Cannot stream Netflix on TV with airport at the same time.

I have called every 800 number with an Indian accent available. I have called Comcast, Samsung, and my local Apple dealer. They all say i need to call each other's support network. No help. They just read from a computer a response that I have by now memorized. I'm about to send my new Samsung 2500 back to Amazon.
Here's the deal: I have a Comcast modem for internet and phone. I have a Netgear router. I have a Samsung Blu-ray 2500 DVD player that streams NetFlix and I have Airport Express. After hours of fidgeting, I have finally figured out that I can either stream NetFlix or get internet for my MacBook but not both. Period. So, I can run my Airport wireless or my Netflix on TV but not both. I am somewhat techno impaired but in some of the discussions someone mentioned that you cannot have two IP addresses for one cable OR you cannot have one IP address and run NetFlix and surf the web on your laptop. The second seems absurd. In the very fine print, Samsung says that some IP's will not let you stream NetFlix. Does anyone know if that is true with Comcast? Comcast themselves didn't know (honest! - at least not the boiler plate email I got back said they didn't). It honestly starts to get funny when I go through all the set up online with my Samsung and then they give me a password to start streaming movies. BUT, to do this, I must disconnect my Samsung to get online with my laptop to plug in the password. By the time I do that, the password time has expired! LOL!! Besides, I don't even think it would work by the time I switched back to "live" NetFlix. So, I have all this stuff and I still can't watch a movie on TV.

I guess that there is 2 possibilities that I can think of.
One is that you are using a single IP address and only one device is getting it at any given time. However with a router I would not think that this is the issue. But just to be sure... I am assuming that the Netgear router's WAN/Internet port is connected to the Comcast modem. The Netgear router should be configured with it's DHCP services enabled. I am assuming that the AirPort Express (AX) is connected via Ethernet to one of the Netgear router's LAN ports. The AX should be configured to act as a bridge (not sharing a single IP address).
The other possibility is that the bandwidth is getting entirely consumed by the Samsung Blu-ray and the MacBook has no opportunity to get any data.

Similar Messages

How can I record a guitar and my voice (only voice with mic) at the same time ?, how can I record a guitar and my voice (only voice with mic) at the same time ?

how can I record a guitar and my voice (only voice with mic) at the same time ? I have one interface with Input 1 mic, Input 2 guitar, everything is working correct, but how can I activate multi recording or something like that... thanks

Set your inputs on your channel strips and make sure you have one set to input 1 and the other input 2. Arm the 2 audio tracks(the "R" in the track header. They will turn red and flash), then hit the record button.

Is it possible to listen to music through bluetooth and be on a call with earbuds at the same time?

Is it possible to listen to music through bluetooth and be on a call with earbuds at the same time?
I would like to be able to talk on my iPhone with the EarPods while playing music via Bluetooth in my car. Are there any third party products that will allow this?

Sorry, iOS will pause the music playback when you are on the phone call. You can set iOS to use bluetooth for your audo playback on your music app, and select the earpods for the phone app, but as soon as you answer the phone call, iOS will pause the music playback. This is a core OS feature, so you will not find any certified iOS app that will do what you want.
As a side note, please use extra caution when using your ear pods while driving. It is not safe as you may not hear emergency vehicles, car horns, railroad crossing bells, etc., and it is illegal in many states (in the US).

Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

Hi, i am wondering if i use 4g together with wifi in the same time will this increase the internet speed ?

The iPad has a micro-SIM card slot - nothing special or unique about it.
The iPad is not sold as carrier locked.

Stream music to two airports at the same time from my iPad2?

I found out from the apple-website that its possible to stream music to two(or more) of the new updated Airports from a computer at the same time .. can i do it from my iPad2 also? i want to build zones in my home and be able to use them one by one, or play music in several of them together at the same time.
I,m currently using the Spotify-app from my iPad2 or iPhone3GS to my existing(old one) Airport Express, and need to know if i can bye more Airports?
Thanks in advance
/Jonas from Sweden.

