Cannot submit the job "PSP: Create Distribution Lines"

Hello,
I am new to Labor Distribution and when I try to submit the job "PSP: Create Distribution Lines", I cannot pass any value for the parameter "Source Type" - it does not have any valid values (it is a table validated valueset).
Before trying to run this job, I ran the "PSP: Import Payroll Transactions from HRMS".
Could someone please guide me if I am missing any step in between?
Please advice.
Thanks,
Sagar

Duplicate thread (please post only once).
Cannot submit the job "PSP: Create Distribution Lines"
Re: Cannot submit the job "PSP: Create Distribution Lines"
Thanks,
Hussein

Similar Messages

Sharepoint 2010, InfoPath 2010 with Custom Workflow. Error Message: InfoPath cannot submit the form. An error occured while form was submitted...

I have created an InfoPath form that submits to a Sharepoint library with custom workflow attached. The workflow is initiated when the user submits the form. An email is sent to the supervisor who clicks the "Encoded Absolute URL" and approved
the form via the emailed form. Then, based on certain criteria the form is either emailed to the VP or the workflow is complete. The VP is sent an email and clicks the "Encoded Absolute URL" and sumbits the form via the emailed form. This is
how I would like it to work. The reality is, the form submits and is emailed to the supervisor and the supervisor is able to approve but when the form is sumbitted I get an error. The error is "InfoPath cannot submit the form. An error occured while
this form was being submitted. The form cannot be submitted to the following location: <URL> The file <URL> is checked out for editing by <me> The operation completed successfully." The operation did not complete successfully and it
is not checked out. I have read in previous posts that the file is locked. Since I am in the testing faze of the project there is no one else using the form. I have waited 24 hours and the lock has not been released. Please help!!! My deadline is growing short.

I ran into your post while having a similar issue. I don't have a 'full' fix for you, but I noticed at least in our case if you made sure you opened the Infopath form through the browser instead of the client Infopath program (use the drop-down menu
and open in browser) the error doesn't occur. Hope that helps some....

Error Happened at RFC Server Cannot Open the Job Batch File.

We have BW 7.0 and Data services 12.1. We are scheduling a Infopackage in BW that triggers a job in Dataservices server.
We had checked the connection between Dataservices source system in BW and RFC server on Dataservices side and these connections are good. on the 3rd party sellections tab in infopackage we specify the batch file name that we exported in Dataservices server. When we execute the infopackage we get the following error.
Error Happened at RFC Server Cannot Open the Job Batch File.
This error started occuring from yesterday and prior to that it was working fine. We are not understanding what changed in the system to cause this error.
Can anyone suggest any solutions for the above issue.
Thanks,
Naveen.

I'm not sure what the root cause would be here. Is the file still available ? Did file permissions change ? ...
But I wanted to point your attention to the fact that in Data Services/Data Integrator XI 3.2 (=12.2) we significantly enhanced the integration with BW. In XI 3.2, the RFC server is now integrated into the Data Services Management Console (so no need to start as a seperate executable) and you can start jobs from BW by just specifting the job's name in the repo (no need anymore to export execution commands to .bat files). So if upgrading to XI 3.2 is an option, things should go much smoother.
More details on the wiki : http://wiki.sdn.sap.com/wiki/display/BOBJ/Loading+BW
Thanks,
Ben.

Infopath cannot submit the form ?

I have infopath form in Infopath 2010, i have publish by choosing option Publish form to a sharepoint Library. It has been publish well.
I have made data connection for submit this form as a document file, it also got succed.
When i filling data and click to Submit option then i am getting following error message-->
InfoPath cannot submit the form.
An error occurred while the form was being submitted.
InfoPath cannot submit to the following location: http://testdev.gcgation.com/apps/LossPreventionIncidents/LossPreventionIncidents/Loss
Prevention
Incident-20121101203.xml
The form template has insufficient security privileges.
Access is denied.
What i have missed , is any fruitfull suggestion on the same?

Hello,
Is your InfoPath form is fully trusted. Please check once. You can set this to true from "Security and Trust" option.
Thanks! BR, Prasham http://prashamsabadra.blogspot.in/

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values)

Infopath cannot submit the form because it contains errors. Errors are marked with either a red asterik(required fields) or a red, dashed border (invalid values).
Press Ctrl+Shift+O for next error or Press Ctrl+Shift+I for error details
Please help me, Thank in advance.
Sravan.

Hi Sravan, this means that one or more of the fields are required to be filled in or have validation set up on them so that the information entered matches a certain criteria. Make sure what's entered matches what's required. If the form still can't be
submitted, check the rules set in InfoPath and the list/library to see what's causing the error(s).
cameron rautmann

Could not submit the request to create database 'Name'.

