit file Oracle_Home\j2ee\OC4J_BPEL\config\jazn.xml
<jazn provider="LDAP" location="ldap://host:389" default-realm="us">
<property name="ldap.user" value="cn=orcladmin"/>
<property name="ldap.password" value="!welcome1"/>
</jazn>
10. edit file Oracle_Home\integration\orabpel\system\services\config\is_config.xml
<provider providerType="JAZN" name="oid" >
<connection url="ldap://host:389" binddn="cn=orcladmin"
password="welcome1" encrypted="false"/>
</connection>
</provider>
11. edit file Oracle_Home\j2ee\OC4J_BPEL\application-deployments\hw_services\orion-application.xml
<jazn provider="LDAP" location="ldap://host:389" default-realm="us" >
<jazn-web-app auth-method="SSO"/>
</jazn>
12. Oracle_Home\opmn\bin\opmnctl stopproc ias-component=OraBPEL
Oracle_Home\opmn\bin\opmnctl startproc ias-component=OraBPEL
II Deploy BPEL portlets
1. throw EM add EAR to OC4J_BPEL:
fie: $ORACLE_HOME/integration/orabpel/system/services/lib/bpelportlet.ear
а. Parent app = orabpel
б. User Manager = Use JAZN LDAP User Manager
2. edit file Oracle_Home\j2ee\OC4J_BPEL\application-deployments\bpelPortlet\orion-application.xml
<jazn provider="LDAP" location="ldap://host:port" default-realm="us" >
<jazn-web-app auth-method="SSO"/>
</jazn>
3.Oracle_Home\opmn\bin\opmnctl stopproc ias-component=OraBPEL
Oracle_Home\opmn\bin\opmnctl startproc ias-component=OraBPEL
4. Register BPEL provider
http://bpel_host:bpel_port/BPELPortlet/providers
а. Login Frequency = Once Per User Session
636 - OID SSL port
389 - OID non SSL port -
Problem with users disabling ARD client service
I've got a problem and i'm not quite sure of the work around. I'm a PC guy by nature and can't quite figure this out.
I'm having a problem with users disabling the ARD service from the sharing menu. Unfortunately users need to have admin privleges to do their work so I can't simply give them a standard account.
I've hidden the ARD user account i created from the login window through Netinfo, but I need to find a way to stop users from shutting the ard service down.
They don't seem to understand that the company requires that it be on the computer. Now, I'm the one who is set as the admin for ARD in the building, however we really just use it to rollout drivers, install packages, and its a lifesaver for remotely fixing problems with programs. The company didn't really buy it to spy on the employee's.
Is there any way to hide the service from an admin level account? Or keep them from shutting it down?
BTW, this would have to be done on multiple machines running both panther and tiger.
Any help would be appreciated as I'm not quite sure where to start.First, as a matter of policy, let them know this service is active, and needs to remain active. If they disobey this instruction and turn it off, you have a human resources issue, not a technical issue.
Second, there are very few enterprise users that need admin access to their machines. Oh, they ALL think they do, and there will be howling when non-admin status is first imposed, but we have 350 users in a publishing environment with less that 20 setup as admins. Those users are almost all superusers who assist others in a technical role.
We have far fewer software problems like this and with ARD, IT can install/ authorize installation of software remotely should a user need that. It simply does not dramatically impact our users to have non-admin access. On the other hand, we recognize that a FEW users will need more access, and grant that on a case-by-case basis. -
Hi, on my fathers pc sometimes when downloading multiple tabs start opening and I cannot stop this happening. Could anybody please help me? for example, trying to download TomTom Start 25 user manual
You get that problem if you select the Firefox program to handle a file if you get an "open with" dialog.
*https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows -
Cannot logon user defined in header variable!
Dear Guru's
I'm seeing this this error when I type the URL. "Cannot logon user defined in header variable!"
I have stopped and sterted the portal.
I could not find the authschemes.xml (if this is related)
Thanks,
EP6 SP2
NarenHi ,
Please explain what exactly you want to do ..If you want to use Header Variables for User Authentication go through this links
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/5ddc40132a8531e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/68/5ddc40132a8531e10000000a1550b0/frameset.htm
Thanks n Regards
Santosh
Reward if helpful !!! -
Please,I want to stop users from visiting particular wensites while connected to the internet. How do I configure Firefox to automatically stop users from visiting such dangerous sites?
Thanks, Ronda! I haven't been able to try your suggestion because I fried my router! So I need to get a new wireless router before proceeding.
(I may start a new thread about getting a new router, but I will look for answers first to my questions and only start one if I cannot find answers.)
