Cannot take padlock off my hub connection and i think this is what is causing me problems printing as not same server as my printer. help
On my wifi connections,I cannot take the padlock off.I have put in the password that is on my hub but still cannot remove.How can I find the right password to remove the padlock?
You need to "enter" router/hub to disable/change password.
Similar Messages
-
I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.
I have an Ipod touch and cannot take it off headphone mode, Can anyone help please.
Thankyou- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
On my Iphone I have 1-Camera roll, two Photo Libraries, and 1 delete. I cannot get rid of the Photo albums off the phone. I cannot take things off my Iphone using the itunes because it doesn't pull the Iphone up.
Pat2006 wrote:
I cannot take things off my Iphone using the itunes because it doesn't pull the Iphone up.
Correct. You don't use iTunes to get photos off the iPhone.
See this -> http://support.apple.com/kb/HT4083 -
When I go from cable tv to apple and click on netflix it tells me that it cannot connect and to try later. What is the problem, it has been happening for 2 weeks?
Power cycle the ATV and router.
-
How do i take pictures off my time capsule and onto my new mac?
how do i take pictures off my time capsule and onto my new mac?
See Here > http://support.apple.com/kb/HT4083
-
I cannot control the sensor on my Mac, it moves by itself, and opens different pages. What can cause this problem? please help me.
There are several possible causes for this issue. Take each of the following steps until it's resolved.
1. Follow the instructions in this support article.
2. Reset the System Management Controller.
3. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
4. A swollen battery in a MacBook Pro or Air can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced.
5. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
6. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
7. If none of the above applies, or if you have good reason to think your computer is being controlled remotely, remove it from the network by turning off Wi-Fi, disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop immediately, you should suspect an intrusion. -
I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV. Not for movies, music, YouTube etc. I have checked all of the connections and the video is xlnt. Have also toggled thru all possible Dolby/Audio combinations in settings. Help! Any suggestions?
Hello again Parker -
The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor. To that I added the Apple TV. The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor.
[I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
So now I have:
HDMI from the Cable Box to the Receiver
HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
HDMI from the Receiver to the Monitor
RCA's from the Receiver to the Subwoofer and the other speakers
In addition I have some backup connections:
S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
S-Video from the Receiver to the Monitor
Wait - JUST FOUND IT!
By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links. The video moved but the audio didn't. Turns out the monitor was using the optical audio feed from the receiver. So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed! Looked promising...
So I first connected an optical audio feed from the ATV to the receiver - Audio! Then I pulled it, but the audio didn't switch to the HDMI feed. It stopped. Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
This is becoming a career! Any suggestions?
Will -
My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet? What could be the problem? How long do the Time Capsules usually last?
That it is still working is miraclous.. most have died.. lots started flaking out at 18months to 2years..
See deadtimecapsule.org
The few that remained now seem to have reached EOL.. you can repair if you have some skills.. fairly cheaply.
But it is well and truly time to replace.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair -
I am trying to remove the older version of iTunes but an error message appears saying that it cannot find the path to 'iTunes64.msi", and I tried the search option to find it on my computer but no such luck. Please help me
Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over. -
why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.
This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013 -
My Iphone 3 gs is restarting, and a screen to connect to Itunes.When I connect, and restoration, in order to process the information appears: "An unknown error occurred in the restoration(-1)". Help me please!
That is a baseband error. Has your phone ever been illegitimately unlocked? If so, that problem happens. If you haven't jailbroken/unlocked, visit your local Genius Bar.
-
iPhone 4s.used to get swoosh sound every time I got an email. Now I don't and I have to open email for it to connect and get new messages. What do I do?
Once you purchase or download an app it will always be associated with the Apple ID used to download it. When that app requires and update you must use the Apple ID and password used to download it in the first place. The only way around this is to delete the apps the require the old Apple ID and download or purchase them again with the new Apple ID.
-
When I try to sign into my iMessage account, it pops up 'could not sign in. Please check your network connection and try again'. I've checked my connection and it works perfectly. What can I do?
You could try going into settings then messages and seeing if you have it turned on. You will need to use your apple ID then, hope that helps.
-
I'm on the phone with my Husband and I take the phone from my face and there is this red light. It's creepy, when I put my headphones in it went away.
You might be seeing the proximity sensor. It is how the phone tells when it's near your face and blanks the screen so you don't accidentally touch things with your cheek. It's near the front facing camera.
-
I have installed osx mountain lion, it worked great for past months but recently, my mac takes lots of time to startup and sometimes gets stuck.. what should i do??
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
System Preferences > Startup Disk
Select your Startup Disk
Maybe you are looking for
-
I was reading email.... and got a worm... avg and malware got it... I called microsoft and they also finished cleaning up the mess from the worm... But now the laptop will not hold the internet signal for more than a minute or two before it disconnec
-
House bank information on f110 form
I am working with the f110 printing of the "collective order" form. on our form, the user wants to see the house bank. the developer before created text variants (so10) to hold the house bank data and used an include in the form. My question that why
-
How to invoke a short lived process using web service start point?
I have a custom short-lived process that does not take any input parameter. I am able to successfully invoke the process from LiveCycle Workbench ES2. I want this process to be invoked by a java client through a web service call. Apart from the web s
-
Hi, i have a drop down which shows month and year like Jan07,Feb07,Mar07,Apr07...Dec07. in the backing bean using the item seleted i want to create a date. for example if May07 is selected i want to get it as 1-may-07 in java.util.Date format. Help m
-
Marquee "ghosts" when moved in CS6
Basically this happpens in CS6 when using the Marquee tool and moving the marquee with the arrow keys or dragging inside the marquee. Does not repeat in CS4. About the only way to make it go away is to reduce cache levels in Preferences > Performanc