Cannot trust calculator 50g to give the right answer

50G gives the wrong answers:
Pick equation from Library:  APPS; Equation Library, F1, F1, Plane Geometry, Rectangle, F1, enter number for b and h, solve for A. ( Lets go with b=6, h=2, and A will become 12). So far so good.
Now R-Shift NUM.SLV; pick Solve Equation, Leave A the way it is, and change for example b, and solve for h.
Do that a couple of times sooner or later you will get Following:
A=12_cm sq
b=3_cm
h=3.99999999999_cm
You have a 50-50 chance of getting the right answer or something ending with .0000000001 or.99999999998 or whatever.
Deleting variables doesn't change much.
I have duplicated this on other 50G's, all running latest ROM.
Anyone has a solution?
Thanks

wolven wrote:
There is the right answer and there is the HP answer, that's as simple as that.
One would think that a calculator could do a job of an 8 year old.
Unfortunately 50g fails to do that in terms of speed and accuracy.
The HP-50g is correct  considering the constraints of a 12-digit machine.
I would like to encourage you to expand your understanding of numerical computations.
I would suggest you read material for example by Prof. W. Kahan.
Start with: A logarithm too clever by half
Now some calculators may seem to find the exact solution, but do they really? See the following on rounding:
http://www.cs.berkeley.edu/~wkahan/Mindless.pdf
(a shorter presentation on the subject: http://www.cs.berkeley.edu/~wkahan/Mind1ess.pdf )
If, after reading the above and doing some more research, you have more questions - please feel free to ask.
If you wish to have more accuracy, I could point you to programs that can help increase the accuracy of the 50g.
Kind regards.
Note: I do not work for HP, I just like playing with calculators :-)

Similar Messages

  • Reoder point calculation don't give the expected result

    Dear friends,
    We are using CBP to set reorder point (MRP type is VM).
    We've set the planned delivery time, on MRP2 view, as 120 days.
    When we run the forecast, the calculated basic value gives the expected
    result, but the reorder point don't.
    As we've set Planned delivery time as 120 days, we expect that the
    reorder point is "basic value"*4 (4 is the result 120/30). But the result
    of the reorder point is is greater (aprox. "basic value"*4,5).
    Can you please give me a help on this matter?
    Many thanks,
    Afonso Pereira

    you may get your expected result if you would use VB instead of VM.
    Manual Reorder Point Planning
    In manual reorder point planning, you define both the reorder level and the safety stock level manually in the appropriate material master.
    Automatic Reorder Point Planning
    In automatic reorder point planning, both the reorder level and the safety stock level are determined by the integrated forecasting program.
    The system uses past consumption data (historical data) to forecast future requirements. The system then uses these forecast values to calculate the reorder level and the safety stock level, taking the service level, which is specified by the MRP controller, and the material's replenishment lead time into account, and transfers them to the material master.
    Since the forecast is carried out at regular intervals, the reorder level and the safety stock level are continually adapted to the current consumption and delivery situation. This means that a contribution is made towards keeping stock levels low.

  • I just got a new iphone! I can't restore some in app content! The reason is I need to do the security questions. I'm 85% sure I put in the right answers but it's not working. Also when I try to reset it threw email I never get the message to fix it! Help!

    I have got a new iphone recently. But I can't restore in app purchases. I have tried many times to reset it threw email and never got the message. I know I'm checking the right email I get your advertising messages there. I'm 85% sure I'm using the right answers! This has been very frustrating! Please help make this right!

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    The reset link for the security question will send the email to your rescue email account : http://support.apple.com/kb/HT5312 -  that is the email account that you are checking, and you've checked the spam folder on it as well as the inbox, and tried clicking the reset link again ?
    If you aren't receivineg the email then you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the HT5312 link above to view your rescue email address to check that it's correct, in case you need to use it in the potential future use

  • My dad can't remember his iCloud password, and doesn't have the right answers to his security questions. Any other ways to reset a password?

    My dad can't remember his iCloud password, and doesn't have the right answers to his security questions. Any other ways to reset a password?

    Open > http://iforgot.apple.com and choose Email authentication

  • How can i pass the cmrs-100-certified medical reimbursement specialist exam, ed.3 hitting up all the right answers?

