Cannot switch to tty with CTRL+ALT+F?

Hi everybody,
I'm sitting in front of a fresh archlinux installation with kdemod installed. I notice that I can't switch to the terminals with CTRL+ALT+F?. I always used this kind of switching without configuring anything, so what could have gone wrong?
Thanks for any suggestions...
EDIT: by accident I wrote the german "STRG" instead of "CTRL"
Last edited by Kei (2007-07-09 16:40:00)

i've got the same problem here
I can kill sessions via CTRL+ALT+BKSP and navigate from vt1 to vt2 etc.., but not from X to any other terminals!
Global shortcuts don't seem to work either, might be a related problem!?
Output from xev for CTRL, ALT, F1
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1772087, (-158,305), root:(878,360),
state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1774643, (-158,305), root:(878,360),
state 0x0, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1774702, (-158,305), root:(878,360),
state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1776252, (-158,305), root:(878,360),
state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1776307, (-158,305), root:(878,360),
state 0x8, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1776962, (-158,305), root:(878,360),
state 0x0, keycode 67 (keysym 0xffbe, F1), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyRelease event, serial 31, synthetic NO, window 0x2c00001,
root 0x4c, subw 0x0, time 1777014, (-158,305), root:(878,360),
state 0x0, keycode 67 (keysym 0xffbe, F1), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
and my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "uk"
Option "XkbOptions" "grp:ctrl_shift_toggle"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SHP"
ModelName "139f"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
Option "AGPMode" "8"
Option "EnablePageFlip" "1"
Option "ColorTiling" "1"
Option "UseFastTLS" "2"
VendorName "ATI Technologies Inc"
BoardName "Radeon R250 [Mobility FireGL 9000]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
Option "DontVTSwitch" "False"
Option "DontZap" "False"
EndSection

Similar Messages

  • Can't switch to console with ctrl+alt+f? anymore

    i installed the lastest xorg packages and i am using fluxbox-cvs and i can't switch to console with ctrl+alt+f? anymore - any ideas?

    no, but i did have to make that switch from keyboard to kbd to satisfy the new xorg config...i'll try all that but i am away from my box at the mo
    thanks for the on topic post
    (as much as i would like to flame oscar about his/her choice of wm...i can't be f*cked.  aside from the slit hang problem i have not seen a bug in cvs that has remained for any significant time at all.  besides, it's pre 1.0, it's allowed to be buggy)
    .:after thought:.
    fluxbox = overgrown bug
    kde and gnome = overgrown
    .:after after thought:.
    i see you are a gnome user, how ironic you are,                 
    ah...flame war! 

