Cannot superimpose graphic over clip of live action

I did this before so I know I am missing something.
I am trying to superimpose a LiveTitle graphic over a live action clip. I keep getting the prompt that I cannot due the edit and to check my video tracks. I am trying to slow down the speed of the LiveType graphic clip and it does not seem to be working. Anyone have any ideas on how I can solve these two problems? Thanks.

You slow down the LT animation inside the LT project. Stretch out the animation and make the text longer. Import the LT project inti FCE and drag it from the browser into the timeline onto the track above your video.

Similar Messages

  • Cannot update graphics card BIOS, MSI Live upate 6 will not work.

    Live update 6 does not support "MSI Radeon R9 280x Gaming 6G" graphics card.
    Live update 6 does not run.
    Even tried mass loading Live update 6 to the point it had 800+ "Live Update.exe 32*" processors running in task manager and they soon disappeared 20 seconds later.
    No UI.
    No Error message.
    If the program is not running it is clear it does not support any of the hardware in my system including "MSI Radeon R9 280x Gaming 6G".
    As a result I cannot update to latest BIOS for my graphics card.
    Operating system: Windows 7 64bit (last update 05/09/2014 6 days ago)
    CPU: AMD A8-6600k APU @ 4.60GHz
    RAM: 8GB Dual channel Crucial Ballistix Tactical Tracer DDR3 1866MHz CL9
    Motherboard: Asrock FM2A88M Extreme4+
    GPU: MSI Radeon R9 280x Gaming 6G
    GPU details:
    Am I required to have an MSI motherboard to be eligible for a graphics card BIOS update?
    The reason why I seek this is because the entire line of R9 200 series graphics cards are plagued with screen flickering due to ULPS. BIOS updates for other vendors of the card; "Gigabyte", "Asus" etc have been reported to fix the monitor flicking ULPS causes however since I have an MSI GFX card I cannot use Gigabyte and Asus BIOS updates.
    I no longer have the flickering issue due disabling ULPS and overclocking the graphics card however it's causing the card to operate at a constant 48 degrees and chew power.
    With the overclock values and stress testing it with Unigine Heaven Benchmark 4.0 (extreme preset) the card reaches a max of 74 degrees over the course of stress testing for 4 hours.
    But I would like to be able to have my card at factory clock settings with ULPS without the flickering and I'm wanting to see if the staff at MSI are fully aware of the bug in their product line and if the latest BIOS version for the graphics card would fix the issue.

    No but live update is flakey at best and i wouldn't trust it.... (seen far to many problems with it)
    if you want a Updated VBIOS if one is available please supply these 2 things and then one of the other mods will be able to get you what is needed!
    1: Serial number of your card (leave off the last 3 digits and then there is no unique information about your card as the rest is all just manufacture data to all the cards from that batch)
    2: click the little icon to the side of your BIOS version number and save a copy of the VBIOS to a file and uplaod it to somewhere and give us a link to the file... (use somewhere like Dropbox)
    once we have those 2 pieces of information someone here will be able to get one if Available for your card

  • Can I edit/add graphics and effects to Live footage?

    Ok-
    I know most people use FCP to edit, previously captured footage.
    But what I'm interested in knowing is something along the lines of:
    How does ESPN put graphics on their live footage of a NFL game which is then broadcasted via TV.
    Or
    How does the News put graphics over it's live footage?
    I know this is a broad topic but can FCP do anything like this?
    I have an opportunity to work with a smal scale local video production company that is broadcasting live video footage via the internet but they want to be able to incorporate graphics and some effects into the video.
    They already have the production in place and going (camera crew, director monitoring all cameras and footage, equipment, and server) It works really well, But they've never been able to incorporate graphics.
    How is this done? Anyone here know? Thanks.

