Cannot switch SMB codepage setting

Hi all,
This is my first post. Sorry for my poor English.
In "Server Admin" tool - "SMB" service - "Advanced" settings page,
I'd like to switch the setting for SMB codepage from "Latin US (437)" to "Japanese SJIS (932)", but I can't.
When I choose "Japanese SJIS (932)" and click "Save", the setting is reset to "Latin US (437)" automatically.
I've never seen such a phenomenon in my Panther Server (v10.3.9) environment.
Is this my mistake or not?
FYI;
I've installed my Leopard Server newly, and its structure is "Advanced".
AFP, DHCP, FTP and SMTP are also run.
Finally, so sorry if the question like this has already been solved in another discussion page/s.
Message was edited by: Fanoar

I can confirm that I have the same problem be it any type of configuration in 10.5.0 and 10.5.1 servers. Manually editing /etc/smb.conf didn't change it in the admin interface. (Line: dos charset = 437). After manual edit, change in admin still doesn't change it in the smb.conf. But it stays okay in the smb.conf file, stopped and started SMB service and it stays correct in the smb.conf file. However,...
manually editing /var/run/smb.conf changed it for admin interface.
Which is included from /etc/smb.conf. This will overrule the other value as this include statement comes later... Touching the admin interface changes back /var/run/smb.conf line: dos charset = CP437. So the big question is, where does the admin interface get this default from?

Similar Messages

  • HT4847 Hello my IPAD cannot be backed up because there is not enough icloude storage available. Now i cannot go to setting because because the IPAD is frozen and it cannot switch off. How do i unfreez the ipad4

    Hello my IPAD cannot be backed up because there is not enough icloude storage available. Now i cannot go to setting because because the IPAD is frozen and it cannot switch off. How do i unfreez the ipad4

    Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

  • Cannot switch base units on Goods Receipt PO copied from Purchase Order

    Hi,
    I am wondering if there is a simple trick or setting for this or if we have to use a UDF/FMS...
    When using Uom for sales and purchasing, you cannot switch between Yes and No for base units on the target document(GRPO) when copying a PO to GRPO.
    For example, enter a purchase order selecting 'No' for base units and enter quantity 1 for item with Uom case(25 pcs in a case). 25 are ordered. If the warehouse receives 23 instead of a full case from the supplier,  they want to be able to enter 23 on the GRPO(copied from PO). They don't want the warehouse staff calculating what percentage to put in for quantity (23/25 = 0.92),  they would just like them to use the drop down box and change the base units to Yes and receive the quantity 23 units.
    Any suggestions?

    Hi,
    How often this would happen?  If it is very frequent, my suggestion would be considering it when you create PO.  You know, if you could change that option, the link between PO and GRPO will be broken.  It is not recommended.
    Thanks,
    Gordon

  • Since I installed Lion, I cannot switch from previous to next page in Chrome nor Firefox with the "swippe" on my mouse.

    Since I installed Lion, I cannot switch from previous to next page in Chrome nor Firefox. Swipping on my mouse, it switches screens instead of the previous behavior.  How do I set it back to the function "previous/next"? Thanks

    page switching is now a two finger gesture but I have heard this does not work in Chrome and Firefox, they will need an update...

  • Wifi and bluetooth function cannot switch on

    My phone cannot switch on the bluetooth and wifi function. Already try restore factory setting. Still cannot on. My phone had drop before this but that time nothing happen just crack behind.. 2 month later just suddenly the bluetooth and wifi function cannot switch on at all.

    You should contact your local sony team:
    http://www.sonymobile.com/global-en/support/contact-us/
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Invisible windows appears when trying to open a new window. These windows are listed in the Window list, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.

    I cannot open a new window for FireFox.
    Invisible windows appears when trying to open a new window. These windows are listed in the Window list on the menu, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.
    The Downloads Window cannot be accessed either.
    This is very annoying. Is this a bug? Or is there a fix.

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • My Iphone 4s i cannot switch the wifi or bluetooth on

    I have the following problems with my Iphone 4s 1 I cannot switch wifi or bluetooth on either in settings or using sari when i use sari she says they are switched on tho they are clearly not also cannot adjust volume using buttons and it will not switch to landscape for video or pics any help would be great

    Hi Devilish70,
    Welcome to Apple Support Communities.
    It sounds like your iPhone has a hardware or software issue the is making Wi-Fi grayed out and locking the viewing-orientation. The following two articles provide tips that may resolve the issue without setting up service.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Display does not go into landscape mode
    Remember that photos, webpages, and applications will not change viewing-orientation modes when iPhone is lying flat. Hold iPhone vertically to switch between portrait and landscape modes or vice versa.
    Verify that rotation lock is not on.
    To test, open the Calculator application while holding the iPhone vertically (portrait mode). The standard calculator should appear. Then rotate the iPhone to a horizontal position (landscape mode), and the scientific calculator should appear.
    Note: Certain apps and features may support only one mode, landscape or portrait. For example, the Videos app plays video in landscape mode, and Reminders uses only portrait mode. Not all applications on iPhone use landscape mode.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Cheers!
    -Jason

  • IPhone 3GS stuck and I cannot switch it off. Screen shows an USB plug connecting to iTunes.

