Cannot synchronize passwords from DS with ISW

I have this warning S Plugin (SUBC100): cannot capture password change of 'uid=rrrr,ou=people,o=tdc', because new password is already hashed" TNK

[25/Jun/2009:12:32:31.800 +0200] WARNING 2301 CNN100 tiwspreldap1 "DS Plugin (SUBC100): cannot capture password change of 'uid=aapontec,ou=empleados,ou=personas,o=tdc', because new password is already hashed"
i make the next syncronization for the first time : from DS to AD
./idsync resync -c -o Sun -l SUL2 -w - -q -
thank you!
yenny.
Edited by: yenny on Jun 25, 2009 3:36 AM

Similar Messages

Remove password from PDF with Reader 9.0?

Hi,
We would like to know if a user opens a protected PDF (with 128/256 bits encryption) in Acrobat Reader 9.0,
can the user save a copy of the protected PDF and the new PDF is no longer password protected.
That means I would like to check if the reader 9.0 can allow user to remove the password (Of course, permission
should be granted when creating the protected PDF in Acrobat 9.0) from the protected PDF file.
Thanks for your attention in advance,
Raymond

Reader cannot remove password protection. It only reads files.

Local Users (belongs to domain) on ISE cannot derive Password from Windows Database

Dear Support Team
We are in the progress of Migrating ACS4.2 to ISE3355 running 1.1.4. We have SSL VPN Users & Wireless Users to be migrated.
ISE 1.1.4 is already integrated with AD Windows 2008 and can see all the groups defined on AD.
1: in ACS 4.x & even 5.x, we have option to add a user locally (users belonging to domain) , and we can configure user’s password to be derived from Windows Database. It helps to control AAA Policies.
It also helps to avoid configuring "users" in specific groups on AD and as a result no dependency on System Team to configure users in specific groups, which can be used in policy making on ISE.
However while doing the same, I could not find an option in ISE 1.1.4. Password cannot be derived from windows database. Password has to be set manually, that clearly means that i have to arrange the users in specific group on AD.
Is it a platform specific issue or am I missing something ?
Thanks in advance for your valuable time to look into this issue.
Ahad....

It seems that i have to open a TAC case to get cisco official explanation on this feature, it was a nice feature, which has been unnecessarily deprecated.
Any Inputs from anyone, who has similiar requirement, Please share it here.
Regards
Ahad

Cannot change password from OS X

I just tried to change my Skype password from my Mac running OS X 10.6.8. I tried in both Safari and Chrome, but once I put my old password in, I could not tab into the next field not select it with my mouse. I finally got my password changed by logging in from my iPad. That's funny, as it's usually the other way around. Some sites that work fine in a desktop OS don't work right in Mobile Safari.

Try booting from your 10.1 DVD and going to Utilities/Reset Password.
User Password Reset (3)

Cannot print coupons from SmartSource with FireFox 3.6.14

I was just upgraded to Firefox 3.6.14 and suddenly I cannot print coupons from SmartSource. I keep getting the message that Java is disabled but it is not. I uninstalled Java and reinstalled it and still get the problem. I can successfully print from Internet Explorer.
I've never had a problem with this until the 3.6.14 upgrade. On the Java web site, it said if you're getting an error message and you recently upgraded Firefox, download an update so I did that too. No help. I've restarted Firefox after each change.

There's a Bug in 3.6.14 with Java. A quick patch is being tested for a 3.6.15 release, but no date is set for that release. Probably early next week.

Exchange 2010 user cannot change password from OWA

My users are not able to change their own email password from owa. But we can change the passwords from ECP or from the server without any issue. What could be the issue ?
Biju Rajan

Check the regional date and time is set for user OWA...Follow the below steps
On the Client Access Server (CAS), click Start > Run and type
regedit.exe and click OK.
Navigate to HKLM\SYSTEM\CurrentControlSet\Services\MSExchange OWA.
Right click the MSExchange OWA key and click New >
DWord (32-bit).
The DWORD value name is ChangeExpiredPasswordEnabled and set the value to
1.
Note: The values accepted are 1 (or any non-zero value) for "Enabled" or 0 or blank / not present for "Disabled"
After you configure this DWORD value, you must reset IIS. The recommended method to reset IIS is to use
IISReset /noforce from a command prompt.
Ref:http://blogs.technet.com/b/exchange/archive/2010/10/06/3411240.aspx
Exchange Queries

Cannot send email from iPad2 with Shaw

Hi there,
I have issues that I cannot seem to resolve:
I can receive from my shaw account but it sends all outgoing to the Outbox - I've double, triple cheked all incoming and outgoing servers - I even sat with my iPad next to my iMac to make sure everything matched.
it says The sender address "myemailadrees.com" was rejected by the server. even though I recive ok.
Help please??

