Cannot transfer large files between drives - data can't be read or written

Hi there!
I am trying to transfer a couple of large files to a hard drive from my internal ssd. Both are set to Mac OS Extended (Journaled). Small files transfer fine, but large ones (eg. 20GB) get a varying distance through and then the following error message comes up:
The Finder can't complete the operation because some data in “FILENAME” can’t be read or written. (Error code -36)
I have tried to ensure read&write permissions are allowed, but this hasn't helped. This has occurred with multiple files.
Any help would be very much appreciated.
Max

Hi
I exported a movie
How ?
One must/can only move iMovie Events and/or Projects - WITHIN IMOVIE !
Do not alter or move anything in
• iMovie Project folder - or -
• iMovie Events folder
IMovie get's confused - and damage might well be un-repairable !
How was the target hard disk formatted ?
Mac OS Extended - only option that works !
How much space was there on the target hard disk ?
1 hour SD-video needs about 13Gb
HD about 5 times more
I would
• Connect second laptop (Mac) via FireWire
• Start this second one - Keeping T-key down (target mode)
• Now in iMovie Project resp Events window it will show up as an external hard disk
Drag-and-drop Events and/or projects over.
Yours Bengt W

Similar Messages

The Finder can't complete the operation because some data can't be read or written. (Error code -36)

Since the upgrade to 10.9 I have the most annoying issue when copying files. I have a secondary drive for media in which I keeo my media on / Samples / Video etc. I keep an exact copy on 2 external drives.
95% I can't copy the the new media across my drives without a few restarts. I get the following:
The Finder can’t complete the operation because some data can’t be read or written.
(Error code -36)
This is not a permissions issue. I've checked every folder down the the exact file it calls on. Everyone has READ & WRITE. If I restart the computer after getting this message it will do a little bit more then get stuck on another folder or file and pop the message.
If I do smaller chuncks, it seems to do better but not all the time.
PLEASE someone, tell me you have seen this before and you have a workaround. This is killing me,
All HD are OS Extended Journaled - No FAT
MacBook Pro I7
16GB RAM
250SSD
450SSD
2TD Lacie FW800 External
is the equation right now
thanks in advance for any help

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I have been exporting lightroom webgaleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - thoughts?

i have been exporting lightroom web galleries to my iweb site without any problem. Suddenly I get the error message "finder can't complete the operation because some data can't be read or written" - error code -36 - and the move to the sites folder on my idisk fails..... thoughts?

Try this community: MobileMe on my Mac: MobileMe: Apple Support Communities.
And you can continue to use iWeb for some time to come. The following will explain:
It's now confirmed that iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
In addition the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on.
HOWEVER, the iLife 11 boxed version that is still currently available at the online Apple Store (Store button at the top of the page) and those copies still on the shelves of retailers will include iWeb and iDVD.

Re: Transfer Large Files between SAP Systems

Dear All.
Please can someone advice a quick way of transferring large files from one sap system to the other. Can we use ALE? Can Ale handle large files? If there are others ways please advice at your earliest. thx alot

yes ,you can use ALE between two SAP R/3 system..
it is efficient way to transfer from One SAP R/3 to Other SAP R/3

Transfer large files between two Macs over the web

I would like to transfer a number full quality photos from a DSLR between two computers located in different states. Both machines are Macs, running Tiger. I would prefer a direct transfer method rather than breaking the files into email messages, which would be quite time consuming given the size of the files.
What is the best way to accomplish this? If the two machines were on the same local network it would be easy, but they are not so simply enable file sharing doesn't solve the problem (as far as I know). Can I enable FTP access on the host machine and access if from across the web? How would I figure out the proper address from outside the local network (assuming NAT is used on both ends). Is there a program I could use to make the process simpler (some sort of Bittorrent or DC++ program)?
Or is there a good online service that is free that allows large amounts of storage?
Thanks for the suggestions.
-Josh

You could...
...turn on port forwarding in the destination router, forwarding port 22 for ssh to the destination computer
...turn on remote login on the destination computer
...turn on file sharing on the destination computer
...open a Terminal window and type ssh -L5548:localhost:548 [email protected]
where "user" is a valid account name on the destination computer and "IP.of.dest.Computer" is the IP address assigned by the destination computer's ISP to its broadband modem. The destination computer can get this information from http://www.whatismyipaddress.com/ as BDAqua said. Then, so long as the ISP doesn't change the dynamic IP address before you actually do the transfer, you're okay. It's possible to get a free dynamic host name which circumvents this problem.
After all that, then on the source computer, you would just do a ⌘k and enter localhost:5548 and select the shared user account and login, then the remote computer will mount like an icon on the desktop of the source computer, as if it werre a local external drive. Then it's just drag-and-drop. ⌘e when done, then in terminal, type exit and then ⌘q.
I would not leave port 22 forwarded in the router any longer than I had to, unless you do a little work to harden your ssh remote login. However, even if you do nothing to harden it, it is way better as is than leaving ftp open.