    My iPhone 3GS stuck and i cannot switch it off. Screen shows an USB plug connecting to iTunes.

    this usually appears when your iphone is not registered correctly with apple/itunes so plug it in to your computer and try setting it up if it gives you the correct prompt. if not try to restore and sync. usually tis problem appears when your iphone has no sim card or is not registered correctly. in this case you need to contact your carrier and set up an account. if you are trying to use it without a service or sim card then unless you go through some sketchy program of hacking it it is worthless to you without a sim or service plan. i have the original iphone1 i got from a buddy of mine i used as an ipod before getting an iphone4 and if i took the sim out this message appears. if you do have a sim and a service plan than there might be a problem with the phone reading the sim card you you can go into your service provider's store and request a new sim to see if that works.
    I am sorry if none of this is helpful for i have no other suggestions.

  • My ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance

    my ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance

    Welcome to Apple Support Communities
    Hold Sleep and Home buttons for 10 seconds until the device restarts

  • Error message "Data cannot be maintained for set type COMM_PR_PUR_1

    Hi
    While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message.  How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
    For curioisity next I selected all such error logs & deleted. It gave me one warning (some inconstinecies error) which I ignored. After that I checked SMQ1 of R3 & SMQ2 of SRM. No log
    But I observed a strange thing. Whatever material codes I am creating it is going straightway to SRM without running R3AS transaction. I checked R3AM1, selected the row and cancelled. But still going without any interferrance. Why ? How shall I stop this.
    Thanks

    Hello,
    >
    BNR wrote:
    > Hi
    > While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message.  How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
    >(...)
    Have a look at OSS note 1049693 - Data cannot be maintained for set type COMM_PR_PUR_1.
    Regards.
    Laurent.

  • How can I switch on my Apple TV speakers when it asks "multiple speakers" I cannot switch off my computer speakers and switch on my Apple TV speakers so cannot get airplay to work?

    How can I get my Apple TV airplay to work from my PC.  On the airplay symbol it says Multiple Peakers please choose but I cannot switch off my computer speakers and switch on my Apple TV speakers so cannot get airplay to work from my PC.  Everything is OK when using my Ipod touch.

    Don't use Multiple Speakers option and just choose the AppleTV
    What are you trying to Airplay? If it's iTunes content it's simpler to 'pull' the stream from the Computers icson on AppleTV by selecting the libarry and media.
    If you are attempting to Airplay the desktop you can't.

  • HT4061 I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

    Can anyone help us please?
    I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

    Press and hold both the home button and lock button until the apple logo shows up.

  • Your apple ID (email address) cannot be used to set up imessage at this time

    My iMessage recently stopped working. When I attempt to log back in it tells me "your apple ID (email address) cannot be used to set up imessage at this time" then gives me a code to share with Apple support. (See screen shot). Any suggestions?

    There is no official public documentation of that error message as far as I know, but according to reports, it can mean (at least sometimes) that the same Apple ID is being used with the iTunes Store or one of the other Apple content stores, and the payment method is invalid. Sign in to the store and review your account. You do not, of course, have to provide any billing information to set up an account to use only with iMessage, as it's a free service.
    Otherwise, do what the error message tells you to do.

  • How do you switch output sounds   set to my external monitor that is connected via HDMI.

    How do you switch output sounds   set to my external monitor that is connected via HDMI. 

    Hello gail from Ajijic,
    If you'd like to change the audio output of your Mac, you can do so by accessing the Sound preferences in your System Preferences.
    Before you start, open the Output pane of Sound preferences (choose Apple menu > System Preferences, click Sound, then click Output).
    Choose a sound output device
    From the list of sound output devices, select the one you want to use. All sound output devices available to your Mac are listed, including the computer’s internal speakers, devices plugged into your computer’s sound port (), USB speakers, and AirPlay devices.
    For any device plugged into the computer’s sound port, choose Headphones.
    OS X Yosemite: Adjust your computer’s sound output settings
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • Iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    iphone not appears at Itunes after updating to ios 6.0.2 and I cannot switch on Iphone - there's only "connect USB to Itunes" icon shown. What should I do?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

Maybe you are looking for