I found out from the apple-website that its possible to stream music to two(or more) of the new updated Airports from a computer at the same time .. can i do it from my iPad2 also?
Sorry, but no. This option is not supported on iOS devices.

Can A Mini Mac Stream Movies To 2 AppleTV's At The Same Time?

I was curious to know if I have a mini Mac running iTunes home sharing for the AppleTV if it was capable of streaming to 2 AppleTV at the same time?
I will be using it in conjunctions with an apple extreme wifi box and would like to be able to stream 2 different movies to 2 different AppleTV boxes.

OzziesMAC wrote:
I was curious to know if I have a mini Mac running iTunes home sharing for the AppleTV if it was capable of streaming to 2 AppleTV at the same time?
yes it can. i use a G4 mac mini and it does it fine.

Is there a way to stream/publish RTMP, HDS, and HLS at the same time?

Can I stream/publish all methods at the same time? I really want most users to play my live streams via RTMP, however, fail over to HLS for Apple iOS.

For your first problem, probably you need to insert something like this in your webpage to detect whether your webpage is being accessed from i-device or not..
if((navigator.userAgent.match(/iPhone/i)) || (navigator.userAgent.match(/iPod/i)))
deviceType = "iphone";
And it that is true, you may load following HTML in your video frame..
<head>
<body>
<center>
<video src="http://your-server:8134/hls-live/livepkgr/_definst_/liveevent/livestream1.m3u8" controls autoplay /> // HLS m3u8 url as src
</center>
</body>
</head>
otherwise if it Flash based device, load the osmf player .. with URL of .f4m (for HDS)
In case you want to serve on RTMP, load something like sample video player
sample index.html shipped with FMS in webroot folder may help you in this..

Can you manage a single library from two Pcs with iTunes at the same time?

Dear all,
I have a laptop and a desktop pc. Currently all my music and itunes are on the laptop. My laptop hard disk is filling up, so i want to move all the music off to the desktop. And yes i'd like to keep all the music in one location on the desktop pc. But ideally i'd like to be able to import new music to the library from both PCs, and also be able to modify the playlists and other details from both PCs. I looked at Sharing but that doesn't seem to let the non-owner to change the playlists....
Any ideas how i can set this up?
Thanks a lot, Dave

The AE has multiple ports that can be expanded using hubs that we can hopefully connect the existing 3 TV sources, and can receive / transmit to multiple computers but can it operate the iTunes, internet distribution, and TV output (with switching TV inputs via the iMac & AE Utility) at the same time or do we need multiple AEs and another computer?
The AirPort Extreme base station (AEBS) does not have a TV or video output.
The AEBS, just like any other router, supports multiple clients simultaneously. Of course there is always bandwidth limitations for any device. So in theory the AEBS can support all of that. In reality the performance of each service will depend on the bandwidth used by each and the bandwidth available. This is no different than any router.

HOW TO GENERATE FINITE AND CONTINUOUS PULSE TRAIN WITH USB6216 AT THE SAME TIME?

Hello.
I am using a USB6216 DAQ and need to generate a 20 kHz signal using the
ct0 output and at the same time I need to generate a finite number of
pulses, say 9, on a software trigger using the second counter output
ct1.
Currently, I have two VIs that can do this separately, but when I want
to integrate these into one single VI y get an error in the finite
pulse train for ct1 that indicates that the requested task is already
reserved. I am thinking this has to do with the fact that maybe both
types of task use the same timebase but I have not found the way to
solve this problem.
Any help would be very much appreciated.
Thank you.
Sincerely
JSL

Hello.
If anybody is interested, the problem is solved.
There is no resource confilct if I generate the 20 kHz continuous pulse
signal using the frequency out terminal, and this way I can use both of
my counters as I please with no problems.
It's kind of fun to answer one's own questions...
Sincerely
JSL

