Cannot successfully collect files on AE CC on Mavericks 10.9.3

Cannot successfully collect files on AE CC 12.2.1.5 on Mavericks 10.9.3. The files are on a server and all living in one folder. When testing I do not have this error collecting files that are on my main drive or RAID. Is anyone else experiencing this?

I was experiencing this continuously. Maybe you have a different issue, but this may help.
My problem was that AE was always alerting me about missing footage, obviously the problem was not about missing footage, because in the Project Panel there was no missing footage (note that if this is happening After Effects stop the entire process, so copying the “missing footage” will not solve it. Also: When the Generating Report Only checkbox was active this error never occurred.
I figured it out that the real problem was about file names too long. Online I found some articles and discussion confirming that the problem should be because of characters file names, paths, folder structure, special characters, etc.
A clue come from the point Unicode conversion for robust support for characters (in file names, paths, etc.) of this old article: http://blogs.adobe.com/aftereffects/2013/04/whats-new-changed-after-effects-next.html
So to recap try to ensure that in your Project Panel none of the file names is too long (I don't know which is exactly the limit), is containing special characters, and try to simplify your folder structure.
In details I solved it following this steps (obviously the first three steps are to reduce, clean and simplify the project if it has a lot of files, folders and/or if it’s a complete mess):
Reduce Project selecting just the really needed compositions to get rid of what I don't need
Run the Project Cleaner script (http://aescripts.com/project-cleaner/) to get rid of redundancies and for a deep cleaning
Run the OrganizeProjectAssets script http://provideocoalition.com/dtorno/video/organize-project-assets-free-after-effects-scrip t - to simplify the folder structure
Manual double check to the file names
Collect Files
Hope this help.
Edit: Be careful when reducing and cleaning projects with expressions

Similar Messages

I cannot open .CR2 files - am using OS X Mavericks? The images were downloaded from a Canon 7D Mark III.

Hello,
My mother-in-law saved some pictures to my computer but I cannot open them in Lightroom or any other program that lets me edit them. They have a .CR2 extension and she uses a Canon 7D Mark III. Any tips? Thanks!

it's a special cannon file format
http://filext.com/file-extension/CR2
you will maybe require special canon software to open them
or you can try google
http://www.fileinfo.com/extension/cr2
more hits
open cr2 on mac

I cannot open various files in various folders using maverick?

How can I open various files in various folders after upgrading to Mavericks?

Now will you believe me ?

While loading site collection in SharePoint 2010, Error shows "Could not find the file or assembly or one of its dependencies. The system cannot find the file specified."

I have restored one web application in SharePoint Server 2010 from a different domain and can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
that "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
What may be the reason? Please help me to solve this issue since I am stuck up on this .
Regards
Mine1981

Hi Nico
Martens,
Thank you for your reply. But
how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
Please help me to solve the
issue.
Regards
Mine

I am setting up a lab of imacs in a school. I have successfully bound the imacs to our network and can log in using the windows account. However, I cannot access my files. Is there another step?

I am setting up a lab of imacs in a school. Our network is windows based using active directoy. I have successfully bound the imacs to our network and can log in using the windows account. However, I cannot access my files. Is there another step?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

