Cannot switch back to built-in output after connecting USB mic

I cannot get playback unless I plug back in my USB mic (Blue Yeti) on Mac OS X.
I get this notice:
"The selected audio device has no output channels."
I select Default Output to be "built in output" then go to Audio Channel Mapping tab and my output device is saying Yeti stereo microphone (not working).
It is obviously not working because it isn't plugged in. My question is why isnt it using my built in output when the mic is unplugged. Even through the Sound tab in system preferences my output is set to "built in"
I get playback through the mic when it's plugged in, but I need to be able to get playback through my built in output when the mic is not plugged in. Any ideas on this greatly appreciated.

Start out with these ! Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support How to Reset NVRAM on your Mac - Apple Support if issue still persists look inside the audio jack see if the light is on.

Similar Messages

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Vista Ultimate: install Bootcamp failed, cannot switch back to Leopard

Hello
I just installed Vista Ultimate on a 100 Gb partition. After having finished I tried to install Bootcamp, needed to switch back to Leopard.
Though the installation of Bootcamp finishes OK I can't find it back in the Control Panel. So I'm not able to switch back to Leopard any longer.
And since I cannot restart Leopard, I cannot uninstall Vista Ultimate, so I'm running in a circle ..
Any suggestion/help how to get back in the original settings would be very welcome. thx in advance folks !

The Hatter thanks for your quick response !
Installing Boot Camo in 64 bits Vista cause problems with Services "KeyAgent" and "MacHAL". However install ends with msg "install ended successfully". I believe this might not be true ..
Want to uninstall and afterward reinstall 32 bits version.
However, prefer installing Vista 32 bits having started with Leopard, just to be sure. But I can't come back to Leopard without BootCamo.
Will try to perform a "direct" 32 bit install in the partition where 64 bits resides now.
If this succeeds I must be able to install Boot Camp succesfully ...
Don't you think so ?

Cannot switch back from windows keyboard setup

I switched the option and command key in system preferences so the layout would be correct on my windows keyboard but now the keys will not switch back (they say they are switched but do not work that way) Does anyone know how to fix this?

Presumably you mean back to OSX.
You can either locate the Bootcamp utility in the system tray and click it and choose reboot to OSX or you can reboot and hold the Alt key after the chime and select Macintosh HD.

How can I get my phone to switch back to a Canadian network after being in the USA?

I've spent the past week in the states and my phone automatically switches over to AT&T, and usually won't switch back to BELL until i'm well over the Canadian border. This time, though, my phone keeps saying it doesn't have service and won't connect to the BELL network when I try to under settings. It will connect to AT&T, but the signal is weak, and is costing me long distance charges. I've tried turning my phone off and on, plugging it into my computer and syncing it, and neither have worked. Any advice?

Call Bell tech support and tell them to reverse the charges too...
Bell Mobility
Support for mobile phones: 1-800-667-0123
From your mobile phone:
*611 (no charge)

BlackBerry's inability to switch back to EDGE when the WiFi connection loses Internet connectivity

This issue has been driving me crazy for a while now, but here goes:
The city I live in has a poor reception from T-Mobile, AT&T, and other providers. I have to rely on my home wireless connection sometimes to get emails on my phone. So, instead of using "Mobile Network Preferred" option under Connection Preferences, I set it to Wi-Fi Preferred.
However, Wi-Fi preferred option comes at a great cost, with the inability to switch back to the Mobile Network if the connection to the Wi-Fi is lost.
For example, assuming if the phone is connected to a router, based on the following diagram:
Blackberry >>>>> Wireless Router >>>> Modem >>>> Internet Service Provider
If the modem loses connection with the Internet Service Provider, or if the Service Provider is down for maintenance, the BlackBerry will have no knowledage of any of these events, and will stay connected to the wireless router until the wireless reception is lost or degraded to a certain percentage.
So, rather than basing the metric on the reception, is there a program out there that can send out ping echos to a specified destination? One ping for every 5 minute interval. if 3 consecutive pings are lost, the phone should switch back to Mobile Network, assuming if the user did not set their phone to Wi-Fi only.
Thank you.

Sorry for the problems you're having with this hotspot losing connection so frequently. For you I have included specific troubleshooting steps to resolve this issue.
1. Remove the battery from your phone and leave off for a full minute
2. Re-insert battery and power phone on
3. Dial *228 and choose option 2
4. When the programming has been completed, press OK and your phone will power off, then back on.
5. Reset your password for your Hotspot
6. Update the password on your phone as well. This will help avoid any corrupt connection you may have had previously.
To reset the password for your Hotspot: Settings > Wireless and Networks > WiFi Settings > Manage Networks > long press on the network you want to modify > Enter new password
Alternately, you can long press on the network you want to modify and select "Forget this network", then back out and re-join it at which point it'll prompt you for a password.
Hope this helps!
Thanks,

Problems after connecting USB 1.1 devices to an unpowered USB hub

After connecting a mouse, usb stick and an external hardrive to an unpowered USB 2.0 hub, I now get no response from any of those devices, though they had been working fine before. Other devices that I have since plugged into that same usb slot work just fine. What could possibly have happened??? I appreciate any insight!

Nance,
Welcome to the Discussions.
You did not mention if each one of these devices still works when plugged directly into the USB 1.1 port. If they do, then I cannot explain the problem. If they do not, it is possible the USB 1.1 port was overloaded with all three devices connected to the unpowered USB 2.0 hub. You may have gotten such a warning on the screen.
If you have not done so, I would disconnect all devices, shut down the powerbook, then reset the PRAM.
http://docs.info.apple.com/article.html?artnum=2238
Now test each device by connecting directly to the USB 1.1 port.
If both the USB stick and USB HD (I am assuming that you have an unpowered 2.5" HD) were mounted on the computer's desktop when this 'possible' power shortfall occurred, it could have corrupted both devices so they will not longer mount properly. Connect each device to the USB 1.1 port, then see if Disk Utility can see the device and repair any damage. The mouse may no longer work if the preferences or other software was corrupted.
If you are running an unpowered HD, I would recommend a powered USB 2.0 hub so you can connect other devices without worry.

