Cannot switch between WPA2 and WPA Enterprise locations.

Hello Everyone,
I have two Wifi locations I use, a WPA2 and a WPA Enterprise. When I switch locations from one to the other it seems that the Airport express seems to reset but does not let go of the active location. I have to manually turn airport off and then on again to have it kick in. Anyone experience this and have a work around?
Thanks in advance,
K.

I am experiencing the same problem.
I have upgraded from 1.1.1.25.14 to 1.1.3.27.66. My Java platform has not changed (1.5.0_06). I renamed my old sqldeveloper directory to sqldeveloper.1 and unzipped the new installation into sqldeveloper. I then pointed it at Java and accepted the option to migrate my settings from the system folder of the previous release. I now have an installation where I have no tabs on my SQL worksheets but I do have tabs on source code windows such as those accessed from within packages.
My OS is Windows XP Professional SP2.
I know the migration worked because all of my connections were imported and my customised editor preferences were preserved in the new installation.
Additional behaviour: if I open 3 SQL worksheets and a source code window I can get to the worksheets by undocking the source code window to its own separate panel 3 times. I cannot then regroup them into one window, though, by dragging and dropping the source code window on top of the worksheets.
Also, when I open a new connection I no longer get a SQL worksheet by default, I have to right click on the connection to open one.
Message was edited by:
Andrew Davies

Similar Messages

Cannot switch between WPA2 and WPA Enterprise WiFi locations.

Hello Everyone,
I have two Wifi locations I use, a WPA2 and a WPA Enterprise. When I switch locations from one to the other it looks as if that the Airport express resets but does not let go of the active location. I have to manually turn airport off and then on again to have it kick in. Anyone experience this and have a work around?
Thanks in advance,
K.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Tabs are not responding in FF4. I cannot switch between tabs and the text of the tab is completely garbled.

The text of the tabs run over each other and are completely unreadable. I cannot move the tabs or click between them. The only thing I can do is to close the tabs which kind of negates the point of having tabs.

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
*[1] http://kb.mozillazine.org/Session_Restore
*[2] http://kb.mozillazine.org/sessionstore.js
*[3] http://kb.mozillazine.org/Multiple_profile_files_created

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

Need Help - Palm Pre Switching between EVDO & 1X from same location

I recently bought Pre and it seems everything is fine on phone except most critical thing, the Wireless Radio. My Pre switches between EVDO and 1X without any reason. My other phone is HTC Touch Pro2 and HTC Touch Pro and neither of those phones switch out of EVDO while I'm online. It seems PRe is doing this without any notification. To run a test I've done this test of visiting same website at same time from same location and my HTC Touch Pro and HTC Touch Pro 2 will hold EVDO without any issue but Pre will keep juggling between EVDO and 1X. Anyone else experienced this on their Pre ?
I've already applied latest firmware to Pre as well as I checked PRL and I'm on same PRL as my Touch Pro 2 but for some reason Pre is the one which has issues trying to remain in EVDO.
I took it to local Sprint store and the storyline after 1 hour of waiting was that phone is working as per design and all radio signals are fine. But because phone size is small it doesnot have as powerful radio as HTC Touch Pro 2, what a piece of BS. HTC Touch Pro is same size or even smaller in certain dimensions than Pre and still it has no issues with EVDO. Probably I'll wait for a week to see if anything changes before sending this one back.
Also one more thing I noted was when I started phone, out of box it was super fast. I was really happy to see the speed of phone but when I updated firmware 1.3.5.1 it seems after that phone takes second or two to respond from the time you tap on it. Which is bit surprising considering that phone is brand new and it got latest firmware update.
Thanks
M
Post relates to: Pre p100eww (Sprint)

My Pre has never gotten stuck in 1XRTT data mode. Eventually, it goes back to EVDO. There's just no way to know when it will happen in either direction. Though, I have noticed that when the connection is previously inactive, and then I need to use it for something, it will often make the switch between the two network types/speeds at the time that it needs to go from dormant to active state. When the switch happens upon going from dormant to active, my Pre will also very often say that it cannot establish a connection to whatever I'm trying to get to, whether it be a web site in a browser or a "client" application of a web site. Most of the time, I will have to hit the appropriate refresh or retry button in the app.
In the Phone preferences, I updated its network settings and PRL just yesterday. Then I completely shut down my Pre to a powered off state via the standard power button menu shut down option. Upon power up and watching it for a while, my Pre still switches back and forth between 1XRTT and EVDO data connections at random for no reason. This happens even while sitting still on its Touchstone on my desk at work.
I agree that the Pre radio might not be up to par, but there is also another possibility - the software. Do we know how the 1XRTT and EVDO connections are driven by software on the Pre? Perhaps the software driving the data connection behind the scenes has issues?

