Cannot transport transfer rules!

Hi,
We have a problem transporting the transfer rules from BWD to BWQ.
Here are the steps I did :
New object ZZRANK was added to user exit on R/3 dev. and transported
New infor object ZZRANK was created in BWD
ZZRANK was added as attribute to 0PLANT (mater data)
Transfers were created and comm struc updated.,
testing was successful in Dev, r3 changes were transported to Q and BWD transports to BWQ. ALL info objects transported successfull but the transfer rules failed. Cannot determine why.,
   Start of the after-import method for object type R3TR ISMP (Activation Mode)
   Mapping between data source 0PLANT_ATTR and source system PR2200LS is inconsistent
   Field ZZRANK will not be delivered from DataSource 0PLANT_ATTR in source system PR2200LS
   Mapping between data source 0PLANT_TEXT and source system PR2200LS is inconsistent
   Field KEY1 will not be delivered from DataSource 0PLANT_TEXT in source system PR2200LS
   Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
   The errors affect the following components:
      BW-WHM (Warehouse Management)
Any help is appreciated.

You may have to replicate your data source on BWQ.
First replicate and then send your transport again from BWD to BWQ.
Regards.
Sanjay
Message was edited by:
Sanjay Sinha

Similar Messages

Error when transporting transfer rules

Hi, i got an error when i transport transfer rules. i got the following errors in various transfer rules:
Mapping between data source 0CUSTOMER_ATTR and source system EMP300 is inconsistent
AND
Reference to transfer structure 0CUSTOMER_ATTR_BB not available. No activation possible.
I tried to activate the data sources and transport them several times, but i got the same errors. Checking manually i can see the data sources active in my source system, in development and productive instances.
Thanks in advance.
Diego Lombardini

Hello Diego
Do you choose the correct Transfer Structure in DEV?
I mean the one that is assigned to EMP300.
Are you saying that your PROD have the following:
0customer_text_BA
And that your DEV only have the following:
0customer_text_BB
If the answer to the above questions is YES;
Find out if some one has assigned ATTR to 0CUSTOMER directly in PROD or somebody has changed 0CUSTOMER_ATTR in DEV without transporting it to PROD.
I think that one way to resolve this problem is to use the option "overwrite origanls" in STMS.
Use it with caution and do not mass transport when you use this option.
Good luck
/FZA
Message was edited by: Fariborz Zangoui
Message was edited by: Fariborz Zangoui

Problem while transporting transfer rules in BW 3.5

Hi All,
I have a problem while transporting transfer rules in BW 3.5.
I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
The selections T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
Diagnosis
You need to select an individual DataSource based on the selection conditions
InfoSource =
Source System =
Object Version = T
Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
although the select event is not unique.
Procedure
Check the objects to which the selection applies.
Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
Regards
Lakshmi

Hi Lakshmi,
Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
Also make sure that the Transfer rules are active before it is transported.
Hope it helps!
Regards,
Pavan

Error in Transporting Transfer rule/structure to Q for generic DS

Hi,
We're in NW2004s. we're getting error when we transport Transfer Rules and Structure of generic data sources to Q.
In R3 Q the DS is active and it pulls data in RSA3 and it is replicated and all the fields are available in BW side as well, but when we transport TR/TS i still get error saying the Datasource is not active. This happens only for generic ones.
Any idea.
thanks
Mayil

Hi,
have you inserted both the transfer rule and the communication structure in the same change request?
When you transport an InfoSource, all it's dependent objects must be present in the same change request; in this way the datasource will be activated.
I hope it helps you,
Vito

Cannot See Transfer Rules in Transport Connection

Hello,
I have searched Notes and Forums and have not found a solution for this!
I performed some configuration in our newly upgraded BI system. We
were on BW 3.5 and upgraded to BI 7.0
We also change how our landscape was interconnected.
Our BW Dev system used to connect to our R3 Sandbox system.
Now our BIDev system connects to our ECC Dev system.
This is the first project i have worked on since the upgrade was
successful. What I am finding is that I get the following transport
error when I look at the STMS logs from BID to BIQ.
Transport Error
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
No activation possible.
Here are the details when I click to get more info on the error message:
Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
the transport connection to create a consistent request.
Wierd Behavior
The big issue now is that when i go to the transport connection in RSA1
and I want to collect Transfer Rules, I see a small subset of all the
transfer rules I would expect to see. I am looking specifically for
the transfer rules: 1_CO_PA2900010_DS PCDEVC200
Similiar behavior occurs when i am looking for "3.x DataSources" in the
transport connection
I can see these rules in other areas of RSA1 such as Infosources.
Please assist with finding these transfer rules in the Transport
connection.
Other then this transport both ECC and BI system landscapes are up and running normally.
Please help
Thanks!
Nick

