Cannot syncronize with the Outlook

Treo 750 Unlocked GSMConnecting to a PC through USB sync cable
Message:Cannot syncronize with the Outlook profile you are using, because a different profile was previously set up or the profile is password protected
Please open outlook using the apropriate profile
Suport code 8503001f
Post relates to: Treo 750 (Cingular)
Post relates to: Treo 750 (Cingular)
This question was solved.
View Solution.

We'll start simple to see if it works. Lets try deleting the partnerships on both the PC and Device.
To do this on the PC, open Activesync. In Activesync click "File" then "Delete Mobile Device". A prompt should come up and agree to it.
On the mobile device to to Start > Programs > Activesync > Menu > Options > Delete. Again, a prompt will come up and agree to it. Try syncing again and see what happens.
I hope this helps and let me know how it goes
Post relates to: Treo 800w (Sprint)

Similar Messages

There is a problem with the Outlook database. Your database could not be rebuilt. [-18000]

For home use, I recently changed from Windows PC to MacBook Air. I have an iPhone 4 which I synched without problem to the PC. Since I have used Outlook for years on Windows and trusted advisors assured me Microsoft Office on the Mac is the same as Microsoft Office on Windows, I decided to continue using Microsoft Office. Because I cannot get my Outlook calendar to sync reliably to iCal / iPhone and because I have found a small but meaningful number of features I use daily in Outlook Windows do not work on Outlook Mac, I have never been in so much pain!
The latest problem is Outlook does not complete startup. I get this error:
There is a problem with the Outlook database. To use the database, you must rebuild it using the Database Utility.
I run the utility but it never completes successfully.
Step 1 of 5: Scannning...
Step 2 of 5: Verifying...
Step 3 of 5: Copying records to new database...
Step 4 of 5: Recovering data...
Your database could not be rebuilt. [-18000]
I have found many articles about this problem but they all seem to assume that you can successfully start Outlook then you rebuild the database to fix data corruption in Outlook.
What if I Outlook never completes startup?

Here are the steps that solved the Outlook data corruption problem.
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macoutlook/your-datab ase-could-not-be-rebuilt/5caff467-3ab2-464a-9fe6-00ad913b5f2e
The question was: Your database could not be rebuilt
The key is to create a new Outlook Identity, remove the database file, then copy your data records into the new identity and use the Outlook database utility to rebuild the database.
It's a wonderful feeling to see Outlook start up successfully after a few days of downtime!

How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP

How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP

Kappy wrote:
Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
Boot into Recovery (hold ⌘R on boot)
Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
Quit Disk Utility
Then Select: Restore from a Time Machine Backup.

Jabber for Mac 9.2.1 Cannot communicate with the server

Hi All,
I'm using Webex and the Jabber for Mac 9.2.1 client that was automatically pushed. I see "Cannot communicate with the server" when I attempt to login.
The same credentials work correctly when using the 8.6.5 client version. I've attached the problem report file.
I would appreciate some guidance on what I need to do to get this to work.
Cheers,
Steve

We've seen this with a few of our users as well. All started noticing having issues Friday morning. As this is a hosted service for us via webex we had our engineers call in to Jabber support. Cisco performed a modification to their account and they were able to connect again. No SRV records were messed with.
***EDIT*** - This appears to have been caused by a certificate issue. The Trusted Root Certificate for QuoVadis expired and was not renewed on some machines.
Go here: https://www.quovadisglobal.com/QVRepository/DownloadRootsAndCRL.aspx
Install the Cert for : QuoVadis Root CA2 (in windows, download as DER>right click file>install)
Jabber should connect now. The issue was in SSL validation with the appropriate hosted servers.