Do I need to reset the router when switching between Win and Mac?

I just set up my new Mac Pro with OSX 1.5.2 and Win XP using Bootcamp and it all works fine, but I have one question about connecting to the internet.
I have a Belkin pre-N wireless router. I am connected using an ethernet cable.
When I switch between OSX and Windows by restarting the computer, is it necessary to restart the router while the computer is off so that when it comes back on it can locate its proper connection?
When I was working on my old PC and my new Mac Pro, I noticed that if I just took the ethernet cable from the Mac or PC and connected it to the other machine, it couldn't find the internet unless I turned off the router, waited a moment and turned it back on again, connected to the other machine and then started the machine.
As the two OSs are now in the same machine, will this continue to happen or can I simply switch between operating systems without having to re-initialize the router and connect it before turning on the computer again?
I haven't tried it yet because I am afraid to screw things up, so I am continuing to turn off, restart the router, re-connect and turn the computer on again. That work perfectly but it is tedious.
Can anyone please advise on whether this is necessary or not?
Thanks a lot for any advice.

Luis:
You should be able to leave the router on and switch between the two OSes. Try it. Worst thing that can happen is that you would need to restart the router.
Axel F.

Need camera raw plugin 8.5 to switch between Lightroom and PS CC. Tried to update CC. It say installing but nothing happens.

Need camera raw plugin 8.5 to switch between Lightroom and PS CC. Tried to update CC. It say installing but nothing happens.

You may need to do a manual install:
http://helpx.adobe.com/x-productkb/multi/camera-raw-applictions-cannot-updated.html

I cannot transform between Arabic and English language in writing

I cannot transform between Arabic and English language in writing >>>> I should every time restart my browser >>>> i need a solution

If you are talking about typing text then make sure that the language toolbar is visible.
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview
In Firefox you can switch the bidi text direction via Ctrl+Shift+X.