    How does ESPN put graphics on their live footage of a NFL game which is then broadcasted via TV.
    Or
    How does the News put graphics over it's live footage?
    With what are called SWITCHERS...or...some other technological term that I know Zebulun knows what it is called. Since he works in live sports broadcasting. Stuff designed for live TV. Used to be called a Chyron or CG (character Generator)...
    I know this is a broad topic but can FCP do anything like this?
    Nope...it is a NON-LINEAR editor...NOT a live switcher. Not at all what it is designed for.
    Google man...
    http://www.masternewmedia.org/videointernettv/live-video/broadcast-live-tv-online-with-mogulus-20070521.htm
    Shane

  • How to add live action video to the timeline in Adobe Flash CS5?

    Hi, I want to make an animation over live action footage, I've looked on the guides and the ones which explain what I need to do are for previous versions of Flash and don't work on CS5.
    I'm wondering how I can import a video in to Adobe Flash CS5, so that it plays in the timeline frame by frame? I dont mean putting it on one frame so it will play, but so i can edit objects over the top of the flash in each single frame
    Thanks.

    So are you saying that you cannot embed the video directly into the main timeline (I don't use CS5) as you could with earlier versions?
    Overall I wonder if you are using the wrong tool for the job. Flash is not a video editor and attempts to use it as such often fall short. Adobe After Effects or even a simple video editor may work better:
    http://www.adobe.com/products/aftereffects.html
    If that is not an option... how about
    .... embed video directly into main timeline... or
    ... convert video file to .swf, then import .swf... extending timeline as needed..... or
    ... if vid is short, do frame grab for each frame, save as bitmap, import the series of bitmaps, place them on layer below animation... or
    but to keep the video synced to the animation, you'll need to set the Flash doc frame rate to exactly the same as the original framerate of the video. For example, if shot in mini-dv format, the frame rate of the video is 29.97 so the Flash doc frame rate would need to be 29.97 also.
    Best of luck,
    Adninjastrator

  • Can I video capture 'live action' from Viewer screen ...

    Can I capture 'live action ' video as it appears on the 'viewer screen' in iMovie as I move the cursor across the 'source video' clips. Does iMovie allow me to record this 'action' to hard drive ?? ... Suggestions greatly appreciated.

    it is this 'rapidly changing 'still' images' as it appears in the 'viewer' that I want to record.
    You could use a screen capture application like Snapz ProX to capture the "preview" window as it is either playing or being "scrubbed." On the other hand, if you have QT Pro, you could also export the original source clip as a sequence of still images (image frequency can be selected by the user) to a folder and then simply open the "Image Sequence" using QT Pro to create a motion clip with a user selected frame rate for viewing. This approach would provide a more even playback than a screen capture of a "scrubbed" playback which depends on how fast and steadily you "scrub" the file.

  • (1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elem

    (1) Is there any way that I can get the transition menu to remain on the screen. I select a transition, drag it to the timeline and after I click done I have to start the process all over to perform this action on the next transition. I have premiere elements 12. In older version the menu would stay on the screen.
    (2) In pan and zoom how can start zoom on a photo in the original picture and zoom in and the next picture zoom out and the next photo pan from right to left and the next photo pan left to right.
    Thanks
    Sam

    TidyCup
    What computer operating system is your Premiere Elements 12 running on? If you have not already, be sure to update 12 to 12.1, using an opened project's Help Menu/Update.
    But to the immediate questions, assuming Windows 7, 8, or 8.1 64 bit....
    1. No, it is what it is. But, are you applying the same transition each time? If so, then highlight/select all the clips involved (all at one time), then Timeline Menu/Apply Default Transition will do just that for the highlighted/selected clips.
    To highlight/select more than one clip at a time, hold down the Shift key of the computer main keyboard and then click on each clip that you want in the group selection
    or
    with your mouse cursor draw a rectangle around the clips that you want to select
    2. Are you using the Premiere Elements 12/12.1 Expert workspace Pan and Zoom Tool? Or the pan or zoom presets under fx Effects/Presets/? With those you can do pan or zoom, not pan and zoom.
    Or, are you in the Elements Organizer 12 Slideshow Editor using the pan and zoom effect there? Or, are you using keyframing the Motion Scale property for zoom and the Motion Position property for pan?
    Are you asking about photos with landscape or portrait orientation?
    The pan and zoom tool does one photo at a time.
    Have you read the Adobe documentation on the Pan and Zoom Tool?
    http://help.adobe.com/en_US/premiereelements/using/WSeffff8bffc802084-494411db12fd35452dd- 8000.html
    Please review and clarify and then we can get into greater details on this.
    Thanks.
    ATR

