Cannot synch audio in PowerPoint

Attempting to import PPT to Captivate 4, is smooth. However,
several slides contain step-by-step animations with "on-click"
progression. I cannot find a way to insert audio between the
clicks. Have tried some creativity with various click-box
additions, pausing timeline or not manipulations, but, not gettting
anywhere. I'm thinking I might be able to insert text boxes
instead, that just come in and out with each click as the slide
animations advance. Audio is preferable - any ideas or
suggestions?

Ok, I've tried the transparent captions with audio attached
to them. The problem with this method is the slide animation is
still "in charge" of the timeline. It is "on-click" animation, with
progressive steps that move to the next step on the slide with a
mouse-click. The slide begins executing the first animation with a
mouse-click, the timeline stops and waits for the next click, and
so on, as each successive animation is complete.
So, I tried adding my own click boxes, with pauses and
without, (to see if they might somehow be able to usurp the click,
or at least coincide, perhaps to "fool" the PPT slide into
following a different timeline). No joy. I think it just needs to
be reworked as a recording or the slides animation pre-timed prior
to import.
Any other ideas?

Similar Messages

  • I cannot synch 24fps video footage with an audio .wav file. Is there a speed conversion factor?

    I inadvertantly shot a video interview with a new camera (Panasonic HVX 200) set at 24fps. Because of that, the camera wasn't getting an audio signal from the microphone so in a panic, I hauled out my trusty old Zoom H4Nex digital audio recorder and captured it that way. Now I cannot synch up the audio and video in FCP CC (MAC OSX 10.9.2). Clearly, the audio file is about 25% longer than the video file, however, I cannot find the exact factor to change the audio speed to create lip synch. It always ends up a little short or a little long. If you will point out the error of my ways - I will promise to never do THIS again!

    Thanks, Steven. But that's not it. Here's some new information:  The camera
    I was using (Panasonic HVX 200) had the frame rate set to 720 30pn.
    However, the "scene file" mistakenly applied listed 24fps. Premiere Pro
    thinks this footage is 29.97. Is it possible that it's actually 24fps and
    that's why it's about 25% shorter than the corresponding .wav file? If so,
    is there a way to "fool" Premiere Pro into slowing down the footage?
    Unless I'm off the mark completely. It's been known to happen.......

  • Synching Audio and MIDI Error Message

    I have two Motu 896hd audio interfaces and I cannot get them to work with Logic I get an error (error synching audio & midi) message every time I try to use them. They worked fine and then stopped. I have tried using each one by itself and nothing seems to work is there a way to reset the Motu? Logic works fine when I have just the built in core audio set up but not when I use the interface.

    look down the list about 35 posts down

  • HT2729 I cannot synch a movie from my iMac to my iPad.  I keep getting a message that I am not connected to the internet.  Yet, I can fetch my email, access many newspappers, and listen to music clips for the itunes store.  I did a retart of all without l

    I cannot synch movies to my iPad.  This has worked for me in the past.  I keep getting an error message that I am not connected to the internet.  Yet, I certainly am.  How else could I post this message.  I can listen to music clips from the iTunes store, fetch my email, and read current newspapers on the internet.  I restarted both my iMac and my Ipad and that didnot help. 

    I completely understand what is happening. I know that you are connected to the Internet. I made the suggestion because I have seen it work in similar circumstances. The Apple iTunes servers can be a bit fussy about things and sometimes rebooting the router clears up this miscommunication between iTunes and your network.
    Have you tried signing into your account and then try to sync again. Go to Store>View Account. You will have to enter your password. Then try to sync again. Or try signing out completely in Store>Sign out. Quit iTunes, sign in again and then try to sync again.
    Sometimes refreshing settings will help clear up weird problems.