Streaming two or more flv videos at the same time

Hi,
I am working on a site that is intended to stream two or more flv simultaneously. The slightly different header clip should renew on entry to each page.
When I publish the fla file it plays as intended. When I upload the swf file to the web only one of the videos are playing back.
It does not matter if I import the video to a timeline, or stream it progressively from the server. Both clips are uploaded.
I am using CS3 and AS3.
http://www.doctorhoover.com/marcia/test7.html
Anyone??
ggaarde

Hi!!! hey dogHouseJim!! Could you please post a sample of your fourMovies.swf code to know how you do it?? It would be necessary for me to know how to do it. I'm working in an application that has got two flvPlayback components working at the same time but the main video pauses too many times because the other one is running too. Please help me!!! I post here my code (The main flv is croma_01intro ---> it doesn't work too far, I'm a beginner.. ) Thanks in advance for your help!!!!
---CODE---
import com.hagane.MHU.Timer;
var timeKeeper : Timer = new Timer();
video_tmp="flvs/croma_01intro.flv";
video_tmp2="flvs/presentacion720.flv";
var conexion2:NetConnection = new NetConnection();
var conexion:NetConnection = new NetConnection();
conexion2.connect(null);
conexion.connect(null);
var stream2:NetStream = new NetStream(conexion2);
var stream:NetStream = new NetStream(conexion);
mi_video2.attachVideo(stream2);
mi_video.attachVideo(stream);
stream.play(video_tmp);
//aseguramos 10 seg de reproduccion
stream.setBufferTime(4);
loadMovie("cargas.swf",cargas);
var n_veces = 0;
var prueba = 0;
this.onEnterFrame = function() {
//obtengo el porcentaje
var valor1:Number = Math.round(stream.bytesLoaded/stream.bytesTotal*100);
conexion1 = new LocalConnection();
conexion1.send("conectar", "estado_carga", valor1);
delete conexion1;
prueba = stream.time;
if ((valor1>=12)&&(prueba>=2)) {
delete this.onEnterFrame;
stream2.play(video_tmp2);
stream2.setBufferTime(15);
stream2.pause();
var intervalID_mc : Number = timeKeeper.intervalCall(2000, 0, lanzaEstadisticos);
n_veces = n_veces+1;
//funcion para saber que el flv termino
stream.onStatus = function(infoObject) {
    if (infoObject.code == "NetStream.Play.Stop") {
       //trace("video terminado");
    gotoAndPlay(25);
//if((infoObject.code=="NetStream.Play.Start")&&(n_veces==0)){
//stream2.play(video_tmp2);
//stream2.setBufferTime(4);
//stream2.pause();
//var intervalID_mc : Number = timeKeeper.intervalCall(5000, 0, lanzaEstadisticos);
//n_veces = n_veces+1;
function lanzaEstadisticos(Void):Void {
stream2.play(video_tmp2);
timeKeeper.clearIntervalCall(intervalID_mc);
stop();

How to fix wireless apple keyboard that ceased pairing with imac at the same time the keyboard on my ipad2 disappeared right after I updated osx vs. 10.8.5 sent out by Apple

I updated to OSX vs. 10.8.5 sent out by Apple on Oct 4,2013. My wireless
Apple keyboard is no longer paired to my imac and at the same time I noted that the keyboard on my ipad2 no longer exists. At first I thought it was an icloud issue but am wondering if anyone else has experienced this problem.

I downloaded 10.8.5 Supplementary and this time there was a picture of my keyboard with the suggestion that I power it on, which I did many times. Finally re-booted my imac and shut down BlueTooth on my ipad. I now have a keyboard back on the ipad and my wireless keyboard on the imac is working.

HT201412 I cannot activate my imessage and facetime and at the same time i cannot receive any notifications on my facebook.

Hi.I noticed that my imessage and facetime is not working and at the same time i cannot receive any notifications on facebbok.