  • Can't switch VT's with Ctrl+Alt+Fx or Ctrl+Alt+backspace terminate

    Ctrl+Alt+F2 doesn't seem to register. It's been a long term issue I have had for years. I've tried all the various fixes.
    I can manually change to virtual terminals without issues using:
    sudo chvt 2
    Once I'm in a VT I can use Alt+Fx to change between them, until I go back into Xorg. So it's unlikely to be a graphics driver problem, most other people with similar issues complain of getting a blank screen.
    Although without sudo I get
    # chvt 2
    Couldn't get a file descriptor referring to the console.
    I have the following in /etc/X11/xorg.conf.d/15-forcevt.conf
    Section "ServerFlags"
    Option "HandleSpecialKeys" "always"
    Option "DontVTSwitch" "false"
    Option "DontZap" "false"
    EndSection
    Section "InputClass"
    Identifier "Keyboard Defaults"
    MatchIsKeyboard "yes"
    Option "XkbOptions" "terminate:ctrl_alt_bksp"
    EndSection
    A also enabled the terminate option in gnome-tweak-tool.
    xmodmap -pke has the following:
    keycode 67 = F1 F1 F1 F1 F1 F1 XF86Switch_VT_1
    keycode 68 = F2 F2 F2 F2 F2 F2 XF86Switch_VT_2
    Nothing is printed in Xorg logs when I try pushing the keys.
    I'm using SLIM (although I tried manually via startx), AwesomeWM (also tried fluxbox with a blank conf), nvidia (proprietary), UEFI.
    [ 2490.220]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 2490.225] X Protocol Version 11, Revision 0
    [ 2490.227] Build Operating System: Linux 3.18.6-1-ARCH x86_64
    [ 2490.229] Current Operating System: Linux ender 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
    [ 2490.229] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux root=UUID=ff84efeb-e43f-47fe-a14d-07894feb0013 rw rootflags=subvol=@ quiet
    [ 2490.233] Build Date: 14 March 2015 06:45:50PM
    [ 2490.234]
    [ 2490.236] Current version of pixman: 0.32.6
    [ 2490.240] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2490.240] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2490.247] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 1 10:44:03 2015
    [ 2490.249] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2490.250] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2490.250] (==) ServerLayout "Layout0"
    [ 2490.250] (**) |-->Screen "Screen0" (0)
    [ 2490.250] (**) | |-->Monitor "Monitor0"
    [ 2490.251] (**) | |-->Device "Device0"
    [ 2490.251] (**) |-->Input Device "Keyboard0"
    [ 2490.251] (**) |-->Input Device "Mouse0"
    [ 2490.251] (**) Option "DontVTSwitch" "false"
    [ 2490.251] (**) Option "DontZap" "false"
    [ 2490.251] (**) Option "Xinerama" "0"
    [ 2490.251] (==) Automatically adding devices
    [ 2490.251] (==) Automatically enabling devices
    [ 2490.251] (==) Automatically adding GPU devices
    [ 2490.251] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2490.251] Entry deleted from font path.
    [ 2490.251] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2490.251] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2490.251] Entry deleted from font path.
    [ 2490.251] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2490.251] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 2490.251] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2490.251] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 2490.251] (WW) Disabling Keyboard0
    [ 2490.251] (WW) Disabling Mouse0
    [ 2490.251] (II) Loader magic: 0x815d80
    [ 2490.251] (II) Module ABI versions:
    [ 2490.251] X.Org ANSI C Emulation: 0.4
    [ 2490.251] X.Org Video Driver: 19.0
    [ 2490.251] X.Org XInput driver : 21.0
    [ 2490.251] X.Org Server Extension : 9.0
    [ 2490.254] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 2490.254] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2490.254] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 2490.258] (--) PCI:*(0:1:0:0) 10de:1180:10de:0969 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 2490.258] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2490.258] (II) LoadModule: "glx"
    [ 2490.258] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2490.268] (II) Module glx: vendor="NVIDIA Corporation"
    [ 2490.268] compiled for 4.0.2, module version = 1.0.0
    [ 2490.268] Module class: X.Org Server Extension
    [ 2490.268] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
    [ 2490.268] (II) LoadModule: "nvidia"
    [ 2490.268] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 2490.269] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 2490.269] compiled for 4.0.2, module version = 1.0.0
    [ 2490.269] Module class: X.Org Video Driver
    [ 2490.269] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
    [ 2490.269] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 2490.269] (++) using VT number 1
    [ 2490.269] (--) controlling tty is VT number 1, auto-enabling KeepTty
    [ 2490.269] (II) Loading sub module "fb"
    [ 2490.269] (II) LoadModule: "fb"
    [ 2490.269] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2490.269] (II) Module fb: vendor="X.Org Foundation"
    [ 2490.269] compiled for 1.17.1, module version = 1.0.0
    [ 2490.269] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2490.269] (II) Loading sub module "wfb"
    [ 2490.269] (II) LoadModule: "wfb"
    [ 2490.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 2490.270] (II) Module wfb: vendor="X.Org Foundation"
    [ 2490.270] compiled for 1.17.1, module version = 1.0.0
    [ 2490.270] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2490.270] (II) Loading sub module "ramdac"
    [ 2490.270] (II) LoadModule: "ramdac"
    [ 2490.270] (II) Module "ramdac" already built-in
    [ 2490.270] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 2490.270] (==) NVIDIA(0): RGB weight 888
    [ 2490.270] (==) NVIDIA(0): Default visual is TrueColor
    [ 2490.270] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2490.270] (**) NVIDIA(0): Option "Stereo" "0"
    [ 2490.270] (**) NVIDIA(0): Option "SLI" "Off"
    [ 2490.270] (**) NVIDIA(0): Option "MultiGPU" "Off"
    [ 2490.270] (**) NVIDIA(0): Option "BaseMosaic" "off"
    [ 2490.270] (**) NVIDIA(0): Stereo disabled by request
    [ 2490.270] (**) NVIDIA(0): NVIDIA SLI disabled.
    [ 2490.270] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
    [ 2490.271] (**) NVIDIA(0): Option "MetaModes" "DVI-I-1: nvidia-auto-select +1280+0, DVI-D-0: nvidia-auto-select +0+416"
    [ 2490.271] (**) NVIDIA(0): Enabling 2D acceleration
    [ 2490.690] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
    [ 2490.692] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 680 (GK104) at PCI:1:0:0 (GPU-0)
    [ 2490.692] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 2490.692] (--) NVIDIA(0): VideoBIOS: 80.04.09.00.01
    [ 2490.692] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 2490.709] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680 at PCI:1:0:0
    [ 2490.709] (--) NVIDIA(0): CRT-0
    [ 2490.709] (--) NVIDIA(0): Samsung SMS27A850T (DFP-0) (boot, connected)
    [ 2490.709] (--) NVIDIA(0): DFP-1
    [ 2490.709] (--) NVIDIA(0): DFP-2
    [ 2490.709] (--) NVIDIA(0): Samsung SyncMaster (DFP-3) (connected)
    [ 2490.709] (--) NVIDIA(0): DFP-4
    [ 2490.709] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [ 2490.710] (--) NVIDIA(0): Samsung SMS27A850T (DFP-0): Internal TMDS
    [ 2490.710] (--) NVIDIA(GPU-0): Samsung SMS27A850T (DFP-0): 330.0 MHz maximum pixel clock
