Cannot transfer files to and from WebDav server

I having much difficulty transferring files to and from our new WebDav server when using Finder's Connect to Server. I am able to connect and authenticate just fine. Although, when dragging and dropping to a mounted drive, I receive the following errors, then subsequently dropped from the sever.
...Unexpected Error Occurred - Error code 1407
...cannot comple the operation because some data in "" could not be read or written - Error code 36
...Unexpected Error Occurred - Error code 1407
This seems to be an issue affecting all 10.5 users in our university. PC's and 10.4 do not seem to be having this issue. When using CyberDuck and Goliath, I cannot login to the server whatsoever.
Any thoughts?

Same problem here with the finder.
But Cyberduck (ver. 3.2, build 4648) works fine.

Similar Messages

  • How to transfer files to and from iPad air using bluetooth

    How can I transfer file to and from my iPad using Bluetooth to another Bluetooth-enabled device?  Is there an app for this? 

    iOS devices do not have the Bluetooth profile for file transfer. Even if the other device is a an iOS device, you can't transfer files over BT. You can use Airdrop between iOS devices. However, even though Airdrop uses BT to locate other devices, the actual transfer is done over WiFi. There are some apps in the App Store that, if loaded on both iOS devices will allow limited file transfer over BT between the devices.

  • How to transfer files to and from the BB PlayBook

    Overview
    The following sections outline different methods of transfering files to and from the BlackBerry® PlayBook™.
    Wi-Fi® Sharing
    Complete the following steps to share files over a Wi-Fi connection:
    From the BlackBerry PlayBook home screen, select the settings icon.
    Select Storage and Sharing.
    Toggle Wi-Fi Sharing to ON.
    Tap Properties to verify network identification information. (PlayBook name, password etc)
    From a Windows or Mac based computer on the same network as the BlackBerry PlayBook, navigate to the IP address of the PlayBook which can be found under Settings > About > Network.
    On a Windows computer, open the Run dialog box and type \\127.1.1.1 (where 127.1.1.1 should be replaced with the actual IP address of the BlackBerry PlayBook)
    On a Mac computer, select Go -> Connect to Server... and type smb://127.1.1.1 (where 127.1.1.1 should be replaced with the actual IP address of the BlackBerry PlayBook)
    Users will then connect to the media folder which contains several subfolders such as documents, music, photos, videos etc.  Users can then move files between the computer and these folders.
    File Sharing with a Mac via USB connection
    To share files between a Mac and the BlackBerry PlayBook, BlackBerry® Device Manager will need to be installed. Complete the following steps to install BlackBerry Device Manager:
    Connect the BlackBerry PlayBook to the Mac.
    On the desktop or within Finder, double click BlackBerry PlayBook CD.
    Double click the BlackBerry Device Manager Installer to start the installation process.
    After reviewing the Read Me and License Agreement click Continue Installation.
    Reboot the computer when prompted.
    After the reboot is complete and the PlayBook is started, a message may be presented stating that a new network interface has been detected.  If this is the case, click on Network Preferences and click Apply.
    You may receive the error message  "You can't install the 'Network' preferences pane because it is already installed". *** If you receive this message,  See the additional notes for further steps, otherwise continue to step 8.
    After the PlayBook has been setup in Network Preferences, the PlayBook share will appear on the desktop whenever the PlayBook is connected to the computer.
    Click the Playbook icon on the desktop to display the PlayBook share.  Users can then move files between the computer and the PlayBook.
    File Sharing with a Windows® PC via USB connection
    To share files between a Windows based PC and the BlackBerry PlayBook, BlackBerry Device Manager will need to be installed. Complete the following steps to install BlackBerry Device Manager:
    Connect the BlackBerry PlayBook to the computer via USB cable.
    If BlackBerry Device Manager is not yet installed, the PlayBook will display a screen entitled Installing Drivers.
    On the computer, double click the BlackBerry PlayBook CD drive icon.
     Open the Drivers folder.
    Double click Setup.exe
    After selecting the appropriate region and accepting the License Agreement select Install.
    Select Finish and then OK to the prompt confirming that the PlayBook will need to be disconnected and then reconnected prior to use.
    Once reconnected to the computer, the BlackBerry PlayBook will be mounted as a Network Drive labelled PlayBook [PIN: 500AAAAA].  Double click the network drive icon to access the PlayBook folders.  Users can then move files between the computer and the PlayBook.
    Environment
    BlackBerry® PlayBook™
    Additional Information
    If you receive the error message  "You can't install the 'Network' preferences pane because it is already installed" while attempting to install the Network Device, complete the following steps:
    1. Click Ok and Navigate to System Preferences > Network
    2. Click Ok to accept the network changes. If you do not see the acceptance prompt, continue to the next step.
    3. Click the "+" under the listed device.
    4. Click Create on the RIM Network device interface screen
    Additional Notes:
    File and Folder creation is only available on the playbook within the sub directories of the file structure.  No folders can be created on the root folder of the drive.  This is by design.
    The main folders of the playbook are not meant to be modified renamed deleted or changed.  This is by design.
    While any file type can physically moved to the playbook the files capable of being opened by the playbook are still limited to KB26606, as well as KB26518.
    PLEASE DON'T FORGET TO GIVE KUDOS BY CLICKING THE STAR BELOW. THANKS