Hi,
I had pay-as-you-go subscription. After getting Bizspark subscription, I took backup of database and website. I disabled pay-as-you-go subscription.
When I tried to create MS SQL Server database, it is giving me "Could not submit the request to create database 'EutheniaDB'. Failed to create the database server." error.
When I am trying to create new Website with SQL Server database it is giving me same error. But when I create a new website without SQL Server it is creating successfully.
Does anyone have face similar problem? Am I forgetting something to configure?
Please help!
Regards,
Suraj Raut

Hi,
It could be an issue with your subscription.
I would request you to check with
Billing Support. There is no charge to it.
Regards,
Mekh.

How can I cancle the job that created by SGEN

Dear all,
How can cancle the job that created by SGEN. after i run the T-code SGEN. I have shutdown the server. But after i restart the Server, the job is dead. but can not be cancled by SM37. When i terminate the job in the SGEN it can not work too. any other way to cancle the job?
thanks!

Hi Michael,
PLease click on "CHECK STATUS" for this job in SM37 and check on "process ASAP".
Then if there is no BTC work process for this job running in SM50, then this job status will change from "running" to "cancelled".
Please try this and let me know the output.
Regards,
Hari Kishan

I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created.

I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created. It was only showing me an error message "EFI files are missing", I realized that it is trying to boot from the new partition I created for the installation of the linux I intended to do.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I cannot open the pages document created on my ipad when using my Mac. I've tried downloading the update but it needs Maverick. I've tried downloading Maverick and it fails.

I cannot open the pages document created on my ipad when using my Mac. I've tried downloading the update but it needs Maverick. I've tried downloading Maverick and it fails.

What OS version are you running?
Try the upgrade button here:
http://www.apple.com/osx/how-to-upgrade/

Cannot find the class to create it although it is there!

          Hi all,
          MyJsp.jsp file cannot find the "yy" class which I want to create in it. this file is located under weblogic\lib\cls.jar and I also tried to locate it under a directory which I define in weblogic.class.path.
          MyJsp.jsp is located under directly public_html.
          C:\weblogic\myserver\classfiles\jsp_servlet\_myjsp.java:78: Class jsp_servlet.yy not found in type declaration.
          probably occurred due to an error in /MyJsp.jsp line 13:
          <%yy myclass=(yy) request.getAttribute("z");%>
          <%String[] res=myclass.getResult();%>
          Mon Nov 13 02:36:20 PST 2000:<E> <ServletContext-General> Compilation of C:\weblogic\myserver\classfiles\jsp_servlet\_myjsp.java failed: C:\weblogic\myserver\classfiles\jsp_servlet\_myjsp.java:78:
          Class jsp_servlet.yy not found in type declaration.
          yy myclass=(yy) request.getAttribute("z"); //[ /MyJsp.jsp; Line: 13]
          ^
          C:\weblogic\myserver\classfiles\jsp_servlet\_myjsp.java:78:
          Class jsp_servlet.yy not found in type declaration.
          yy myclass=(yy) request.getAttribute("z"); //[ /MyJsp.jsp; Line: 13]
          ^
          2 errors
          Where should I locate that yy.class so that MyJsp.jsp's _myjsp.java does not look for it under its package name , just simply finds and creates it? :)
          Best regards
          jg


          Hi, there
          Wherever you put the class, you only set the classpath to the corresponding directory before you run your WL server. In your JSP file, set the import class tag, e.g:
          If your class directory is:
          weblogic\myserver\yy\yy.class
          you should add the directory to your classpath, and put the following tag in your jsp file:
          <%@ page language="java" import="yy" %>
          (Above assume your class has no prefix package name, or you should put full qualified class name)
          Cheers
          Oliver
          "jg" <[email protected]> wrote:
          >
          >Hi all,
          >
          >MyJsp.jsp file cannot find the "yy" class which I want to create in it. this file is located under weblogic\lib\cls.jar and I also tried to locate it under a directory which I define in weblogic.class.path.
          >MyJsp.jsp is located under directly public_html.
          >
          >C:\weblogic\myserver\classfiles\jsp_servlet\_myjsp.java:78: Class jsp_servlet.yy not found in type declaration.
          >probably occurred due to an error in /MyJsp.jsp line 13:
          ><%yy myclass=(yy) request.getAttribute("z");%>
          ><%String[] res=myclass.getResult();%>
          >
          >Mon Nov 13 02:36:20 PST 2000:<E> <ServletContext-General> Compilation of C:\weblogic\myserver\classfiles\jsp_servlet\_myjsp.java failed: C:\weblogic\myserver\classfiles\jsp_servlet\_myjsp.java:78:
          > Class jsp_servlet.yy not found in type declaration.
          > yy myclass=(yy) request.getAttribute("z"); //[ /MyJsp.jsp; Line: 13]
          > ^
          >C:\weblogic\myserver\classfiles\jsp_servlet\_myjsp.java:78:
          >Class jsp_servlet.yy not found in type declaration.
          > yy myclass=(yy) request.getAttribute("z"); //[ /MyJsp.jsp; Line: 13]
          > ^
          >2 errors
          >
          >Where should I locate that yy.class so that MyJsp.jsp's _myjsp.java does not look for it under its package name , just simply finds and creates it? :)
          >
          >Best regards
          >
          >jg