Hi,
To exclude software conflict, i recommend you to make a clean boot and then have a test.
If this issue still persists, i suggest you re-built all COM ports through registry.
Locate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\COM Name Arbiter, delete ComDB key, reboot your computer.
Andy Altmann
TechNet Community Support

Can't print to ethernet and use airport at the same time

I have a Kyocera 6950 printer connected to my Powerbook via ethernet, this works fine (using bonjour). However as soon as I switch airport on and connect to a wireless network, jobs no longer goes to the printer and the Powerbook reports it can't find the printer.
So far I have tried:
1. changing the service order in the network control panel
2. deleting the printer and re-creating it, I can see the printer (via bonjour) and re-create it, but still not print to it.
This has happened at several different locations, anybody else had this or got any ideas. The problem started with Snow Leopard
Many thanks
Regards
Dave Hage

Thanks Greg,
I was wondering if maybe it needed to be on another subnet but there seems little information regarding setting up PostScript printers on ethernet and it was very late so I'd given up messing around with it all last night. I've got most addresses set manually, apart from Airport which is assigned by the router with different addresses permanently allocated to different computers etc. Not to worry! I have a Time Capsule to set up with my new Mac and will try with the printer attached to that. The silly thing is that it works fine with Airport switched on when attached to my older Mac Mini running Leopard, both direct through that computer or accessed from another one.
Can't have printers attached to my router as there's no room for them in the hallway where the router is connected to the internet. Some experimentation is in order now I think!

Using Huawei E220 and Airport at the same time?

I use a Huawei E220 USB-modem to connect to internet. I also have a Time Capsule with a wireless network, but it's not connected to internet.
When I acivate Airport to connect to Time Capsule, Internet Connection decides to overlook my Huawei connection and dub the AirPort network as my internet connection. Even if there is no internet there. How can I convince Internet Connection to use the Huawei for internet if it is connected?
I don't have this problem on my 10.5 MacBook. Thanks! Joachim

Use the options in System Preferences -> Network to set the service order (via the buttons in the lower left corner) such that the USB modem is above the AirPort interface. That way the OS will use that interface first while still using the AirPort to talk to the Time Capsule on its separate network.

Cannot use i2c and custom fpga logic at the same time

I am driving a OV7670 camera sensor with my myRio. Configuring the camera's registers is done via I2C (or they call it the SCCB interface, but it's practically the same thing). The sensors has to be given an external clock input which I do through the FPGA (I run it with an 8MHz signal). I can then do a parallel read (8-bits) from the chip into the FPGA on each clock in order to read off the pixel information, place it in a buffer and let the real-time side read it and manipulate it. The whole idea is to let the FPGA do the image acquisition while the processor does the image manipulation.
The only problem is, when I have my FPGA configuration loaded, the I2C bus seems to stop working. I know that the I2C is actually handled throught the FPGA as opposed to the processor. Is there anyway to run those two functions simultaneously on the FPGA? If not, can I somehow implement the I2C protocol independently of the FPGA?
Thanks in advance

Hey quickbacon,
I take it you're talking about using the built in I2C API for the myRIO. The myRIO comes preconfigured with a default FPGA personality, and the myRIO API is built off of that default personality - the default personality needs to be in place in order for it to function. By customizing the FPGA on your own, you've overwritten the personality, which is why the myRIO I2C VIs have broken.
If you want to use both the myRIO I2C VIs and customize the FPGA you can do so, but you need to modify the FPGA VI for the default personality instead of creating a new FPGA VI from scratch. To expose the FPGA VI that defines the default personality in a project, create a new project in LabVIEW and select the "myRIO Custom FPGA Project Template." Once you've created a project from that template, expand the FPGA target - the FPGA VI that's present under the target is the FPGA VI that defines the default personality. To add your own custom FPGA functionality, simply open that VI and add your functionality in parallel to the existing code. As long as you leave the code pertinent to the I2C VIs in place (it should be clearly labelled in the FPGA VI), the I2C VIs should still function. If you run into resource utilization problems, you can delete sections of code from the personality that deal with myRIO functions that you aren't using - just leave the code pertinent to I2C intact.
Regards,
Ryan K.

Cannot stream Netflix on TV with airport at the same time.

Similar Messages

Maybe you are looking for