    After you connect your tablet via wifi in the network, you can also share files doing this:
    I personally have windows 7 in my laptops, and when I need to transfer files using my laptop, I open network and sharing center, then I click on see full map and finally I click on the icon  playbook-a185, the next screen will show you 2 folders: certs and media.
    Another way is opening windows explorer and on the left under network, see the computers listed on the network, find playbook-a185, click on it and will open the folders.
    Note: make sure you have file sharing and wifi sharing ON on the playbook. I turn OFF password protect so will be easier to access your files, and when you are done, you can turn password protection ON.
    Give kudos by clicking on the start please.
    Thanks!!

  • Cannot transfer file into DB from client with webutil

    Transfering file from client to DB will fail if the file is at a network path(not be mapped) or path contains Chinese character. for instance:
    \\server\temp\test.bmp
    C:\(Chinese character)\test.bmp
    But it can work fine with the file list below ( I map \\server\temp to T: ) :
    C:\test.bmp
    T:\test.bmp
    Thanks for any reply!

    I've got a similar problem related to this issue. Using the Client_Get_File_Name function to return a UNC path name and file the value returned drops the first backslash so instead of:
    \\server\directory\file.bmp
    I get:
    \server\directory\file.bmp
    Similar to Sunny, we don't want users to have to copy files to their local drives in order to load them into the database. We use Client_Get_File_Name to identify the file the user wants to load and then we use Read_Image_File to load it. Its passing the incorrect value into Read_Image_File that is causing our problem.
    Is there a workaround for this, can we stop Client_Get_File_Name from losing the first backslash?
    Thanks
    Richard

  • My Zen Xtra sucks. Really hard to transfer files to and from

    It's kinda old (big clunky Nomad Jukebox Zen Xtra, 30 gig). When I got this laptop in August, I downloaded some software to allow me to transfer files from it (I had broken the CD that came with it).
    The media source thing won't recognize my mp3 player at all. The Nomad Explorer works, but files transfer EXTREMELY slow, it takes like 0 minutes just to open a folder, and usually a file transfer or simple opening of a folder will fail (It basically takes me half an hour to get into my DATA folder, and even then, I can't transfer stuff out of it, because it freezes up and fails half the time).
    I tried just accessing it as a USB device through windows XP, and that also won't work. Windows XP can't see my DATA folder, and it also can't get files out of my mp3 player.
    So, any help? Do I need new firmware? New software? I'd like to backup all my music onto my laptop (I don't even use the MP3 player that much anymore anyway, mostly because of the issues I've been having.) and reorganize it, etc.
    Direct links if you help please.