I too have spend countless hours trying to get my iPad 2 to work with my Shaw email. I FINALLY got it to work this morning after about 3 months of trying different "solutions". Here is how I set my POP email account:
Incoming mail server:
Host name: shawmail.ed.shawcable.net (I live in Edmonton)
User name: my shaw email address without the @shaw.ca
Password: my Shaw email password
Outgoing mail server:
Host name: shawmail.ed.shawcable.net (I live in Edmonton)
User name: leave blank
Password: leave blank
Use SSL: off
Server port: 25
This has worked so far for me, so hopefully it will work for others as well. It seems like there is an lot of people on these forums going through the same frustrations. I was able to set both mine and my wife's email accounts on my iPad.

Cannot power up from standby with remote

Using the microsoft remote with XP MCE2005 I cannot wake the computer up when in standby mode, are there any settings which I need to adjust?

the way i have it set up is to have only one user with no password set. that way, when windows starts up, it will bypass welcome screen and go to desktop of default user. if you have downloaded the .net framework, you should go into Administrative Tools and in the Users settings, disable the ASP.NET user that has been created
as for your other query i'm not sure what else to suggest - MCE05 could restart fine from standby usng the remote when i had my mega 651 - it doesn't on my current mega-less media center setup (prays for mega 180 to arrive soon) as it won't go to standby manually (??) - but i know the remote can't wake the computer if shut down or in hibernate

Cannot verify password when paying with visa to add funds on national lottery

since upgrading to ff4 I cannot add funds to my national lottery account via bank card, when asked to verify with password etc, it goes back to "sign in"

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/Cookies
* http://kb.mozillazine.org/Websites_report_cookies_are_disabled

Cannot delete email from iPad with no content

Have tried all of the suggestions to get email delete without content. have restored iPad and that still does not work, prevents me from deleting other emails also as it hangs and then jumps me out of email. WHen I move an email to trash it keeps putting these emails with content back into Inbox. extremely frustrating!

Reset of settings worked!
+1 for sharing that.
It seems an issue that has krept up in 8.1.x. I was not looking forward to having to wipe the iPad in any way.
Note: off the top of my head, my "accessibility" settings (even though I have no vision issues, just trying to compensate for apple's design direction) were reduce motion, reduce transparency, reduce white point and bold on.
Was able to delete apps after that settings reset, which took the above out, and rebooted the ipad.
Did have to re-enter wifi password, set wallpaper and the above settings. Haven't tried deleting since, but have left bold off, as it requires a restart.

Cannot synchronize my BlackBerry Z10 with Outlook 2007 on my Windows 7 Computer

Z 10 Sync to Outlook I cannot sync, despite my best efforts, my BlackBerry z10 with my calendar on my Outlook 2007 on my Windows 7 computer. I am not such a blithering **bleep** that I cannot figure out to, and I have already done, the following: 1, make sure I have an updated BlackBerry Link software; 2, Hook up my phone to the computer and select the device; 3, select "Microsoft Outlook" as account type. 4. Select "calendar" The process seems to start out fine, and then I get a "Sync was unsuccessful" message. I am thinking of getting a web- based work around, by synchronizing Outlook with Google Jacaranda maybe, and then synchronizing it that way, but that uses data. I should be able to use default settings and simply use BlackBerry Link software and the cord that comes with my phone.

Maybe you can try this way:
http://helpblog.blackberry.com/2013/02/how-to-setup-outlook-to-wirelessly-synchronize-your-contacts-...

I suddenly cannot synchronize my 80Gb iPod with iTunes. Does anybody have a solution ?

My iPod didn't play a sound
I tried to synchronize it with iTunes on my iMac but the message says " impossible to synchronize", "Unrecognisable"

Hello eddemas,
Thank you for providing the details of the issue you are experiencing with apps purchased from the iTunes Store. I recommend following the steps in this article:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Thank you for using Apple Support Communities.
Best,
Sheila M.

Cannot Remove Password From Accdb Database

Access 2007
Windows 7 Ultimate x64
I created an accdb database and encrypted it with a password. Now I want to remove the password.
I opened the database exclusively and entered the password. The help instructions say:
2.On the Database Tools tab, in the Database Tools group, click Decrypt Database.
The Unset Database Password dialog box appears.
Unfortunate, the Database Tools group is displaying "Encrypt with Password" and clicking on that brings up the Set Database Password dialog box not the Unset Database Password dialog box.
Is this a known bug?
There is also an Encode/Decode Database in the Database Tools group but there does not appear to be anything in the help information about it.
Decode Database results in a not found response and Encode Database retunrs a link to Encrypt a database by using a database password which refers to the "Encrypt with Password" section of the documentation which refers to "Encrypt with Password" in the Databse
Tools group.
The only way it appears you can remove a password is to create a new unprotected database and import everything from the old one it. Unfortunately, that leaves behind things like the layout of the Relationships window, all property settings, etc.