Bryan,
Thanks for jumping onto this thread. I am going to complete the transports and see if i have any system name conversion issues to address. I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
To answer your questions:
1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS. The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
2. To what Source system do the transfer Rules belong to that you are missing?
---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
---Bryan: The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
Thanks!
Nick
Edited by: Nick Bertz on Dec 21, 2009 3:11 PM

Transports(transfer rule)Problem

Hi Experts,
Bi Patch :16   BI_CONT :8
We are moving from DEV to QA.i ve transported infoareas,infoobject catalogs and infoobjects.
now im trying to transport master data infosources UR and transfer rules.
im collecting the objects in the following manner.
Ex:0material
Grouping :in data flow before
collection mode : automatic
Here im unable see the transfer rules but UR and infosources are there.(in transport connection screen)
Conversion of logical system names
in Dev i didnt maintain any thing
in QA i ve mainted Conversion of logical system names as
*Original S S            Target S S
BI DEV                     BI QA
R3 DEV                    QA DEV
I havnt chkd the box 7.0.
Assgnment of source system to source system id
here i clicked on suggest source system ids
i ve AU and AU.
Even i did a trail with transporting the request to QA but no luck it ended with error 4,but not getting anything even info source or UR etc.........
Plz help me,suggest me solution its very urgent.
Thanks,
Yunus

hii check the foll links and award some points
Re: Transfer rule error
Re: Transfer structure problem

Cannot find transfer rules!!!

Hi,
I have to delete an InfoObject which is no longer required.
when I right click and hit delete I get an error message that the IO is being used in a Transfer Rules.
I have searched for that transfer rule but can't locate it.
Is there any way to know where this transfer rules is?
Thanks
NEWBW

I Got the following message when I looked for it in the Metadata Repository. Please help me proceed.
InfoSource ZZXXXX (Master Data) is not known
Message no. RSAR208
Diagnosis
The InfoSource is not known.
System response
The transfer rule maintenance cannot be called.
Procedure
If this concerns an InfoObject for the InfoSource, check whether an application component is assigned to the InfoObject. If not, assign an application component to the InfoObject.

Unable to transport transfer rules in BI 7(Partition in PSA)

Hi,
I want to activate T.R in Production but not able to that due to Partition in PSA.
Errors accessing partition parameters for table /BIC/B0000341000 (-> long text)
We used the programmed called RS_TRANSTRU_ACTIVATE_ALL but still the same error.
Even when we transported (T.R) from QA to PRD not able to transport to PRD with error 8.In the error analysis it is giving the same MSG u201CPSA partitionu201D
T.R: Transfer Rules
Object Type: Master data Text(0ACTIONREAS_TXT)
Thanks,
Gattu.
Thanks= Points in SDN

Laxman,
Try to repair PSA table at RSRV --> All Elementary Tests --> PSA Tables --> Consistency Between PSA Partitions and SAP Administration Information##.
After repair try to activate.
If still not working, then empty PSA data in production system (if not required...) and import transfer rules and activate if required.,
Hope it Helps
Srini

Cannot create transfer rules

Hello,
I activated the datasource 0UC_MTR_DOC in the source system and replicated the same into BI. But in BI the datasource shows as inactive. Then I went to the Tcode rsds and activated the datasource.
And then I activated the Business content infosource, 0UC_MTR_DOC, and then when trying to create a transfer rules to link the infosource and datasource, the system does not give me an option of 0UC_MTR_DOC, as the datasource. Why is this happening? I am confused. I tried creating a transformation, but even then I get the message that 'Transfornmation does not exist'.
Please help. Points will be awarded to helpful answers.
Regards,
Prince

Hi Prince,
If you want to replicate it as 3.x, you just go to RSA1 - DataSources and delete the datasource. Then, replicate it again, and when you are prompted for the Datasource type selection, select 3.x. Then, you should be able to activate Business Content and connect.
Then, you migrate the Update rules, InfoSource, Transfer rules and Datasource.
Hope this helps.
Regards,
Diego