  • Cannot play audio CD with Creative MediaSource Pla

    Hi All,
    I recently installed an Audigy 2 ZS Platinum soundcard and the Creative MediaSource Player software. I also purchased Creative 5. Analog speakers. Have everything configured pretty well now and really enjoying the enhanced sounds!
    My problem is that I cannot play audio CDs using the MediaSource Player. I can see my DVD Player and CD Player in the MediaSource Player 'Source' column and a list of all the tracks on the CD. (no track info, just track numbers and length)
    When I double-click on a track it cycles through all the tracks and then places an 'X' next to each one in the 'Now Playing' list window. If I have other music files from my harddri've available, it will start playing one of them.
    I've tried different CDs with the same results.
    I can use both the DVD and CD dri'ves to play an audio CD if I use any other player (Winamp, Windows Media Player, etc.) and use both dri'ves everyday for loading software and reading files. It will also read the demo DVD Audio disk that came with the card using the DVD-Audio player they provide so I'm pretty sure there's nothing wrong with the hardware or drivers.
    I've read all the info that came with the card and on the Creative Web site and have been through every configuration screen multiple times but haven't found a switch that turns this feature on.
    Would like to get this working so I can standardize on one player that allows me to use all the advanced features of my new card.
    Thanks in advance for any light you can shed on this.
    Jay Perez

    A good way to see what kinds of things you might need for something like vlc is to look at the optional dependencies for the package.  So if you do pacman -Qi vlc if the package is installed on your system already, or pacman -Si vlc if not yet installed, you can see in the output what kinds of optional dependencies there are.  Typically there is a short description of the extra functionality that the optional dependency can provide as well. 
    So in the case of vlc (and the libcdio optional dep) I get:
    $ pacman -Qi vlc
    Name           : vlc
    <SNIP>
    Optional Deps  : avahi: for service discovery using bonjour protocol [installed]
                     <SNIP SOME MORE>
                     projectm: for ProjectM visualisation plugin
                     libcaca: for colored ASCII art video output [installed]
                     libgme: for libgme plugin [installed]
                     librsvg: for SVG plugin [installed]
                     gnome-vfs: for GNOME Virtual File System support
                     libgoom2: for libgoom plugin
                     vcdimager: navigate VCD with libvcdinfo [installed]
                     xosd: for xosd support
                     aalib: for ASCII art plugin [installed]
                     libmtp: for MTP devices support [installed]
                     smbclient: for SMB access plugin [installed]
                     libcdio: for audio CD playback support [installed]
                     ttf-freefont: for subtitle font
                     ttf-dejavu: for subtitle font [installed]
                     opus: for opus support [installed]
                     libssh2: for sftp support [installed]
    <SNIP>
    Last edited by WonderWoofy (2013-08-24 18:45:56)

  • I can get video on airplay anytime but i cannot get audio all the time.  in sound output i select airplay but it only reverts back to internal speakers.  same if i try earbuds.  the only way to fix it is to restart computer.  what do i do to fix it,

    I can get video on airplay anytime but i cannot get audio all the time.  in sound output i select airplay but it only reverts back to internal speakers.  same if i try earbuds.  the only way to fix it is to restart computer.  what do i do to fix it,

    In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
    Switch off Mac
    Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
    Switch off Mac again
    Remove power cord and wait 15 seconds
    Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

  • Cannot play audio from macbook pro 2009 to tv using hdmi with adapter

    MacBook Pro 2009. I cannot get audio from my my macbook pro to tv using an hdmi adapter

    That is because the 2009 MBP does not support audio via the minidisplay port.  You will have to tap the audio output port for audio and use the RCA audio input connections on the TV.
    Ciao.

  • Adobe Presenter 9 and PowerPoint 2013 - Missing Import Audio from PowerPoint button

    I am only able to intermitantly use the Import button in Adobe Presenter 9 to Import Audio from PowerPoint. Why would I be able to do it on some presentations but not all? I thought it was an audio conversion issue but even when I convert the audio (when prompted by PowerPoint) it doesn't always allow me to import it.

    I have found a solution if the original PowerPoint was a ppt file, follow these steps:
    File > Save As a pptx file
    Close PowerPoint (this helps with not corrupting the file)
    Re-open the pptx file
    File > Convert
    Save with a new file name (this helps with not corrupting the file)
    You should now have the Import from Presentation button if you go to the Presenter tab and click the Import button
    I have not found a solution for pptx files yet.

  • Cannot get audio on movies.

    I have two atv units. both are hooked up via hdmi to their respective viewing equipment. I can hear the menu feedback clicks, etc., but cannot get audio on movies. music works fine. tv shows sometimes. Any ideas?