Sapmmc - jstart.exe keeps restarting, switching between green and yellow

Hi Friends,
I installed the SAP core server ( as part of SAP convergent charging) , but jstart.exe and dispatcher-1 process in sapmmc are noticed keep switching between yellow and green. when the jstart.exe turns green (all process running) , dispatcher-1 turns yellow (waiting to start) and when dispatcher-1 turns green (restart-yes) , jstart.exe turns yellow (some processes running). Only for a small duration , they both remain green (may be during transition).
Trace File is as below: Iam not sure as what is missing here to be installed, as it is complaining about JEE directory in
C:\usr\sap\C06\CCD09\j2ee\cluster\bin, which is not present., which was never installed as part of the installation.
trc file: "dev_jstart.new", trc level: 1, release: "711"
sysno      09
sid        C06
systemid   562 (PC with Windows NT)
relno      7110
patchlevel 0
patchno    92
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
profile    C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
pid        3596
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      All, egi
Wed Oct 26 04:53:47 2011
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\C06\CCD09\exe\jstart.EXE
arg[ 1] : pf=C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
trc file: "C:\usr\sap\C06\CCD09\work\dev_jstart", trc level: 1, release: "711"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      All, egi
F
F [Thr 3600] Wed Oct 26 04:53:47 2011
F [Thr 3600] *** ERROR => SfCheckJeeVersion: Cannot find JEE binary directory C:\usr\sap\C06\CCD09\j2ee\cluster\bin. [sfxxmain.cpp 848]
trc file: "C:\usr\sap\C06\CCD09\work\dev_jstart", trc level: 1, release: "711"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      All, egi
F [Thr 3600] *** ERROR => SfCheckJeeVersion: Cannot find JEE application directory C:\usr\sap\C06\CCD09\j2ee\cluster\apps. [sfxxmain.cpp 857]
F ********************************************************************************
F Java environment properties (C:\usr\sap\C06\CCD09\work\jstart.jvm)
F    root directory    : C:\usr\sap\C06\CCD09\exe\sapjvm_6
F    vendor            : SAP AG
F    version           : 1.6.0_24
F    cpu               : amd64
F    java vm type      : server
F    java vm version   : 6.1.027 1.6-b07
F    jvm library name : jvm.dll
F    library path      : C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin\server;C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin
F    executable path   : C:\usr\sap\C06\CCD09\exe\sapjvm_6\bin
F ********************************************************************************
F    SAP extensions    : available
F ********************************************************************************
I [Thr 3600] MtxInit: 30002 0 2
dispatcher trace
trc file: "C:\usr\sap\C06\CCD09\work\dev_dispatcher-1", trc level: 1, release: "711"
sysno      09
sid        C06
systemid   562 (PC with Windows NT)
relno      7110
patchlevel 0
patchno    92
intno      20020600
make       multithreaded, Unicode, 64 bit, optimized
profile    C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
pid        428
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      All, egi
Wed Oct 26 06:22:16 2011
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\C06\CCD09\exe\jstart.EXE
arg[ 1] : -appTrc
arg[ 2] : -nodeId=0
arg[ 3] : pf=C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
arg[ 4] : -hostvm
arg[ 5] : -nodeName=dispatcher-1
arg[ 6] : -file=C:\usr\sap\C06\CCD09\config\jstart.config
arg[ 7] : -jvmFile=C:\usr\sap\C06\CCD09\work\jstart.jvm
arg[ 8] : -traceFile=C:\usr\sap\C06\CCD09\work\dev_dispatcher-1
arg[ 9] : -javaOutFile=C:\usr\sap\C06\CCD09\work\jvm_dispatcher-1.out
F
F Wed Oct 26 06:22:16 2011
F ********************************************************************************
F Java environment properties
F    root directory    : C:\usr\sap\C06\CCD09\exe\sapjvm_6
F    vendor            : SAP AG
F    version           : 1.6.0_24
F    cpu               : amd64
F    java vm type      : server
F    java vm version   : 6.1.027 1.6-b07
F    jvm library name : jvm.dll
F    library path      : C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin\server;C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin
F    executable path   : C:\usr\sap\C06\CCD09\exe\sapjvm_6\bin
F    SAP extensions    : available
F ********************************************************************************
I [Thr 3828] MtxInit: 10000 0 2
M [Thr 3828] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=202;cur=2048)
M [Thr 3828] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M [Thr 3828] CCMS: Initalized shared memory of size 60000000 for monitoring segment.
M [Thr 3828] CCMS: Checking Downtime Configuration of Monitoring Segment.
M
M [Thr 3828] Wed Oct 26 06:22:17 2011
M [Thr 3828] CCMS: AlMsUpload called by wp 1004.
M [Thr 3828] CCMS: AlMsUpload failed for C:\usr\sap\C06\CCD09\log\ALMTTREE.DAT.
M [Thr 3828] CCMS: CCMS Monitoring Initialization finished, rc=0.
F
Please help.
Thanks.
Edited by: Zain Ahmed on Oct 26, 2011 9:07 PM

HI,
Import the SAP profiles in SAP transaction RZ10: Utilities - Import profiles - of Active Server
OR
Check what messages do you have in jvm_server0.out, dev_server0.out and bootstrap traces,
also have a look at the note 142100.
The first problem is that in the SCS instance there are no running enqueue server as its starting line have no line break at the end in the start profile. Without this NT cannot parse the line. After adding the line break the enqueue server could start.
The second problem is that in the global dispatcher configuration for the LockingManager the en.port was set to 3201 instead of 3200 (which is correct as the SCS instance has the intance number 00).
After correcting these problems the J2EE engine could be started fine.
see similar threads
Dispatcher - Running but Dialog Queue info unavailable
/thread/96588 [original link is broken]
logon710
Message server not starting
Thanks
Swarup

When frequently switching between mobile and desktop view

When I frequently switching between mobile and desktop view I have to open the layers every time since they get closed/collapsed. Adobe may need to fix it for the next version.

You can use CTRL+# to switch between Code and Design View.
By the way, this is the Dreamweaver Application Development forum which deals with questions about using server-side scripting languages like PHP or ColdFusion. General Dreamweaver questions should be posted in the regular Dreamweaver General Discussions forum.
And while I´m at it: please use descriptive headlines such as "how to switch between Code and Design View" for your posts -- mentioning your screen name "Goula129" is not helpful to other users.