CS6 AI Cannot open a file saved from CS5 AI

Had tried to save and rename the file and place in the local C: harddrive, filename only English letters. Doesn't work.
Had uninstalled completely the CS6 Master collection and CC cleaner tools and reinstall the CS6 again, but problem still there.
Using Win8.1 Pro 64bit desktop at home.
Acrobat X Pro can open the AI file !
I am going to reinstall back the old version CS5 Design Premium to keep my work going on.
Is there a solution for this problem up to now ?
Below are the message from the log file after clearner
Gen_WWCombined-en_US-20121017_1230
[Thu Feb 26 20:00:36 2015] Please enter (y) for Yes or (n) for No. ... >>
[Thu Feb 26 20:00:40 2015] Choose from one of the following options to clean up :
[Thu Feb 26 20:00:40 2015] 1. All
[Thu Feb 26 20:00:40 2015] 2. Adobe Flash Player 10.2
[Thu Feb 26 20:00:40 2015] 3. Creative Cloud 2014 , Creative Cloud & CS6 Products
[Thu Feb 26 20:00:40 2015] 4. Creative Cloud 2014 only
[Thu Feb 26 20:00:40 2015] 5. Creative Cloud only
[Thu Feb 26 20:00:40 2015] 6. CS6 only
[Thu Feb 26 20:00:40 2015] 7. CS5-CS5.5-CS6
[Thu Feb 26 20:00:40 2015] 8. CS5-CS5.5
[Thu Feb 26 20:00:40 2015] 9. CS3, CS4
[Thu Feb 26 20:00:40 2015] 10. Adobe Id credentials
[Thu Feb 26 20:00:40 2015] 11. Quit
[Thu Feb 26 20:00:40 2015] Choice :>
[Thu Feb 26 20:00:43 2015] User selected: All
[Thu Feb 26 20:00:43 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Thu Feb 26 20:00:43 2015] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Thu Feb 26 20:00:43 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\caps.db
[Thu Feb 26 20:00:43 2015] Orphan session will be removed : adbeadbeadbeadbeadbeadbeadbeadb
[Thu Feb 26 20:00:43 2015] ..
[Thu Feb 26 20:00:43 2015] Removing entries from the installer database
[Thu Feb 26 20:00:43 2015] Updated tsInstalled status to 0 for removal from 2 for installation in the table ribs_collection_paylaod for session adbeadbeadbeadbeadbeadbeadbeadb
[Thu Feb 26 20:00:43 2015] Updating installState
[Thu Feb 26 20:00:43 2015] Removing content of Product : AdobeColorVideoProfilesCS CS4, Version : 2.0
[Thu Feb 26 20:00:43 2015] Warning: Payload with ID : {4F3CE025-D60B-4E6B-8D39-B04CD3769008} does not have an InstallDir value. Deletion of patch files (if any) may not happen.
[Thu Feb 26 20:00:43 2015] Deleting the paylaod: {4F3CE025-D60B-4E6B-8D39-B04CD3769008} from the table ribs_payload and other associated tables for payloads
[Thu Feb 26 20:00:43 2015] Removing content of Product : AdobeColorVideoProfilesAE CS4, Version : 2.0
[Thu Feb 26 20:00:44 2015] Warning: Payload with ID : {8D71D024-447A-4B6F-A9CD-58443FFC43C4} does not have an InstallDir value. Deletion of patch files (if any) may not happen.
[Thu Feb 26 20:00:44 2015] Deleting the paylaod: {8D71D024-447A-4B6F-A9CD-58443FFC43C4} from the table ribs_payload and other associated tables for payloads
[Thu Feb 26 20:00:44 2015] Removing content of Product : AdobeColorCommonSetRGB, Version : 2.0
[Thu Feb 26 20:00:44 2015] Warning: Payload with ID : {AB8E4534-C573-4CC9-BA6A-76DD14055510} does not have an InstallDir value. Deletion of patch files (if any) may not happen.
[Thu Feb 26 20:00:44 2015] Deleting the paylaod: {AB8E4534-C573-4CC9-BA6A-76DD14055510} from the table ribs_payload and other associated tables for payloads
[Thu Feb 26 20:00:44 2015] Removing content of Product : AdobeMotionPicture CS4, Version : 2.0
[Thu Feb 26 20:00:45 2015] Warning: Payload with ID : {D798A6B1-4964-4B96-A032-3E29C8344C2F} does not have an InstallDir value. Deletion of patch files (if any) may not happen.
[Thu Feb 26 20:00:45 2015] Deleting the paylaod: {D798A6B1-4964-4B96-A032-3E29C8344C2F} from the table ribs_payload and other associated tables for payloads
[Thu Feb 26 20:00:45 2015] finished updating installState
[Thu Feb 26 20:00:45 2015] Deleting session: adbeadbeadbeadbeadbeadbeadbeadb from ribs_collection and other associated tables
[Thu Feb 26 20:00:45 2015] Updating caps schema pcd_meta to 2 if earlier version is less than 2