Cannot switch WIFI on Dell Inspiron 5420 after OS freeze and restart.(Win 8.1)

Fortnight ago, my laptop freezed after starting up from hibernate, am guessing the laptop freezed due to many programs being serviced. i had to restart the system by forcibly shutting the system down using the power button.
After the boot up, i discovered my laptop WIFI didn't turn up, after several attempt to start it up, i used "5460_Network_Driver_0J8D1_WN_10.0.0.263_A00" to repair the driver, which worked well at first until my laptop switched on the "Airplane Mode" all by itself, on turning off the "Airplane mode" and turning the "WIFI" on manually, it couldn't initiate and i had to repair again.
I opted to uninstall and remove the profile and have a fresh installation all over again. only this time i kinda made it worse, because "5460_Network_Driver_0J8D1_WN_10.0.0.263_A00" now fails to complete installation as it fails.
Also tried installing this "Chipset_Driver_CN7W1_WN_9.5.14.1724_A01" before installing "5460_Network_Driver_0J8D1_WN_10.0.0.263_A00"
I attached the images and log, please what do i have to do?
[04/22/15 23:51:24] Update Package Execution Started
[04/22/15 23:51:24] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/22/15 23:51:24] DUP Framework EXE Version: 3.0.94.1
[04/22/15 23:51:24] DUP Release: 0J8D1X05-00
[04/22/15 23:51:24] Intializing framework...
[04/22/15 23:51:24] logo.png
[04/22/15 23:51:26] User Command: attended
[04/22/15 23:51:26] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/22/15 23:51:26] DUP Vendor Software Version: 10.0.0.263
[04/22/15 23:51:26] Local System/Model Compatible with this Package? Yes
[04/22/15 23:51:26] Local System OS Version: 6.2.0.0
[04/22/15 23:51:26] OS Compatible with this Package? Unknown
[04/22/15 23:51:26] Local System OS Language: Unknown
[04/22/15 23:51:26] Language Compatible with this Package? Unknown
[04/22/15 23:51:38] Identified Behavior : attended
[04/22/15 23:51:38] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP6713.tmp
[04/22/15 23:51:38] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP6713.tmp"
[04/22/15 23:51:38] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/22/15 23:51:38] Identified Behavior : attended
[04/22/15 23:59:11] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP6713.tmp
[04/22/15 23:59:11]
--- Start of Vendor Software Log ---
[04/22/15 23:59:11] ASCII payload log file detected.
[04/22/15 23:59:11] [2015-4-22 23:51:39] Setup start up.
[2015-4-22 23:51:39] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP6713.tmp"]
[04/22/15 23:59:11]
--- End of Vendor Software Log ---
[04/22/15 23:59:11] Vendor Software Return Code: 14
[04/22/15 23:59:11] logo.png
[04/22/15 23:59:11] Name of Exit Code: REBOOT_REQUIRED
[04/22/15 23:59:11] Exit Code set to: 2 (0x2)
[04/22/15 23:59:11] Result: REBOOT
[04/22/15 23:59:14] Name of Exit Code: REBOOT_REQUIRED
[04/22/15 23:59:14] Execution terminated at date-time 04/22/15 23:59:14
[04/22/15 23:59:14] ######
਍਍[04/23/15 00:33:41] Update Package Execution Started
[04/23/15 00:33:41] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 00:33:41] DUP Framework EXE Version: 3.0.94.1
[04/23/15 00:33:41] DUP Release: 0J8D1X05-00
[04/23/15 00:33:41] Intializing framework...
[04/23/15 00:33:42] logo.png
[04/23/15 00:33:45] User Command: attended
[04/23/15 00:33:45] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 00:33:45] DUP Vendor Software Version: 10.0.0.263
[04/23/15 00:33:45] Local System/Model Compatible with this Package? Yes
[04/23/15 00:33:45] Local System OS Version: 6.2.0.0
[04/23/15 00:33:45] OS Compatible with this Package? Unknown
[04/23/15 00:33:45] Local System OS Language: Unknown
[04/23/15 00:33:45] Language Compatible with this Package? Unknown
[04/23/15 00:34:02] Identified Behavior : attended
[04/23/15 00:34:02] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP7532.tmp
[04/23/15 00:34:02] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP7532.tmp"
[04/23/15 00:34:02] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 00:34:02] Identified Behavior : attended
[04/23/15 00:42:50] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP7532.tmp
[04/23/15 00:42:50]
--- Start of Vendor Software Log ---
[04/23/15 00:42:50] ASCII payload log file detected.
[04/23/15 00:42:50] [2015-4-23 00:34:08] Setup start up.
[2015-4-23 00:34:08] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP7532.tmp"]
[04/23/15 00:42:50]
--- End of Vendor Software Log ---
[04/23/15 00:42:50] Vendor Software Return Code: 14
[04/23/15 00:42:51] logo.png
[04/23/15 00:42:51] Name of Exit Code: REBOOT_REQUIRED
[04/23/15 00:42:51] Exit Code set to: 2 (0x2)
[04/23/15 00:42:51] Result: REBOOT
[04/23/15 00:42:53] Name of Exit Code: REBOOT_REQUIRED
[04/23/15 00:42:53] Execution terminated at date-time 04/23/15 00:42:53
[04/23/15 00:42:53] ######
਍਍[04/23/15 06:29:21] Update Package Execution Started
[04/23/15 06:29:21] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 06:29:21] DUP Framework EXE Version: 3.0.94.1
[04/23/15 06:29:21] DUP Release: 0J8D1X05-00
[04/23/15 06:29:21] Intializing framework...
[04/23/15 06:29:21] logo.png
[04/23/15 06:29:24] User Command: attended
[04/23/15 06:29:24] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 06:29:24] DUP Vendor Software Version: 10.0.0.263