    [ 2490.710] (--) NVIDIA(0): DFP-1: Internal TMDS
    [ 2490.710] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 2490.710] (--) NVIDIA(0): DFP-2: Internal TMDS
    [ 2490.710] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
    [ 2490.710] (--) NVIDIA(0): Samsung SyncMaster (DFP-3): Internal TMDS
    [ 2490.710] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-3): 330.0 MHz maximum pixel clock
    [ 2490.710] (--) NVIDIA(0): DFP-4: Internal DisplayPort
    [ 2490.710] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
    [ 2490.710] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2490.710] (**) NVIDIA(0): device Samsung SMS27A850T (DFP-0) (Using EDID frequencies
    [ 2490.710] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
    [ 2490.710] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
    [ 2490.710] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 2490.710] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
    [ 2490.710] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 2490.710] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 2490.710] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 2490.710] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    [ 2490.712] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2490.712] (**) NVIDIA(0): device Samsung SyncMaster (DFP-3) (Using EDID frequencies
    [ 2490.712] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 2490.713] (II) NVIDIA(0): Validated MetaModes:
    [ 2490.713] (II) NVIDIA(0):
    [ 2490.713] (II) NVIDIA(0): "DVI-I-1:nvidia-auto-select+1280+0,DVI-D-0:nvidia-auto-select+0+416"
    [ 2490.713] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1440
    [ 2490.742] (--) NVIDIA(0): DPI set to (125, 114); computed from "UseEdidDpi" X config
    [ 2490.742] (--) NVIDIA(0): option
    [ 2490.742] (--) Depth 24 pixmap format is 32 bpp
    [ 2490.743] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 2490.743] (II) NVIDIA: access.
    [ 2490.746] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 2490.746] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 2490.746] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 2490.746] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 2490.746] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 2490.746] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 2490.746] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 2490.746] (II) NVIDIA(0): Config Options in the README.
    [ 2490.761] (II) NVIDIA(0): Setting mode "DVI-I-1:nvidia-auto-select+1280+0,DVI-D-0:nvidia-auto-select+0+416"
    [ 2490.853] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 2490.853] (==) NVIDIA(0): Backing store enabled
    [ 2490.853] (==) NVIDIA(0): Silken mouse enabled
    [ 2490.853] (**) NVIDIA(0): DPMS enabled
    [ 2490.853] (II) Loading sub module "dri2"
    [ 2490.853] (II) LoadModule: "dri2"
    [ 2490.853] (II) Module "dri2" already built-in
    [ 2490.853] (II) NVIDIA(0): [DRI2] Setup complete
    [ 2490.853] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 2490.853] (--) RandR disabled
    [ 2490.856] (II) Initializing extension GLX
    [ 2490.856] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event7)
    [ 2490.914] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2490.914] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 2490.914] (II) LoadModule: "evdev"
    [ 2490.914] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2490.914] (II) Module evdev: vendor="X.Org Foundation"
    [ 2490.914] compiled for 1.17.1, module version = 2.9.2
    [ 2490.914] Module class: X.Org XInput Driver
    [ 2490.914] ABI class: X.Org XInput driver, version 21.0
    [ 2490.915] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0
    [ 2490.915] (II) Using input driver 'evdev' for 'Power Button'
    [ 2490.915] (**) Power Button: always reports core events
    [ 2490.915] (**) evdev: Power Button: Device: "/dev/input/event7"
    [ 2490.915] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2490.915] (--) evdev: Power Button: Found keys
    [ 2490.915] (II) evdev: Power Button: Configuring as keyboard
    [ 2490.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event7"
    [ 2490.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2490.915] (**) Option "xkb_rules" "evdev"
    [ 2490.915] (**) Option "xkb_model" "pc104"
    [ 2490.915] (**) Option "xkb_layout" "us"
    [ 2490.915] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 2490.940] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 2490.940] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2490.940] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 2490.941] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 31 paused 0
    [ 2490.941] (II) Using input driver 'evdev' for 'Power Button'
    [ 2490.941] (**) Power Button: always reports core events
    [ 2490.941] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 2490.941] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2490.941] (--) evdev: Power Button: Found keys
    [ 2490.941] (II) evdev: Power Button: Configuring as keyboard
    [ 2490.941] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8/event6"
    [ 2490.941] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2490.941] (**) Option "xkb_rules" "evdev"
    [ 2490.941] (**) Option "xkb_model" "pc104"
    [ 2490.941] (**) Option "xkb_layout" "us"
    [ 2490.941] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
    [ 2490.942] (II) No input driver specified, ignoring this device.
    [ 2490.942] (II) This device may have been added with another device file.
    [ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
    [ 2490.942] (II) No input driver specified, ignoring this device.
    [ 2490.942] (II) This device may have been added with another device file.
    [ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event20)
    [ 2490.942] (II) No input driver specified, ignoring this device.
    [ 2490.942] (II) This device may have been added with another device file.
    [ 2490.942] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event21)
    [ 2490.942] (II) No input driver specified, ignoring this device.
    [ 2490.942] (II) This device may have been added with another device file.
    [ 2490.942] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
    [ 2490.942] (II) No input driver specified, ignoring this device.
    [ 2490.942] (II) This device may have been added with another device file.
    [ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
    [ 2490.943] (II) No input driver specified, ignoring this device.
    [ 2490.943] (II) This device may have been added with another device file.
    [ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
    [ 2490.943] (II) No input driver specified, ignoring this device.
    [ 2490.943] (II) This device may have been added with another device file.
    [ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
    [ 2490.943] (II) No input driver specified, ignoring this device.
    [ 2490.943] (II) This device may have been added with another device file.
    [ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
    [ 2490.943] (II) No input driver specified, ignoring this device.
    [ 2490.943] (II) This device may have been added with another device file.
    [ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event15)
    [ 2490.943] (II) No input driver specified, ignoring this device.