[Thu Feb 26 20:00:45 2015] ..
[Thu Feb 26 20:00:45 2015] Entries from the installer database have been removed
[Thu Feb 26 20:00:45 2015] Sessions folder will be removed.
[Thu Feb 26 20:00:45 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:45 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:45 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:45 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:45 2015]
[Thu Feb 26 20:00:45 2015]
[Thu Feb 26 20:00:45 2015] List of products installed on this machine
[Thu Feb 26 20:00:45 2015] Listing products for cleanup:
[Thu Feb 26 20:00:45 2015] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
[Thu Feb 26 20:00:50 2015] Are you sure you want to clean all the listed products and associated files?
[Thu Feb 26 20:00:50 2015] Type (y) to confirm and remove or (n) to quit ... >>
[Thu Feb 26 20:00:55 2015] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
[Thu Feb 26 20:00:55 2015] :: Cleaning-up left over inventories ::
[Thu Feb 26 20:00:55 2015] Inventory: 'uninstallts', Type: RIBS, Action: Delete
[Thu Feb 26 20:00:55 2015] Atleast one Non-RIBS Inventory : False, Atleast one AAMRef: False
[Thu Feb 26 20:00:55 2015] ::Start:: Removing AUM contents
[Thu Feb 26 20:00:55 2015] Deleting registry root:HKLM key:Software\Microsoft\Windows\CurrentVersion\Run value:AdobeAAMUpdater-1.0
[Thu Feb 26 20:00:55 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
[Thu Feb 26 20:00:55 2015] Deleting registry root:HKLM key:Software\Microsoft\Windows\CurrentVersion\Run value:ADOBE_UPDATER_STARTUP_UTILITY
[Thu Feb 26 20:00:55 2015] Exception during deleting key : (2, 'RegDeleteValue', 'The system cannot find the file specified.')
[Thu Feb 26 20:00:55 2015] Deleting scheduled task : AdobeAAMUpdater-1.0-SamHomePC-Sam
[Thu Feb 26 20:00:55 2015] Executing command: schtasks /delete /TN "AdobeAAMUpdater-1.0-SamHomePC-Sam" /F
[Thu Feb 26 20:00:55 2015] ERROR: The system cannot find the file specified.
[Thu Feb 26 20:00:55 2015] Deleting scheduled task : AdobeUpdater Task-SamHomePC-Sam
[Thu Feb 26 20:00:55 2015] Executing command: schtasks /delete /TN "AdobeUpdater Task-SamHomePC-Sam" /F
[Thu Feb 26 20:00:55 2015] ERROR: The system cannot find the file specified.
[Thu Feb 26 20:00:55 2015] ::Finish:: Removing AUM contents
[Thu Feb 26 20:00:55 2015] ::Start:: Removing OOBE
[Thu Feb 26 20:00:55 2015] Executing command "taskkill /F /FI "IMAGENAME eq AAM Updates Notifier.exe""
[Thu Feb 26 20:00:55 2015] INFO: No tasks running with the specified criteria.
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] ::Finish:: Removing OOBE
[Thu Feb 26 20:00:55 2015] Removing content of Product : CS5Installer, Version : CS5
[Thu Feb 26 20:00:55 2015] Deleting file : C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Thu Feb 26 20:00:55 2015] File does not exist: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] LOG FILE SAVED TO: C:\Users\Sam\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
[Thu Feb 26 20:00:55 2015] Adobe Creative Cloud Cleaner Tool completed successfully
[Thu Feb 26 20:00:55 2015]
[Thu Feb 26 20:00:55 2015] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
[Thu Feb 26 20:00:43 2015] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Thu Feb 26 20:00:45 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:45 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:45 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:45 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] Warning: Failed to remove file,folder trying again
[Thu Feb 26 20:00:55 2015] Warning: Failed again to remove file,folder
[Thu Feb 26 20:00:55 2015] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
[Thu Feb 26 20:00:55 2015] ---------------------------------------------------------
[Thu Feb 26 20:00:55 2015] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
[Thu Feb 26 20:00:55 2015] ---------------------------------------------------------