[04/23/15 06:29:24] Local System/Model Compatible with this Package? Yes
[04/23/15 06:29:24] Local System OS Version: 6.2.0.0
[04/23/15 06:29:24] OS Compatible with this Package? Unknown
[04/23/15 06:29:24] Local System OS Language: Unknown
[04/23/15 06:29:24] Language Compatible with this Package? Unknown
[04/23/15 06:29:41] Identified Behavior : attended
[04/23/15 06:29:41] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPE473.tmp
[04/23/15 06:29:41] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPE473.tmp"
[04/23/15 06:29:41] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 06:29:41] Identified Behavior : attended
[04/23/15 06:37:41] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPE473.tmp
[04/23/15 06:37:41]
--- Start of Vendor Software Log ---
[04/23/15 06:37:41] ASCII payload log file detected.
[04/23/15 06:37:41] [2015-4-23 06:29:43] Setup start up.
[2015-4-23 06:29:43] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPE473.tmp"]
[04/23/15 06:37:41]
--- End of Vendor Software Log ---
[04/23/15 06:37:41] Vendor Software Return Code: 14
[04/23/15 06:37:42] logo.png
[04/23/15 06:37:42] Name of Exit Code: REBOOT_REQUIRED
[04/23/15 06:37:42] Exit Code set to: 2 (0x2)
[04/23/15 06:37:42] Result: REBOOT
[04/23/15 06:37:45] Name of Exit Code: REBOOT_REQUIRED
[04/23/15 06:37:45] Execution terminated at date-time 04/23/15 06:37:45
[04/23/15 06:37:45] ######
਍਍[04/23/15 20:31:04] Update Package Execution Started
[04/23/15 20:31:04] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 20:31:04] DUP Framework EXE Version: 3.0.94.1
[04/23/15 20:31:04] DUP Release: 0J8D1X05-00
[04/23/15 20:31:04] Intializing framework...
[04/23/15 20:31:05] logo.png
[04/23/15 20:31:11] User Command: attended
[04/23/15 20:31:11] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 20:31:11] DUP Vendor Software Version: 10.0.0.263
[04/23/15 20:31:11] Local System/Model Compatible with this Package? Yes
[04/23/15 20:31:11] Local System OS Version: 6.2.0.0
[04/23/15 20:31:11] OS Compatible with this Package? Unknown
[04/23/15 20:31:11] Local System OS Language: Unknown
[04/23/15 20:31:11] Language Compatible with this Package? Unknown
[04/23/15 20:31:28] Identified Behavior : attended
[04/23/15 20:31:28] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP9320.tmp
[04/23/15 20:31:28] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP9320.tmp"
[04/23/15 20:31:28] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 20:31:28] Identified Behavior : attended
[04/23/15 20:37:09] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP9320.tmp
[04/23/15 20:37:09]
--- Start of Vendor Software Log ---
[04/23/15 20:37:09] ASCII payload log file detected.
[04/23/15 20:37:09] [2015-4-23 20:31:32] Setup start up.
[2015-4-23 20:31:32] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP9320.tmp"]
[04/23/15 20:37:09]
--- End of Vendor Software Log ---
[04/23/15 20:37:09] Vendor Software Return Code: 14
[04/23/15 20:37:09] logo.png
[04/23/15 20:37:09] Name of Exit Code: REBOOT_REQUIRED
[04/23/15 20:37:09] Exit Code set to: 2 (0x2)
[04/23/15 20:37:09] Result: REBOOT
[04/23/15 20:37:20] Name of Exit Code: REBOOT_REQUIRED
[04/23/15 20:37:20] Execution terminated at date-time 04/23/15 20:37:20
[04/23/15 20:37:20] ######
਍਍[04/23/15 20:50:20] Update Package Execution Started
[04/23/15 20:50:20] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 20:50:20] DUP Framework EXE Version: 3.0.94.1
[04/23/15 20:50:20] DUP Release: 0J8D1X05-00
[04/23/15 20:50:20] Intializing framework...
[04/23/15 20:50:20] logo.png
[04/23/15 20:50:23] User Command: attended
[04/23/15 20:50:23] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 20:50:23] DUP Vendor Software Version: 10.0.0.263
[04/23/15 20:50:23] Local System/Model Compatible with this Package? Yes
[04/23/15 20:50:23] Local System OS Version: 6.2.0.0
[04/23/15 20:50:23] OS Compatible with this Package? Unknown
[04/23/15 20:50:23] Local System OS Language: Unknown
[04/23/15 20:50:23] Language Compatible with this Package? Unknown
[04/23/15 20:50:41] Identified Behavior : attended
[04/23/15 20:50:41] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP4E33.tmp
[04/23/15 20:50:41] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP4E33.tmp"
[04/23/15 20:50:41] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 20:50:41] Identified Behavior : attended
[04/23/15 20:52:03] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP4E33.tmp
[04/23/15 20:52:03]
--- Start of Vendor Software Log ---
[04/23/15 20:52:03] ASCII payload log file detected.
[04/23/15 20:52:03] [2015-4-23 20:50:47] Setup start up.
[2015-4-23 20:50:47] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP4E33.tmp"]
[04/23/15 20:52:03]
--- End of Vendor Software Log ---
[04/23/15 20:52:03] Vendor Software Return Code: 7
[04/23/15 20:52:03] logo.png
[04/23/15 20:52:03] Name of Exit Code: ERROR
[04/23/15 20:52:03] Exit Code set to: 1 (0x1)
[04/23/15 20:52:03] Result: FAILURE
[04/23/15 20:52:15] Open file: C:\ProgramData\Dell\UpdatePackage\Log\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.txt
[04/23/15 20:52:55] Name of Exit Code: ERROR
[04/23/15 20:52:55] Execution terminated at date-time 04/23/15 20:52:55