    [ 2490.943] (II) This device may have been added with another device file.
    [ 2490.943] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event16)
    [ 2490.943] (II) No input driver specified, ignoring this device.
    [ 2490.943] (II) This device may have been added with another device file.
    [ 2490.944] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
    [ 2490.944] (II) No input driver specified, ignoring this device.
    [ 2490.944] (II) This device may have been added with another device file.
    [ 2490.944] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/event0)
    [ 2490.944] (**) HID 1017:0002: Applying InputClass "evdev keyboard catchall"
    [ 2490.944] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
    [ 2490.944] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
    [ 2490.944] (II) Using input driver 'evdev' for 'HID 1017:0002'
    [ 2490.944] (**) HID 1017:0002: always reports core events
    [ 2490.944] (**) evdev: HID 1017:0002: Device: "/dev/input/event0"
    [ 2490.945] (--) evdev: HID 1017:0002: Vendor 0x1017 Product 0x2
    [ 2490.945] (--) evdev: HID 1017:0002: Found keys
    [ 2490.945] (II) evdev: HID 1017:0002: Configuring as keyboard
    [ 2490.945] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1:1.0/0003:1017:0002.0001/input/input2/event0"
    [ 2490.945] (II) XINPUT: Adding extended input device "HID 1017:0002" (type: KEYBOARD, id 8)
    [ 2490.945] (**) Option "xkb_rules" "evdev"
    [ 2490.945] (**) Option "xkb_model" "pc104"
    [ 2490.945] (**) Option "xkb_layout" "us"
    [ 2490.945] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 2490.945] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/event1)
    [ 2490.945] (**) HID 1017:0002: Applying InputClass "evdev pointer catchall"
    [ 2490.945] (**) HID 1017:0002: Applying InputClass "evdev keyboard catchall"
    [ 2490.945] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
    [ 2490.946] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
    [ 2490.946] (II) Using input driver 'evdev' for 'HID 1017:0002'
    [ 2490.946] (**) HID 1017:0002: always reports core events
    [ 2490.946] (**) evdev: HID 1017:0002: Device: "/dev/input/event1"
    [ 2490.946] (--) evdev: HID 1017:0002: Vendor 0x1017 Product 0x2
    [ 2490.946] (--) evdev: HID 1017:0002: Found 9 mouse buttons
    [ 2490.946] (--) evdev: HID 1017:0002: Found scroll wheel(s)
    [ 2490.946] (--) evdev: HID 1017:0002: Found relative axes
    [ 2490.946] (--) evdev: HID 1017:0002: Found x and y relative axes
    [ 2490.946] (--) evdev: HID 1017:0002: Found absolute axes
    [ 2490.946] (II) evdev: HID 1017:0002: Forcing absolute x/y axes to exist.
    [ 2490.946] (--) evdev: HID 1017:0002: Found keys
    [ 2490.946] (II) evdev: HID 1017:0002: Configuring as mouse
    [ 2490.946] (II) evdev: HID 1017:0002: Configuring as keyboard
    [ 2490.946] (II) evdev: HID 1017:0002: Adding scrollwheel support
    [ 2490.946] (**) evdev: HID 1017:0002: YAxisMapping: buttons 4 and 5
    [ 2490.946] (**) evdev: HID 1017:0002: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2490.946] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.1/0000:06:00.0/usb2/2-1/2-1:1.1/0003:1017:0002.0002/input/input3/event1"
    [ 2490.946] (II) XINPUT: Adding extended input device "HID 1017:0002" (type: KEYBOARD, id 9)
    [ 2490.946] (**) Option "xkb_rules" "evdev"
    [ 2490.946] (**) Option "xkb_model" "pc104"
    [ 2490.946] (**) Option "xkb_layout" "us"
    [ 2490.946] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 2490.946] (II) evdev: HID 1017:0002: initialized for relative axes.
    [ 2490.946] (WW) evdev: HID 1017:0002: ignoring absolute axes.
    [ 2490.946] (**) HID 1017:0002: (accel) keeping acceleration scheme 1
    [ 2490.946] (**) HID 1017:0002: (accel) acceleration profile 0
    [ 2490.946] (**) HID 1017:0002: (accel) acceleration factor: 2.000
    [ 2490.946] (**) HID 1017:0002: (accel) acceleration threshold: 4
    [ 2490.946] (II) config/udev: Adding input device HID 1017:0002 (/dev/input/mouse0)
    [ 2490.946] (**) HID 1017:0002: Applying InputClass "Keyboard Defaults"
    [ 2490.946] (II) No input driver specified, ignoring this device.
    [ 2490.947] (II) This device may have been added with another device file.
    [ 2490.947] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/event2)
    [ 2490.947] (**) Logitech G9x Laser Mouse: Applying InputClass "evdev pointer catchall"
    [ 2490.947] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 34 paused 0
    [ 2490.947] (II) Using input driver 'evdev' for 'Logitech G9x Laser Mouse'
    [ 2490.947] (**) Logitech G9x Laser Mouse: always reports core events
    [ 2490.947] (**) evdev: Logitech G9x Laser Mouse: Device: "/dev/input/event2"
    [ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Vendor 0x46d Product 0xc066
    [ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found 20 mouse buttons
    [ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found scroll wheel(s)
    [ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found relative axes
    [ 2490.947] (--) evdev: Logitech G9x Laser Mouse: Found x and y relative axes
    [ 2490.947] (II) evdev: Logitech G9x Laser Mouse: Configuring as mouse
    [ 2490.947] (II) evdev: Logitech G9x Laser Mouse: Adding scrollwheel support
    [ 2490.947] (**) evdev: Logitech G9x Laser Mouse: YAxisMapping: buttons 4 and 5
    [ 2490.947] (**) evdev: Logitech G9x Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2490.947] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.3/5-1.3:1.0/0003:046D:C066.0003/input/input4/event2"
    [ 2490.947] (II) XINPUT: Adding extended input device "Logitech G9x Laser Mouse" (type: MOUSE, id 10)
    [ 2490.947] (II) evdev: Logitech G9x Laser Mouse: initialized for relative axes.
    [ 2490.948] (**) Logitech G9x Laser Mouse: (accel) keeping acceleration scheme 1
    [ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration profile 0
    [ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration factor: 2.000
    [ 2490.948] (**) Logitech G9x Laser Mouse: (accel) acceleration threshold: 4
    [ 2490.948] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/mouse1)
    [ 2490.948] (II) No input driver specified, ignoring this device.
    [ 2490.948] (II) This device may have been added with another device file.
    [ 2490.948] (II) config/udev: Adding input device Logitech G9x Laser Mouse (/dev/input/event3)
    [ 2490.948] (**) Logitech G9x Laser Mouse: Applying InputClass "evdev keyboard catchall"
    [ 2490.948] (**) Logitech G9x Laser Mouse: Applying InputClass "Keyboard Defaults"
    [ 2490.949] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 35 paused 0
    [ 2490.949] (II) Using input driver 'evdev' for 'Logitech G9x Laser Mouse'
    [ 2490.949] (**) Logitech G9x Laser Mouse: always reports core events
    [ 2490.949] (**) evdev: Logitech G9x Laser Mouse: Device: "/dev/input/event3"
    [ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Vendor 0x46d Product 0xc066
    [ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found 1 mouse buttons
    [ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found scroll wheel(s)
    [ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found relative axes
    [ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Forcing relative x/y axes to exist.
    [ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found absolute axes