How to quickly switch between straight and curly quotes?

I've recently moved from a Windows XP machine with MS Office to a Mac Pro with Pages.
For the kinds of documents I typically work on, sometimes I need to have straight quotes, and sometimes curly quotes. With MS Word, I was able to create a couple of macros that would switch these preferences for me. With these macros linked to an icon in the toolbar, switching between straight and curly quotes was as easy as clicking a button.
Now I'm looking for a way to do this -- or something like it -- with Pages.
I know how to switch back and forth using the preferences menu, of course, but I'm looking for something quicker and simpler, since I often have to make this change several times a day.
Can Automator do something like this? Or is there another way?
-- Eric

Turn off the auto correction and you can type Curly quotes with:
left single ‘ option ]
right single ’ option shift ]
left double “ option [
right double ” option shift [
If you want the French quotes « and » they are option and option shift |
Peter

Can't switch between fill and outline.

Here's the problem: I'm on an iMac, new, trying to use illustrator CS5. after using CS3 for a few years. In CS5, if I draw a shape, flat, in the illustration, then try to give it an outline, or change the outline, or do anything with the outline, I can't. If I click on the Shape tools in the toolbox and draw out an oval, for example, I can switch between outline and fill without any problems. Select shape, go to toolbox, select curved arrow for switching from one to the other. That's it. But if I draw a freehand shape, then try it, i can't do it. THIS IS A BIG CHANGE FROM PREVIOUS VERSIONS OF THE APP. GET IT? What is the problem? If it's something I have done, fine, tell me and I'll fix it. I tried calling Adobe support in Bangalore, and it took 30 minutes just to get the problem thoroughly appreciated by the techies. They just couldn't get the idea for half an hour! I had to go over it 4 or 5 times. And they couldn't come up with an answer. they were no help at all. I'm hoping the forum will yield better results. This is pathetic, guys. Your 90-day tech support is a worthless piece of crap, guys. The only tech support we have is this catch-as-catch-can forum. I've been using Illustrator since 1987, (illustrator 88) believe it or not, it's true. And I've always been able to get tech support to cure the ills. Not any more. Is that the way Adobe plans to offer tech support? if there were a way to contact Adobe Tech Support by going around Adobe Bangalore, i would use it. But, alas, I am stuck with this.

Dear Monika and Mylenium: I figured out part of the problem, but not the solution: The shape I had drawn -and coudn't switch between fil and stroke on-is one I had already done a gradient mesh on, too. I had later abandoned the gradient mesh by using the option key to delete mesh lines, but that didn't take the shape all the way back to its original flat state. So it wasn't a plain drawn shape any more. So how do I release the gradient mesh to get back to a flat shape? I'm also having trouble keeping the shapes in RGB or CMYK mode-they keep defaulting back to greyscale. Could that also be a symptom of using gradient mesh? Note: I'm using gradient mesh for the very first time now; I've never used it before. It seems to leave a lot of unexpected baggage behind. I would send a screen shot, but if I start up Grab or Voila, all the AI pallets go away, and that's half the information. So how do I control gradient mesh?

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from Camelotand Matt Clifton
Could it be that CORRECT ANSWER needs better defining by Apple?
That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

JSF / Switch between HTTP and HTTPS

Hello!
I want to switch between HTTP and HTTPS using JSF.
Under Apache Struts framework I can use struts extension "sslext.jar" to configure switching between http and https in one web application.
e.g. Login-jsp should be secured, all other jsp's should run unsecured.
Any ideas?
regards
Harald.

