Cannot Store Complete Internal Data in the File "blah Bla" with format ""

Very Unexpected error.
Not sure what to do with this.
See attached file.
I have Diadem Advanced v12
Tim
Solved!
Go to Solution.
Attachments:
Untitled2.png ‏7 KB

I tried saving it in TDMS and TDM.
I was able to save it in excel so I was able to save my data.
Tim

Similar Messages

  • Diadem Error: Cannot Store Complete Internal Data

    I am trying to save data in my portal to a TDM, but I get the error: "Cannot store complete internal data in the file "FILENAME.TDM" with the format "TDM".  I'm not sure how to diagnose the problem, since the error does not provide much information.
    I have a script that pulls together two seperate files, a *.dat and an *.atfx file.  It searches through the data to find certain measurments, and then averages a few channels and adds these averages to a new group. I have 16 groups and 257 channels.  The file is fairly large, so maybe I am exceeding some limits? 
    Any ideas? 
    Thanks.

    Perhaps this is related.  While I have the data loaded that cannot be saved in the TDM, and I am browsing he help file.  I get an error claiming that there is not enough memory for this task.  I click ok and diadem abruptly closes.  I have attached a screen shot of the error, also showing available system resources, and it seems like I should have plenty available.  I have 1.5GB of available memory, and 46GB of available disk space.  Why am I getting this error.  Is there some setting that limits how much resources diadem can use? 
    I have also attached a screen shot showing system resources AFTER diadem closed. 
    Attachments:
    Not enough memory error.JPG ‏190 KB
    Not enough memory error - Post diadem close.JPG ‏74 KB

  • Cannot store complete internal data error

    Hello Diadem gurus,
    I have some tdms files that I am post processing. I use diadem for that purpose. Some files cause the error "cannot store complete internal data error in the file."
    See the attached picture. I assume it may be caused by my page file or a setting within Diadem. Any suggestions on how to prevent this?
    Nasty detail is that the source files were actually lost! (I am saving changes made with diadem back into the same file, but in reality it simply overwrites the file.)
    Attachments:
    diadem error.JPG ‏17 KB

    Hi aartjan,
    There were a number of improvements made to the TDMS DataPlugin, which debuted with DIAdem 10.1.  These improvements are available for download at www.ni.com/dataplugins for DIAdem 10.1 users.  However, there was one fix made that was too extensive to backport to the DIAdem 10.1 codebase, and this I believe is the one you need.  This last fix regarded the saving of enormous TDMS files.  The TDMS DataPlugin which shipped with DIAdem 10.1 expected to fit all the data values into memory at one time.  The TDMS DataPlugin which ships with DIAdem 10.2 Beta3 is able to buffer the data values to disk, therefore not requiring the entire file to fit in memory in order to succeed in exporting it to TDMS file.
    The good news is that if you install DIAdem 10.2 Beta3 you will get the DIAdem 10.2 USI layer along with the correct TDMS DataPlugin.  Then even if you uninstall DIAdem 10.2 Beta3, the newer USI and TDMS DataPlugin will remain and work correctly with your DIAdem 10.1.  You can get the DIAdem 10.2 Beta3 by visiting the www.ni.com/beta website and requesting to participate in the DIAdem 10.2 Beta program.  Once you have requested this, remind me to activate your Beta profile, after which you will be able to download the installer.
    Regards,
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Tried to "Open As" in PS a NEF file I modified in LR.  Got the following error message:  "Could not complete your request because the file format module cannot parse the file."  I can "Open" the file in PS, but then the changes I made in LR (and saved in

    Tried to "Open As" in PS a NEF file I modified in LR.  Got the following error message:  "Could not complete your request because the file format module cannot parse the file."  I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file.  HELP!

    If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
    There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
    Gene

  • Cannot Interpret the data in the file

    Hi,
    I need to upload rate routing and I have created a BDC program using a sample recording.
    While I am uploading the data from the flat file, I am getting an error message " Cannot Interpret the data in the file ".
    Please help me where I might have gone wrong. I have checked with template in the flat file and it is correct.
    Please do the needful.
    Thanks,
    Ranjan R Jinka
    Edited by: Ranjan Jinka on Apr 29, 2011 8:55 AM

    Hai Ranjan,
    Please, Check this
    " Can not interpret the data in file " error while uploading the data in DB
    - Check the heading of the excel column and filed used in program.
    If possible, please paste the program so the viewers have a better idea and you will get the exact solution.
    Regards,
    Mani

  • I saved my Form Central spreadsheet file once as a excel file but it will not allow me to save it a second time as an excel file.  It says that I cannot complete this action because the file me be open in another application, but it is not open in another

    I saved my Form Central spreadsheet file once as a excel file but Forms Central will not allow me to save the file a second time as an excel file.  I am informed that I cannot complete this action because the file me be open in another application, but it is not open in another application. What is the problem, and how do I solve the problem.  Thank you. Jeff

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • HiRISE JP2 Images fail to open in CS6 (64bit) - Could not complete your request because the file-format module cannot parse the file.