    [ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Forcing absolute x/y axes to exist.
    [ 2490.949] (--) evdev: Logitech G9x Laser Mouse: Found keys
    [ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Configuring as mouse
    [ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Configuring as keyboard
    [ 2490.949] (II) evdev: Logitech G9x Laser Mouse: Adding scrollwheel support
    [ 2490.949] (**) evdev: Logitech G9x Laser Mouse: YAxisMapping: buttons 4 and 5
    [ 2490.949] (**) evdev: Logitech G9x Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2490.949] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.3/5-1.3:1.1/0003:046D:C066.0004/input/input5/event3"
    [ 2490.949] (II) XINPUT: Adding extended input device "Logitech G9x Laser Mouse" (type: KEYBOARD, id 11)
    [ 2490.949] (**) Option "xkb_rules" "evdev"
    [ 2490.949] (**) Option "xkb_model" "pc104"
    [ 2490.949] (**) Option "xkb_layout" "us"
    [ 2490.949] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 2490.949] (II) evdev: Logitech G9x Laser Mouse: initialized for relative axes.
    [ 2490.949] (WW) evdev: Logitech G9x Laser Mouse: ignoring absolute axes.
    [ 2490.949] (**) Logitech G9x Laser Mouse: (accel) keeping acceleration scheme 1
    [ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration profile 0
    [ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration factor: 2.000
    [ 2490.949] (**) Logitech G9x Laser Mouse: (accel) acceleration threshold: 4
    [ 2490.949] (II) config/udev: Adding input device USB Keyboard (/dev/input/event4)
    [ 2490.949] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2490.949] (**) USB Keyboard: Applying InputClass "Keyboard Defaults"
    [ 2490.950] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 36 paused 0
    [ 2490.950] (II) Using input driver 'evdev' for 'USB Keyboard'
    [ 2490.950] (**) USB Keyboard: always reports core events
    [ 2490.950] (**) evdev: USB Keyboard: Device: "/dev/input/event4"
    [ 2490.950] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x274
    [ 2490.950] (--) evdev: USB Keyboard: Found keys
    [ 2490.950] (II) evdev: USB Keyboard: Configuring as keyboard
    [ 2490.950] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.4/5-1.4:1.0/0003:04D9:0274.0005/input/input6/event4"
    [ 2490.950] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 12)
    [ 2490.950] (**) Option "xkb_rules" "evdev"
    [ 2490.950] (**) Option "xkb_model" "pc104"
    [ 2490.950] (**) Option "xkb_layout" "us"
    [ 2490.950] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 2490.951] (II) config/udev: Adding input device USB Keyboard (/dev/input/event5)
    [ 2490.951] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2490.951] (**) USB Keyboard: Applying InputClass "Keyboard Defaults"
    [ 2490.951] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 37 paused 0
    [ 2490.951] (II) Using input driver 'evdev' for 'USB Keyboard'
    [ 2490.951] (**) USB Keyboard: always reports core events
    [ 2490.951] (**) evdev: USB Keyboard: Device: "/dev/input/event5"
    [ 2490.951] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x274
    [ 2490.951] (--) evdev: USB Keyboard: Found 1 mouse buttons
    [ 2490.951] (--) evdev: USB Keyboard: Found scroll wheel(s)
    [ 2490.951] (--) evdev: USB Keyboard: Found relative axes
    [ 2490.951] (II) evdev: USB Keyboard: Forcing relative x/y axes to exist.
    [ 2490.951] (--) evdev: USB Keyboard: Found absolute axes
    [ 2490.951] (II) evdev: USB Keyboard: Forcing absolute x/y axes to exist.
    [ 2490.951] (--) evdev: USB Keyboard: Found keys
    [ 2490.951] (II) evdev: USB Keyboard: Configuring as mouse
    [ 2490.951] (II) evdev: USB Keyboard: Configuring as keyboard
    [ 2490.951] (II) evdev: USB Keyboard: Adding scrollwheel support
    [ 2490.951] (**) evdev: USB Keyboard: YAxisMapping: buttons 4 and 5
    [ 2490.951] (**) evdev: USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2490.951] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:07:00.0/usb5/5-1/5-1.4/5-1.4:1.1/0003:04D9:0274.0006/input/input7/event5"
    [ 2490.951] (II) XINPUT: Adding extended input device "USB Keyboard" (type: KEYBOARD, id 13)
    [ 2490.951] (**) Option "xkb_rules" "evdev"
    [ 2490.951] (**) Option "xkb_model" "pc104"
    [ 2490.951] (**) Option "xkb_layout" "us"
    [ 2490.951] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 2490.952] (II) evdev: USB Keyboard: initialized for relative axes.
    [ 2490.952] (WW) evdev: USB Keyboard: ignoring absolute axes.
    [ 2490.952] (**) USB Keyboard: (accel) keeping acceleration scheme 1
    [ 2490.952] (**) USB Keyboard: (accel) acceleration profile 0
    [ 2490.952] (**) USB Keyboard: (accel) acceleration factor: 2.000
    [ 2490.952] (**) USB Keyboard: (accel) acceleration threshold: 4
    [ 2490.952] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event9)
    [ 2490.952] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2490.952] (**) Eee PC WMI hotkeys: Applying InputClass "Keyboard Defaults"
    [ 2490.952] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 38 paused 0
    [ 2490.952] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
    [ 2490.952] (**) Eee PC WMI hotkeys: always reports core events
    [ 2490.952] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event9"
    [ 2490.953] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
    [ 2490.953] (--) evdev: Eee PC WMI hotkeys: Found keys
    [ 2490.953] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
    [ 2490.953] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input12/event9"
    [ 2490.953] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
    [ 2490.953] (**) Option "xkb_rules" "evdev"
    [ 2490.953] (**) Option "xkb_model" "pc104"
    [ 2490.953] (**) Option "xkb_layout" "us"
    [ 2490.953] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 2490.953] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 2490.953] (II) No input driver specified, ignoring this device.
    [ 2490.953] (II) This device may have been added with another device file.
    [ 2491.022] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2491.022] (**) NVIDIA(0): device Samsung SyncMaster (DFP-3) (Using EDID frequencies
    [ 2491.022] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 2491.034] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 2491.034] (**) NVIDIA(0): device Samsung SMS27A850T (DFP-0) (Using EDID frequencies
    [ 2491.034] (**) NVIDIA(0): has been enabled on all display devices.)
    [ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
    [ 2491.034] (WW) NVIDIA(GPU-0): mode "1920x1080" is specified in the EDID; however, the
    [ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1920x1080".
    [ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
    [ 2491.034] (WW) NVIDIA(GPU-0): mode "1280x720" is specified in the EDID; however, the
    [ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "1280x720".
    [ 2491.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMS27A850T (DFP-0) contradicts itself:
    [ 2491.034] (WW) NVIDIA(GPU-0): mode "720x576" is specified in the EDID; however, the
    [ 2491.034] (WW) NVIDIA(GPU-0): EDID's valid VertRefresh range (56.000-75.000 Hz) would
    [ 2491.034] (WW) NVIDIA(GPU-0): exclude this mode's VertRefresh (50.0 Hz); ignoring
    [ 2491.034] (WW) NVIDIA(GPU-0): VertRefresh check for mode "720x576".
    Last edited by H3g3m0n (2015-04-01 00:11:52)