Hi Peter,
I'm guessing it might have been a network corruption problem. She brought in her laptop, we made another .idml file and loaded it to a USB stick, then transferred it to my computer. The file opened just fine. And yes, she had pasted all her images, so we have her collecting the bits and pieces for me to review and relink everything. I believe I have the patch, but will double-check. Thanks!

ORA-20100 The system cannot find the file specified 0RA-06512

I can create and deploy a .NET stored procedure but when I run it either from Visual Studio 2005 Oracle Explorer or TOAD or SQLPlus I get the following:
ORA-20100: The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_CLR", line 211
ORA-06512: at "PROD.GETSEGADDRNO", line 7
ORA-06512: at line 1
It is basically the same C# code as the OTN sample except for accessing a table in my database.
I found a forum thread dated 2006 with basically the same error message and it said the problem was fixed in Oracle Database patched to 10.2.0.2 but I can't find such a patch for 10g R2 Enterprise.
This is my first time setting up Server 2003, Oracle 10g and ODT for .NET
(I successfully created and deployed an external procedures for Oracle 8.1.7 on Windows 2000 a couple of years ago)
This is the code:
using System;
using System.Collections.Generic;
using System.Text;
using System.Data;
// use the ODP.NET provider
using Oracle.DataAccess.Client;
using Oracle.DataAccess.Types;
namespace CLRLibrary1
// Sample .NET stored function returning address number (ADDR_NO) for
// a given segment number (SEG_NO)
public class Class1
public static int GetSegAddrNo(int segno)
int addrno = 0;
// Check for context connection
OracleConnection conn = new OracleConnection();
if (OracleConnection.IsAvailable == true)
conn.ConnectionString = "context connection=true";
else
throw new InvalidOperationException("context connection" +
"not available");
conn.Open();
// Create and execute a command
OracleCommand cmd = conn.CreateCommand();
cmd.CommandText = "SELECT ADDR_NO FROM SEG WHERE SEG_NO = :1";
cmd.Parameters.Add(":1", OracleDbType.Int32, segno,
System.Data.ParameterDirection.Input);
OracleDataReader rdr = cmd.ExecuteReader();
if (rdr.Read())
addrno = rdr.GetInt32(0);
rdr.Close();
cmd.Dispose();
conn.Close();
return addrno;
} // GetSegAddrNo
} // Class1
} // CLRLibrary1
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
was installed from the Oracle downloads site: 10201_database_win32.zip
On Windows Server 2003 R2 Standard Edition SP2
Oracle .NET tools was installed using: ODTwithODAC1020221.exe
The CLR Service is running
Deployment says that it is successfull.
The DLL is in the expected Oraclehome\BIN\CLR folder
The deployment script is:
CREATE OR REPLACE LIBRARY "SYS"."ORATEST6_DLL" AS '$ORACLE_HOME\bin\clr\OraTest6.dll';
GRANT EXECUTE ON "SYS"."ORATEST6_DLL" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLR" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLRTYPE" TO PROD;
GRANT EXECUTE ON "SYS"."DBMS_CLRPARAMTABLE" TO PROD;
CREATE OR REPLACE FUNCTION PROD.GETSEGADDRNO wrapped
a000000
1f
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
abcd
8
147 138
ePHIr6kvu6nZ9gYrxgs40akg18owg1zQf/ZqZ3QC2vjqaIs25soMp1nBmBfBj1ZboVvNkdPT
8qhpuEVdmv4n2nlF5ynrhLsm3F0h9ZGrTQ4tGYIybWjMFxYNlDDeBOx1i7O0GviP8AxHys23
kW8aTVA2xV8IuLNlwP7KWFw70tGbg+lUIlRhYo5WmLW6N9wcjOCeLZK6W6s6tvd4zKAQykzc
sIsaneE0FWyV9Q1BD0yJpLoCfWH+f6fVXsne5Feyxu68k5geCJ8F5FCLm2ycvxIiKNKTIpiD
q4wshbsYLTTPHX3F6pA=
The parameter mapping is:
return value int32 number
segno int32 number
Bob Sorrell
[email protected]
863-662-5524

These are the Reference Properties for Oracle.DataAccess in the OraTest6 app:
Aliases: Global
Copy Local: False
Description: Oracle.DataAccess.dll
File Type: Assembly
Identity: Oracle.DataAccess
Path: c:\oracle\ora102\odp.net\bin\2.x\Oracle.DataAcess.dll
Resolved: True
Runtime Version: v2.0.50727
Specific Version: False
Strong Name: True
Version: 2.102.2.20
This is what GacUtil shows:
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.DataAccess, Version=1.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Number of items = 2
The GAC seems to contain both 2.102.2.20 and 1.102.2.20
Do I need to remove one?

