Cannot synchronize Aperture Projects to my iPhone

I am trying to synchronize some Aperture projects to my iPhone. I can go into iTunes and see all my projects and I can check the boxes and sync my phone but nothing happens, the photos do not appear on my phone. However, if I put those same photos in an album everything works just fine. Has anyone else had this problem?

Mark,
Syncing projects to the iPhone has been buggy recently. I assume you have tried all the usual remedies:
Check the preference settings for the generation of previews
Switched between Aperture projects
Rebuild the previews for the projects in question
Repaired your Aperture library
Removed the Aperture User preferences, as described in the Aperture Trouble Shooting basics
If none of these helps, this is probably due to a bug: Send feedback to Apple (from Aperture's main menu bar: Aperture > Provide Aperture Feedback) and meanwhile use albums as a work-around.
Regards
Léonie

Similar Messages

Cannot synchronize my Avengers digital copy to my iPhone 5

I bought the Avengers triple combo (Bluray + DVD + digital copy). Was able to download the digital copy to iTunes without a problem. However I cannot synchronize the movie to my iPhone 5. Anyone has any suggestions?

Only "universal" apps, that are designed to work on both an iPad and an iPhone will transfer to your phone. iPad only apps won't transfer because they are not compatible with your phone.
Also, backing up to iCloud doesn't automatically transfer your apps. To transfer you apps you have to either restore to the entire iCloud backup of your iPad, or, simply download them directly to your phone by opening the App store app on your phone, tapping Updates at the bottom, tap Purchased at the top, tapping Not on This iPhone at the top, then tapping the download icons next to the apps. Note: you must be signed into the Apple ID used to purchase the apps in Settings>iTunes & App Stores on your phone in order to see the purchased apps.

Cannot synchronize iphone 5 after updading itunes 12.1.0.71

after updading itunes 12.1.0.71 I cannot synchronize iphone 5 ?

Hi Guys,
Below is the solution which has worked for me. Hope it works for you guys as well.
Steps:
1. Connect your iPhone to Computer thru USB
2. Go to Device Manager.
3. Then check in Imaging Device, Other Devices, Portable Devices, or Universal Serial Bus Controllers and see if you see Apple iPhone.
4. Now right click where it shows Apple iPhone and click on "Update Driver Software"
5. Then Click Browse My Computer for driver Software.
6. Click "Let me pick from a list of device drivers on my computer."
7. Click the Have Disk button
8. In the "Install from Disk" dialog, click the Browse button.
9. Use this window to navigate to the following folder:
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
10. Double-click the "usbaapl" file. It may also say sometimes "usbaapl64"
11. Click OK in the "Install from Disk" dialog.
12. Click Next and finish the driver-installation steps. Open iTunes to verify that the device is recognized properly. Boom !!! It done and worked for me.
Let me know if it worked for you guys.
Cheers !!!!

Aperture cannot export multiple projects for original files

i want to export projects (original files) to time capsule folder for sharing
i can only go into the individual projects, select all, then export to my desire location
but i cannot select multiple projects and do it at once, as i have 100+ projects
it will be a nightmare if i go projects by projects

Tks for the reply , the reason I wrote (original) means I want each project name will be a directory name
That is what the Export settings in my screenshot should give you, if you select the images from several projects at once and export using "File > Export > Originals".
Only you have to select the images inside the projects, not the projects in "Projects" view. Move the projects to a containing folder and select all images in the folder, or select all photos in the "Photos" view.

Can I have two Aperture projects with same name?

Hi. I'm new to Aperture and an advanced iPhoto user. I started using Aperture sharing the same library with iPhoto (that new functionallity).
I've read lots of manuals and tutorials (Apple's and others) as well as this support topics. I understand iPhoto Events are now Aperture Projects and I've read a lot about how should it be organized and so on.
My problem is: I got, for example, 4 iPhoto Events with the name "Friends". The appear in Apperture as 4 Projects named "Friends". I decided to rename one of them and the I came back to "Friends" name. Aperture won't let me: it appends "(1)". It seems I cannot name to Projects the same way, although I have that.
Before: Friends, Friends, Friends, Friends
After renaming one of them and trying to get back to original name: Friends, Friends, Friends, Friends (1)
I have that duplicated name because it is like a title, photos of my friends in different time (one Friends is from 2005, other from 2010, and so on, for example).
It seems pretty bad I have to come up with a new name for each new Project, considering I have hundreds of them today. Any tips? Thanks.