    WonderWoofy wrote:I'm not sure about your VT issue, but if you set the 'terminate:ctrl_alt_bksp' option with setxkbmap or loginctl, does it work then?
    I tried setxkbmap before without success.
    Also tried:
    localectl set-x11-keymap "us" "" "" "terminate:ctrl_alt_bksp"
    Not sure how to go about using loginctl to do the same thing.
    Last edited by H3g3m0n (2015-04-01 03:25:35)

  • Opensource ATI can't switch video modes with CTRL+ALT+plus/minus

    Hi,
    I've updated my system to the new xorg-server and video driver.
    The new video driver (xf86-video-ati-6.7.195-1) can't switch video modes with the CTRL+ALT+plus/minus key combination. I use this key combination a lot and before I upgraded to the new driver this worked :-(
    Anybody else having this problem?
    I know I can use xrandr to change the video mode, but it doesn't exactly do what I want. Xrandr changes the video mode, but also changes the resolution of the screen, while CTRL+ALT+plus/minus keeps the resolution intact (the screensize is bigger than what is seen on the monitor, you can scroll the screen by moving the mouse "out" of the monitor)
    Is there a fix/patch that I can try?

    It looks like this is the result of the new opensource ati drivers use the new xrandr.
    One of the changes is that it will treat the screen section in xorg.conf differently. Browsing through video modes, using the CTRL+ALT+plus/minus key combination, that are defined in the screen section in xorg.conf is not possible anymore.

  • Can't switch virtual consoles with Ctrl-Alt-Fn [SOLVED]

    Pretty much exactly what is says in the title. I recently reformatted this machine, and everything seems to be working relatively okay, but for some reason Ctr-Alt-Fn simply doesn't do anything. I can't access my other virtual consoles, it's rather frustrating, and I have no idea how to proceed.
    Any help would be much appreciated.
    Last edited by alex404 (2012-08-17 10:07:40)

    Okay, I didn't realize that chvt is the program that I want to run, so that's super helpful.
    When I first tried to run that I got some error about not being able to read in file, and so I ran it as root and it worked fine.
    So I added myself to the tty group, and now I get this error: chvt: VT_ACTIVATE: Operation not permitted
    Interestingly, I only get this when I run it from a terminal emulator in X11. When I run it while still in the console just after boot, chvt works fine. Now I'm rather stuck again...

  • PulseAudio stops sounding when I switch to other display (Ctrl+Alt+F1)

    Hello.
    When I am playing any sound and I switch to a display (Ctrl+Alt+F1, Ctrl+Alt+F2...) where I have not loged in or a am not loged with my default user account, the sound stops, and when I switch back, I continues sounding.
    Anyone have an idea of what could be causing this?
    Thanks.