Excel Automation with Interop - Windows Service - Microsoft Excel cannot access the file

I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
the following error when trying to open the excel file:
Unhandled exception Occured : 'Microsoft Excel cannot access the file 'bla.xls'. There are several possible reasons:
The file name or path does not exist.
The file is being used by another program.
The workbook you are trying to save has the same name as a currently open workbook.'.'
The code snippet used to open the file:
xlApp = new Application();xlApp.Visible = false;xlApp.UserControl = false;xlApp.Application.ScreenUpdating = false;xlApp.DisplayAlerts = false;xlWorkbook = xlApp.Workbooks.Open( Filename: filePath, UpdateLinks: 2, IgnoreReadOnlyRecommended: true, Editable: false);
The console app and windows service are running on a Win Server 2008 64-bit OS with Excel 2013 32-bit installed. The service is running with a special user account, which has all the right permissions on accessed files and folders. The excel process is also
started with the same account (I cheched that one).
I already tried to do the following, but to no avail:
Run excel.exe /automation -> worked fine
Created the folders and also gave full control to the account under which the service is run (even gave full control to Everyone)
C:\Windows\SysWOW64\config\systemprofile\Desktop
C:\Windows\System32\config\systemprofile\Desktop
Configured DCOM
Excel Application -> Identity -> Specific user account
Excel Application -> Identity -> Interactive User
Excel Application -> Security -> Launch permissions -> Everyone full control
Several combinations of the above
So I really am stuck with this problem right now. Any input on this is appreciated.

I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
the following error when trying to open the excel file
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office
may exhibit unstable behavior and/or deadlock when Office is run in this environment.
If you are building a solution that runs in a server-side context, you should try to use components that have been made safe for unattended execution. Or, you should try to find alternatives that allow at least part of the code to run client-side.
If you use an Office application from a server-side solution, the application will lack many of the necessary capabilities to run successfully. Additionally, you will be taking risks with the stability of your overall solution.
You can read more about that in the
Considerations for server-side Automation of Office article.

Cannot delete exe files - The action can't be completed because the file is open in Windows Explorer

We have received 3 new computers with Windows 8.1. All of us 3 have the same problem: we cannot delete exe files with message "The action can't be completed because the file is open in Windows Explorer"
For example, I download skypeinstall.exe on desktop, install the program correctly and then try to delete the file: file is in use by Windows Explorer, cannot be delete.
We reboot computer, we are able to delete the file. But, if I restore the file from the recycle bin on the desktop, I cannot delete it again until I reboot the PC. I used ProcessExplorer to see what is locking it and I can see 5 instances of explorer.exe
locking the file.
I can always reproduce the same way:
1-Reboot
2-Delete exe file
3-Restore file
4-Delete stop working and 5 explorer.exe handle are locking it.
I have tried the following so far after reading multiple threads:
- De-activating Windows Search service
- Activating User Experience service
- Deleting from command prompt (no success)
- In folder options: inactivate display icon on thumbnail and activate always display icons, never thumbnail
- Changing folder view (contents, detail, small icons...)
- Using Lock Hunter - not working until reboot
None of these worked.
We all have Windows 8.1 with Crucial SSD drive, could the problem be linked with the SSD drive incompatibility?
Any help would be appreciated.