If there is nothing separating the images then put them all in the same project. If you have a project Friends you know all your friends images are in there and you can find the ones you want by date or keyword or even Face.
There is no requirement to have the images from different times at the bar to be in different projects. I personally wouldn't work that way but if having a project called Friends at Bar works for you then place all the images of your friends at the bar in that project.
Of course another way to look at this is to use albums to pull all the images of your Friends at Bars together. Don't have the name of the project organize your library, create albums and/or smart albums to collect the images into meaningful groupings.
regards

Syncing certain Aperture 3 albums with iphone causes inconsistency

Hi!
I'm trying to sync some of my projects/albums in aperture 3 with an iphone 3g with latest firmware and have the following issue: Sometimes iTunes shows that there're only one photo in the album, while there may be some dozens of photos. This happens with random albums and selecting/deselecting this album in iTunes doesn't fix that. I've tried to relaunch all apps, change the number of photos in albums and that doesn't work too. iTunes just tells there're single photo in the album.
Interesting thing is noticed: selecting/deselecting that albums changes the capacity progress bar, but in the AUDIO section. I'm absolutely shure there's no any audio/video files in that project.
Syncing Vega Mod project. Audio capacity is 0,74.
Then selecting Vega Mod project. iTunes shows 1 version (but there're 8) and audio capacity changes to 0,83 o_O ??? Did i miss something?

I've tried to rename the album inside the Aperture, that has changed the behavor of capacity slider (it is not changed in audio section anymore) and gave the different number of items in the albumm (now shows 2 instead of 8).
I also verified that all items inside the album is the same kind/rating/category - all is unrated and just has been imported from iphoto.
Rebuilding and checking Aperture library for consistency didn't give any result.

Cannot 'Synchronize with database' my entity objects

Hello,
I have successfully created entities in my model using the 'new buisness components from tables' function. But now my database moddel has changed and I would like to synchronize my entities with database to get newest colums, but when right clicking an entity, the 'Synchronize with database' link is greyed and cannot be selected.
I have a database connection configured in my application resources and I can still import new tables in my project.
Do you have any idea of what is happening? This is not the case for all my applications. I can still synchronize in some other ones
Thank you for your help
Stephane

Synchronize with the database will be avaialble for the Entity Object
I think there is a problem with the particular entity that got created when you did the business components out of tables..
This is not the case for all my applications. I can still synchronize in some other onesif this is not happening with any other EO in any other application.. then you can try
recreating the EO from the table..
compare what is the change in between the EO that can synchronize and your current EO that cannot synchronize..
another option might be to check the application.. if that is havign some hidden property to synchronize..
last is to go with sameer's approach, to doubt about the table is not proper... in the same applciation create an EO with another table and try to synchronize.. you will get to actually the point where there is a problem..
good luck.

Cannot synchronize my new photos from MBP's iphoto to my iphone4

i did this in the past, but recently i cannot synchronize my new photos from my MBP's iphoto to my iphone 4, please tell me how to do.

What does this mean? You don't know where transferring photos from your computer to your iPhone is selected for your iPhone sync preferences with iTunes?
Or selected iPhoto events and or albums are not transferred to your iPhone?
If the latter, any error message provided?

Aperture Project Re-Import Problem

Aperture Project exported to aux. drive cannot be imported. Getting "Error Importing Library" message; "The library could not be imported because it is from an out of date version of Aperture 3. Please upgrade the library to the latest version of Aperture"
The project is a 2009 project that was exported this year after I upgraded to 3.0, in an effort to create more disk space in my MacBook Pro. I have several years of well over 100 Projects that I've exported "Projects as a New Library" and am now unable to re-import them for added work and access.
Is there a clear cut solution to this? I've done some searching on web and it appears this has been a significant problem for other Apertures users as well.
nikondon

Hello nikondon,
First you need to upgrade your old Library. Select it in the Finder and double-click it. That will launch Aperture with this library and convert it.
(or hold down the Option key while clicking on the Aperture Icon in the Dock. From the list of available libraries choose this particular one).
Then you will be able to import your old library into your current one.
Regards
Léonie

Aperture Projects Sequence Problems on Apple TV

Aperture projects go to bottom of iTunes list when syncing to Apple TV. I'd like my Aperture projects to use the same sequence they do in Aperture. Any ideas?

Aperture creates "Previews" which are used for slideshows and exports.
To adjust the quality of the Preview files:
- Go into Aperture's Preferences
- Find the preview tab
- Adjust "Photo Preview" from Half Size to a size equal to your screen's resolution (e.g. Screen size is 1080x768, 1080x1080 is the appropriate setting)
- Adjust "Photo Preview Quality" to 9 or 10
This improved the quality of the photos I was syncing to my iPhone as well as viewing photos on my LCD via Apple TV.
Source: http://support.apple.com/kb/HT3781

New Apple TV: 1) read all photos from Aperture (projects) 2) assign music

Hi,
i'd like to buy your new AppleTV but would like to know:
1) Is it possible to real all the photos within Aperture Projects ?
With AppleTV 1 gen isn't possible, i need to create first album cause photo in projects aren't shown!
2) i'd like to pre-assign for each slideshow a music (from iTunes): is it possible with 2nd gen Apple TV ?