    Try changing the Dolby Digital settings - if set to On and the device doesn't decode dolby digital you don't seem to get audio - at least on my TV.
    AC

  • Cannot synch my purchased itunes video with my ipad?

    I have purchased a tv series in SD format from iTunes and although it is in my iTunes library I cannot synch it with my iPad?What do I need to do?

    Welcome to the Apple community Lynne.
    You can't merge Apple ID's or transfer content from one account to another.
    iTunes and iCloud are separate services and have different logins. You can continue to use your new ID for iCloud (mail, contacts etc) but use your old ID to log into iTunes and therefore still continue to use all the music et al you have purchased.

  • DigiVox A/D - Cannot render audio capture

    Hello, i have DigiVOX A/D. I configured it and I can watch TV. But when I try to capture it, there is a "Cannot render audio capture" message. I tried a lot of parameters changes but nothing helped. Can you please help?
    Juso

    So I did some more testing. Now it works this way:
    I can watch TV and it works OK. When I click capture it doesn't work and it writes error message "Cannot render audio capture". I go to settings and setup to capture only audio. I try to capture. I do some more modifications. It still doesn't work. But on some point of configuration (I could't find exaxtly when) the sound stops during watching. And if I try to capture at that time, it captures OK with audio and video. It doesn't matter whether I use Mpeg 2 or Mpeg 4. Both works. So I think codecs are OK. And it works so (no audio during watching and good audio and video during capture) till I close the application. When I start it again, there is sound when watching and error when clicking capture button. And again I can do some settings modification (random) and after some config steps it start capture but stops audio while watching.

  • Cannot synch photos

    I cannot synch photos in iphoto ('09) with itouch 4G using itunes 10.6.3.  Lion OSX.
    In the device, I go to the photos tab and select the albums to be transfered. Synch photos from iphoto is checked. Selected albums radio button is chosen.
    I get the option to apply and/or synch and by selecting them neither of them will transfer the chosen photos.
    Any suggestions would be sppreciated.
    Steve G.

    DId you remove the iPod Photo Cache:
    http://support.apple.com/kb/ts1314

  • Cannot synch iPhone because it gives me an error message..."iPhone cannot be synched. You do not have enough access priviledges for this operation."

    Cannot synch iPhone4 because it gives me an error message &quot;iPhone cannot be synched. You do not have enough access privileges for the operation&quot; However, both the iPhne and computer are both mine...please help!

    It may be the cache folder with problems, you can check this discussion on the issue to locate folder and try that solution.

  • Cannot synch multiple contact or calendar folders; no way to recognize folders with names other than contact or calendar

    cannot synch multiple contact or calendar folders from computer using outlook. iPhone seems to recognize only single title of contacts or calendar

    iPhone PC Suite may be helpful. It allows you to import contacts from vCard files, Outlook Express, Windows Address Book, Windows Live Mail and Outlook 2003/2007/2010/2013 to iPhone directly.

  • Cannot synch deleted emails no matter what I try

    I cannot synch deleted emails on either of 2 personal accounts, nor the integrated account.  My current company does not have BES.  I have verified all the settings to synch deleted email on both the device and accessing my BB account on on internet.  According to Doc. ID KB13509, I should be able to do this with MSN email and my work email (IMAP).  I have had both the warranty centers at AT&T and AT&T referred to BB service support try to do this, and they all say my settings should be work but still no success.  Between the 2 accounts I receive about 150 - 200 emails a day, so if this doesn't synch with my laptop emails (using outlook 2007) I am sunk. My outlook is synch'd with the mail servers and that works fine.
    Only 2 brute force solutions come to mind, delete all accounts and activate once a week, or try to synchronize from laptop outlook on a daily basis, both of which are really not acceptable since I travel a lot and find this extremely burdensome.  Please help

    Greetings, and welcome to the BlackBerry.com Support Forums.
    This should work to delete your emails from the server, when deleted from the BB.
    Have you checked your settings at your BIS carrier login to "synchronize deleted messages between handheld and server"?
    Are you also trying to sync those deletes to Outlook?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for