After I get a new router, I will try what you suggested and report back here. -
Cannot add users to new domains anymore
I got messaging server and delegated admin to work just fine recently until I tried getting LDAP authentication to work so LDAP users could log into Sunrays.
I used idsconfig and saw that it added a bunch of stuff to the directory so I deleted that stuff after I realized I couldn't add users to a new domain anymore. It just says "cannot create user - unknown error". I can still add users to old domains just fine.
And I tried both DA and commadmin, neither work. Heres my Messaging server and DA version:
Sun Java(tm) System Messaging Server 6.2-3.04 (built Jul 15 2005)
libimta.so 6.2-3.04 (built 01:43:03, Jul 15 2005)
SunOS testy.i-n-control.com 5.10 Generic_118822-25 sun4u sparc SUNW,Sun-Fire-V440
Delegated Administrator 6.3-0.09
I turned on debugging for DA and heres the output:
TRACE [Wed Aug 02 10:10:47 MDT 2006] Default people container = ou=People,o=domain,dc=mail,dc=example,dc=com
TRACE [Wed Aug 02 10:10:47 MDT 2006] ServerPushThread: setting stop flag
TRACE [Wed Aug 02 10:10:47 MDT 2006] commTaskManager: progress thread stopped
TRACE [Wed Aug 02 10:10:47 MDT 2006] com.iplanet.am.sdk.AMException: Unable to create entry.
at com.iplanet.am.sdk.ldap.DirectoryManager.processInternalException(DirectoryManager.java:433)
at com.iplanet.am.sdk.ldap.DirectoryManager.createUser(DirectoryManager.java:1046)
at com.iplanet.am.sdk.ldap.DirectoryManager.createEntry(DirectoryManager.java:1525)
at com.iplanet.am.sdk.AMDirectoryManager.createEntry(AMDirectoryManager.java:651)
at com.iplanet.am.sdk.AMCacheManager.createEntry(AMCacheManager.java:337)
at com.iplanet.am.sdk.AMObjectImpl.create(AMObjectImpl.java:1009)
at com.iplanet.am.sdk.AMPeopleContainerImpl.createUser(AMPeopleContainerImpl.java:285)
at sun.comm.cli.server.servlet.CreateUser.create(CreateUser.java:677)
at sun.comm.cli.server.servlet.CreateUser.doTask(CreateUser.java:91)
at sun.comm.cli.server.servlet.commTaskManager.execute(commTaskManager.java:196)
at sun.comm.cli.server.servlet.commServlet.doPost(commServlet.java:90)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:807)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
TRACE [Wed Aug 02 10:10:47 MDT 2006] After AM Exception , msg being sent is Unable to create entry.^324^NONE
TRACE [Wed Aug 02 10:10:47 MDT 2006] in CLIPageData constructor:status = 1
TRACE [Wed Aug 02 10:10:47 MDT 2006] commTaskManager - execute => generateOutput
TRACE [Wed Aug 02 10:10:47 MDT 2006] In CLIPageGenerator ....
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput : cliData.status = 1
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput : CLIPageData.OK = 0
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput : CLIPageData.FAIL = 1
TRACE [Wed Aug 02 10:10:47 MDT 2006] Failed: Unable to create entry.^324^NONE
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput - Printing successfull results
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput - status => FAIL
TRACE [Wed Aug 02 10:10:47 MDT 2006] CLIPageGenerator - generateOutput - message => Unable to create entry.^324^NONE
TRACE [Wed Aug 02 10:10:48 MDT 2006] ServerPushThread: done
TRACE [Wed Aug 02 10:10:48 MDT 2006] ServerPushThread: done
TRACE [Wed Aug 02 10:10:49 MDT 2006] ServerPushThread: done
TRACE [Wed Aug 02 10:10:58 MDT 2006] sun.comm.cli.server.servlet.commLDAPAuth: shutting down. Total access count = 1
Message was edited by:
nate.wheelerFrankly, I'm new to LDAP so I don't know really what
changed.No time like the present to start learning.
Its weird, I can do some things, but not
others. Like I can assign service packages, but not
change the login id or password of a user. So it
doesn't look like amadmin can't change things.LDAP provides "ACI", or Access Control settings that can be changed, and create exactly the kinds of things you're looking at.
The Directory Console can view ACI
>
The password encryption seemed to have changed from
{SSHA} to {CRYPT}. Although I have no idea how to
switch it back or where to look to see if it did.Unlikely to have made any difference. That should be transparent to the application using DS.