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

I am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

LDOM Issue on T2000 ldmd cannot communicate with the hypervisor as the re

Hi,
There were some issues with old primary LDOM at T2000 so I installed
new o/s 64 bit on SUN SPARC T2000 and reset SC on factor-default and
also installed LDOM 1.2 version. Seems like old hypervisor is not
deleted.
Now I am getting error.
#ldm list
Failed to connect to logical domain manager: Connection refused
So far I have trying the following steps. but still no luck
I installed version 1.2 LDOM. and also I updated SC. Plus I installed
below patches:
•118833-36, Kernel update patch
•124921-02, which contains updates to the Logical Domains 1.0 drivers
and utilities
•125043-01, which contains updates to the qcn (console) drivers.
SC> bootmode config="factory-default"
SC> poweroff
SC> resetsc -y
SC> poweron
Now I tried everything but still no luck
Here are some errot which I am getting
#Svcs -xv
[ Oct 5 00:07:14 Method "start" exited with status 96 ]
[ Oct 5 00:32:11 Leaving maintenance because disable requested. ]
[ Oct 5 00:32:11 Disabled. ]
[ Oct 5 00:32:21 Enabled. ]
[ Oct 5 00:32:21 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
Service LOG file Info:
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:32:21 Method "start" exited with status 96 ]
[ Oct 5 00:43:54 Leaving maintenance because disable requested. ]
[ Oct 5 00:43:54 Disabled. ]
[ Oct 5 00:45:19 Enabled. ]
[ Oct 5 00:45:19 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:45:19 Method "start" exited with status 96 ]
[ Oct 5 00:45:19 Rereading configuration. ]
bash-3.00# cd /opt/SUNWldm/bin/
bash-3.00# ls
ldm ldmconfig ldmd ldmd_start schemas
bash-3.00# ./ldmd_start
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
bash-3.00# ldm
Failed to connect to logical domain manager: Connection refused
bash-3.00# sc>
sc> showhost
Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
Host flash versions:
OBP 4.30.4.d 2011/07/06 14:29
Hypervisor 1.7.3.c 2010/07/09 15:14
POST 4.30.4.b 2010/07/09 14:24
bash-3.00#
bash-3.00# uname -a
SunOS ldom-srv 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200
Thanks in advance

Hi,
There were some issues with old primary LDOM at T2000 so I installed
new o/s 64 bit on SUN SPARC T2000 and reset SC on factor-default and
also installed LDOM 1.2 version. Seems like old hypervisor is not
deleted.
Now I am getting error.
#ldm list
Failed to connect to logical domain manager: Connection refused
So far I have trying the following steps. but still no luck
I installed version 1.2 LDOM. and also I updated SC. Plus I installed
below patches:
•118833-36, Kernel update patch
•124921-02, which contains updates to the Logical Domains 1.0 drivers
and utilities
•125043-01, which contains updates to the qcn (console) drivers.
SC> bootmode config="factory-default"
SC> poweroff
SC> resetsc -y
SC> poweron
Now I tried everything but still no luck
Here are some errot which I am getting
#Svcs -xv
[ Oct 5 00:07:14 Method "start" exited with status 96 ]
[ Oct 5 00:32:11 Leaving maintenance because disable requested. ]
[ Oct 5 00:32:11 Disabled. ]
[ Oct 5 00:32:21 Enabled. ]
[ Oct 5 00:32:21 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
Service LOG file Info:
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:32:21 Method "start" exited with status 96 ]
[ Oct 5 00:43:54 Leaving maintenance because disable requested. ]
[ Oct 5 00:43:54 Disabled. ]
[ Oct 5 00:45:19 Enabled. ]
[ Oct 5 00:45:19 Executing start method ("/opt/SUNWldm/bin/ldmd_start") ]
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
[ Oct 5 00:45:19 Method "start" exited with status 96 ]
[ Oct 5 00:45:19 Rereading configuration. ]
bash-3.00# cd /opt/SUNWldm/bin/
bash-3.00# ls
ldm ldmconfig ldmd ldmd_start schemas
bash-3.00# ./ldmd_start
ldmd cannot communicate with the hypervisor as the required device
does not exist:
/devices/virtual-devices@100/channel-devices@200/virtual-channel@0:hvctl
Either this is not the control domain or the firmware does not support LDoms
bash-3.00# ldm
Failed to connect to logical domain manager: Connection refused
bash-3.00# sc>
sc> showhost
Sun-Fire-T2000 System Firmware 6.7.12 2011/07/06 20:03
Host flash versions:
OBP 4.30.4.d 2011/07/06 14:29
Hypervisor 1.7.3.c 2010/07/09 15:14
POST 4.30.4.b 2010/07/09 14:24
bash-3.00#
bash-3.00# uname -a
SunOS ldom-srv 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200
Thanks in advance