I cannot open the file I created today. It requires a new version!!!!

In the morning I created a new numbers's file. Now, whenI try to open it and receive the message:
There is no update available to my computer....

Hi spe,
Check to see that you are opening it in Numbers 3. Numbers 2.x is still on your computer. Wayne has a nice tip here:
Need newer version of Numbers to open file
Check it out.
quinn

How to find the job which created the session with errors ?

Hi,
I am going to transaction SM35 to see the sessions which has errors. Now if I want to see, what Job was responsible to create that session, how can I see that ?
Regards,
Rajesh.

hi Rajesh,
Refer to this code to create a session for the erroreneous records
REPORT ztest_report
NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZRASH.
*                 Internal Table Declarations                          *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
         KUNNR(10),
         BUKRS(4),
         KTOKD(4),
         ANRED(15),
         NAME1(35),
         SORTL(10),
         STRAS(35),
         ORT01(35),
         PSTLZ(10),
         LAND1(3),
         SPRAS(2),
         AKONT(10),
       END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
         KUNNR(10),
         EMSG(255),
       END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
         KUNNR(10),
         SMSG(255),
       END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
       V_TLINES LIKE SY-TABIX,
       "For storing total records processed.
       V_ELINES LIKE SY-TABIX,
       "For storing the no of error records.
       V_SLINES LIKE SY-TABIX.
       "For storing the no of success records.
*          Selection screen                                            *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
             V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
*          Start-of-selection                                          *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
*        TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
*          End of Selection                                            *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*&      Form form_uploadff
*     Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = LV_FILE
*     FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
*     HEADER_LENGTH                 = 0
*     READ_BY_LINE                  = 'X'
*     DAT_MODE                      = ' '
*   IMPORTING
*     FILELENGTH                    =
*     HEADER                        =
    TABLES
      DATA_TAB                      = IT_FFCUST
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
    DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
    DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM.                    " form_uploadff
*&      Form Form_bdcgenerate
*     Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
    PERFORM POPULATEBDC USING :
                                'X' 'SAPMF02D' '0105',
                                ' ' 'BDC_OKCODE' '/00' ,
                                ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                'X' 'SAPMF02D' '0110' ,
                                ' ' 'BDC_OKCODE' '/00',
                                ' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
                                ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                ' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
                                ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                'X' 'SAPMFO2D' '0120',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0125',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0130',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0340',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0360',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0210',
                                ' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0215',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0220',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0230',
                                ' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
    CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
    MESSAGES INTO IT_CUSTMSG.
    IF SY-SUBRC <> 0.
*--Populating the error records internal table.
      IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_ERRCUST.
      CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
      IF V_FLAG1 = ' '.
        PERFORM FORM_OPENSESSION.
        V_FLAG1 = 'X'.
      ENDIF.
*--Inserting the error records into already open session.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_INSERT.
      ENDIF.
*--Populating the Success records internal table.
    ELSE.
      IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_SUCCUST.
      CLEAR IT_SUCCUST.
    ENDIF.
*--Displaying the messages.
    IF NOT IT_CUSTMSG[] IS INITIAL.
      PERFORM FORM_FORMATMSG.
    ENDIF.
*--Clearing the message and bdc tables.
    CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
    PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM.                    " Form_bdcgenerate
*&      Form populatebdc
*       FOrm to Populate the BDC table.
FORM POPULATEBDC USING    VALUE(P_0178)
                           VALUE(P_0179)
                           VALUE(P_0180).
IF P_0178 = 'X'.
    IT_CUSTBDC-PROGRAM = P_0179.
    IT_CUSTBDC-DYNPRO = P_0180.
    IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
    IT_CUSTBDC-FNAM = P_0179.
    IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM.                    " populatebdc
*&      Form FORM_OPENSESSION
*       Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
   EXPORTING
     CLIENT                    = SY-MANDT
     GROUP                     = LV_SESNAM
     HOLDDATE                  = '20040805'
     KEEP                      = 'X'
     USER                      = SY-UNAME
     PROG                      = SY-CPROG
* IMPORTING
*    QID                       =
   EXCEPTIONS
     CLIENT_INVALID            = 1
     DESTINATION_INVALID       = 2
     GROUP_INVALID             = 3
     GROUP_IS_LOCKED           = 4
     HOLDDATE_INVALID          = 5
     INTERNAL_ERROR            = 6
     QUEUE_ERROR               = 7
     RUNNING                   = 8
     SYSTEM_LOCK_ERROR         = 9
     USER_INVALID              = 10
     OTHERS                    = 11
IF SY-SUBRC <> 0.
    WRITE :/ 'Session not open'.
ENDIF.
ENDFORM.                    " FORM_OPENSESSION
*&      Form FORM_INSERT
*       fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE                  = 'FD01'
*     POST_LOCAL             = NOVBLOCAL
*     PRINTING               = NOPRINT
*     SIMUBATCH              = ' '
*     CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = IT_CUSTBDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
IF SY-SUBRC <> 0.
    WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM.                    " FORM_INSERT
*&      Form FORM_CLOSESESS
*       Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM.                    " FORM_CLOSESESS
*&      Form FORM_FORMATMSG
*       Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
      ID        = SY-MSGID
      LANG      = SY-LANGU
      NO        = SY-MSGNO
      V1        = SY-MSGV1
      V2        = SY-MSGV2
      V3        = SY-MSGV3
      V4        = SY-MSGV4
    IMPORTING
      MSG       = LV_MSG
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS    = 2.
IF SY-SUBRC = 0.
    WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM.                    " FORM_FORMATMSG
*&      Form form_writeop
*       To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
           / 'No of Error Records :',V_ELINES,
           / 'No of Success Records :',V_SLINES,
           / 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM.                    " form_writeop