Hi,
Please try to make a clean boot for your system, then check if this problem resolved.
Clean Boot: http://support.microsoft.com/kb/929135
If problem persists, try to open Resource Monitor to check handle of Explorer.exe, if there any exception, end them for test.
Roger Lu
TechNet Community Support

Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
     Inherits System.Web.UI.Page
     Private objOpenFilesreport As OpenFilesReport
     Private rptOpenFiles As ReportDocument
     Private strLastErrorMessage As String = Nothing
     Private errLastException As Exception = Nothing
     Dim strFileKey As String
     Dim strJurisdictionCode As String
     Dim strStaffId As String
     Dim strReportId As String
     Private Sub ConfigureCrystalReports()
          Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
          Dim rptopenfiles As New ReportDocument
          rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
          Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
          ConnectionInfo.DatabaseName = my database
          ConnectionInfo.UserID = login id of user
          ConnectionInfo.Password = user's password
          SetDBLogonForReport(ConnectionInfo, rptopenfiles)
          CrystalReportViewer1.ReportSource = rptopenfiles
     End Sub
     Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
         ConfigureCrystalReports()
     End Sub
     Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
          Dim myTables As Tables = myReportDocument.Database.Tables
          For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
               Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
               myTableLogonInfo.ConnectionInfo = ConnectionInfo
               myTable.ApplyLogOnInfo(myTableLogonInfo)
          Next
     End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
   CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
   CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
   CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
   CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
   CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Office 365 App using NAPA - "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)"

Hello,
I am creating an app using NAPA tool in Office 365. I am trying to "Add an attachment" to a custom list item using SPServices. When I am using my code (jquery code) in content editor web part on a page, its working fine, but when I am adding
the same code in an app, its giving me error : "The system cannot find the file specified. (Exception from HRESULT:
0x80070002)" - 500 Internal Server error.
(function () {
// This code runs when the DOM is ready and creates a context object which is
// needed to use the SharePoint object model
$(document).ready(function () {
//alert('In doc ready');
$('.attachmentButton').change(function(event){
var listName = 'UploadTest',
itemId = 2;
handleFileChange(listName,itemId,event.target.files);
function handleFileChange(listName,itemId,files){
alert('In handleFileChange :=' + listName + "" + itemId + "" + files[0]);
alert('files.length :=' + files.length);
var filereader = {},
file = {},
i=0;
//loop over each file selected
for(i = 0; i < files.length; i++) {
alert('In for loop');
file = files[i];
filereader = new FileReader();
filereader.filename = file.name;
alert('filereader.filename :=' + filereader.filename);
filereader.onload = function() {
var data = this.result;
var n=data.indexOf(";base64,") + 8;
//alert('n :=' + n);
//removing the first part of the dataurl give us the base64 bytes we need to feed to sharepoint
data= data.substring(n);
//alert('data :=' + data);
alert('Above SPServices this.filename :=' + this.filename);
$().SPServices({
operation: "AddAttachment",
listName: listName,
asynch: false,
listItemID:itemId,
fileName: this.filename,
attachment: data,
completefunc: function (xData, Status) {
console.log('attachment upload complete',xData,status);
alert('Status :=' + Status);
if (Status.toLowerCase() == "error"){
alert(xData.responseText);
alert(xData.status);
alert(xData.statusText);
filereader.onabort = function() {
alert("The upload was aborted.");
filereader.onerror = function() {
alert("An error occured while reading the file.");
//fire the onload function giving it the dataurl
filereader.readAsDataURL(file);
alert(xData.responseText); - gives error - " "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)""
alert(xData.status); - gives error - "500"
alert(xData.statusText); - gives error - "Internal server error"
Server Publishing infrastructure and Server publishing features are activated on site collection and site respectively.
Any suggestions, why I am getting this error in NAPA ?

Hi,
According to your post, my understanding is that you have an issue about adding attachments to list items in app.
To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
There are two articles about retrieve the list and list items in the host web, you can refer to them.
http://www.dotnetcurry.com/showarticle.aspx?ID=1028
http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
What’s more, we can also use the REST API to achieve the same scenario.
http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

I cant figure out what is wrong i keep getting this an OIEception that says "{"The process cannot access the file because it is being used by another process."}

I am trying to move a file from a folder to another folder.
here is my code:
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Test Pictures");
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Test Test";
File.Move(folderContentNames[1], destinationFile);
updateListBoxFileName();
updateImageBox();
each time I hit the bolded underlined part I get that error message.
if you need anything else just ask.
Thanks in advance,
Thor Orb