I cannot past with the lastest version. CTRL V does not work either

I cannot past with the the most recent version released today. CTRL V does not work either
== This happened ==
Every time Firefox opened
== When my system updated the newest version today

Issues with the right-click context menu not working can be caused by the [http://toolbar.yahoo.com/ Yahoo Toolbar] (Tools > Add-ons > Extensions)
See:
[[Troubleshooting extensions and themes]]
http://support.mozilla.com/en-US/forum/1/380010
https://support.mozilla.com/en-US/forum/1/552540?
https://support.mozilla.com/en-US/forum/1/472971
Also see:
https://support.mozilla.com/en-US/kb/Clipboard+not+working
http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings
http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. ~~red:1.5.0_02 (very old)~~; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Name cannot begin with the '\"' character, hexadecimal value 0x22

I am trying to create Calculated Column in SharePoint Document Library using Client Object Model.
However getting following error while executing FieldSchema:
Name cannot begin with the '\"' character, hexadecimal value 0x22
Code:
var calculated = "Calculated";
var displayName = "Effective Date";
var internalName = "Effective Date";
var formula = "=IF(ISBLANK(Col_DocumentEffectiveDate),\"\",TEXT(Col_DocumentEffectiveDate,\"DD-Mmm-YYYY\"))";
List lib = clientContext.Web.Lists.GetByTitle(docLibName);
clientContext.Load(lib);
clientContext.ExecuteQuery();
string fieldSchema = "<Field Type=\"" + calculated + "\" DisplayName=\"" + displayName + "\" Name=\"" +internalName+ "\" Formula=\"" + formula + "\"
/>";
lib.Fields.AddFieldAsXml(fieldSchema, true, AddFieldOptions.AddFieldInternalNameHint);
clientContext.ExecuteQuery();
Code does't work if i replace quotation marks("\) in Formula with """
Could someone help with issue?

Hi,
I suggest you take the code below which works in my environment to do the test again:
ClientContext clientContext = new ClientContext("http://sp/");
List list = clientContext.Web.Lists.GetByTitle("List2");
FieldCollection fields = list.Fields;
clientContext.Load(fields);
clientContext.ExecuteQuery();
var displayName = "Cal2";
var formula = "=IF(ISBLANK([Created]), \"\" , TEXT([Created], \"DD-Mmm-YYYY\"))";
var fieldSchema = "<Field Type='Calculated' DisplayName='" + displayName + "' ResultType='Text'><Formula>" + formula + "</Formula></Field>";
fields.AddFieldAsXml(fieldSchema, true, AddFieldOptions.DefaultValue);
clientContext.ExecuteQuery();
Feel free to reply if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

CRS-0184: Cannot communicate with the CRS daemon.

I am getting teh foll error when starting up a database
[oracle@linux2 ~]$ srvctl start database -d orcl
PRKH-1010 : Unable to communicate with CRS services.
[oracle@linux2 ~]$ product/crs/bin/crs_start -all
CRS-0184: Cannot communicate with the CRS daemon.
From the available information on the net, I have already tried the below steps.
a) Deleted all the files from /var/tmp/.oracle
b) Ensured that the deamon is running
[oracle@linux2 ~]$ ps -ef | grep crs
root 6192 1 0 15:31 ? 00:00:00 /bin/sh /etc/init.d/init.crsd run
oracle 1284 9630 0 16:02 pts/1 00:00:00 grep crs
c) The foll lines are already added to the /etc/inittab file
h1:3:respawn:/sbin/init.d/init.evmd run >/dev/null 2>&1 </dev/null
h2:3:respawn:/sbin/init.d/init.cssd fatal >/dev/null 2>&1 </dev/null
h3:3:respawn:/sbin/init.d/init.crsd run >/dev/null 2>&1 </dev/null
Plz help. I'm still getting the error on one node of the Cluster.