    How can I prepare for the cmrs-100-certified medical reimbursement specialist exam, ed.3 hitting up all the right answers? because I do not want to fail this test.
    Sincerely,
    SonnyBoy

    How can I prepare for the cmrs-100-certified medical reimbursement specialist exam, ed.3 hitting up all the right answers? because I do not want to fail this test.
    Sincerely,
    SonnyBoy

  • Cannot Install Sql Server 2008, Gives The Error "Database Engine Services Failed"

    I cannot install Sql Server 2008 R2 on Windows 8. Tried many times but failed because it gives the error "Database
    Engine Services Failed". Sql files cannot be corrupted because i can install the same setup on Windows 7 and i can connect to databases.
    I tried all the things below;
    * I'm uninstalling everything related with Sql Server from Control Panel/Programs And Features.
    * I'm deleting all the keys related with Sql Server from Regedit.
    * Later i'm restarting windows, and trying to install again. But during the install it gives the error "Database
    Engine Services Failed", install is finishing but when i opened the Management Studio i cannot connect to Database Engine with Sa naturally.
    * My firewall is already closed. And i have not any antivirus software.
    * I gave the permission for port 1433 on firewall.
    Please help me. Why i always take "Database Engine Services Failed" error? I will get crazy cause of that for many days.

    Here's the ERRORLOG file which i found under the folder;
    Microsoft SQL Server/MSSQL10_50.MSSQLSERVER/MSSQL/Log.
    2014-09-27 03:39:40.15 Server      Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (X64) 
    Apr  2 2010 15:48:46 
    Copyright (c) Microsoft Corporation
    Developer Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
    2014-09-27 03:39:40.15 Server      (c) Microsoft Corporation.
    2014-09-27 03:39:40.15 Server      All rights reserved.
    2014-09-27 03:39:40.15 Server      Server process ID is 5768.
    2014-09-27 03:39:40.15 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '350V5C/350V5X/350V4C/350V4X/351V5C/351V5X/351V4C/351V4X/3540VC/3540VX/3440VC/3440VX'.
    2014-09-27 03:39:40.15 Server      Authentication mode is MIXED.
    2014-09-27 03:39:40.15 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
    2014-09-27 03:39:40.15 Server      Registry startup parameters: 
    -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
    -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
    -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
    2014-09-27 03:39:40.15 Server      Command Line Startup Parameters:
    -m SqlSetup
    -f
    -Q
    -q Turkish_CI_AS
    -T 4022
    -T 4010
    -T 3659
    -T 3610
    2014-09-27 03:39:40.18 Server      Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically.  After
    the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
    2014-09-27 03:39:40.18 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2014-09-27 03:39:40.18 Server      Detected 4 CPUs. This is an informational message; no user action is required.
    2014-09-27 03:39:40.31 Server      Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
    2014-09-27 03:39:40.32 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2014-09-27 03:39:40.43 Server      Node configuration: node 0: CPU mask: 0x000000000000000f:0 Active CPU mask: 0x000000000000000f:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
    only. No user action is required.
    2014-09-27 03:39:40.45 Server      Support for distributed transactions was not enabled for this instance of the Database Engine because it was started using the minimal configuration option. This is an informational message only. No user action
    is required.
    2014-09-27 03:39:40.45 spid7s      Warning ******************
    2014-09-27 03:39:40.45 spid7s      SQL Server started in single-user mode. This an informational message only. No user action is required.
    2014-09-27 03:39:40.46 spid7s      Starting up database 'master'.
    2014-09-27 03:39:40.52 spid7s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
    2014-09-27 03:39:40.58 spid7s      SQL Server was started using the -f flag. SQL Server Audit is disabled. This is an informational message. No user action is required.
    2014-09-27 03:39:40.59 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:40.59 spid7s      Server started with '-f' option. Auditing will not be started. This is an informational message only; no user action is required.
    2014-09-27 03:39:40.59 spid7s      Starting up database 'mssqlsystemresource'.
    2014-09-27 03:39:40.61 spid7s      The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
    2014-09-27 03:39:40.94 spid7s      Password policy update was successful.
    2014-09-27 03:39:40.94 spid8s      Starting up database 'model'.
    2014-09-27 03:39:40.95 spid7s      Server name is 'CAGATAY'. This is an informational message only. No user action is required.
    2014-09-27 03:39:41.21 spid8s      Clearing tempdb database.
    2014-09-27 03:39:41.21 spid10s     A new instance of the full-text filter daemon host process has been successfully started.
    2014-09-27 03:39:41.24 Server      A self-generated certificate was successfully loaded for encryption.
    2014-09-27 03:39:41.24 Server      Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
    2014-09-27 03:39:41.24 Server      Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag
    7806. This is an informational message only. No user action is required.
    2014-09-27 03:39:41.28 Server      The SQL Server Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b, state: 3. Failure to register an SPN may cause integrated authentication
    to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
    2014-09-27 03:39:41.28 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
    2014-09-27 03:39:41.70 spid8s      Starting up database 'tempdb'.
    2014-09-27 03:39:41.86 spid7s      Warning ******************
    2014-09-27 03:39:41.86 spid7s      Attempting to change default collation to Turkish_CI_AS.