Hi There,
Sorry for the late response.
I think I have a solution to your issue. I poretty much had the same condition when trying to remove a password. I logged on in EXCLUSIVE mode multiple time and each time I would see the ENCRYPT with Password instead of the "DECRYPT...."
I believe my password contained a few special characters that may have caused the problem with corruption because I also noticed that whenever I tried to COMPACT & REPAIR it would not accept my password that I logged on with. That's why I
figured there is either a bug or corruption.
In either case follow these steps and you should be able to resolve without re-building and importing/exporting objects:
=================================================
If you try changing the database password by
1. Open exclusive mode
2. Click info
3. If the Decruypt button appears then click and change the password.
If not try below
It is possible to remove the password as follows:
Again open Access database in EXCLUSIVE mode
Press Ctrl+G to activate the Immediate window in the Visual Basic Editor. (With MS Access )
Type or copy/paste the following line:
Code:
a) CurrentDb.NewPassword
"enter old password", ""
With the insertion point anywhere in the line, press <Enter.>
Examples
1. Remove the password assume the current password is : SnowFlake123
CurrentDb.NewPassword "SnowFlake123", ""
2. Change the password to SpringWater123” assume the current password is : SnowFlake123
CurrentDb.NewPassword "SnowFlake123", "SpringWater123"
================================================
This worked for me. I used option 1 and removed the password. Then compact and repaired.
Restarted without the password and then ENCRYPTED with PASSWORD. I used a password with upper, lower case and numbers. No special characters.
I tried to follow the steps to remove the passowrd and now my "DECRYPT...." shows up under file, info.

Have changed from I phone too samsung galaxy 4 but cannot receive texts from people with I phones can u help please

Hi can you tell me why I can not receive text messages from a I phone too my samsung galaxy s4 having had a I phone before

Agreed. Should not be an issue if they use text messages.   iMessage will NOT work to a non Apple device.
I have the GS3 and a house full of Apple products.   I really love the phone and am hoping to get the Note 3 in a few months.
Have you added 'SmoothSync for Cloud' to your accounts in the settings?   This allows mail, calendar and contacts to sync between your Apple and Galaxy.
you should also add DropBox
You might look at Swiftkey as your keyboard as it is much better than the stock keyboard.
I also paid for Enpass, which is an encrypted password storage.   It syncs back and forth with dropbox.

ORA-01446: cannot select ROWID from view with DISTINCT, GROUP BY, etc.

Hi,
I have created view by joining two tables...And it is like this...
Create view Test_Data as
Select t.column1, t.column2, t.rowid from table1 t
union s.column1,s.column2, s.rowid from table2 s
with read only...
Now I executed the following stmt...
Select * from Test_Data where rowid = objid_ where I am passing the objid_ value...But it gave me the above error...can not I run this select stmt using the rowid ?
Any input is highly appreciated...
Thanks And Best Regards,
/Dinesh...
Hi All Again,
I created the view in the following way...Just to check...
CREATE VIEW my_view AS
SELECT t.col1 col1,
t.col2 col2,
t.rowid objid
FROM table1 t
WHERE rownum < 400
UNION
SELECT q.col1 col1,
q.col2 col2,
q.rowid objid
FROM table2 q
WITH read only;
Then I executed the following stmt...
Select * from my_view where rowid = objid_
Then I did not get that Oracle Error ORA-01446, Does anybody have any clue regarding this matter, i.e. how the use of rownum solve this prob...
Thanks And Best Regards,
/Dinesh...
Edited by: user521478 on Aug 9, 2010 4:46 PM

Check this:
SQL> create view my_view as select rowid rd from dual;
View created.
SQL> select * from my_view;
RD
AAAACsAABAAAAGiAAA
SQL> select * from my_view where rd = 'AAAACsAABAAAAGiAAA';
RD
AAAACsAABAAAAGiAAA
SQL> So your create view statement should be:
Create view Test_Data as
Select t.column1, t.column2, t.rowid rd from table1 t
union s.column1,s.column2, s.rowid from table2 s
with read onlyThen try:
Select * from Test_Data where rd = objid;Edited by: AP on Jul 28, 2010 2:19 AM

Cannot synchronize passwords from DS with ISW

Similar Messages

Maybe you are looking for