Cannot schedule the job at the time of AM when "multiple time a day"

Dear all,
I met this bug by the step below:
1/ open the Data Services Management Console
2/ select administrator.
3/ select the batch repository and click the "batch job configuration"
4/ select one job and select "add schedule".
5/ I choose the "Multiple times a day"
6/ and I select "AM" (default is PM)
7/ click "apply"
8/ I found that the time go back to "PM", which I have set into "AM".
Cannot I set the time as "AM"? is it a bug ?or by design?
Thanks.
Jeff.

what is the OS locale on which Management Console is running (tomcat) ? is it Japanese or Chinese
there was a issue fixed in 11.7.3.9 and 12.2.0.0
what is the version of DS you are using ?

Using FF ver 3.6.23 when trying to use a "Finish button" the java console provides error: document.forms 0 .submit and I cannot submit the document

document.forms[0].action=AWURL;
document.forms[0].elements["WWWACTION"].value='APPLY';
//12-1TEDHRQ - identify the action as legitimate, to avoid the warning popup
legitimateAction = true;
//12-1TEDHRQ - eof
document.forms[0].onsubmit();
formatHTML();
/* GIT remmed-out*/ //document.cookie = "AWIZ_PREVIEW_MODE=ON; domain=oraclecorp.com; path=/";
/* GIT Version */
document.cookie = "AWIZ_PREVIEW_MODE=ON; domain=oracle.com; path=/";
/* eof GIT Version */
// alert ('Cookie Set ' + readCookie('AWIZ_PREVIEW_MODE'));
document.forms[0].submit();
}

Your PHP script is not secured at all. I would recommend using Forms To Go (http://www.bebosoft.com/products/formstogo/overview) to create the PHP script.
The unregistered version can be used for free. It will get you up and running in no time.
In your HTML form,remove enctype="multipart/form-data" from this:
<form action="contactformprocess_original_db.php" method="post" enctype="multipart/form-data" name="form1" id="form1" target="ifr">
enctype="multipart/form-data" is only required if you have a file upload field in the form.

User in new group cannot see the attestation tasks created by systemadmin

I have created 2 attestation tasks a1 and a2 by logging in as xelsysadm .Now i created a new group admin1 and have assigned the menu items and also gave all 173 permissions.
I have assigned a user abc1 to that group and i have logged in through that user and when i click on the attestation i couldnt see a1 and a2
what should i need to do to make those attestations(a1,a2) visible to abc1.This abc1 should not be added as system administrator.
Edited by: user12180699 on Apr 28, 2010 7:19 AM

When you create the attestation event, there is an Administrative Group on the drop down as well as Process Owner group on the task itself.
Have you defined either of these for the user who you want to see the task?
-Kevin

Cannot submit the job "PSP: Create Distribution Lines"

Similar Messages

Maybe you are looking for