    2014-09-27 03:39:41.92 spid7s       index restored for master.syspriorities.
    2014-09-27 03:39:41.95 spid7s       index restored for master.sysbrickfiles.
    2014-09-27 03:39:41.96 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:41.96 spid7s       index restored for master.sysowners.
    2014-09-27 03:39:42.13 spid7s       index restored for master.sysdbreg.
    2014-09-27 03:39:42.16 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.16 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.16 spid7s       index restored for master.sysschobjs.
    2014-09-27 03:39:42.17 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.17 spid7s       index restored for master.syscolpars.
    2014-09-27 03:39:42.17 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.18 spid7s       index restored for master.sysxlgns.
    2014-09-27 03:39:42.18 spid7s       index restored for master.sysxsrvs.
    2014-09-27 03:39:42.18 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.18 spid7s       index restored for master.sysnsobjs.
    2014-09-27 03:39:42.18 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.18 spid7s       index restored for master.syscerts.
    2014-09-27 03:39:42.19 spid7s       index restored for master.sysrmtlgns.
    2014-09-27 03:39:42.19 spid7s       index restored for master.sysxprops.
    2014-09-27 03:39:42.19 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.19 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.31 spid7s       index restored for master.sysscalartypes.
    2014-09-27 03:39:42.31 spid7s       index restored for master.sysidxstats.
    2014-09-27 03:39:42.31 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysendpts.
    2014-09-27 03:39:42.32 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysclsobjs.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysremsvcbinds.
    2014-09-27 03:39:42.32 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.32 spid7s       index restored for master.sysrts.
    2014-09-27 03:39:42.33 spid7s       index restored for master.sysasymkeys.
    2014-09-27 03:39:42.33 spid7s       index restored for master.syssqlguides.
    2014-09-27 03:39:42.44 spid7s       index restored for master.syssoftobjrefs.
    2014-09-27 03:39:42.47 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.48 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.49 spid7s       index restored for master.spt_values.
    2014-09-27 03:39:42.49 spid7s       index restored for master.MSreplication_options.
    2014-09-27 03:39:42.56 spid7s       index restored for tempdb.syspriorities.
    2014-09-27 03:39:42.56 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.57 spid7s       index restored for tempdb.sysowners.
    2014-09-27 03:39:42.57 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.57 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.57 spid7s       index restored for tempdb.sysschobjs.
    2014-09-27 03:39:42.57 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.59 spid7s       index restored for tempdb.syscolpars.
    2014-09-27 03:39:42.60 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.sysnsobjs.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.syscerts.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.sysxprops.
    2014-09-27 03:39:42.60 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.60 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.60 spid7s       index restored for tempdb.sysscalartypes.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysidxstats.
    2014-09-27 03:39:42.61 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysclsobjs.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysremsvcbinds.
    2014-09-27 03:39:42.61 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.61 spid7s       index restored for tempdb.sysrts.
    2014-09-27 03:39:42.62 spid7s       index restored for tempdb.sysasymkeys.
    2014-09-27 03:39:42.69 spid7s       index restored for tempdb.syssqlguides.
    2014-09-27 03:39:42.69 spid7s       index restored for tempdb.syssoftobjrefs.
    2014-09-27 03:39:42.75 spid7s       index restored for model.syspriorities.
    2014-09-27 03:39:42.75 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.75 spid7s       index restored for model.sysowners.
    2014-09-27 03:39:42.76 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.76 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:42.76 spid7s       index restored for model.sysschobjs.
    2014-09-27 03:39:42.76 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s       index restored for model.syscolpars.
    2014-09-27 03:39:43.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysnsobjs.
    2014-09-27 03:39:43.00 spid7s       index restored for model.syscerts.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysxprops.
    2014-09-27 03:39:43.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysscalartypes.
    2014-09-27 03:39:43.00 spid7s       index restored for model.sysidxstats.
    2014-09-27 03:39:43.01 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysclsobjs.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysremsvcbinds.
    2014-09-27 03:39:43.01 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysrts.
    2014-09-27 03:39:43.01 spid7s       index restored for model.sysasymkeys.
    2014-09-27 03:39:43.01 spid7s       index restored for model.syssqlguides.
    2014-09-27 03:39:43.01 spid7s       index restored for model.syssoftobjrefs.
    2014-09-27 03:39:43.02 spid7s      Starting up database 'msdb'.
    2014-09-27 03:39:43.82 spid7s       index restored for msdb.syspriorities.
    2014-09-27 03:39:43.85 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:43.93 spid7s       index restored for msdb.sysowners.
    2014-09-27 03:39:43.99 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.00 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.09 spid7s       index restored for msdb.sysschobjs.
    2014-09-27 03:39:44.12 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.20 spid7s       index restored for msdb.syscolpars.
    2014-09-27 03:39:44.20 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.20 spid7s       index restored for msdb.sysnsobjs.