  • Triangular poly filter for live action?

    Is there a filter that yields a triangular poly look to a live action clip with the polys following the natural contour of the imagery...similar to a low res 3D render?

    It would be fantastic if someone cracked that, would it not? No, short of experimental 3D reconstruction software or things like the various Kinext experiments there is no such software that I'm aware of and even if there were, to get a proper polygon flow you'd need more than one view. Y'know, self-intersections and other ambiguous situations that won't work from just one fixed angle...
    Mylenium

  • I cannot send email over 3G. Receiving email is ok. Using wifi from my landfibre allows me to send email. No idea where to find the solution. Suggestions please. Thanks ia

    I cannot send email over 3G. receiving email over 3G is ok. Using wifi from my landline (glass) is ok. No idea where to find the solution. Suggestions please. Thanks i.a.
    TheOne

    You need a DATA service enabled by your carrier to be able to send e-mail via thier network.  Do you have a data plan with your carrier ?  If so - is it enabled ?
    Can you access internet thru your network (not wifi) ?

  • Printer HP Envy 4500 Series cannot be contacted over the network

    My wireless printing chooses when it wants to work, and right now it's really acting up. It is connected wirelessly, it is the default printer, but after troubleshooting it is telling me "Printer HP Envy 4500 Series cannot be contacted over the network." What can I do to get printing again?

    Hello featherfamily,
    Welcome to the HP Forums.
    I see that you are having an issue with the printer not connecting with a wireless connection.
    Please click on the following link that deals with when the 'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Windows 7.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time. 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I have purchased 9 songs and cannot get them over to my play list on my I pod how do I sync these songs onto my Ipod?

    I have purchased  9 songs on I tune and cannot get them over to my IPOD play list----I have tried to sync them like the old times I have tried dropping them into my IPOD wont take.    Can someone explain how I can get these new songs onto my IPOD and out of my purchase list

    Do you have the Convert higher bit rate songs to 128 Kbps AAC option ticked from under the iPod's Summary tab in iTunes?
    If so, disable it and then click the Apply button in the lower right hand corner to apply the changes to your device.
    B-rock

  • Cannot access Graphics - bad class file

    Hey.
    When I try to compile my source I get an error saying...
    .\Man.java:146: cannot access Graphics
    bad class file: .\Graphics.java
    file does not contain class Graphics
    Please remove the files or make sure it appears in the correct subdirectory.
    It's on a different computer so that's not exactly it, but it's close enough. Compiler was working fine until the other day when i found out that all the source files were zipped up in src.zip, I had to extract Graphics.java so I could open it in emacs, and after I did that it started giving me that error message. There's nothhing wrong with my source, and I didn't move Graphics, it's still in the correct place exactly as it was, and i looked at it, all the right stuff is still inside. I'm quite confused.
    So do I have to reinstall? That would mean a massive download on my 56k and I kinda wanna carry on with my work.

    You should not need to unzip src.zip to use the Graphics class or any class that comes with j2sdk. The compiled classes are in jar files that are installed in certain directories when you install the j2sdk.
    You should only need to have a line "import java.awt.Graphics;" near the start of your source code.
    The error most likely occurred when the compiler found a Graphics.class file but inside the file is java.awt.Graphics class, not a plain Graphics class.

  • Placing graphics OVER a video in iWeb?