[04/23/15 20:52:55] ######
਍਍[04/23/15 20:53:56] Update Package Execution Started
[04/23/15 20:53:56] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 20:53:56] DUP Framework EXE Version: 3.0.94.1
[04/23/15 20:53:56] DUP Release: 0J8D1X05-00
[04/23/15 20:53:56] Intializing framework...
[04/23/15 20:53:57] logo.png
[04/23/15 20:53:58] User Command: attended
[04/23/15 20:53:58] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 20:53:58] DUP Vendor Software Version: 10.0.0.263
[04/23/15 20:53:58] Local System/Model Compatible with this Package? Yes
[04/23/15 20:53:58] Local System OS Version: 6.2.0.0
[04/23/15 20:53:58] OS Compatible with this Package? Unknown
[04/23/15 20:53:58] Local System OS Language: Unknown
[04/23/15 20:53:58] Language Compatible with this Package? Unknown
[04/23/15 20:54:11] Identified Behavior : attended
[04/23/15 20:54:11] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP8552.tmp
[04/23/15 20:54:11] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP8552.tmp"
[04/23/15 20:54:11] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 20:54:11] Identified Behavior : attended
[04/23/15 20:54:39] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP8552.tmp
[04/23/15 20:54:39]
--- Start of Vendor Software Log ---
[04/23/15 20:54:39] ASCII payload log file detected.
[04/23/15 20:54:39] [2015-4-23 20:54:12] Setup start up.
[2015-4-23 20:54:12] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP8552.tmp"]
[04/23/15 20:54:39]
--- End of Vendor Software Log ---
[04/23/15 20:54:39] Vendor Software Return Code: 7
[04/23/15 20:54:39] logo.png
[04/23/15 20:54:39] Name of Exit Code: ERROR
[04/23/15 20:54:39] Exit Code set to: 1 (0x1)
[04/23/15 20:54:39] Result: FAILURE
[04/23/15 20:54:43] Name of Exit Code: ERROR
[04/23/15 20:54:43] Execution terminated at date-time 04/23/15 20:54:43
[04/23/15 20:54:43] ######
਍਍[04/23/15 20:55:45] Update Package Execution Started
[04/23/15 20:55:45] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 20:55:45] DUP Framework EXE Version: 3.0.94.1
[04/23/15 20:55:45] DUP Release: 0J8D1X05-00
[04/23/15 20:55:45] Intializing framework...
[04/23/15 20:55:45] logo.png
[04/23/15 20:55:47] User Command: attended
[04/23/15 20:55:47] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 20:55:47] DUP Vendor Software Version: 10.0.0.263
[04/23/15 20:55:47] Local System/Model Compatible with this Package? Yes
[04/23/15 20:55:47] Local System OS Version: 6.2.0.0
[04/23/15 20:55:47] OS Compatible with this Package? Unknown
[04/23/15 20:55:47] Local System OS Language: Unknown
[04/23/15 20:55:47] Language Compatible with this Package? Unknown
[04/23/15 20:56:02] Identified Behavior : attended
[04/23/15 20:56:02] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3573.tmp
[04/23/15 20:56:02] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3573.tmp"
[04/23/15 20:56:02] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 20:56:02] Identified Behavior : attended
[04/23/15 20:56:36] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3573.tmp
[04/23/15 20:56:36]
--- Start of Vendor Software Log ---
[04/23/15 20:56:36] ASCII payload log file detected.
[04/23/15 20:56:36] [2015-4-23 20:56:02] Setup start up.
[2015-4-23 20:56:02] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3573.tmp"]
[04/23/15 20:56:36]
--- End of Vendor Software Log ---
[04/23/15 20:56:36] Vendor Software Return Code: 7
[04/23/15 20:56:36] logo.png
[04/23/15 20:56:36] Name of Exit Code: ERROR
[04/23/15 20:56:36] Exit Code set to: 1 (0x1)
[04/23/15 20:56:36] Result: FAILURE
[04/23/15 20:56:40] Open file: C:\ProgramData\Dell\UpdatePackage\Log\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.txt
[04/23/15 20:57:36] Name of Exit Code: ERROR
[04/23/15 20:57:36] Execution terminated at date-time 04/23/15 20:57:36
[04/23/15 20:57:36] ######
਍਍[04/23/15 21:02:30] Update Package Execution Started
[04/23/15 21:02:30] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 21:02:30] DUP Framework EXE Version: 3.0.94.1
[04/23/15 21:02:30] DUP Release: 0J8D1X05-00
[04/23/15 21:02:30] Intializing framework...
[04/23/15 21:02:30] logo.png
[04/23/15 21:02:32] User Command: attended
[04/23/15 21:02:32] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 21:02:32] DUP Vendor Software Version: 10.0.0.263
[04/23/15 21:02:32] Local System/Model Compatible with this Package? Yes
[04/23/15 21:02:32] Local System OS Version: 6.2.0.0
[04/23/15 21:02:32] OS Compatible with this Package? Unknown
[04/23/15 21:02:32] Local System OS Language: Unknown
[04/23/15 21:02:32] Language Compatible with this Package? Unknown
[04/23/15 21:02:46] Identified Behavior : attended
[04/23/15 21:02:46] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP6149.tmp
[04/23/15 21:02:46] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP6149.tmp"
[04/23/15 21:02:46] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 21:02:46] Identified Behavior : attended
[04/23/15 21:03:23] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP6149.tmp
[04/23/15 21:03:23]
--- Start of Vendor Software Log ---
[04/23/15 21:03:23] ASCII payload log file detected.
[04/23/15 21:03:23] [2015-4-23 21:02:47] Setup start up.
[2015-4-23 21:02:47] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP6149.tmp"]