    2014-09-27 03:39:44.20 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.25 spid7s       index restored for msdb.syscerts.
    2014-09-27 03:39:44.25 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.26 spid7s       index restored for msdb.sysxprops.
    2014-09-27 03:39:44.26 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.26 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.27 spid7s       index restored for msdb.sysscalartypes.
    2014-09-27 03:39:44.37 spid7s       index restored for msdb.sysidxstats.
    2014-09-27 03:39:44.41 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.42 spid7s       index restored for msdb.sysclsobjs.
    2014-09-27 03:39:44.42 spid7s       index restored for msdb.sysremsvcbinds.
    2014-09-27 03:39:44.42 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.42 spid7s       index restored for msdb.sysrts.
    2014-09-27 03:39:44.54 spid7s       index restored for msdb.sysasymkeys.
    2014-09-27 03:39:44.54 spid7s       index restored for msdb.syssqlguides.
    2014-09-27 03:39:44.59 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.74 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:44.85 spid7s       index restored for msdb.syssoftobjrefs.
    2014-09-27 03:39:44.89 spid7s       index restored for msdb.syspolicy_policies_internal.
    2014-09-27 03:39:44.90 spid7s       index restored for msdb.sysproxies.
    2014-09-27 03:39:44.90 spid7s       index restored for msdb.syscollector_execution_stats_internal.
    2014-09-27 03:39:44.90 spid7s       index restored for msdb.syssubsystems.
    2014-09-27 03:39:44.91 spid7s       index restored for msdb.log_shipping_primary_secondaries.
    2014-09-27 03:39:44.91 spid7s       index restored for msdb.sysdownloadlist.
    2014-09-27 03:39:44.91 spid7s       index restored for msdb.log_shipping_monitor_primary.
    2014-09-27 03:39:44.92 spid7s       index restored for msdb.sysoriginatingservers.
    2014-09-27 03:39:44.93 spid7s       index restored for msdb.log_shipping_monitor_history_detail.
    2014-09-27 03:39:44.95 spid7s       index restored for msdb.log_shipping_monitor_error_detail.
    2014-09-27 03:39:44.95 spid7s       index restored for msdb.log_shipping_secondary.
    2014-09-27 03:39:44.97 spid7s       index restored for msdb.log_shipping_secondary_databases.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.log_shipping_monitor_secondary.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.sysjobs.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.sysutility_ucp_mi_file_space_health_internal.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.sysutility_ucp_mi_database_health_internal.
    2014-09-27 03:39:45.10 spid7s       index restored for msdb.syscollector_blobs_internal.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysutility_mi_dac_execution_statistics_internal.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysjobsteps.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysutility_ucp_dac_file_space_health_internal.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.logmarkhistory.
    2014-09-27 03:39:45.11 spid7s       index restored for msdb.sysutility_mi_session_statistics_internal.
    2014-09-27 03:39:45.12 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.12 spid7s       index restored for msdb.sysdtscategories.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.syspolicy_target_sets_internal.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.sysutility_ucp_mi_volume_space_health_internal.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.sysschedules.
    2014-09-27 03:39:45.33 spid7s       index restored for msdb.sysdac_instances_internal.
    2014-09-27 03:39:45.33 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.50 spid7s       index restored for msdb.sysssispackages.
    2014-09-27 03:39:45.51 spid7s       index restored for msdb.sysutility_ucp_computer_cpu_health_internal.
    2014-09-27 03:39:45.51 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.52 spid7s       index restored for msdb.sysssispackagefolders.
    2014-09-27 03:39:45.52 spid7s       index restored for msdb.sysdac_history_internal.
    2014-09-27 03:39:45.53 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.syscategories.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.systargetservers.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.systargetservergroups.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.syspolicy_policy_category_subscriptions_internal.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.sysalerts.
    2014-09-27 03:39:45.62 spid7s       index restored for msdb.sysoperators.
    2014-09-27 03:39:45.63 spid7s       index restored for msdb.syspolicy_system_health_state_internal.
    2014-09-27 03:39:45.63 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.63 spid7s       index restored for msdb.syscollector_config_store_internal.
    2014-09-27 03:39:45.65 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.65 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.65 spid7s       index restored for msdb.sysmanagement_shared_server_groups_internal.
    2014-09-27 03:39:45.66 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.66 spid7s       index restored for msdb.sysutility_mi_smo_properties_to_collect_internal.
    2014-09-27 03:39:45.66 spid7s       index restored for msdb.sysmanagement_shared_registered_servers_internal.
    2014-09-27 03:39:45.66 spid7s       index restored for msdb.syscachedcredentials.
    2014-09-27 03:39:45.79 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.79 spid7s       index restored for msdb.syscollector_collection_sets_internal.
    2014-09-27 03:39:45.79 spid7s       index restored for msdb.sysutility_ucp_dac_health_internal.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.MSdbms.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.MSdbms_datatype.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.sysmail_profile.
    2014-09-27 03:39:45.80 spid7s       index restored for msdb.sysutility_ucp_managed_instances_internal.