Thanks,
I made the necessary enhancement for the second phase, password confirmation required when return to SSL zone after leaving it after a succesful login.
I did the following:
1) create a class in the application scope and/or singleton class with the servlet paths that require SSL
2) create a plugin that reads ActionConfigs from the ModuleConfig
3) create a filter that sets a request scope flag that says that password must re-entered.
Code Extracts:
1) MainshopContainer application level parameter singleton class:
private static HashMap sslZoneMap = new HashMap(50); // key = servlet path of request, example /login.do
public boolean isInSSLZone(String servletPath)
return this.sslZoneMap.containsKey(servletPath);
public void addToSSLZone(String servletPath)
this.sslZoneMap.put(servletPath,null);
public int getNumberOfActionsInSSLZone()
return this.sslZoneMap.size();
2) Struts plugin
add a call to loadSSLZoneMap in plugin init method:
loadSSLZoneMap(config, mainshopContainer);
private void loadSSLZoneMap(ModuleConfig config, MainshopContainer mainshopContainer)
throws ServletException
try {
ActionConfig[] actionConfigs = config.findActionConfigs();
for (int i = 0; i < actionConfigs.length; i++)
if (actionConfigs.getParameter().indexOf("/jsp/account/") < 0) // /account/* = URL path for SSL zone
// not found = not ssl zone
System.out.println("loadSSLZoneMap, following actionConfigs excluded from SSL Zone: "+actionConfigs[i].getPath());
else
// found = ssl zone
String servletPath = actionConfigs[i].getPath()+".do";
mainshopContainer.addToSSLZone(servletPath);
System.out.println("loadSSLZoneMap, following servletPath added to SSL Zone: "+servletPath);
System.out.println("loadSSLZoneMap, number of actions in SSL Zone: "+mainshopContainer.getNumberOfActionsInSSLZone());
catch (Exception ex)
ex.printStackTrace();
throw new ServletException("Exception caught in loadSSLZoneMap: "+ex.toString()+" Initialization aborted.",ex);
3)
public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain)
throws IOException, ServletException {
HttpServletRequest req = (HttpServletRequest) request;
HttpServletResponse res = (HttpServletResponse) response;
String servletPath = req.getServletPath();
boolean secure= this.mainshopContainer.isInSSLZone(servletPath);
The wole picture:
The filter adds a RequestDTO object that includes all request parameters, one of them is the secure flag.
I have a session scope class UserContainer that includes all the session parameters, one of them is the lastRequestDTO.(last made request)
At the end of all my jsp's I set the lastRequestDTO variable.
In that method I set the passwordConfirmationRequired flag if needed:
public void setLastRequestDTO(RequestDTO _lastRequestDTO)
if (this.lastRequestDTO != null && this.lastRequestDTO.isSecure() != _lastRequestDTO.isSecure())
this.setPasswordConfirmationRequired(true);
this.lastRequestDTO = _lastRequestDTO;
I read the passwordConfirmationRequired in all my jsp's in the SSL zone that allow editing or deleting and if that flag is true, a valid password must be re-entered in order to make the updates.
When the password is OK I reset the passwordConfirmationRequired to false.
I need some help for the first phase, that is SSL setup for all actions related to jsp's with url path /account/*
I tought I could define it in the web.xml:
<security-constraint>
<web-resource-collection>
<web-resource-name>All Account Related Pages</web-resource-name>
<url-pattern>/account/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
but that doesn't work and finnaly understood why:
Example: /WEB-INF/jsp/account/login.jsp corresponds to /login.do
The url pattern /account/* at the container level is never encountered.
Is it allowed to declare the following action path: /account/login instead of /login?
If yes I could add following prefix /account to all my action paths and forward paths and this could resolve my problem.
What's your opinion?
If no, would your library resolve this?
Will all the Struts/JSP/JSTL url generating tags pick-up the required protocol (http/https) according to your configuration file?
Regards
Fred

Is there an easy way to switch between ehternet and wifi connection without having to disconnect the ethernet cable?

Hi All
Was wondering if there is an easy way to switch between ethernet and wifi connection on Apple TV without having to disconnect the ethernet cable. The reason I ask is that I find it quicker to use my ethernet connection via a Netgear Powerline Home Theatre Set-up to stream Trailers and Movies on the Apple TV, however this is no good when connecting directly to my Mac to stream music or TV shows in iTunes, so revert to the wifi connection that I created on my Time Capsule to do this.
Would be handy if Apple TV had a menu option where you could manually change the connection type depending on what you were doing, as per above scenario.
Cheers
Brett

brettfromseabrook wrote:
Hi All
Was wondering if there is an easy way to switch between ethernet and wifi connection on Apple TV without having to disconnect the ethernet cable.
Unfortunately not.

Cannot switch between WPA2 and WPA Enterprise locations.

Similar Messages

Maybe you are looking for