Most of our applications don't compare the password entry, but attempt a BIND for that very reason.
Again, I'd be looking at your LDAP access logs for a clue to what's happening.
>
Message was edited by:
nate.wheeler -
Access Connections - disable WiFi on Wired Connect with docking station
Issue: Need to auto switch without user interaction from Wired to WiFi and back to Wired.
Example - User leaves desk/docking station with wired LAN to a meeting on WiFi then returns to their desk/dock. Laptop may hit sleep mode on these steps as well.
I'm moving from Dell to Lenovo and new to AC - so far no luck disabling WiFi on Wired connect. It's a breeze with Intel PROset + "adapter switching" and can be done manually with Dell Wifi drivers ("disable on Wired Connect"). I assumed Thinkvantage Access Conentions would actually be more robust than these. Should we just use PROset even though it doesn;t ship with the systems nor is a download for Lenovo T-Series? PROset method - http://www.intel.com/support/wireless/wlan/sb/CS-028815.htm
Working to achieve this as a managed policy for many computers. AC looks great but wish it had this setting like Intel PROset!!!
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
Solved!
Go to Solution.Hi Tpad-rex, welcome to the forums,
Please take a look at the profile settings in access connections. (Select the profile and choose edit profile). In the profile you should have two adapters showing; LAN and WLAN, make sure that the LAN is above the WLAN in the priority list. I'm guessing you have it the other way around, did you maybe set it up as a WLAN connection first??
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
I cannot stop emails from this community.
I cannot stop emails from this community. I changed my email preferences to "no" on every category yet I'm getting hundreds of them. How do I stop them?
Stopping emails from ASC is a three step process. All the steps in the user tip I wrote have to be followed as written.
There is confusion because there are two settings Email Notification Preferences and Email Notifications which sound the same but control different things.
As a rule if you are getting 100's of emails a day then
If you are receiving many notifications per day you most likely have selected to receive notifications from a community. That means you are getting notified anytime anything is posted to that community. Some communities in ASC can generate 100's of posts per day.
To delete the notifications you do not want to receive, select the checkbox after the notification and then press Remove Selected Notifications.
I'll alert the hosts but while you are waiting go through the steps in the tip again paying special attention to the Email Notifications.
regards -
I cannot turn on my wifi! I have reset and turned off my phone multiple times and the Wifi button is completely greyed out. please help me
I had the same issue and i just resolved it, I have an iphone 4s and last night was al perfect and this morning i just verified that i had a new updated installed on my phone and my WiFi was disable and did restore as new like crazy until i did this after me being tired of restoring my phone from factory setting and then my lately back up on icloud i did my last move and it got fixed this is what i did ok.
STep #1 Do a back up manualy onto your cmputer throu itunes (NOT ICLOUD) ok
Step #2 after doing the the back up go and do on you phone or throu itunes do the factory reset setting and erase everything and make like new phone
Step #3 Leave yhe iphone conected to Itunes.
Step #4 Once your iphone is reset to factory setting on your Itunes Window will say NO SIM CARD DETECTED before clicking on your right up corner (DONE) slide your phone and it will appear conect to a network do the process and put the pasword of your WiFi and until it says conected,It will say (No Service) but it will be conected to WiFi then click on the Itunes Window (DONE)
Step #5 DO a back up recovery from the last back up you did onto your computer not Icloud ok!!
Step #6 after you recovered your phone from last back up on your computer it will atumaticaly have service and WiFi conection like before..
I hope i did explained well to you i did work for me after 7 hours of doing reset and back up =)
Maybe you are looking for
-
Retaining original font in CR2008 while exporting to PDF
Hi, Do we have a fix/patch available for retaining the original font when exporting to PDF in 2008 yet? The solution i see is to update the registry files. Do we have any other solution like a fixed dll file or a patch already available for download
-
How can I reduce the amount of space between paragraphs in Pages?
How can I reduce the amount of space between paragraphs in Pages?
-
System memory low, delete languages!
Every time when I try to download any app. I get dis error, I deletes all my applications but still if I try to download it gives me same error. It says delete my world items. I got only bbm and app world on my world but it shows 6MB of 256MB free! P
-
Hi I just made an itunes acount for myself but when I go to login to the account in itunes on my window 7 computer it simply says "accessing store" and then never logs in. Is there a solution to this problem or is it just my slow internet causing the
-
Hi, I was trying to find some apps for iPad/iPad mini which are useful in conducting a wireless site-survey. Any app which will scan air and gives list of available wireless networks along with their RSSI/SNR values. I found one app WIFI Analyzer, b