    2014-09-27 03:39:45.83 spid7s       index restored for msdb.syspolicy_management_facets.
    2014-09-27 03:39:45.84 spid7s       index restored for msdb.sysutility_ucp_mi_health_internal.
    2014-09-27 03:39:45.86 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.86 spid7s       index restored for msdb.syscollector_collector_types_internal.
    2014-09-27 03:39:45.86 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.86 spid7s       index restored for msdb.syspolicy_configuration_internal.
    2014-09-27 03:39:45.87 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.87 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.87 spid7s       index restored for msdb.syspolicy_facet_events.
    2014-09-27 03:39:45.87 spid7s       index restored for msdb.sysmail_account.
    2014-09-27 03:39:45.87 spid7s       index restored for msdb.syspolicy_conditions_internal.
    2014-09-27 03:39:45.88 spid7s       index restored for msdb.sysutility_ucp_health_policies_internal.
    2014-09-27 03:39:45.88 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:45.88 spid7s       index restored for msdb.syscollector_collection_items_internal.
    2014-09-27 03:39:45.90 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.00 spid7s       index restored for msdb.sysmail_servertype.
    2014-09-27 03:39:46.00 spid7s       index restored for msdb.sysutility_ucp_filegroups_with_policy_violations_internal.
    2014-09-27 03:39:46.02 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.03 spid7s       index restored for msdb.sysutility_ucp_policy_check_conditions_internal.
    2014-09-27 03:39:46.03 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.03 spid7s       index restored for msdb.sysutility_ucp_configuration_internal.
    2014-09-27 03:39:46.03 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.03 spid7s       index restored for msdb.sysutility_ucp_policy_target_conditions_internal.
    2014-09-27 03:39:46.04 spid7s       index restored for msdb.sysmail_server.
    2014-09-27 03:39:46.04 spid7s       index restored for msdb.syspolicy_policy_categories_internal.
    2014-09-27 03:39:46.04 spid7s       index restored for msdb.syspolicy_object_sets_internal.
    2014-09-27 03:39:46.04 spid7s      Index creation operation will use 1024 KB of memory specified in the advanced sp_configure option "min memory per query (KB)" instead of 704 KB specified in "index create memory (KB)" option
    because the former has to be smaller than the latter.
    2014-09-27 03:39:46.05 spid7s       index restored for msdb.sysmail_configuration.
    2014-09-27 03:39:46.05 spid7s       index restored for msdb.sysdbmaintplan_databases.
    2014-09-27 03:39:46.05 spid7s       index restored for msdb.log_shipping_primary_databases.
    2014-09-27 03:39:46.39 spid7s      The default collation was successfully changed.
    2014-09-27 03:39:46.39 spid7s      Recovery is complete. This is an informational message only. No user action is required.
    2014-09-27 03:39:47.17 spid51      Changed database context to 'master'.
    2014-09-27 03:39:47.18 spid51      Changed language setting to us_english.
    2014-09-27 03:39:47.72 spid51      Setting database option RECOVERY to FULL for database model.
    2014-09-27 03:39:47.84 spid51      Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.84 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:47.98 spid51      Configuration option 'default language' changed from 0 to 0. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.98 spid51      Configuration option 'default full-text language' changed from 1033 to 1033. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.98 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:47.98 spid51      Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.
    2014-09-27 03:39:47.98 spid51      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
    2014-09-27 03:39:48.27 spid51      Error: 15007, Severity: 16, State: 1.
    2014-09-27 03:39:48.27 spid51      '' is not a valid login or you do not have permission.
    2014-09-27 03:51:25.13 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:51:25.13 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    2014-09-27 03:51:32.67 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:51:32.67 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    2014-09-27 03:51:42.11 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:51:42.11 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:52:42.07 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:52:42.07 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:53:01.23 Logon       Error: 18461, Severity: 14, State: 1.
    2014-09-27 03:53:01.23 Logon       Login failed for user 'CAGATAY\cagatay'. Reason: Server is in single user mode. Only one administrator can connect at this time. [CLIENT: <local machine>]
    2014-09-27 03:53:17.57 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:53:17.57 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    2014-09-27 03:53:32.54 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:53:32.54 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:54:04.29 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:54:04.29 Logon       Login failed for user 'CAGATAY\cagatay (cagatay)'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:54:10.36 Logon       Error: 18456, Severity: 14, State: 5.
    2014-09-27 03:54:10.36 Logon       Login failed for user 'CAGATAY\cagatay'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]
    2014-09-27 03:54:47.18 Logon       Error: 18456, Severity: 14, State: 8.
    2014-09-27 03:54:47.18 Logon       Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]
    Resolve the error, please refer to the following links.
    Enable DAC:http://www.mssqltips.com/sqlservertip/2538/enabling-dedicated-administrator-connection-in-sql-server-2008-express-edition/
    could not register the SPN Kerberos:
    http://saveadba.blogspot.com/2012/03/could-not-register-spn-kerberos.html  
    Make sure the password of sa is correct,and the login 'CAGATAY\cagatay' has been created in SQL Server