Error Code -36: Some data can't be read or written

I keep getting this error when trying to copy from my externals HDs (one usb and other firewire). When I copy a folder the finder copy a few files and later the error pop up with different files from the same folder ( in every try it flag different files). I can not restore my backp of itunes, or any folder because of that. Please Help!

Hi
I exported a movie
How ?
One must/can only move iMovie Events and/or Projects - WITHIN IMOVIE !
Do not alter or move anything in
• iMovie Project folder - or -
• iMovie Events folder
IMovie get's confused - and damage might well be un-repairable !
How was the target hard disk formatted ?
Mac OS Extended - only option that works !
How much space was there on the target hard disk ?
1 hour SD-video needs about 13Gb
HD about 5 times more
I would
• Connect second laptop (Mac) via FireWire
• Start this second one - Keeping T-key down (target mode)
• Now in iMovie Project resp Events window it will show up as an external hard disk
Drag-and-drop Events and/or projects over.
Yours Bengt W

The Finder can't complete the operation because some data in "Chronicles" can't be read or written. (Error code -36)

The Finder can’t complete the operation because some data can’t be read or written.
(Error code -36)
What does this error code mean?

I faced the same problem and i fixed it by going to applications - utility - disk utility and fixing the errors.

Can't transfer large files with remote connection

Hi all,
I'm trying to figure out why we can't transfer large files (< 20MB) over a remote connection.
The remote machine is a G5 running 10.4.11, the files reside on a Mac OS X SATA RAID. We are logged into the remote machine via afp with an administrator's account.
We can transfer files smaller than 20 MB with no problem. When we attempt to transfer files larger than 20 MB, we get the "The operation can't be completed because you don't have sufficient permissions for some of the items."
We can transfer large files from the remote machine to this one (a Mac Pro running 10.4.11) no problem.
The console log reports the following error:
NAT Port Mapping (LLQ event port.): timeout
I'm over my head on this one - does anyone have any ideas?
Thanks,
David

I tried both these things with no luck.
The mDNSResponder starts up right after the force quit - is this right?
The following is the console log, which differs from the previous logs where we had the same problem:
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb4f70 and its source is FOUND
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb3990 and its source is FOUND
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb2b80 and its source is FOUND
DNSServiceProcessResult() returned an error! -65537 - Killing service ref 0x14cb1270 and its source is FOUND
Feb 4 06:13:57 Russia mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[951]: starting
Feb 4 06:13:58 Russia mDNSResponder: Adding browse domain local.
In HrOamApplicationGetCommandBars
In HrOamApplicationGetCommandBars
In HrOamApplicationGetCommandBars
Feb 4 06:23:12 Russia mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[970]: starting
Feb 4 06:23:13 Russia mDNSResponder: Adding browse domain local.
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
Feb 4 06:26:00 Russia configd[35]: rtmsg: error writing to routing socket
[442] http://discussions.apple.com/resources/merge line 4046: ReferenceError: Can't find variable: tinyMCE
Thanks,
David

Can you transfer specified files between an imac & laptop

http://ChucF Can You transfer specified files between a laptop & an imac?

Sure.
There are several possibilities.
You can connect the 2 with FW and start one as Target (keep T pressed during boot). You will see the second Mac as external HD and do the transfer with Finder.
Or you can connect the 2 on the same net with Gigabit Cable or WiFi and again use Finder.
If you need more control in transfer I found Tri-Backup usefull (www.tri-edre.com)