[04/23/15 21:03:23]
--- End of Vendor Software Log ---
[04/23/15 21:03:23] Vendor Software Return Code: 7
[04/23/15 21:03:24] logo.png
[04/23/15 21:03:24] Name of Exit Code: ERROR
[04/23/15 21:03:24] Exit Code set to: 1 (0x1)
[04/23/15 21:03:24] Result: FAILURE
[04/23/15 21:03:28] Name of Exit Code: ERROR
[04/23/15 21:03:28] Execution terminated at date-time 04/23/15 21:03:28
[04/23/15 21:03:28] ######
਍਍[04/23/15 21:04:14] Update Package Execution Started
[04/23/15 21:04:14] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 21:04:14] DUP Framework EXE Version: 3.0.94.1
[04/23/15 21:04:14] DUP Release: 0J8D1X05-00
[04/23/15 21:04:14] Intializing framework...
[04/23/15 21:04:14] logo.png
[04/23/15 21:04:15] User Command: attended
[04/23/15 21:04:15] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 21:04:15] DUP Vendor Software Version: 10.0.0.263
[04/23/15 21:04:15] Local System/Model Compatible with this Package? Yes
[04/23/15 21:04:15] Local System OS Version: 6.2.0.0
[04/23/15 21:04:15] OS Compatible with this Package? Unknown
[04/23/15 21:04:15] Local System OS Language: Unknown
[04/23/15 21:04:15] Language Compatible with this Package? Unknown
[04/23/15 21:04:30] Identified Behavior : attended
[04/23/15 21:04:30] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPF49B.tmp
[04/23/15 21:04:30] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPF49B.tmp"
[04/23/15 21:04:30] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 21:04:30] Identified Behavior : attended
[04/23/15 21:05:09] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPF49B.tmp
[04/23/15 21:05:09]
--- Start of Vendor Software Log ---
[04/23/15 21:05:09] ASCII payload log file detected.
[04/23/15 21:05:09] [2015-4-23 21:04:30] Setup start up.
[2015-4-23 21:04:30] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPF49B.tmp"]
[04/23/15 21:05:09]
--- End of Vendor Software Log ---
[04/23/15 21:05:09] Vendor Software Return Code: 7
[04/23/15 21:05:09] logo.png
[04/23/15 21:05:09] Name of Exit Code: ERROR
[04/23/15 21:05:09] Exit Code set to: 1 (0x1)
[04/23/15 21:05:09] Result: FAILURE
[04/23/15 21:05:11] Open file: C:\ProgramData\Dell\UpdatePackage\Log\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.txt
[04/23/15 21:06:31] Name of Exit Code: ERROR
[04/23/15 21:06:31] Execution terminated at date-time 04/23/15 21:06:31
[04/23/15 21:06:31] ######
਍਍[04/23/15 21:14:47] Update Package Execution Started
[04/23/15 21:14:47] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 21:14:47] DUP Framework EXE Version: 3.0.94.1
[04/23/15 21:14:47] DUP Release: 0J8D1X05-00
[04/23/15 21:14:47] Intializing framework...
[04/23/15 21:14:48] logo.png
[04/23/15 21:14:59] User Command: attended
[04/23/15 21:14:59] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 21:14:59] DUP Vendor Software Version: 10.0.0.263
[04/23/15 21:14:59] Local System/Model Compatible with this Package? Yes
[04/23/15 21:14:59] Local System OS Version: 6.2.0.0
[04/23/15 21:14:59] OS Compatible with this Package? Unknown
[04/23/15 21:14:59] Local System OS Language: Unknown
[04/23/15 21:14:59] Language Compatible with this Package? Unknown
[04/23/15 21:15:33] Identified Behavior : attended
[04/23/15 21:15:33] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPE5FD.tmp
[04/23/15 21:15:33] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPE5FD.tmp"
[04/23/15 21:15:33] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 21:15:33] Identified Behavior : attended
[04/23/15 21:16:09] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPE5FD.tmp
[04/23/15 21:16:09]
--- Start of Vendor Software Log ---
[04/23/15 21:16:09] ASCII payload log file detected.
[04/23/15 21:16:09] [2015-4-23 21:15:37] Setup start up.
[2015-4-23 21:15:37] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUPE5FD.tmp"]
[04/23/15 21:16:09]
--- End of Vendor Software Log ---
[04/23/15 21:16:09] Vendor Software Return Code: 7
[04/23/15 21:16:10] logo.png
[04/23/15 21:16:10] Name of Exit Code: ERROR
[04/23/15 21:16:10] Exit Code set to: 1 (0x1)
[04/23/15 21:16:10] Result: FAILURE
[04/23/15 21:16:22] Name of Exit Code: ERROR
[04/23/15 21:16:22] Execution terminated at date-time 04/23/15 21:16:22
[04/23/15 21:16:22] ######
਍਍[04/23/15 21:31:51] Update Package Execution Started
[04/23/15 21:31:51] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 21:31:51] DUP Framework EXE Version: 3.0.94.1
[04/23/15 21:31:51] DUP Release: 0J8D1X05-00
[04/23/15 21:31:51] Intializing framework...
[04/23/15 21:31:51] logo.png
[04/23/15 21:31:54] User Command: attended
[04/23/15 21:31:54] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 21:31:54] DUP Vendor Software Version: 10.0.0.263
[04/23/15 21:31:54] Local System/Model Compatible with this Package? Yes
[04/23/15 21:31:54] Local System OS Version: 6.2.0.0
[04/23/15 21:31:54] OS Compatible with this Package? Unknown
[04/23/15 21:31:54] Local System OS Language: Unknown
[04/23/15 21:31:54] Language Compatible with this Package? Unknown
[04/23/15 21:32:07] Identified Behavior : attended
[04/23/15 21:32:07] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP10DD.tmp
[04/23/15 21:32:07] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP10DD.tmp"
[04/23/15 21:32:07] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 21:32:07] Identified Behavior : attended