  • Who can give the right information to receive my email via iCloud on a iMac with Snow Leopard? It can't be upgraded to Lion.

    I still have problems since migrating to iCloud with receiving email through my Mail app on my iMac running Snow Leopard 10.6.8 (and it can't be upgraded to Lion). Like I found on different places on internet, in Mail Preferences I made a new account, once with imap.mail.me.com and once with p02-imap.mail.me.com, like differently advised. Sometimes it works, sometimes not, untill I fill in again and again the advised changes in the Preferences.
    Is there a good advise arround to have my settings once and for all running well, as I expect from Apple stuff? Is Apple listening to the many complaints on this iCloud matter, or is my Apple Micro becoming too Soft to be heard?
    Thank you beforehand for helping me (and many others). Best regards,
    Jerome from Belgium

    Dear Roger and all interested,
    Right you are with stating you can't have MobileMe and iCloud at the same time. To explain the history of my problem:
    I have a small network of 3 computers: 1) MacBook Air 1.6 GHz Intel Core 2 Duo - 2) iMac 2.66 GHz Intel Core i5 - 3) iMac 2 GHz Intel Core Duo
    For the first time hesitating to upgrade as soon as a new system is available, a friend nevertheless could convince me of the usefullness of Lion and iCloud. During upgrading process I found out that my - 3) iMac just was narrowly to "old" for Lion.
    And indeed the migration from MobileMe to iCloud went almost automatically. But quite soon I established that my "old" iMac was no more receiving @mac.com mail. Having a look to the preferences of Mail, I couldn't change anything as I had no more MobileMe access, being migrated to iCloud. Apple information told me to select "Mail, Contacts & Calendars" in the System Preferences, but Snow Leopard has no such thing.
    Search on internet told me more or less how to set up an IMAP account in Snow Leopard in Mail preferences with as server address "imap.mail.me.com" with SSL on and use of port 993. This shortly worked. After restart no more. Setting up the account again and again, sometimes working, sometimes not. This is not exactly an almost automatically migration. Some other information told me to use "p02-imap.mail.me.com".
    Current situation: after start up, a window from Mail asks me to give my password for the account on the MobileMe IMAP-server "mail.me.com" (which I expected to be "p02-imap.mail.me.com"). Password not accepted, retry and retry, then just click on Cancel. Result: iCloud account has a kind of lightning symbol next to it (= not working). I click on the symbol, one time it disappears and the account works, one time it asks for the password again, and again not accepted. Repeating this procedure untill it works. So for 3 days I realized to make it finally working up to now, but all this does not look to be the right way and doesn't sound a too reassuring situation to me.
    When I look at Mail preferences in Snow Leopard now:
    Account Type: MobileMe IMAP
    Incoming Mail Server: mail.me.com (expected here p02-imap.mail.me.com)
    Outgoing Mail Server (SMTP): p02-imap.mail.me.com
    (Advanced) Authentication: Apple Token
    What I find in preferences (automatically established) on my Lion computers:
    Account Type: iCloud IMAP
    Incoming Mail Server: p99-imap.mail.me.com (shows grey)
    Outgoing Mail Server (SMTP): smtp.me.com
    (Advanced) Authentication: Password (no Apple Token option)
    So I tried to make Snow Leopard Mail similar based on the Lion preferences:
    Account Type: MobileMe IMAP (found no way to change to iCloud IMAP)
    Incoming Mail Server: mail.me.com (shows grey, found no way to change to "p99-imap.mail.me.com")
    Outgoing Mail Server (SMTP): smtp.me.com
    (Advanced) Authentication: Password (no Apple Token option)
    Same result as before: asks for password, which I have to cancel, then click away the lightning symbol, after which it works (but perhaps not tomorrow).
    Best regards,
    Jerome from Belgium