Unable to transfer large files from MB to External HDs

Hi,
This may be an unusual one. My 1st edition Macbook won't let me transfer large files to my external hard-drives, either by USB, Ethernet or wirelessly through my home wi-fi network.
I've started video editing so I'm importing DVcam tapes through firewire from the camera. A full DV tape translates to about 8-12gb I think.
Using iMovie and saving the import to my Freecom 3.5inch network harddrive vis USB or ethernet, it fails saying 'Unexpected error, error code 1309'.
When I try quicktime pro instead to import the tape to the external HD, I get 'Operation could not be completed, An attempt to add a resource to the file failed'. This happens too with my WD 2.5inch external drive.
However, there is no such problem when I import to the MB's internal harddrive. When I then try and shift the large file off the laptop to an external drive, via USB, ethernet of wirelessly, for editing and save keeping, it fails half way through.
I have the same problem when I try back-up my 17gb virtual windows machine I use with VMware fusion off the laptop to an external drive.
I am currently burning an 18gb iMovie project from the MB's internal HD, over 5 DVDs using Toast's disc-spanning and will reimport them to the external, which is really time consuming.
Also to note, Final Cut Express doesn't have these problems as it seems to break up what would be an 18gb movie file into several smaller files, which my MB is quiet happy to let go onto an external drive. However, the problem re-emerges on Final Cut Ex when I try and import a HDV tape. Possibly FCE isn't breaking them up into small enough pieces for my MB to handle?
Any ideas why this is happening and what I can do to fix it? Or does this mean a new laptop?

Irish Apple Fan wrote:
Hi,
This may be an unusual one. My 1st edition Macbook won't let me transfer large files to my external hard-drives, either by USB, Ethernet or wirelessly through my home wi-fi network.
I've started video editing so I'm importing DVcam tapes through firewire from the camera. A full DV tape translates to about 8-12gb I think.
Using iMovie and saving the import to my Freecom 3.5inch network harddrive vis USB or ethernet, it fails saying 'Unexpected error, error code 1309'.
When I try quicktime pro instead to import the tape to the external HD, I get 'Operation could not be completed, An attempt to add a resource to the file failed'. This happens too with my WD 2.5inch external drive.
I'm a bit late to the party, but specifically there's a 4GB file size limit in the FAT32 format that is standard on many external hard drives. I've run across this problem before, and usually it copies over most of the file and then quits when it reaches the limit.

Best way to transfer large files over the Internet?

What is the best way to transfer files that are too large to send by e-mail over the internet, preferably ways that are free or very cheap and are easiest for sender and receiver to work with?
I assume one way is by ftp, but would that necessarily mean buying space on a server somewhere that both I and my recipients can get to? or is there a way to avoid this cost?

you can use a cloud storage like Mobileme (not free) or DropBox (free up to 2GB).
you can also use direct file sharing over internet. no extra software or 3rd party services required. that's what I use to move files between my home and work computers.

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36)."

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?

This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

Trying to copy iPhoto Library to external hard drive for backup. Error message: The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written (Error code -36).

That code is
-36
ioErr
I/O error (bummers)
Make sure the EHD is formatted OS X Extended (journaled) and run Disk Utilty on the EHD and repair the disk. If that fails to help I'd try the following:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button,
navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
In the next window name the new library and select the external HD as the location of the newly rebild library.
Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
OT

Stor.E TV+ doesn't transfer large file or large selection of files

Hi Everyone,
I've just bought a Stor.E TV+ 2TB and I've found a very noisy problem related to file transfers from PC to the HDD trough the LAN (wired &/or wireless).
The unit doesn't transfer large file or large selection of files and hangs the PC process.
Does anyone knows if there's an update firmware or a workaround to solve this?
Looking forward to read from someone.
Thanks
G.

Hi
As far as I know this was solved by firmware update
You could find the firmware on Toshiba European driver page:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
Here choose:
- Options
- Drive Devices
- Multimedia HDDs
- 3.5 inch StorE TV +

Connection drop when transfer large file

We are using a IBM T40 (with 802.11b build-in). We are able to surf web and ping successfully. Once we transfer large file, the connection just drop and the debug log from the AP1200 shows:
Dec 18 10:39:57.095 H: %DOT11-4-MAXRETRIES: Packet to client xxxx.xxxx.xxxx reached max retries, removing the client
Dec 18 10:39:57.095 H: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station xxxx.xxxx.xxxx Reason: Previous authentication no longer valid
However, when we try using Cisco 350 PCMCIA cards and Orinoco, there is no problem with the large file transfer.
We have upgraded the driver to the latest version.
Any help. Thks

This type of error is usually because of RF interference. When the AP sends a packet to the client, the client must ACK this packet back to the AP, if the AP receives no ACK from the client, it will resend this packet. It will continue this process for 16 times (default config) before assuming the client is off the network now (person moved out of range or powered off their computer) and will remove the client from its association table. I would verify coverage via a site survey, looking at not only signal strength, but also signal quality

Cannot transfer large files between drives - data can't be read or written

Similar Messages

Maybe you are looking for