[04/23/15 21:32:48] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP10DD.tmp
[04/23/15 21:32:48]
--- Start of Vendor Software Log ---
[04/23/15 21:32:48] ASCII payload log file detected.
[04/23/15 21:32:48] [2015-4-23 21:32:07] Setup start up.
[2015-4-23 21:32:07] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP10DD.tmp"]
[04/23/15 21:32:48]
--- End of Vendor Software Log ---
[04/23/15 21:32:48] Vendor Software Return Code: 7
[04/23/15 21:32:48] logo.png
[04/23/15 21:32:48] Name of Exit Code: ERROR
[04/23/15 21:32:48] Exit Code set to: 1 (0x1)
[04/23/15 21:32:48] Result: FAILURE
[04/23/15 21:34:37] Open file: C:\ProgramData\Dell\UpdatePackage\Log\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.txt
[04/23/15 21:38:16] Name of Exit Code: ERROR
[04/23/15 21:38:16] Execution terminated at date-time 04/23/15 21:38:16
[04/23/15 21:38:16] ######
਍਍[04/23/15 22:10:43] Update Package Execution Started
[04/23/15 22:10:43] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 22:10:43] DUP Framework EXE Version: 3.0.94.1
[04/23/15 22:10:43] DUP Release: 0J8D1X05-00
[04/23/15 22:10:43] Intializing framework...
[04/23/15 22:10:43] logo.png
[04/23/15 22:10:46] User Command: attended
[04/23/15 22:10:46] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 22:10:46] DUP Vendor Software Version: 10.0.0.263
[04/23/15 22:10:46] Local System/Model Compatible with this Package? Yes
[04/23/15 22:10:46] Local System OS Version: 6.2.0.0
[04/23/15 22:10:46] OS Compatible with this Package? Unknown
[04/23/15 22:10:46] Local System OS Language: Unknown
[04/23/15 22:10:46] Language Compatible with this Package? Unknown
[04/23/15 22:10:57] Identified Behavior : attended
[04/23/15 22:10:57] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3929.tmp
[04/23/15 22:10:57] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3929.tmp"
[04/23/15 22:10:57] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 22:10:57] Identified Behavior : attended
[04/23/15 22:11:39] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3929.tmp
[04/23/15 22:11:39]
--- Start of Vendor Software Log ---
[04/23/15 22:11:39] ASCII payload log file detected.
[04/23/15 22:11:39] [2015-4-23 22:11:04] Setup start up.
[2015-4-23 22:11:04] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3929.tmp"]
[04/23/15 22:11:39]
--- End of Vendor Software Log ---
[04/23/15 22:11:39] Vendor Software Return Code: 7
[04/23/15 22:11:39] logo.png
[04/23/15 22:11:39] Name of Exit Code: ERROR
[04/23/15 22:11:39] Exit Code set to: 1 (0x1)
[04/23/15 22:11:39] Result: FAILURE
[04/23/15 22:11:44] Open file: C:\ProgramData\Dell\UpdatePackage\Log\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.txt
[04/23/15 22:12:56] Name of Exit Code: ERROR
[04/23/15 22:12:56] Execution terminated at date-time 04/23/15 22:12:56
[04/23/15 22:12:56] ######
਍਍[04/23/15 22:26:24] Update Package Execution Started
[04/23/15 22:26:24] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/23/15 22:26:24] DUP Framework EXE Version: 3.0.94.1
[04/23/15 22:26:24] DUP Release: 0J8D1X05-00
[04/23/15 22:26:24] Intializing framework...
[04/23/15 22:26:24] logo.png
[04/23/15 22:26:26] User Command: attended
[04/23/15 22:26:26] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/23/15 22:26:26] DUP Vendor Software Version: 10.0.0.263
[04/23/15 22:26:26] Local System/Model Compatible with this Package? Yes
[04/23/15 22:26:26] Local System OS Version: 6.2.0.0
[04/23/15 22:26:26] OS Compatible with this Package? Unknown
[04/23/15 22:26:26] Local System OS Language: Unknown
[04/23/15 22:26:26] Language Compatible with this Package? Unknown
[04/23/15 22:26:34] Identified Behavior : attended
[04/23/15 22:26:34] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP8561.tmp
[04/23/15 22:26:34] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP8561.tmp"
[04/23/15 22:26:34] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/23/15 22:26:34] Identified Behavior : attended
[04/23/15 22:26:57] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP8561.tmp
[04/23/15 22:26:57]
--- Start of Vendor Software Log ---
[04/23/15 22:26:57] ASCII payload log file detected.
[04/23/15 22:26:57] [2015-4-23 22:26:34] Setup start up.
[2015-4-23 22:26:34] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP8561.tmp"]
[04/23/15 22:26:57]
--- End of Vendor Software Log ---
[04/23/15 22:26:57] Vendor Software Return Code: 7
[04/23/15 22:26:58] logo.png
[04/23/15 22:26:58] Name of Exit Code: ERROR
[04/23/15 22:26:58] Exit Code set to: 1 (0x1)
[04/23/15 22:26:58] Result: FAILURE
[04/23/15 22:27:04] Name of Exit Code: ERROR
[04/23/15 22:27:04] Execution terminated at date-time 04/23/15 22:27:04
[04/23/15 22:27:04] ######
਍਍[04/24/15 09:38:59] Update Package Execution Started
[04/24/15 09:38:59] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/24/15 09:38:59] DUP Framework EXE Version: 3.0.94.1
[04/24/15 09:38:59] DUP Release: 0J8D1X05-00
[04/24/15 09:38:59] Intializing framework...
[04/24/15 09:39:01] logo.png
[04/24/15 09:39:04] User Command: attended
[04/24/15 09:39:04] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/24/15 09:39:04] DUP Vendor Software Version: 10.0.0.263
[04/24/15 09:39:04] Local System/Model Compatible with this Package? Yes