  • How to close a topic and reply who give us the right answer ?

    Hi
    How can i close a solved topic ?
    Just marking the Answer with the checkboxes (with calification 10)   (But does expert who give the answer receives a message ?)
    or  doing a reply to expert's answer that give the solution ?
    Thanks

    if answers really helped give appropriate points & close
    else u can find one checkbox left side to ur post under ur namelike solved on my own..use that to close
    Message was edited by: Venkat

  • Reverse Engineer in models doesnt give the right structure from Essbase

    Hi,
    I have created Hyperion essbase(source)/Oracle(target) Data sources,Physical Schemas,Logical Scemas and have linked them with the context.
    When I create a model - I hadTechnology as Essbaseand the right physical schema -
    In the reverse engineer tab, I have correctly selected RKM Hyperion Essbase,Types pf objects is table.I had set True to multipls columns and had given the data column as Accounts - and the data column members as "Sales","Cogs"
    Now when I reverse engineer, I assumed the columns should be populated as (dim1,dim2,Sales,Cogs) - But what i get is (dim1,dim2,Account,Sales,Cogs,Data) - The account member and data also comes along in the column. Any idea where i am missing out this?
    Eventually when i execute the interface, I am ending up in an error "com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Invalid column in the source"
    Please share your thoughts...
    Leo jose.

    Hi,
    Please ignore, it is just that when a model is reverse engineered, it is having the old in memory and the new changes made in the model is getting appended along with the old dimension information creating some confusion.just did it with a different application and is giving desired results.I asked and I answered :)

  • HT1420 I can't use the new I pad on I store its asking for job questions which I don't no the answer I put the right answer and its sayin wrong

    I bought a new I pad I want to download some movies I am going away tonight and its asking for job security questions at which I put the answers and it says wrong I can't remember what I put years ago what do I do I just bought a $100 I tunes card

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if the instructions on this user tip helps you get them reset : https://discussions.apple.com/docs/DOC-4551

  • HT5699 i can't buy  a song because it ask me for security questions and i answer and it says you did not  provide the right answer

    i can't buy  a song because it ask me for security questions and i answer and it says you did not  provide the right answer

    Go back to the article you asked this question from and pick a method of contacting Apple. Posting in these boards isn't one of them.
    (103148)

  • Which one is the right answer?

    SELECT LPAD(salary,10,*)
    FROM EMP
    WHERE EMP_ID = 101;
    Thanks everybody for your reply. well without '*' its always going to be an error...should've seen it earlier. Sorry for wasting your time. I am still trying to learn pl/sql and found this sample question somewhere on the net.
    I have a new question:
    Can we delete a row from a table if the table is referenced by a foreign key in another table but the second table doesn't hold any relevant data for that row?
    Thanks for your time.