[oracle@linux2 bin]$ crsctl check crs
Failure 1 contacting CSS daemon
Cannot communicate with CRS
Cannot communicate with EVM
The node is setup on RHEL 4u7 (2.6.9-78.0.13.ELsmp)
The first error in the crsd.log file says
2009-11-05 06:07:57.196: [ CRSOCR][3086907072]0OCR api procr_open_key failed for key CRS.CUR. OCR error code = 4 OCR error msg: PROC-4: The cluster registry key to be operated on does not exist.
Also, I have the '/u02/oradata/orcl' for the OCR and the CSS Files. On thsi node this directory is empty.
Whereas on the other node in the sam cluster, thsi directory contains the OCR and CSS files and their mirrors.
Is my OCR corrupted on thsi node? How can I restore it??

Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

wmv is a Windows Media format. I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
You need
Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
After installation a new Flip4Mac pane will appear in System Preferences. Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
or play the files with VLC
VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
While you're at it you might install:
Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
Perian doen't do WMV but it's handy to get many things to play in Quicktime.
Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed).

Cannot associate with the access point error message

We just got high-speed Internet installed at our house. We have a cable coming into the house that connects to a Linksys WAP54G router in our basement. We have two Dell Dimension computers that we installed Linksys PCI Wireless G Cards into. The computer down the basement is working just fine. The computer upstairs which is directly above the router worked fine the first day. The computer got powered down and upon restart wouldn't connect again. I did a system restore and it worked fine. Windows errored out yesterday, and now even after doing a restore, I cannot get it to connect to the wireless network. The error message "Cannot Associate with the Access Point" comes up. When you search for available wireless networks, none appear. Any ideas?

Try connecting to the network using the Wireless Zero Configuration...just checkout on the right-hand side bottom of the screen pc right-click the Wireless network connetion icon...click view available wireless networks...click refresh network list...on the same list you will see Change the order of preferred networks...on top of the page click wireless networks...in preferred networks...remove each & every network...click OK. Now, once again right-click the Wireless network connetion icon on right-hand side bottom of the screen & click view available wireless networks...click refresh network list...now you will be able to see your wireless network..if its a secured network it will ask you for the wireless wep key...put in the key...where it says confirm the network key & click connect...it will be CONNECTED....and you will be able to go ONLINE WIRELESSLY!!!

On a certain website, it says to click here to download plugin (Java). When executing the download, it says 'the installer cannot proceed with the current Internet Connection settings. I'm running 4.01. It was fine before the upgrade.

On a certain website, it says to click here to download plugin Java Runtime Environment. I receive the message installer cannot proceed with the current Internet Connection settings. It was fine before the upgrade to 4.01. I have another PC that has IE on it and it works fine and again it worked fine until the upgrade to 4.01. I've done the off-line download but in Firefox it still says I need the plugin and still results in the installer cannot proceed with the current Internet Connection settings.

You can install Java from here: http://www.java.com/en/ 
You also need to update your Flash installation since the one you have at the moment exposes your system to attack. It's a similar story for Adobe Reader.
See: 
* http://www.adobe.com/support/security/bulletins/apsb11-12.html 
* http://www.adobe.com/support/security/bulletins/apsb11-08.html 
Download from here: 
* Adobe Flash: http://get.adobe.com/flashplayer/ 
* Adobe Shockwave For Director: http://get.adobe.com/shockwave/ 
* Adobe Reader: http://get.adobe.com/reader/?promoid=BUIGO

Jabber is unable to register through expressway (Error:Cannot communicate with the server)

Hello Experts !
I am getting below error while trying to login in jabber through expressway . Please help me to fix this issue
Attached is the file .
(Error:Cannot communicate with the server)
Regards;
KV

Ok, let's clarify, what u have (correct me, where I am wrong):
1. We assume,that outside server's config is okay (there are only collab_edge srv for outside domain);
2. Traversal Zone is up (everything is okay with certs, IM&P nodes,CM are added);
3. Both domains (inside/outisde) are created on E/C and properly configured;
4.Inside DNS server has has srv records (cuplogin,cisco-uds) for both domains:outside,inside;
If yes, then you need to reset jabber, make "ipconfig /flashdns" on client, flash dns on E/C.
Start logging with packet captures and tries to login. After that, start checking from packet captures: client, E/C. Try to search for DNS lookups, if evry node tries to find appropriate server (client->E, C->IM&P) .
Regards,
Kirill

I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade

I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please

Hi there soulboycraney,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/ts3581
-Griff W.

Cannot syncronize with the Outlook

Similar Messages

Maybe you are looking for