Transporting Transfer rules

Hi All
Trasnfer rules are source system specific. In development say we have created them for BW-Dev to R/3 Dev. While transporting them to production. How will we change the assignment from BWDev-R/3DEv to BWprod-R/3 Prod.
Thanks PB

You are right,
but if you want to transport anything directly to your production environment you have to build a consequent landscape...where is your problem ?
We are talkin'about source system mapping assignment, but starting from the assumption that you can do this type of transport accordingly to your landscape !
Bye,
Roberto

Changing transfer method in transfer rules

I would like to change the transfer method in a TR.
It is set by default to IDoc.
I would like to set it to TRFC with PSA.
However, I can't because it is dimmed.
My aim is to find a workaround to an issue stated in SAP note 120446.
Thxs.
LauQ.

It is a Data Mart source in the same BW system.
I have created an Export DataSource from a PSA.
I cannot activate transfer rules due to a bug (note 120446).
This occurs because the transfer method is IDoc only.
I'm afraid that no solution exist for my problem.
Thxs.
LauQ

Urgent....Transported Update rules active version but still not active....

Hi Gurus,
i have changed a datasource and an ODSA
and this ODSA which also acts as a datamart to ODSB
so i have transported, transfer rules, transfer structure, infosource, update rules of ODSA and also the
update rules of ODSB as well
And before realsing the request into quality i have replicated the datasource from R/3 as well and then realsed this request to Quality everything is active like transfer rules, infosource, transfer structure
ODSA update rules
But the ODSB update rules are not active kindly tell how to make them active.
so again i have regenerated the export datasource and then again i transported only update rules of
ODSB.
but still the update rules are inactive, kindly someone guide me how to make them active
as i have to send this to production which is having 4 years of historical data so please kindly
help me.
thanks and regards
Harish

Hi A.H.P, vishvesh, anil, and buvanna
thankyou guys for your info and support i tried all that u have said
except activating them manually...as it is urgent i am going with manually activating
and vishvesh i could do check the update rules by basis help. thanks for that
A.H.P i have manually activated the update rules its working fine, so i am praying that everything should be fine in production as i have requested to have permissions to activate in prd as well
thankyou very much for all the support.
i am relieved that i have at last solved it
thanks and regards
harish

Transfer rules sourse system assignment change

Hi,
XAD -- Global APO system
AAD -- America APO system
GBD - Global BW system
ABD - America BW syste,
I transported, TR,Comm STru, UR from XAD to AAD
In XAD TR,Comm Str,UR pointed to GBD,
where as now i need TR,Comm Str,UR to point to ABD
when i double clieck the transported Transfer rules in AAD, i am getting error GBD doesnt exist
BDLS doesnt work here as ABD is already created in AAD
Looking for experts advise
Thanks
Praba

Hey. Do you have the system mappings maintained in AAD to convert GBD to ABD when transporting/importing updates? In the admin workbench it's just tools-conversion of logical system names. I'm guessing that's all it is. Have you ever transported from XAD to AAD? If not, I'm sure that's the issue.
Hope it's helped.

Unable to find the Transfer Rules in Transport Connection

Hi Guys,
I am on BW 3.5.
I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
Please help me on how to include this object in the Transport request created.
Thanks in advance.
Regards,
Tyson

Another way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
Cheers,
shana
Assigning pts is the way of saying thanks in SDN

Missing Transfer Rules in Selection Window for Transport

Hello,
Can somebody tell me why certain transfer rules are missing in the object selection list of the transport connection window? I am using BW 3.5.
Problem details:
I want to transport a transfer rule from a DEV box to a QA box. In the transport connection window, I clicked on "select objects" from under transfer rules in the middle panel. The object listing that followed showed only objects that start with numbers; no object we defined locally that starts with Z was included.
I also noticed that this appears to be a "funny" problem. One other computer connected to BW shows the correct listing while still another shows a different listing. Has this got to do with any setting?
Please help.
Wernel

Hi Wernel,
Its better to activate ur transfer rules once again. Also this Z* TRs would be displayed in last row of the Pop up window in the select Objects list.
or select them by grouping as before dataflow by selecting InfoSoruce.
Assign points if it helps...
Regards,
ARK

Cannot transport transfer rules!

Similar Messages

Maybe you are looking for