    Hi, I have a video on my iWeb site and I want to place a graphic over it to act kind of like a picture frame. The graphic I want to use has transparent parts I created in photoshop so that, when I "send to front" on iWeb, it appears OVER my video and my video can then be seen behind it. However, when I publish my project and visit my site, the video always appears over the graphic frame I created. Is there a way to make the graphic act as an overlay through html or something?
    Thanks!

    Thanks, everyone! I tried placing the video in a text box. Do I then also place the frame in that same text box? If so, should it then be able to fit over the video? I feel like I must be doing something wrong.
    If I try the other technique of placing the image in the video, is there an easy way to do that in iMovie? I don't have Final Cut.

  • Problem with ipad 2 safari cannot download the file for windows live photo gallery

    on ipad 2 safari cannot download the file for windows live photo gallery

    What you can download via Safari on the iPad is very limited - you can only download apps from the iTunes app store on your computer to sync to the iPad, or from the App Store app directly on the iPad

  • I cannot receive MMS over WiFi- anyone else struggling? (2nd post)

    Original post:
         I cannot receive MMS over WiFi- anyone else struggling?
    Apparently, it's not the settings. Tech told me I need to just return the phone b/c they don't have a clue what's wrong with it. They've done everything they can on their end and nothing works. I posted about this earlier just before I spoke to advanced tech support and thought they'd fixed the issue, but it's not fixed.
    If someone finds a fix for this, please post it. As of now, my plan is to return the phone to the store tomorrow.

    schaweet
    UPDATE- A tech-savvy friend took a look at my phone this evening at work and couldn't fix the problem. He's a former tech support employee for another major wireless provider. He said his best guess is the problem is somewhere in the APN settings. It seems like LG's default settings are fighting (for lack of a better word) with Verizon's settings. He couldn't fix the problem and ended up suggesting I download the texting app "Textra" because it's one where the settings allow you to change the APN.
    I was dubious because we've already tried changing the texting program to the two others that come on the phone and neither worked. But neither allow you to edit or add to the APN settings either.
    I'm not sure how it is on anyone else's LG G3, but mine doesn't allow you to change the APN settings at all. On every single walk-through I've found for setting up MMS, I've followed it to the letter right up until it says, "Click the 'add' button in the upper right corner..." because that isn't an option on my phone. I imagine it's prob the same way for many others as well. I don't know if it's just on Verizon or if it's a product-wide problem.
    My tech friend said the only way I can change the APN settings on my own (without speaking to Verizon's tech folks again) would be to "jail break" the phone first, which I really don't want to do.
    I downloaded Textra and was surprised to find that it comes with a check-box for "MMS WiFi fix" under the setting "go here if MMS isn't working."  I clicked the appropriate boxes and sent myself a MMS using my husband's phone. I also asked a friend who has another provider to text me a test pic. Textra turned off WiFi, downloaded both pix, and then turned WiFi back on... exactly the way the phone's default settings should behave. It took a minute or so longer than a typical text but I'm okay with that so long as pix come through.
    I've been fighting this issue for nearly 2 weeks now. I've spoken to 7 different people at Verizon as well as several friends who are extremely knowledgeable regarding cell phone OS (KitKat in particular), and this is the only thing that has actually worked. I'm going to give it 24 hours though before I say the problem is truly "fixed."
    Hope this works!! (crosses fingers)
    mms_problem lg_g3 mms not receiving mms while connected to wifi

  • I bought my iPad in USA. It was set up over there.i live in Ireland.when I try to buy from apple store it doesn't accept my details and says I must put in my USA address.can this be changed?

    I bought my iPad in USA. It was set up over there.i live in Ireland.when I try to buy from apple store it doesn't accept my details and says I must put in my USA address.can this be changed?

    Walk it into the nearest Apple Store there in Ireland, admit you purposely avoided buying it there, and ask them to help you sort it out. I'm sure they'll be happy to service your overseas purchase.....

Maybe you are looking for