Yes, I have the same issue also.
It look like only the last import is missing somehow.
For example, yesterday I import photos from DC and iPhone, and put them in one event.
Only the DC part shown up, and iPhone photo are missing.
If I use "Last 12 month" section in Apple TV and jump to bottom, you can see some empty squares, and not viewable. Somehow it is not updated.

Multi-camera - Cannot synchronize camera clips (Clip Sequence disabled)

I'm trying to create a new Multicam sequence with 3 clips of an event shot on 3 different cameras, but cannot synchronize the camera clips in my new sequence. Here's what I did:
First, I loaded one camera clip into the Source window. I located the hand clap near the beginning of the clip, and set Clip Marker #1 at that timecode in the clip. I repeated this for the other 2 camera clips.
Once I had set Marker #1 at the hand clap in each of the 3 clips, I created a new sequence named "Aligned." I added each of these 3 clips to this sequence. Then I selected all 6 clips (3 Video, 3 Audio) in this sequence, and dropped down the Clip menu to choose Synchronize. Unfortunately, Synchronize was disabled (greyed out) in the Clip dropdown menu.
I loaded each of the camera clips into the Source window and confirmed that they all have Marker #1 at the correct timecode position (the hand clap).
I'm new to PPro, so I tried to follow the instructions in the PPro online help page, Multi-camera sequences. What would cause Clip > Synchronize to be disabled, and how do I get past this?
Thanks,
BIllRab

I agree with Jim. I've done a lot of multicam projects and I've never used a Clip > Synchronize command. It should be a breeze to align the three camera angles on the timeline. If your magnetic toggle is activated the Markers will actually snap into alignment as you are adjusting their position on the timeline.
Or you could just set the in point of each clip at the clap marker, or any arbitrary equal distance from the clap marker, then overlay each of the clips on seperate tracks at the beggining of the sequence.
As long as each camera angle has a clear synching point and continuous video you should be golden.

I by mistake downloaded aperture albums to my iPhone. Cant seem to erase the files on my phone now. Any ideas on how to do this

I by mistake downloaded some aperture albums to my Iphone. I can remove any file except by the ones downloaded by aperture. Any ideas on how to remove these albums.

Photos in albums synced to the iPhone cannot be deleted directly on the device. You remove them from the sysnc-source and by syncing again: During the next sync
disable the albums from being synced; then they will be removed from the iPhone
or remove the images that you do not want on the iPhone from then albums before syncing.
Regards
Léonie

Apple Watch cannot synchronize contacts

Hi all,
My Apple Watch cannot synchronize all of my contacts - my favorite contacts are always empty after 4 days.
I have two iCloud accounts (one for my myself, one for family) for contact and the iPhone contact.
I found that it can only synchronize one of the iCloud accounts and the iPhone (itself) contacts; which it left my another iCloud accounts (onwith over 1500 contacts.
Is this a limitation of Apple Watch to synchronize only one iCloud accounts - can I force it to synchronize my another iCloud accounts?
Thanks.
Vincent

I am bloody livid. My synchronisation from N95 8GB to Outlook stopped working a few months back. I tried reinstalling the software but it warned me that there was a problem with the installation so I tried to close the modal window. A dialogue box came up saying it could not exit without damaging the phone so I let it complete and there was no marked difference - and the phone still would not sync.
I have been unable to synchronise/backup since then so, this morning I got an update software notice and assumed that would be a good move. The download started followed by the installation. The installation halted half way through telling me I was disconnected from the phone. I read the warning that says 'Do Not Disconnect' So I went out without my phone leaving it to do what it would do. On my return I found a Dialoge box telling me there was a problem with the installation.
My phone had cleared completely. Completely reset. No Calander, No Contacts, No Notes - all gone! And now? I still cannot synchronise with Outlook. I have a phone with no contacts and no means of getting them on other than manually
The problems this will cause me are immense. I suppose there is little anyone will do about this but I was delighted with the phone until this occurred. I am now trawling the net to see if comparitive competitors phones have synch problems because it would appear from this and similar threads that I am not alone with this problem.
I should have calmed down by now but I haven't. I am bloody angry.

HT1296 I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

I already have an itunes account on my laptop but have been setup on a mac and have songs that have not been purchased from the itunes store, I cannot get the songs from my iPhone onto my itunes account on the mac. how can I do this?

You copy them from your old computer or your backup copy of your old computer.
The iphone is not a backup/storage device.

Cannot synchronize Aperture Projects to my iPhone

Similar Messages

Maybe you are looking for