    Thanks for the reply.
    Is there a way to change that behavior?
    Edit: After killing console-kit-daemon, sound works on all displays, but I think that it is not the best solution.
    Last edited by eduardosm (2011-12-02 21:29:57)

  • When I close firefox with ctrl-alt-delete, I want to start over on Firefox, I usually do this when too many tabs and windows are open. However, Firefox always restores the tabs and windows I previously had. How can I stop that from happening?

    This happens when FireFox is not responding, and I want to close firefox with ctrl-alt-delete. Too many tabs can make Firefox crash. That is why I want to use ctrl-alt-delete to close FireFox. I tried finding a way to disable this, but I found no option to.

    Ending the Firefox program or process with the Windows Task Manager "looks like" a crash. The proper way to exit Firefox is click Firefox button > Exit (or File > Exit, if using the Menu Bar).
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Kill Session with Ctrl+Alt+backspace+backspace, doens't kill but disconnect

    I've got 4 Oracle Solaris servers with SRS 5.1.2 installed. The servers are configured in failover configured in SRS. When I try to kill (terminate) a session with Ctrl+Alt+backspace+backspace the session will not be terminate. Instead of killing it will be in the state of disconnected on the Sun Ray Administration. I can only terminate the session if I'm on the Sun Ray Administration by selecting the session and click terminate. Does anybody has the same issue, if the sun ray servers are configured as failover?

    A simple google for "terminate:ctrl_alt_bksp" yields https://bbs.archlinux.org/viewtopic.php?pid=602885 as the first hit.
    You could also use an xorg configuration file as is mentioned in the link you posted (a bit higher than the part you linked) and there is an entry for "XkbOptions".

  • Revolve 810 and behavior of the arrow keys with Ctrl + Alt

    The behavior the left and right arrow key, in combination with Ctrl and Alt, is to modify the screen orientation. (Which can be help because the Revolve is easily confused.) However, I want to disable this behavior because I use those key combinations for other uses.
    How can I disable this behavior?

    I understand you want to disable the rotate shortcut keys.  
    It looks like it is using Intel, so I will provide the steps my Windows 7 system uses to disable these functions.  They should be similar to Windows 8 as well.  
    Right-click the desktop and select screen resolution.
    Select advanced settings.
    Select Intel Graphics Media Accelerator Driver for Mobile (wording may be different).  
    Click the Graphics Properties button.
    Select Options and Support of the graphics control panel.
    Disable Hot Key functionality and click apply then ok.  
    This should disable the hotkeys to rotate the screen.  
    Since the Revolve 810 is using an Intel graphics card similar to mine, the steps should be the same or similar.
    Let me know what happens.  
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Cannot switch to tty (terminal, console) with ctrl - alt - F#

    Hi,
    I have been stably using arch for half a year,
    but never managed to switch to another tty.
    I have three suspicions: one is that xmodmap somehow
    interferes, as I switched capslock and ctrl, and also
    alt and winkey (but that is not an issue on a fedora
    install). second, that me switching into runlevel 5
    in /etc/inittab somehow is responsible. and third, that
    it has something to do with awesome, my window manager.
    any ideas are greatly appreciated, thanks!
    > uname -r
    2.6.31-ARCH
    > awesome --version
    awesome v3.3.4 (Mercury)
    • Build: Sep  9 2009 18:32:37 for x86_64 by gcc version 4.4.1 (nobody@Miranda)
    • D-Bus support: ✔

    Hi all and thanks for the comments,
    much to my surprise it was the easiest one - xmodmap causes it,
    although on fedora, there is no trouble with the identical setup,
    thats why i hadn't checked earlier.
    after xmodmapping, alt, ctrl, and F# keys all work independently,
    but not together.
    So here goes my .Xmodmap (the 166/167 lines are for the
    buttons lenovo introduced around the arrow keys and don't
    always work as intended, so disregard).
    remove Lock = Caps_Lock
    remove Control = Control_L
    add Lock = Control_L
    add Control = Caps_Lock
    keycode 166 = Prior Home Home Home Home Home Home Home
    keycode 167 = Next End End End End End End End
    remove mod1 = Alt_L
    remove mod4 = Super_L
    add mod1 = Super_L
    add mod4 = Alt_L
    Any ideas how to go on from here? Because often a
    tty comes in quite handy....

  • Cannot access RR2314 bios with ctrl H

    When I boot into vista 64 via bootcamp, the RR 2314 bios scan screen is displayed with the message to use ctrl H to access it. I cannot get this to work. The ctrl H is just ignored and vista boots. Any suggestions would be appreciated.
    Gary

    HI WHO do we contact for solution is it  " someotherguy" I've typing in the search for " someotherguy" no hits
    I'm having same issues can not access bios using F1 have to disconnect bios backup battery unit as been ok since Aug 2013 the other problem when unit goes into sleep will not wake up you can hear DVD spinning but no display for this I have to disconnect from AC and remove Battery
    I have windows 8 on my unit was win7 but used upgrade disk to 8
    I've tried to update bios from 2.08 to 2,15 as was from the search for solutions on lenovo community suggest this will fix the problem.
    This will not take have tried windows Bios update tool and CD ROM boot disc up bios utility for this to work I had to disconnect hard drive so this was not in the boot option.
    Each time its say will update bios at next next boot up this does not work.
    This is something to do windows boot up manager I think.
    anyone can help would be great before I send this back to service !