[04/24/15 09:39:04] Local System OS Version: 6.2.0.0
[04/24/15 09:39:04] OS Compatible with this Package? Unknown
[04/24/15 09:39:04] Local System OS Language: Unknown
[04/24/15 09:39:04] Language Compatible with this Package? Unknown
[04/24/15 09:39:27] Identified Behavior : attended
[04/24/15 09:39:27] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP91D0.tmp
[04/24/15 09:39:27] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP91D0.tmp"
[04/24/15 09:39:27] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/24/15 09:39:27] Identified Behavior : attended
[04/24/15 09:40:30] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP91D0.tmp
[04/24/15 09:40:30]
--- Start of Vendor Software Log ---
[04/24/15 09:40:30] ASCII payload log file detected.
[04/24/15 09:40:30] [2015-4-24 09:39:37] Setup start up.
[2015-4-24 09:39:37] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP91D0.tmp"]
[04/24/15 09:40:30]
--- End of Vendor Software Log ---
[04/24/15 09:40:30] Vendor Software Return Code: 7
[04/24/15 09:40:30] logo.png
[04/24/15 09:40:30] Name of Exit Code: ERROR
[04/24/15 09:40:30] Exit Code set to: 1 (0x1)
[04/24/15 09:40:30] Result: FAILURE
[04/24/15 09:40:36] Name of Exit Code: ERROR
[04/24/15 09:40:36] Execution terminated at date-time 04/24/15 09:40:36
[04/24/15 09:40:36] ######
਍਍[04/24/15 21:51:50] Update Package Execution Started
[04/24/15 21:51:50] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/24/15 21:51:50] DUP Framework EXE Version: 3.0.94.1
[04/24/15 21:51:50] DUP Release: 0J8D1X05-00
[04/24/15 21:51:50] Intializing framework...
[04/24/15 21:51:50] logo.png
[04/24/15 21:52:00] User Command: attended
[04/24/15 21:52:00] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/24/15 21:52:00] DUP Vendor Software Version: 10.0.0.263
[04/24/15 21:52:00] Local System/Model Compatible with this Package? Yes
[04/24/15 21:52:00] Local System OS Version: 6.2.0.0
[04/24/15 21:52:00] OS Compatible with this Package? Unknown
[04/24/15 21:52:00] Local System OS Language: Unknown
[04/24/15 21:52:00] Language Compatible with this Package? Unknown
[04/24/15 21:52:08] Identified Behavior : attended
[04/24/15 21:52:08] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3AA5.tmp
[04/24/15 21:52:08] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3AA5.tmp"
[04/24/15 21:52:08] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/24/15 21:52:08] Identified Behavior : attended
[04/24/15 21:52:49] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3AA5.tmp
[04/24/15 21:52:49]
--- Start of Vendor Software Log ---
[04/24/15 21:52:49] ASCII payload log file detected.
[04/24/15 21:52:49] [2015-4-24 21:52:09] Setup start up.
[2015-4-24 21:52:09] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP3AA5.tmp"]
[04/24/15 21:52:49]
--- End of Vendor Software Log ---
[04/24/15 21:52:49] Vendor Software Return Code: 7
[04/24/15 21:52:49] logo.png
[04/24/15 21:52:49] Name of Exit Code: ERROR
[04/24/15 21:52:49] Exit Code set to: 1 (0x1)
[04/24/15 21:52:49] Result: FAILURE
[04/24/15 21:52:53] Name of Exit Code: ERROR
[04/24/15 21:52:53] Execution terminated at date-time 04/24/15 21:52:53
[04/24/15 21:52:53] ######
਍਍[04/25/15 18:29:35] Update Package Execution Started
[04/25/15 18:29:35] Original command line: "C:\Users\Badejo\Downloads\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.EXE"
[04/25/15 18:29:35] DUP Framework EXE Version: 3.0.94.1
[04/25/15 18:29:35] DUP Release: 0J8D1X05-00
[04/25/15 18:29:35] Intializing framework...
[04/25/15 18:29:36] logo.png
[04/25/15 18:29:38] User Command: attended
[04/25/15 18:29:38] DUP Capabilities Value: 39845887 (0x25FFFFF)
[04/25/15 18:29:38] DUP Vendor Software Version: 10.0.0.263
[04/25/15 18:29:38] Local System/Model Compatible with this Package? Yes
[04/25/15 18:29:38] Local System OS Version: 6.2.0.0
[04/25/15 18:29:38] OS Compatible with this Package? Unknown
[04/25/15 18:29:38] Local System OS Language: Unknown
[04/25/15 18:29:38] Language Compatible with this Package? Unknown
[04/25/15 18:29:52] Identified Behavior : attended
[04/25/15 18:29:52] Temporary payload log file name: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP68A4.tmp
[04/25/15 18:29:52] Translated Command Line : Setup_MUP.exe /LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP68A4.tmp"
[04/25/15 18:29:52] Path : C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00
[04/25/15 18:29:52] Identified Behavior : attended
[04/25/15 18:30:31] Append Vendor Software Log: C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP68A4.tmp
[04/25/15 18:30:31]
--- Start of Vendor Software Log ---
[04/25/15 18:30:31] ASCII payload log file detected.
[04/25/15 18:30:31] [2015-4-25 18:29:52] Setup start up.
[2015-4-25 18:29:52] CommandLine is:[/LOG"C:\ProgramData\dell\drivers\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00\DUP68A4.tmp"]
[04/25/15 18:30:31]
--- End of Vendor Software Log ---
[04/25/15 18:30:31] Vendor Software Return Code: 7
[04/25/15 18:30:31] logo.png
[04/25/15 18:30:31] Name of Exit Code: ERROR
[04/25/15 18:30:31] Exit Code set to: 1 (0x1)
[04/25/15 18:30:31] Result: FAILURE
[04/25/15 18:31:33] Open file: C:\ProgramData\Dell\UpdatePackage\Log\5460_Network_Driver_0J8D1_WN_10.0.0.263_A00.txt