    Unable to open any of the HiRISE images within PS CS6.  Receive the following error:  "Could not complete your request because the file-format module cannot parse the file."
    The files are NOT corrupt as I can open them in IrfanView and ACDSee, just not Photoshop CS6.
    Image Site:  HiRISE | Search for Beagle 2 (ESP_037145_1915)
    Greyscale:  http://hirise-pds.lpl.arizona.edu/download/PDS/EXTRAS/RDR/ESP/ORB_037100_037199/ESP_037145 _1915/ESP_037145_1915_RED.QLOO…   (543MB)
    System:
         Core i7-4770K
         12GB RAM
         GTX970 4GB RAM

    I downloaded a small HiRise JP2 and used Preview to export as Tiff.  It opens up just fine.
    Apparently the JP2 takes up an awful lot of memory uncompressing, and Photoshop gives up.
    HiRISE | Sedimentary Fans North of Mojave Crater (ESP_038851_1900)
    (Deleted that second .jp2 file. It slowed my Windows 7 system to a crawl).
    I also got the same error on the file in Message one, so saving it as a tiff would work.
    Gene

  • CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

    I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
    Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information.
    Can anyone please help?

    yellowmledbetter wrote:
    Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
    The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
    The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
    But, here goes:
    Your cameras are newer than your raw converter, so it won't understand them.
    CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
    Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
    All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
    DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
    If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
    All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
    I really should be in bed.

  • Steady Stream of "Searching for movie data in the file..." Error Messages

    My iMovie has been crippled by error messages that pop up whenever I try to accomplish anything in iMovie. I always see "Searching for movie data in the file 'healyintro.mov'" for a few minutes, then "The movie file 'healyintro.mov' cannot be found. Without this file, the movie cannot play properly." I cannot actually use iMovie because of these errors.
    I've tried everything from reinstalling iMovie to removing application support files to removing my iMovie Events and iMovie Projects folders to creating a .mov file, calling it healyintro.mov and seeing if that'll shut iMovie up – nothing works.
    Once in a while, iMovie will ask for a different movie file, with the same problem.
    Any ideas?

    I am having the same issue. I don't know what the previous poster means by allowing the system to continue, since I'm prompted with a "Cancel" / "Search" dialog after each missing clip. Slight digression: "Search" is not even the correct term here according to UI guidelines ("Choose" or "Locate" might be better choices given the file picker dialog that results).
    I'm actually using Aperture to relocate my video masters on removable media, which is a very nice feature of Aperture, but completely breaks iMovie unless it's connected. Seems like a pretty major oversight.... can we just have it fail more gracefully here and allow us to work with new stuff without getting hung up on missing movie clips from the past?

  • I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

    I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

    I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
    I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
    Edit: I just removed every project I have from the Media Browser. Still no luck.

  • Error while writing the data into the file . can u please help in this.

    The following error i am getting while writing the data into the file.
    <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
    <part name="code">
    <code>null</code>
    </part>
    <part name="summary">
    <summary>file:/C:/oracle/OraBPELPM_1/integration/orabpel/domains/default/tmp/
    .bpel_MainDispatchProcess_1.0.jar/IntermediateOutputFile.wsdl
    [ Write_ptt::Write(Root-Element) ] - WSIF JCA Execute of operation
    'Write' failed due to: Error in opening
    file for writing. Cannot open file:
    C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
    BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing. ;
    nested exception is: ORABPEL-11058 Error in opening file for writing.
    Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
    BPEL_Import_with_Dynamic_Transformation
    \WORKDIRS\SampleImportProcess1\input for writing. Please ensure 1.
    Specified output Dir has write permission 2.
    Output filename has not exceeded the max chararters allowed by the
    OS and 3. Local File System has enough space
    .</summary>
    </part>
    <part name="detail">
    <detail>null</detail>
    </part>
    </bindingFault>

    Hi there,
    Have you verified the suggestions in the error message?
    Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing.
    Please ensure
    1. Specified output Dir has write permission
    2. Output filename has not exceeded the max chararters allowed by the OS and
    3. Local File System has enough space
    I am also curious why you are writing to a directory with the name "..\SampleImportProcess1\input" ?

  • When opening pdf file I cannot choose between opening or downloading the file?

    Adobe offers just the download. How to change this?

    Hi, thanks for your reply. I use Mozzilla firefox the 15.01 version. How do I change the settings then?
    Martin
    Date: Fri, 21 Sep 2012 22:27:42 -0600
    From: [email protected]
    To: [email protected]
    Subject: When opening pdf file I cannot choose between opening or downloading the file?
        Re: When opening pdf file I cannot choose between opening or downloading the file?
        created by Pat Willener in Adobe Reader - View the full discussion
    That choice is not made by Adobe, but your browser, of which you give no details. 64-bit browsers cannot open PDF files, as the Adobe Reader plugin is a 32-bit app.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4718369#4718369
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4718369#4718369
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4718369#4718369. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • Could not complete your request because the file is not compatible with this version of photoshop

    Hello,
    I'm a beginner in PS. I was edit TIFF file in PS. Size of file is 21x89.1(22.6 MB). Then suddenly power - cuted. But after 5 min turn on PC and PS can't open my TIFF file.
    Error is (could not complete your request because the file is not compatible with this version of photoshop)
    What should I do, how I open this TIFF file? I realy need to open this file?
    Please help me...
    Regards, Suvd.S

    Out of curiosity, were you actually saving the file at the moment the power cut off, or had you just saved it?
    If not, I don't understand the reason the file should have become corrupted.  If it was successfully saved on disk from the prior save operation, just shutting off the power on Photoshop would lose your current edits, but the file should still be intact.
    -Noel

  • HT1473 I have two separate iTunes libraries on different computers and I would like to compact into one. But I cannot without completely erasing one of the libraries. How can I do this without deleting anything?

    I have two separate iTunes libraries on different computers and I would like to compact into one. But I cannot without completely erasing one of the libraries. How can I do this without deleting anything?

    Copy the content from one computer to another and import the media into iTunes.
    Any playlists, playcounts, etc on the computer the content is being moved from will be lost.

Maybe you are looking for