    I know that trying these things by oneself is really, really difficult. It is much easier to ask on the forums or on the internet.
    So I will provide you with a console session.
    SQL> connect test/test
    Connected.
    SQL> create table emp ( emp_id number, salary number);
    Table created.
    SQL> insert into emp values (101, 17000);
    1 row created.
    SQL> commit;
    Commit complete.
    SQL> SELECT LPAD(salary,10,*)
       2  FROM EMP
       3  WHERE EMP_ID = 101;
    SELECT LPAD(salary,10,*)
    ERROR at line 1:
    ORA-00936: missing expression
    SQL> 1
      1* SELECT LPAD(salary,10,*)
    SQL> c/*/'*'/
      1* SELECT LPAD(salary,10,'*')
    SQL> l
      1  SELECT LPAD(salary,10,'*')
      2  FROM EMP
      3* WHERE EMP_ID = 101
    SQL> /
    LPAD(SALARY,10,'*')
    *****17000Based on the above, you need to make up your own mind as to the correct answer.

  • Flash Pro CS5.5 gives the right warning when JVM virtual memory is out. Thumbs up!

    In version 5.5, Flash PRO gives an exhaustive warning when JVM runs out of memory and cannot compile large projects.
    The popup gives you the correct informations, and also opens for you the jvm.ini file in flash ide to increase memory.
    Thumbs up Adobe!
    That is awesome!

    Hi all,
    I've got the combination of solutions working from what i've read on the forums and this is my solution which worked atleast for Adobe Premiere Pro CS 5.5 Family:
    Solution Adobe Premiere Pro CS 5.5 Family:
    Browse to \Installation\Adobe CS5.5\payloads
    1: Start with backing up your files which gave an error in the log: In my case, it first gave an error on the "Microsoft_VC80_CRT_X86" later when I fixed this .MSI package it also gave an error on the "Microsoft_VC90_CRT_X86" file. So I made a backup of the 2 folders which are indicated "RED" in the picture below.
    2: Copy from the green directory, the files which are in the image below
    3. Paste the 2 files into the X86 folder as in the image below, delete the 2 files which are indicated red by the image below, and then adjust the new files to the same name as the files which were deleted:
    4: You will probably have to do this twice for the different errors.
    Extra step 5: I'm mentioning this step because im not sure if this helped, but I also uninstalled the MSI files to be sure there was nothing left behind of the old installer.
    Hope this helps, I will try the same for After Effects and let you know if this also works.

  • I need to completely remove WebRoot from my Macbook Air and cannot. Please point me in the right direction

    I have purchased another security system for my Mackbook Air and my required PC. I now cannot remove Webroot security from my Mac. It responds to me that I do not have "the authority.....", cannot because "it is in use elsewhere", etc. I am using Finder and when I ask to move the application, Finder asks me for my authority password and acts like it is doing the job, but up pops the reason (above) why I can't. I'm not an experienced user of the Mac product but like it a lot. Hopefully, someone can give me a hint. Thanks in advance!
    rmb

    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    You may have to log out or reboot in order to complete an uninstallation.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

  • HT1937 Why can't apple give the right settings to Giffgaff for us to be able to tether?! Please apple sort it out or someone else tell me how?!

    Please apple give Giffgaff the settings they need to help us users tether!!

    Defiled:
    I did sign a two year contract and completed that contract. The 3gs is no longer in service. My daughter is going overseas to protect you and your family. I was attempting to find a way for her to have a reliable phone that could offer her some connection with home as she travels through the middle east.  She travels in missions all over.
    At&T unlocks other phones of theirs why not the iPhone?  AT&T says that Apple will not give them the code, it is not the carrier.  If I would have known this situation would have come up I would have bought and unlocked 3gs phone"Deggie" .  My main complaint is that Apple has not good excuse as to why they will not allow their phones to be unlocked from services well, AT&T .  I bought the phone full price, completed the contract terms, even went for and iPhone 4 with another2 year contract, along with owning an apple computer... I love the product.  My main issue is give me a good answer as to why you won't allow a phone to be unlocked. It doesn't hurt Apple, People still have to buy the phones from them, and use their App store and iTunes.
    Sorry, just upset about my daughter heading over there, boots on the ground, and just pray she will be safe. Would have liked to facetime her while she is in the airports and in specific areas allowed for that.
    Please don't come down on me for asking this question. I understand all the contracts etc.... but to single out the iPhone specifically to not unlock after contract is over does not seem fair.
    Thank you for your responses.

Maybe you are looking for