    Unfortunately it's unavoidable if you're going from a .x (PDE) firmware to a 2.x (MTP) firmware, the change is quite big and it has to format the player during that process. Did you try just reloading the .20.08 firmware? Have you updated to the MTP firmware now (and formatted the player)?
    It's always best to keep a back-up of your music so you can easily transfer them back again.
    Cat

  • Have new MacBook Air and old MacBook. Can send file from Air to MacBook by Bluetooth but cannot transfer file from MacBook to Air.

    Have new MacBook Air and old MacBook (2 1/2 years old). Can transfer files from Air to MacBook by Bluetooth but cannot transfer file from MacBook to Air. When I try, MacBook does not recognize Air. File transfer only goes in one direction. Any solution to this problem? Regards

    The Setup Assistant can restore your data from a Time Machine backup. You'll be asked if you want to do this the first time you turn the computer on.
    (60797)

  • I'm using itools 2013  1115 beta and I'm using iTunes-10-6-3-25 before i was using iTunes 5-1-1 but my itools cannot transfer file to my iPhone it gives this message (unable to ascertain compatibility iTunes.) check out..... my iPhone 4 (16GB) has the lat

    I'm using itools 2013  1115 beta
    and I'm using iTunes-10-6-3-25
    before i was using iTunes 5-1-1
    and i was using iTools 2012
    but my itools cannot transfer file to my iPhone it gives this message (unable to ascertain compatibility iTunes.) check out.....
    my iPhone 4 (16GB) has the latest version 7.1.1
    can you please tell me how to transfer files from my pc to my iPhone?

    Not in a Public forum
    If you have access th Beta then you should be in the Developer Forum and posting there not here

  • I cannot transfer files from my MacBook to my external hard drive anymore.

    I cannot transfer files from my MacBook to my external hard drive anymore. The device responds with error-36 about documents being unreadable and unwritable. Previously the device worked fine.
    External Hard Drive
    I have an imation Apollo II 2.5" Portable HDD 320GB.
    163 GB available.
    Macbook
    Model Name: MacBook Finder Version 10.6.8
      Model Identifier: MacBook6,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.26 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 2 GB
      Bus Speed: 1.07 GHz

    It still doesn't seem to work.
    The Finder can’t complete the operation because some data in “POLITICS COMPARATIVE POLITICS IN GLOBAL WORLD” can’t be read or written.
    (Error code -36)
    The device is also formatted in Mac OS extended

  • How do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

    how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls

    Welcome to Apple Support Communities
    When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
    To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it

  • HT1918 I cannot access files I uploaded from an old computer.  The email account to which some tracks are connected is deleted. For some reason my birth date doesn't work either. Is there some way to transfer the files to my current address?

    I cannot access files I uploaded from an old computer. The email account to which some tracks are connected is deleted. For some reason my birth date doesn't work either. Is there some way to transfer the files to my current address and username?

    Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
    Apple's iWork suite (Pages, Numbers, and Keynote.)
    Open Office (Office 2007-like suite compatible with OS X.)
    NeoOffice (similar to Open Office.)
    LibreOffice (a new direction for the Open Office suite.)

  • Transfer of large files to and from Egnyte failing...

    One of my clients uses Egnyte for file management. For a typical job I will usually be required to download 5GB of files and upload 1.5GB.
    However, when at home, transfer of large files to and from Egnyte will often fail. (On download, Chrome gives the error message: "connection failed". Uploading, Egnyte's error message is: "HTTP error").
    I have three machines at home. Two Macs (running Yosemite and Lion) and a PC running Windows 7. I've had no luck with any of them on any browser but when using other people's broadband I have no problem at all (using my MacBook).
    I have no firewalls running. Yes, I've turned everything on-and-off-again. So that leaves me to think that the problem lies with my BT Homehub 4 router. But why would my router be botching the transfer of large files? I've switched the router's firewall off, tried adding my Mac to DMZ (whatever that is) but that seems to be the most I can do. Ethernet is no different to wireless.
    I've not noticed this porblem when using other file transfer sites (like WeTransfer).
    What's going on?
    Please help!