  • Cannot compile source file with Ctrl-F7 in VS 2008

    I have added an existing .cpp file to my project.  When I want to compile
    only one file, I usually press Ctrl-F7, but that does not work on this file (it works on some other source files).  When I pull down the Build menu, the Compile option is missing, like it is when a header
    (*.h) file is active.
    When I right-click on the source file in the Solution Explorer, the context menu shows "Compile\tCtrl+F7"; I can compile a single source file that way, but Ctrl-F7 is so much easier and faster.
    I have tried resetting the keyboard shortcut, resetting the profile to the original C/C++ profile, and closing and reopening Visual Studio, but nothing corrected the issue.
    It feels like VS is not recognizing that my source file is a C++ file, despite its name (something.cpp).  Why has this started happening, and how can I get the shortcut (and Build menu) to reset?

    This happens in the following way.  You manually create a new C++ class in an existing project using the editor in VC++.  You then (with the editor still open) add the file to your project.  Visual Studio finds your class info
    and adds it intellisense, making it seem as though VC++ knows your file is in the project.  However, it does not and ctrl f7 will therefore not work.  Removing and adding the file does not help...unless you close the editor window...in which
    case VC++ will correctly add the file if you remove and add it to your project.
    This is not an uncommon way to create a new class - one does not always use the VC++ create class option.  The manual creation method may be preferable if you are not using automated features from VC++ and instead want to copy some code
    from another file, headers for example.   My view is that this is a VC++ bug that should be repaired; apparently VC++ thinks the file is already included if it is open in the editor rather than checking its file list.  But it is easy
    to work around once you know what is happening.

  • Cannot disable zoom associated with Ctrl+Scroll Up/Down

    No matter what I try, my Mac always zooms the screen in/out when I use Ctrl+Scroll Up/Down on my mouse.
    Universal Access states that Zoom is turned off yet the machine continues to zoom. I've tried toggling the Universal Access zoom on/off but it does not seem to have any impact. My Ctrl+Scroll Up/Down always zooms.
    How do I disable this once and for all?

    -->Sys Preferences-->Trackpad  uncheck    ☑screen zoom (or set options that work for you.)

  • Yet another black screen on TTY with nvidia drivers

    Hi everyone,
    I've just changed my hardware and immediately installed a fresh Arch on it. Everything was fine until I installed the nvidia drivers: from that moment, once the boot is complete I get a normal (and working) GDM login screen, but I cannot switch to TTY with Ctrl+Alt+Fn. If I do, the screen goes black, but even worse, the monitor goes into sleep mode and I cannot get back to X (with Ctrl+Alt+F1).
    The machine is still working correctly though, as I can get access to it via SSH. The only problem is that I cannot use the virtual consoles unless I want to lose all X display until the next reboot (restarting it via systemctl restart gdm doesn't work).
    I also tried lightdm as a replacement but it's still the same.
    However, when using the nouveau driver, everything works as expected and I can switch from one TTY to another as much as I want. Of course, I'd like to keep the nvidia driver for various reasons.
    I found a lot of similar issues on the web and on this forum but none had this "additional little annoying thing" which is the sleep mode that can't be reverted but with a reboot.
    Any help will be appreciated. Thanks in advance.
    My specs:
    - MSI GeForce GTX760
    - Intel i7-4771
    - Gigabyte Z87-D3HP
    - Boot UEFI
    Last edited by nanawel (2014-03-24 14:54:03)

    I found that at https://help.ubuntu.com/community/UEFI
    Set up the BIOS in EFI or Legacy mode
    Some recent computers (>2011) allow to set up the boot either in UEFI mode or in Legacy (not-EFI) mode. The way to carry out this setting depends on the computers, but generally this setting is located in the "Boot order" tab of the BIOS (to access the BIOS screens, it is generally necessary to press a key during the PC startup).
    Note: Some BIOSes (e.g. American Megatrends' "Aptio", found on the Asus vivobook series) call Legacy mode "Compatibility Support Module" or simply "CSM".
    So if that applies to your machine, you might be able to boot Windows7 with UEFI mode and Arch+Nvidia with Legacy BIOS mode, without changing anything to the installation (the BIOS boot loader seems to be compatible wih GPT partition table, but there is to configure something for it to work see https://wiki.archlinux.org/index.php/GPT#BIOS_systems).
    If you can't do that and you really do not want to use the nouveau driver, you have no other choice than to wait for Nvidia to release an UEFI compatible driver, and not to work in tty console mode.
    You can also try to search how some has succeeded to use the efifb frame buffer with the nvidia driver, with special configurations.
    But, apart from the BIOS switch between boot loaders,  the two easiest approaches for you are either to use the nouveau driver or to not work in tty console mode when using the nvidia driver.
    Maybe you could find something better but it will be more complicated, I don't know if you have time and motivation to go this way...
    Nvidia will surely release a UEFI compatible driver sooner or later...
    Regards.
    Last edited by berbae (2014-03-26 14:42:01)

  • [RESOLVED] Can't switch between TTYs when GDM is running.

    Hello, I have a strange problem because I can't think of why it would happen...
    If I boot up without GDM starting (ie: runlevel 3), I can switch between TTYs with Ctrl+Alt+Fx perfectly well, however if I then start GDM (or boot into runlevel 5 so it starts automatically), I no longer have this ability. Any idea why?
    Last edited by Barrucadu (2008-04-24 14:37:07)

    I think this has nothing to do with gdm, it's a problem with X. Last time I had this it was because X didn't properly interpret my keyboard settings - so try to comment out any specific Xkb* stuff in /etc/X11/xorg.conf and try to restart X.
    On the other hand, it might be something else - then I don't know.

Maybe you are looking for