Hi Thor,
If you want to move a file from a folder to another folder, I think you could get the sourcePath and TargetPath. The code below shows a simple demo:
string[] folders = Directory.GetFiles(@"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test");
string desFile =Path.Combine( @"D:\Test\VSC#\01\WindowsFormsApp\WindowsFormsApp\Test - Copy\"+Path.GetFileName(folders[1]));
File.Move(folders[1], desFile);
In addition, the link below might be useful to you:
# How to: Copy, Delete, and Move Files and Folders (C# Programming Guide)
>> The process cannot access the file because it is being used by another process
The message seemed that the file was opened in other process. Did you operate the file with other code?
I think you could check if the files and the folders were opened, and review your codes if they were used in other places.
If you have any further questions, please feel free to post in this forum.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.
Ya, Thanks I figured about the path and destation. yes I am using the file in another area, the file is an image jpg and I am displaying it in a picture box. Now I have been doing a little research I see a command called Dispose() and this is suppose to
release the handle on the image, but I can seem to figure out have to use it correctly.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Collections;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.IO;
namespace Scanned_Picture_Ogranizer
public partial class Form1 : Form
//storage of the all files
string[] folderContentNames = Directory.GetFiles(@"C:\Users\Jonah\Desktop\Scan Project Testing\Test Pictures", "*.jpg");
//List<string> folderContentList = folderContentNames.ToList();
private List<string> folderContentList = new List<string>();
Bitmap currentImage;
Bitmap placeHolder;
public Form1()
InitializeComponent();
convertingArrayToList();
startUpData();
string sourceFile = @"C:\Users\Jonah\OneDrive\My Programming Projects\Scanned Picture Organizer Project\Test Pictures";
string destinationFile = "";
private void moveButton_Click(object sender, EventArgs e)
private void startUpData()
//placeHolder = new Bitmap(folderContentList[0]);
//currentImage = (Bitmap)placeHolder.Clone();
// Image loadImage = new Bitmap(pictureClones[0]);
// currentFilePictureBox.Image = loadImage;
int numberOfFilesLeft = folderContentNames.Length;
foreach (string name in folderContentNames)
fileNamesListBox.Items.Add(name);
fileNameTextBox.Text = folderContentNames[0];
numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
///loadImage.Dispose();
//FileStream currentImage = new FileStream(folderContentList[0], FileMode.Open, FileAccess.Read, FileShare.ReadWrite);
private void convertingArrayToList()
foreach (string listName in folderContentNames)
folderContentList.Add(listName);
private void selectingImageFromListBox()
private void updateImageBox()
Bitmap currentImage = new Bitmap(folderContentList[0]);
currentFilePictureBox.Image = currentImage;
currentImage.Dispose();
private void updateListBoxFileName()
fileNamesListBox.Items.RemoveAt(0);
fileNameTextBox.Text = folderContentList[0];
// numberOfFilesLeftTextBox.Text = numberOfFilesLeft.ToString();
private void historyPictureBox_Click(object sender, EventArgs e)
destinationFile = @"C:\Users\Jonah\Desktop\Scan Project Testing\Test Test\";
File.Move(folderContentList[0], destinationFile + System.IO.Path.GetFileName(folderContentList[0]));
folderContentList.RemoveAt(0);
updateImageBox();
updateListBoxFileName();
when I first start the program the first picture displays, but when I trigger historyPictureBox_Click(), it does that error again. Another things is that I already looked at that link and it didn't help.
I just super confused, I would like your help on this.
Thanks,
Thor Orb

Backup stopped before completing. The process cannot access the file because it is being used by another process