    From my own experience (I admin a few gaming servers and often get disconnections from them in the middle of monitoring operations) and based on other users experiences here on the forums I suspect BT have been having some core infrastructure issues which can lead to A) intermittent packet loss B) extended packet delay - both of which can cause servers to assume a 'failure' and disconnect or suspend upload/download.
    I dont know what package you are on from BT (I'm Infinity 2) << and as its Hogmany im the one that drawn the short straw to keep cheaters off out servers << so I'm a bit intoxicated and may not make total sense atm.
    https://community.bt.com/t5/BT-Infinity-Speed-Connection/BT-Infinity-issues-for-the-last-few-days/td...
    ^^ this thread illustrates issues that people have been having over the last few weeks.
    This probably wont help - but it might make you aware that you arent alone in ONGOING issues.
    Happy New Year !

  • Cannot transfer files using Creative Media Sou

    I cannot Cannot transfer files using from my PC to my Creative Jukebox 0GB using Creative Media Source. Since I installed Windows Media Player 0, it seems that Windows Media Player 0 is the only program enabled to transfer files to my creative Jukebox. I would just go ahead and use Media Player, but Media Player won't let me change my library to one designated music file folder location. Media Player wants to find every copy of the same song on my system and is very difficult to use to transfer the files to my Jukebox device. Is there any fix to make Creative Media Source the preferred (or only) program used to transfer the files from PC to device?

    i am having a similar problem, although i have not downloaded windows media player 0. The creative mediasource software wont let me transfer songs onto my zen touch (20G). i only got the player a couple of days ago and it only has about 400 songs on it so far so there's no problem with the memory. I had problems before where it wouldnt let me upload anything that began with a letter after 's' in the alphabet! i solved this (no idea how) but the problem seems to have come back and now it wont let me up load anything. When i atempt to, it comes up with the prompt "unable to read file. file may be in use, missing or corrupted." (which they arent as far as i know) I also, for some reason, cannot play any songs through creative mediasource - even though i could a few hours ago!
    Please could someone help as this is very frustrating!!!!!!

  • VLAN : Cannot transfer files switch 3500XL

    Hello,
    i have configured VLAN's on my switch(802.1q ) with a linux machine as a router.and i cannot transfer files through SCP or FTP from nodes.It pings but is not able to transfer files.can u please expain ? the network cards on my linux machine are intel pro 100

    If you can ping through the linux router from one VLAN to another then this would suggest that routing is working correctly.
    I would check whether the Linux machine is using IP chains or similar which i believe is software that provides a firewall function and could potentially be blocking various ports.
    How many VLANs are you routing between, the reason i ask is that you mentioned 802.1q which is used for trunking VLANs over a single link. How does this fit in with Linux as i wouldn't have thought a Linux machine can differentiate between 802.1q and non 802.1q frames.
    HTH
    PJD

  • How to transfer files like music from mac to ipad? tried it using mac but what happen was opposite!

    how to transfer files like music from mac to ipad? tried it few times but what happen was the opposite.

    If you want to sync your iTunes library on your Mac to your iPad ....
    Connect your iPad to the Mac and launch iTunes. Click on your iPad's name on the left side under the devices heading. Then click on the Music tab - and select the music that you want to transfer. Does your iTunes window look like this - with Sync Music checked and the playlists or albums checked as well like in the photo below?
    When you click on the apps tab do you have Sync Apps checked and all of the apps in the window below checked to sync as well?
    If you select all of the items under the different tabs in iTunes - music, apps, photos. etc. - when you sync - all of the selected content should sync over to the iPad.

  • TS1702 With the latestes version of itunes I cannot transfer files to my apps.  There is no "File Sharing" section.

    With the latest version of itunes I cannot transfer files to my apps.  There is no "File Sharing" section.

    Yes there is.
    Connect the iPad to your computer. Launch iTunes and at the menu at the top of the screen, go to View>Show Sidebar. After you have the sidebar, click on your iPad name like you did in the past. Click on the Apps tab in the window on the right. Scroll down to File Sharing apps.

Maybe you are looking for