reset your system to a time / date before the wireless profile was corrupted?

My iPhone 3Gs, cannot switch on and detect by iTunes after plug in USB

Hi, I am facing a problem, the scenarios as i connect my iphone using my MBP, than it alert me with updating IOS, from my current version IOS 6 to IOS 6.1.2. After a series of downloading the update from iTunes, the phone restarted as normal process, and require me to connect my iphone to iTunes, so, i followed plugged in my usb to my MBP and connect the other end to my iphone. However, iTunes doesn't seems to recorgnize my device, it doen't shown any iphone been connected to my iphone and my iphone stil showing please connect to iTunes. Further, i tried to charge my iphone using charger, and it cannot be charge as well, it seems like my connector spoilt or the connector of my iphone got shut down during the process. I am seriously need help regarding this. Thank you.

Reset the phone (no data loss): press both home and power buttons for up to 45 seconds, releasing when the Apple logo appears.

Cannot switch back to 3G on iPhone 4

Hi everyone,
I have searched for answers all over, but still don't know why my iPhone is behaving like this.
Once I disable 3G in Settings, I cannot make it work again. If I enable it back, the signal goes off and "No service" comes up.
I have tried to reset network settings, restore the firmware, replace the SIM card, restart the phone and so on... the phone will work on 3G for a while (a couple of hours) and then the signal will go off again. The only way to have my iPhone working, is by letting the 3G disabled. It will work fine will Edge like this.
Does anybody know how to fix it?
Thanks!

Thanks diesel vdub! Finally. I hadn't realised that within Reset there were other options so I was under the wrong impression. Resetting my network settings does appear to have done it. I've tried several apps and Safari and they seem to be fine on 3G now. Losing my wifi passwords etc is a small price to pay. I can easily rejoin the ones I use and never use Bluetooth pairings.
THANK YOU!

How do i switch back to my ipod info after syncing with someone elses?

I plugged my Ipod into my sisters computer to download her Itune music onto mine. Now my ipod has all her info on it. Its like mine syned up to hers and all my info is gone. I still have my aps but it wont let me use them and my email info is her email info so i cant check emails. How do I get back to my ipod info?

One you syncing computer, go to iTunes>Preverences>Devices and check the box that says "Prevent iPods...syncing". Then connect the iPod to the computer and restore from backu.
See:
iTunes: Backing up, updating, and restoring iOS software

Cannot FTP TO or FROM safari windown after connected....

Hello All:
For some reason, once connected FTP through safari, it does not let me drag anything from or to the window that is open.
Is there a setting that I am missing or a parameter in the address bar that I forgot to add?
Thanks for any help or advice on this,
Paul

HI,
Try repairing disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

AE extreme dies after connecting USB hard drive and killing it too!!!!!

I finally got around to connecting an external LaCie Rugged hard drive to my AE via the USB port on the back of the AE. Both devices were working properly before I did this. I was intending to activate the drive as a shared drive or a Time Capsule drive. I then opened the Time Machine menu and opened the Preferences menu item and tried to select a backup disk. No disk was found.
Shortly after this step I noticed that the AE light had turned off. I plugged the hard disk into the Mac using a Firewire connection and it was DEAD. Disk Utility will not list the disk. The AE hard boot does not work so it is DEAD too. $400 worth of devices now DEAD and beyond warranty.
Yes I now realize I should not have expected the AE to treat an USB drive as a Time Capsule. Anyone else done this and had the same loss of AE and hard drive?

Hi DP,
The first computer I could actually put my hands on was a DEC PDP8. This was after the punchcard stack era had waned. Booted it up using front panel switches to input binary code to start the tape drives and load the programs. After that came the Data General model that was just as dumb but smaller and noisier. Computers were a pain in the * until I got my first Mac Plus in '86.
Why would a USB hard drive fry the Airport Extreme?
AlphaB

My Keyboard and Mouse freeze after connecting USB device

In the past few weeks I got this situation where my MacBook Air (13" Late 2010 model) would stop responding to the keyboard and trackpad after I connect a USB device (like an external hard disk, or even my iPhone).
I found one (quite inconvenient) solution: if I connect an external USB mouse and keyboard they work, and after a while the built in trackpad and keyboard start working again. But if I do not have an external mouse and keyboard around me, I am quite stuck and only a reboot fixes the situation.
Any idea what might be causing this, or if there is any solution? It is clearly a software issue, as the hardware can be returned to normal state after reboot.
Note: I have the latest OS - Mac OS X Lion 10.7.3 (11D50) and regularly update my software.

I have the same issue, on the same model (late 2010 13" MBA).
I haven't been able to figure out a solution either. Strangely, I recently bought a USB external drive and it *never* causes a freeze upon connection. Only smaller devices (iPod, iPad, FitBit, USB stick) cause it. I need to reboot the computer with the device attached to be able to access it.

[VIA Series] PT880 Neo-FSR hangs during POST after connecting USB device

I "successfully" built a new machine from scratch for the first time. Windows 2000 was installed and working with updates. I connected an iPod to a USB port (during the iTunes software installation) and the machine froze. After a power cycle, the machine will not successfully boot. After the fact, I discovered that the grounding wires on the USB2 connector were no longer connected. I'm not 100% sure that I plugged the iPod into the USB ports connected to USB2, but that's a good assumption.
On reboot, the screen starts normally. When the line "DEL: Setup F11: Boot Menu F12:Network Boot TAB: Logo F10: Flash Recovery" appears, the machine stops. The next line reads "Flash Recovery". The D-Bracket2 indicator lights stop at "Testing Base and Extended Memory".
I'm unable to select any of the options to enter the BIOS setup, etc. I tried clearing the CMOS data using the jumper and I now get the logo screen, but the system still hangs with the same D-Bracket2 lights.
I do not have any spare memory, so if I need to swap it out for diagnostics, I'll have to go shopping.
Is there any way to salvage this board or did I permanently fry it?

No luck on entering BIOS or getting graphic screen to clear.
To clarify, I cleared the CMOS in despiration after the system hung and I couldn't get into BIOS. I don't remember all the details from the original screen (before it was obscured by the graphic!), but I know that there was no "error message" per se. Everything appeared normal except that "Flash Recovery" appeared an additional time below the "DEL: Setup..." line. Before clearing the CMOS, I had no apparent response from any key. (DEL, F10, F11, F12, etc.)
I'm inclined to assume that I managed to actually fry something on the board, but I'm hoping to get that confirmed before buying a replacement.

Cannot switch back to built-in output after connecting USB mic

Similar Messages

Maybe you are looking for