I am working with a client who is attempting to backup to a NAS device
The device is a linksys NSS6000 (Cisco device).
It’s a dual 1Gbit LAN device that supports CIFS / FTP and NFS transfers. It has only 1Gbit lan connected.
The device has 4 * 500 gb sata drives in raid 1 attached.
Cables go from cat 5 to fiber back to cat5. (The NAS is located at a neighboring office) The switches are 1gbit.
Server is a win2k8r1 fully up to date.
When backing up to the NAS device, the following error occurs:
Running backup of volume Local Disk(D:), copied (86%).
Running backup of volume Local Disk(D:), copied (90%).
Running backup of volume Local Disk(D:), copied (94%).
Running backup of volume Local Disk(D:), copied (98%).
Backup of volume Local Disk(D:) completed successfully.
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The process cannot access the file because it is being used by another process.
If we redirect the backup to a folder on a 2008 share, the backup completes successfully.
Only when backing up to the linksys NSS6000 does the error occur.
No other backup processes are writing to the NAS device so I can't understand why the process thinks the file is
being used by another process.
One thing we did notice that when the backup to the NAS device occurs, throughput is about 150 mbit average
On the 2008 server shares we successfully backup to, the through put is 500 mbit. Not sure if that is important, but
might be worth mentioning.
The following event log entry was noted at the end of the backup.
The description for Event ID '519' in Source 'Microsoft-Windows-Backup' cannot be found.
The local computer may not have the necessary registry information or message DLL files to display the message,
or you may not have permission to access them. The following information is part of the
event:'2009-05-12T10:13:31.617Z', '', '2147942432', '%%2147942432'
Any ideas?
Thanks..Michael

I am also seeing the same problem backing up nightly to a brand new NAS device (WD My Book Live)
All the error codes are the same as those in this thread.
From Windows Event Viewer:
The backup operation that started at '‎2011‎-‎03‎-‎25T06:00:19.811302700Z' has failed with following error code '2147942432' (The process cannot access the file because it is being used by another process.). Please review the event details
for a solution, and then rerun the backup operation once the issue is resolved.
Fault bucket 659897467, type 5
Event Name: WindowsBackupFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: Backup
P2: 6.1.7600
P3: 0x80070020
P4: 7
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Logs\WindowsBackup\WindowsBackup.1.etl
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Analysis symbol:
Rechecking for solution: 0
Report Id: dd480bf2-56a6-11e0-ae81-00217099bf56
Report Status: 0
From Report.wer in C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Version=1
EventType=WindowsBackupFailure
EventTime=129455071508181139
Consent=1
UploadTime=129455071508201140
ReportIdentifier=dd480bf2-56a6-11e0-ae81-00217099bf56
Response.BucketId=659897467
Response.BucketTable=5
Response.type=4
Sig[0].Name=Operation
Sig[0].Value=Backup
Sig[1].Name=AppVer
Sig[1].Value=6.1.7600
Sig[2].Name=HRESULT
Sig[2].Value=0x80070020
Sig[3].Name=TargetType
Sig[3].Value=7
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=659897467/nBucketTable=5/nResponse=1/n
FriendlyEventName=WindowsBackupFailure
ConsentKey=WindowsBackupFailure
AppName=Windows host process (Rundll32)
AppPath=C:\Windows\System32\rundll32.exe
ReportDescription=Windows Backup failure

Help - "Acrobat is being used by another application and cannot open PDF files until the other application is closed."

Hello,
I searched this site and google for this error terminology and come up dry. I support a user who has been for years using Acrobat 5 (yes, I know...) to read files in a client DB program, as well as other PDF files on their PC. In the last week or so, they have started gatting this error "Acrobat is being used by another application and cannot open PDF files until the other application is closed." any time they attempt to open a PDF file attached to an email (via Outlook).
It is my understanding that they cannot upgrade to a newer version of Acrobat because of limitations of their client software, but had not previously had any issues viewing PDF notes from the DB, and PDF attachments in their email.
I have tried uninstalling and re-installing, as well as tried using Adobe Reader 7 & 9 in conjunction with Acrobat to try to get around this issue, but have not been successful.
Any ideas?
Thanks,
Jesse

I don't have an answer to your technical problem. The product I assume is Acrobat that you are talking about (based on the post title), Adobe is the company name. This is a good place to ask questions on Acrobat if folks can figure out what you are talking about. They will ask for the product version number (like AA9.3.3), operating system, and other applications if appropriate. Also, just what you are doing that generates the message.
As for Adobe, you are not likely to get an answer from them here in the user forum. You will be lucky if you can get an answer if you can contact them and not be on hold for more than an hour (sorry, this is why a lot of folks end up in the forum).
So, to help others try to answer your question, what are the products and versions involved? What OS? What are you doing when the message comes up.

Cannot successfully collect files on AE CC on Mavericks 10.9.3

Similar Messages

Maybe you are looking for